P
PrintablesMeshtasticCmoi
Dipole Antenna Support Case
3d printed case to DIY build your own dipole antenna. It will fit up to RG316 coax size pigtails.
- Pobrania
- 819
- Polubienia
- 57
- Ocena
- 5
Wyniki wyszukiwania: dipol
Liczymy pasujące modele…
P
Printables3dprintguy
QRP dipole antenna for ham radio, or short wave listening
All components to print a center insulator, end insulators, and line tensioners to build a QRP dipole antenna for ham radio. I designed this for use with 6-32 screws, 18 gauge wire, SO-239 connector and 550 parachute cord. The antenna…
- Pobrania
- 696
- Polubienia
- 128
- Ocena
- 4,83
P
PrintablesHamRadioDude
Ham Radio - Dipole and End Fed EFHW Winder with M5 Post Threads!
This winder is a little more Versatile than other iterations, subjectively. It uses M5x0.8 Threads to allow each dipole post more secure into the winder. SO239, space for a T140-43 or smaller Toroid for a Choke. Pictured is the dipole as…
- Pobrania
- 638
- Polubienia
- 113
- Ocena
- 5
P
Printables3DSistem
Dipole antenna center
Designed this for my /P operation. Top hole allowes it to hang in inverted V setup BNC Connector compatible Donations for new trx are more than welcome via paypal
- Pobrania
- 601
- Polubienia
- 93
- Ocena
- 4,67
P
PrintablesDL2MAN
Linked Dipole for 80/60/40/30/20m - perfectly macthing (tr)uSDX
Look at https://dl2man.de/linked-dipole/ for detailed instructions and look at the Video for seeing me setting it up, doing all the measurements and some QSOs. All files Printed from PETG in 0,15mm Layer hight, no supports needed. Make a…
- Pobrania
- 403
- Polubienia
- 60
- Ocena
- 5
P
PrintablesC4 Designs
Amateur Radio Dipole Antenna, Guy Rope Winder
Designed with the Amateur Radio community in mind. Designed to wind up Antenna Dipole legs to keep them tidy and kink free. Other great uses are for 550 or paracord, kite string, fishing line, etc. it requires any type of elastic cord to…
- Pobrania
- 395
- Polubienia
- 82
- Ocena
- 5
P
Printablesdgardner
Amateur Radio Mini Dipole Antenna
Very small dipole antenna. Great for backpacking, POTA, SOTA, etc. Three different base connectors for SMA, BNC and SO239 connectors. Connect 2 lengths of wire to the base and clip on the connector. Search the Internet for “Dipole…
- Pobrania
- 344
- Polubienia
- 83
- Ocena
- 5
P
Printablesvaxxi
Choke/balun case for center fed dipole antenna
I really liked the Dipole / Inverted V Balun Antenna Centerpiece from kaliway , but it was a bit of an overkill for a FT140-43, so here's a redesign. Features: smaller, thinner and more compact (should be less than 5-6 hours to print)…
- Pobrania
- 334
- Polubienia
- 47
- Ocena
- 4,67
P
PrintablesJammerX19
Link Dipole
I wanted to build a link dipole for Parks On The Air operations that would be lightweight and easy to put up. I designed these pieces around 22 gauge stranded wire and a bulkhead mount SO-239 connector. Use whatever connector you want on…
- Pobrania
- 321
- Polubienia
- 50
- Ocena
- 5
P
PrintablesPedja
Dipole Antenna Center Insulator for SO239
This is center piece for making dipole antenna. Uses SO259 connector for antenna attachment. Provides holes for fixing antenna wire and contact screws. I cut it from plastic on CNC milling machine. It may be 3d printed too but pay…
- Pobrania
- 316
- Polubienia
- 25
- Ocena
- 5
P
PrintablesDC6GF
Linked Wire Antenna (e.g. Dipole or EFHW) Links
Links with labels for 80m, 60m, 40m, 30m, 20m, 17m, 15m, 12m, 10m and without label to build a linked dipole antenna as described in multiple places (e.g. here or here ). With the wire I used (simple 1.5mm² wire from a local hardware…
- Pobrania
- 310
- Polubienia
- 47
- Ocena
- 5
P
PrintablesRyan-N2YQT
Dipole Antenna Center Insulator
This antenna dipole center insulator is an amalgamation of several different designs I have found. It is intended for temporary QRP work. Your results may vary if used in a permanent application. I use PETG at 0.03mm for production and…
- Pobrania
- 304
- Polubienia
- 30
- Ocena
- 5
P
PrintablesThe Typical Ham
Ham Radio Dude - Dipole/EFHW Winder - 4Hole SO-239
