Liczymy pasujące modele…
Print with the flat part of the grip on the print bed with supports. I used a threshold angle of 10 degrees with snug supports! Feel free to get this directly from me here: https://dildesigns3d.etsy.com
I designed this because the existing models on the internet were either paid or not well made. It fits snugly and does not slide off. The current version turned out to be slightly smaller than expected, but it still fits my (average size)…
A simple protective case for the Anbernic 35XX “H” handheld. Features: Slim profile hinge dual-latch closure cutout for USB-C charging while it's in the case View port for charging LED status while in the case and charging Prints easily…
This highly detailed 3D model depicts a futuristic cybernetic hand . The design combines elements of robotics and biomechanics, showcasing intricate cable systems, mechanical joints, and armored plating. The fingers are segmented and…
I wanted some better ergonomics while I played my games. I remixed the grips from STR to fit the RG35XX. It's a snug fit. Printed in PLA with supports on build plate.
Miniature of Real Madrid stadion Print Layer high: max 0.3 mm infill: 15% material: PETG, PLA
A scale model of the tabernacle of Moses according to Exodus 25. For visual representation, scale is not exact. Print instructions Print 100%. Make sure the Slicers can distinguish the 7 Candle sticks.
The Anbernic RG35XX H is a retro handheld emulation game console that runs on Linux. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective…
Here my Guide Rail Holder for your Systainer T-Loc Box Tower. Set Bottom Part to the bottom Box and the Top Part to the upper Box and slide in your Guide Rail ;) Update 13/01/2022 -add stronger plate to the bottom part -add a pair of…
This case is made of two halves that can be connected with either a length of filament, or the use of #16 finish nails as “hinge pins” to connect them together. The case features a slot in the back to use as a display stand when not being…
IF YOU NEED THE EPIC ULTRA FOR THE "RG351MP" ( Metal Plus) FOLLOW THIS LINK!!!: https://www.printables.com/model/240177-anbernic-rg351mp-game-pad-epic-ultra Please respect the Licence the thing comes with! Thanks Thanks to Thingiverse…
Print this with the top side of the clip down. I printed with supports with a 10% support angle threshold. You shouldn't need a brim depending on your plate, but I printed previous versions with a brim just to be sure! Feel free to get…
"BerninaFeet.stl" is a model for a Bernina Sewing Machine Foot Holder to hold 2 large and 2 small sewing machine feet. "BerninaFeet2.stl" is a model for a Bernina Sewing Machine Foot Holder to hold 5 small sewing machine feet. My wife…
In collaboration with HyperPlay RPG , I have designed a grip for the RG35XX H games console. Print with supports 15% infill 0.2 mm layer height See HyperPlay RGP's review of the grip here: I also sell this on my website and Etsy store ,…
I created a Measuring Tool for my Systainer to fast determine my loose screws up to 70mm length and diameter from 2mm to 6mm.
Spacers to increase the Omni's armrest sliding resistance - one for the right, and one for the left. They're different since the left needs to accommodate the cable for the electronics. Recommended printing settings: I used PLA+ but…
Come join this collaborative project to create the Tabernacle of Moses (Mishkan) as described in Exodus, with its courtyard and objects! Here is the link for the group I just created, and I am hoping others will want to join in to make…
This highly detailed 3D bust pays tribute to one of the most iconic cybernetic characters in sci-fi history. Half human, half machine – this model captures the raw power and stoic intensity of a futuristic warrior with a damaged exterior…
This is a simple stand for the Anbernic RG35XX. I was having some trouble with bed adhesion so I added tiny tabs on the corners that are easy to cut off and added that as a second STL file. They are 0.15mm tall so they should only be 1-2…
A comfort grip (for when the device is opened/in play) and a standing case (for when the clamshell is closed) for the iconic Anbernic RG35XX SP. It has access to all the ports on the side and bottom of the device. It can be printed with…
Information about the model: Inside the case there is about 1mm of play on each side so that foam rubber or similar damping can be attached. The lower shell (Part_2) has an elevation so that the shoulder buttons are not pressed in.…
Anbernic RG351p case. Designed to be printed as one model without supports The height of the case is made to add the original white foam that is added in the box with the console. If you don't have this foam the console rattles a little…
Friends of ours love cosplay and what better way to handle a terrible situation with the loss of hair due to chemo, than to turn up as a Cybernetic character from Star Wars ; ) Cheers Jace Sizing should fit a large adult, but do check the…
If you like this model, show some love, hit the like button. Version 2 of the ergonomic grip for the Anbernic RG 35XX (RG35XX). Now has rounder corners for comfort and different printing orientation. Print in PLA Needs supports
Add modern comfort to your miniature scenes with this collection of STL files featuring contemporary sofas and chairs. This pack includes realistic models inspired by Bernhardt and BoConcept designs, ideal for dollhouses, dioramas,…
The Anbernic RG35XXSP is a retro handheld emulation game console that runs on Linux. It's design is boxy and this is for people who want a little bit more grip to the console, but still keep the slim and portable nature of the console. I…
UPDATE [4/30/26]: In lieu of Libernovo changing the hollow square slot to be solid, I have designed a newer version that will work with all models and is stronger. After taking apart my armrest after months of using the first version, I…
A simple stand base for the Anbernic RG40XXV. (3 variants: simple, "RG40XXV" inset text, "RG40XXV" outset text). In the picture you can see it printed in White PETG (PLA works too), 0.15mm layer height (you can go higher but you will get…
A statue modeled and painted of a bernedoodle dog, but looks very similar to other dogs (especially other doodles). Print multicolor with your dog's colors, paint the model in the slicer to match your dog, or print single color. Great to…
This case is made of two halves that can be connected with either a length of filament, or the use of #16 finish nails as “hinge pins” to connect them together. The case features a slot in the back to use as a display stand when not being…
Eine kleine Krippe, modelliert in Anlehnung an das alte Ulrich Bernardi Krippenhaus von ANRI . Die Höhe beträgt etwa 54 mm. Die Montageabstände sind auf 0.2 mm eingestellt, so dass auch Drucke aus nicht korrekt kalibrierten Druckern…
Nähfuss-Halterung für BERNINA und SKADIS. Drei Versionen: - normal - grössere Füsse - normal mit extra Halter für den Fuss 3A. → Siehe Bilder *** Sewingmachine foot holder for BERNINA and SKADIS. Three versions: - normal - bigger feets -…
Clean display stand for this amazing little machine
Please respect the Licence the thing comes with! Thanks Thanks to user "Threat_Craft" who test printed the prototype, provided pictures and the dimensions so I was able to adapt the epic ultra to the RG353m as I don't own it myself.…
I needed an easy way to track and find my Toolbox. For this i use an Apple AirTag and i tried to find a “hidden” place for the Tag, because i need the space inside my Toolbox and the the tags should not be easy to find. So i create a…
Storage tray crowbar feet 9mm and 5.5 mm compatible BERNINA Accessory Box. Addition of models for the IKEA panel.
Used PrusaSlicer to customize the RG35XX stand made by jlips. The Anbernic logo is borrowed from the boot logo I'm using for a different look. I also added negative volumes on the bottom for rubber bumpers I had laying around to ensure…
Unleash the future of the undead with this detailed Cybernetic Skull Bust , a striking fusion of machine and bone. Whether you're into sci-fi, robotics, or just love clean mechanical aesthetics, this bust makes an epic desktop companion,…
Prints fine without supports. Turn on ironing to clean up the inside faceplate that actually makes contact with the rg353v. I used a roll of felt tape to line the inside from amazon. This is really rough as this is my first remix but…
This is complete set of models for the Mishkan, or Tabernacle of Moses. It includes dioramas of the complete courtyard (without fabric elements), the courtyard objects, the mishkan, the ark, and the other mishkan objects, as well as some…
Inspired by the idea of 3DWunderwerkstatt I create my Bosch GSR 12v cordless screwdriver holder for Systainer T-Loc Systems. It’s designed to fit on all sites and for left or right handed people. I created a bit higher then other people…
The Anbernic RG405M is a retro handheld emulation game console that runs on Android. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective…
This is my attempt to make a grip to make the win600 a little more comfortable and usable. Its not perfect by any means, and likely would be best used with stick covers, but it is a large improvement over stock. The fit is intentionally a…
The knob on my propane torch snapped when I dropped it. So I made a new knob with the features we all love like press fit and knarled. Have a great day!
3D printable dock designed for the Anbernic RG353V handheld gaming console. This dockholds the console during storage or charging. The dock includes a channel for a type c cable. Prints fine without supports.
An all 3D printed case for the Anbernic RG35XX Plus. No screws are needed for the assembly. if you a short cable or a fiber cloth you might be able to store it ind the case to :) When printed, just put the lid on and put some 1,75mm…
IF YOU NEED THE EPIC ULTRA FOR THE " RG351P or M ( Plastic or Metal) FOLLOW THIS LINK: https://www.thingiverse.com/thing:4702672 !!WARNING!! After placing your RG351MP into this game pad holder, be prepared that you never ever want to…
A simple spacer to add to the Omni's armrests to significantly increase tension.
A cask like you'd see on a St. Bernard
These are some custom replacement buttons I made for the Anbernic RG35XX.
Feel free to use this to develop your own accessories!
🐾 Bernese Mountain Dog The Bernese Mountain Dog is a gentle giant known for its striking tri-colored coat, calm temperament, and deep devotion to its family. Originating in the Swiss Alps, this breed was historically used as a versatile…
A simple stand for the Anbernic SP
Print in TPU with supports nice and slow with the flat side down! I used a 10% support threshold. If you want to buy this from me or want to support me, follow this link here: https://dildesigns3d.etsy.com
Bobbin holder for bobbin thread jumbo bobbins from BERNINA. An bulge was constructed each side so that the coils snap into place and cannot fall out. In version 2 one bulge was removed, otherwise too much pressure would be exerted on the…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP Low-poly Bernese Mountain Dog in a calm standing pose with…
This model was remixed from ScottMuc's Anbernic RG405M Shoulder Buttons , scaled and edited to fit the RG505, although its recommended to print with SLA printers, I printed mine with FDM (Kingroon KP3S) and there were zero issues with…
I designed this stand for my Anbernic RG405V but I do believe this would work universally for any Gameboy styled handheld retro gaming device or cell phone. It also includes a cut out for a power cord to come up through the bottom. It was…
I created a set of dogs that are easy to print and scalable to any size! I use an A.I. App on MakerWorld then I bring the models into Tinkercad to fix them.
Zweiteiliger Druck! Gemacht für verschiedene Fadenspulen Grössen und speziell für BERNINA Nähmaschinenspulen . Die zwei Teile können einfach mit z. B. Sekundenkleber zusammen geklebt werden. Die beiden oberen Teile sind unterschiedlich…
Display stand for the retro gaming devices Anbernic RG353V and RG353VS.
Fridge magnet of a Bernese Mountain Dog. Designed for 3x 4x1mm magnets. gcode files for 1 piece and also for 4 pieces at once.
Grip, front cover and stand for the Anbernic RG351V retro gaming handheld. The grip makes longer gaming session more comfortable without blocking buttons or connectors on the bottom of the device. The front cover protects the screen, top…
This was created in Fusion 360 from a 2d piece of art I found on the internet. Slice it at 0.2mm and each color change will fall exactly on a new layer. Throw in an M600 command anywhere you want to change colors and print away. These…
Come join this collaborative project to create the Tabernacle of Moses (Mishkan) as described in Exodus, with its courtyard and objects! Here is the link for the group I just created, and I am hoping others will want to join in to make…
Here my Spirit Level Holder for your Systainer T-Loc Box Tower. Set Bottom Part to the bottom Box and the Top Part to the upper Box and slide in your Spirit Level ;) Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No…
I built this to protect my RG28XX screen from pocket sand (gotta be protected in case of an attack) or the occasional drop in and out of the pocket. Its friction fit. Its designed for the foam that came in the box to protect the screen.…
Notes d'impression Nécessite des supports.
My wife has a Bernina 800 sewing machine with a lot of different "Presser feet", so I designed this 3d printable hanger so she has them organized and easily accessible. This hanger is for the "9mm" presser feet, which works on many…
Mount for the RG351P on the Ikea Skadis
Trays and lid for holding Bernina Artista 170 sewing machine bobbins. While I'm sure the bobbins are used in other Bernina models I don't know which. Each tray holds 25 (5 x 5) bobbins. Trays stack together. The lid snaps into notches in…
I created a set of dogs that are easy to print and scalable to any size! I use an A.I. App on MakerWorld then I bring the models into Tinkercad to fix them.
Bobbins for the Bernina 700 and 800 series are a little odd. They aren't symmetrical -- one side is bigger than another. This is an organizer to pack these fairly densely while keeping them accessible with thread color visible. I designed…
DISCLAIMER: Modding your electronic devices can be dangerous, and you may end up damaging them. Use at your own risk. The author of this publication is not responsible for any damage caused as a result of using these models. Protection…
This grip is for the Anbernic RG35XX H, making it more comfortable to hold while you game. Its ergonomic shape helps reduce hand fatigue during long sessions and gives you a better grip, so it’s easier to enjoy your games without your…
I liked the feel of @dildesigns ergonomic grip and the sleekness of @m00nd0gg slide on design , so I hacked them together to create this slide on ergonomic case for the Anbernic RG35XXH. I printed in PETG, 15% gyroid infill, and supports…
I needed some grooved tweezers to better hold wires or pins when soldering, because even the serrations in some tweezers would allow the wire to rotate. I found the 5-064 style of tweezers from Bernstein, but since I have a 5-434 I…
A freestanding/desktop Bernina presser foot cabinet that holds up to 10 small feet & compartments for 2 large feet.. Print with the front side up. Use the attached f3d file if you want to make adjustments. Compatible with the OEM Bernina…
Made a couple modifications to builman's BERNINA bobbin spool tray to enable clean printing with no supports. Print instructions Category: Replacement Parts Summary Made a couple modifications to builman's BERNINA bobbin spool tray to…
This is a snap case for the Anbernic RG353v. It's meant to be felt lined to protect the device and to create a tight fit. I used 1.2mm x 31.8mm wire brads for the hinges.
Ersatz Zahnrad für das originale Doppel-Zahnrad mit 120 - 127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G. Da man das originale Doppelzahnrad 120-127 nur für zöllige Gewinde benötigt, genügt das 120…
I would suggest to print the top and bottom part of the bobbin separately (split parts provided) and glue them afterwards (no support required). Or print the whole bobbin in one piece (support material required). I printed in PLA, 0.2 mm…
!! Print at 3x scale, else tolerance will be incorrect !! The following datasets were used: height model: swissALTI3D landscape model (Buildings): swissBUILDINGS3D 2.0 Steps: Combining the height model and the landscape model into a…
This is a grip for the Anbernic RG35xx. It's got long handles for people with larger hands. Edit: Adds a v2 with a stronger grip on the console and a rounded bottom so it doesn't cut into your finger as you play (sorry about that with V1)…
Bernina Hand Wheel Replacement. Modern Bernina clip on hand wheel.
A simple reminder tally of the currently installed needle on a Bernina quilting machine. Fusion 360 file included to customize your favorite needle types. Printing Filament: Prusament Lipstick Red Layer Height: 0.20 Perimeters: 2 Infill:…
I made this case from scratch in OnShape for an Anbernic RG353M Print with bed supports. 0.2mm I used 3 walls, but 2 could probably work. Use 1.75mm filament for hinge joint Use Felt sticker inside to protect screen. You could also line…
The case fits 1x RG351MP and 2x micro SD cards Non-printable parts: 12x ⌀4mmx4mm magnets 2x button head wood screw 3mm x 20mm to 40mm in length a little bit of glue No supports are needed. Control dimensions of handheld before printing…
THIS IS A WORK IN PROGRESS Some custom grips for the Anbernic RG505. I made the grips massive for my big hands. They work great for making the analogs way more comfortable to use, but the shoulder buttons are simply too far away from the…
Finally done, a nice comfortable grip for your original RG350. The base for the design was a very ruff 3D scan of a Xbox 360 controller I found online. You need some sponge rubber or thin felt for the sides, as this Gamepad secures your…
Ich habe das Modell von Whity angepasst, damit es für den Anbernic RG351M passt (aufgrund der ähnlichen Abmessungen könnte das Case auch für den RG351P passen). Damit auch anderes Zubehör wie Kabel oder SD-Karten, Adapter, usw. Platz…
A nice comfortable grip for your original RG350P and RG350M The base for the design was a very ruff 3D scan of a Xbox 360 controller I found online. You need some sponge rubber or thin felt for the sides, as this Game pad secures your…
I know you always wanted to display your Anbernic RG35XX! Now you have a chance to have very nice stand for your favourite handheld. BUT REMEBER ABOUT THE DUST ABRASION! What I used? Here: Printer: Creality Ender 3 V2 Neo. Nozzle: 0,4 mm,…
Handle for the Anbernic RG35XX Plus
Bernese Mountain Dog Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
Grip, front cover and stand for the Anbernic RG300 retro gaming handheld. The grip makes longer gaming session more comfortable without blocking buttons, connectors at the bottom of the device or the volume wheel on the side. The front…
Designed this holder for cap embroidery. The shield can be clamped between the Cap hoop and Cap clamp. Both get connected with screw and wing nut.
This is a snap case for the Anbernic RG35xx and RG35xx Plus. It's mean to be used with flet lining to protect the device completely. I used 1.2mm x 31.8mm Wire Brads for the hinges. Depending on your printer tolerances, they should be…