Wire Winder made by the "Ham Radio Dude" I had 4 hole SO239's on hand, and wanted to use em. Perfect for a Dipole or EFHW Fits an FT140-43 Toroid. Any and all use must credit the original author, “Ham Radio Dude”
- Pobrania
- 300
- Polubienia
- 44
- Ocena
- 4
P
PrintablesJan_OM2JU
Shortwave Linked Dipole Insulators + Center
The size and number of insulators (with labels) can be easily modified in OpenScad model which is included. All files in ZIP archive: OM2JU_Linked_dipole_Insulators.zip Quick building instructions of complete Linked dipole are in…
- Pobrania
- 295
- Polubienia
- 34
- Ocena
- 5
P
PrintablesValentino Hesse
Antenna V-Dipole 137 MHz
The idea is that by arranging a dipole into a horizontal ‘V’ shape, the radiation pattern will be directed skywards in a figure 0 (zero) pattern. This will be optimal for satellites travelling in front, above and behind the antenna. Since…
- Pobrania
- 293
- Polubienia
- 31
- Ocena
- 0
P
Printablespdxlocs
Dipole Antenna Window Mount
This mount uses threaded 1/4in aluminum rods as antenna elements. The holder is stuck to the window frame with 3m command strips. EDIT 12/6/21: Added an UNTESTED Dual-Band version by request. Fusion 360 files included! Print Settings…
- Pobrania
- 273
- Polubienia
- 57
- Ocena
- 5
P
Printablesfreedom2000
Lora 868 MHz dipole antenna
This is a very efficent dipole antenna for Lora network. It is tuned for 868MHz frequency more information here : https://github.com/CongducPham/tutorials/blob/master/Low-cost-LoRa-IoT-outdoor-step-by-step.pdf Print Settings Notes: print…
- Pobrania
- 237
- Polubienia
- 48
- Ocena
- 5
P
PrintablesRoyal Farris
Dipole antenna insulator center/end
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/d459KBbGIG8 Category: 3D Printing
- Pobrania
- 219
- Polubienia
- 23
- Ocena
- 5
P
PrintablesLinas LY2H
Universal Doublet (dipole) Centre
Universal Doublet (dipole) Centre is designed to facilitate installation of a doublet antenna with the 450 Ohm windows-line feeder onto a 10m Spiderbeam mast. It allows to quickly deploy and rewind the antenna in the field. The…
- Pobrania
- 218
- Polubienia
- 16
- Ocena
- 0
P
PrintablesNW6U
DodecaWhip - V-Dipole HF portable antenna system
WORK IN PROGRESS - near final revisions. *Please leave feedback on this tutorial and the prints. It will only help to improve the overall model. I am a big fan of open-source and improving upon established products and standards. I am…
- Pobrania
- 208
- Polubienia
- 29
- Ocena
- 5
P
PrintablesKB9RLW
Dipole center with BNC and 1:1 balun
A simple dipole center structure with a hole for a BNC panel mount connector and space for a T80 torroid 1:1 balun. For field use. Category: Electronics
- Pobrania
- 186
- Polubienia
- 49
- Ocena
- 0
P
PrintablesValentino Hesse
V-Dipole antena holder
A holder for a generic antenna that you can buy cheap on ebay or anywhere else. This auxiliary bracket is for fixing the antenna as a V-Dipole for receiving broadcasts from satellites noa at a frequency of 137 MHz. The antenna should be…
- Pobrania
- 183
- Polubienia
- 24
- Ocena
- 5
P
PrintablesRyan-N2YQT
Linked Dipole Insulators
Linked dipole links. Use your preferred method to connect the wires (I use alligator clips). These can also be used as end insulators by passing the rope through the hole in the center. I printed in PETG at .3 Draft settings, and they…
- Pobrania
- 173
- Polubienia
- 21
- Ocena
- 0
P
PrintablesJosh Myer
Links for Linked Dipole / Inverted Vee
This is a linked dipole link which can be used with any 1.8mm OD wire. This includes the spool of DX Wire that I have here, as well as the 20 gauge silicone wire that BNTechGo sells on Amazon. I also used 2mm banana plugs to connect the…
- Pobrania
- 172
- Polubienia
- 38
- Ocena
- 5
P
PrintablesJammerX19
Dipole center insulator and hanger
My off center fed dipole is 264 feet long and the center piece broke. I designed this to be more robust to allow the connections as well as rope and hardware for hanging in the trees.
- Pobrania
- 154
- Polubienia
- 20
- Ocena
- 0
P
PrintablesMiaoucat
Connection Box for Antenna Dipole EFHW EFRW HAM
2 SIZE AVAILABLE, for QRP or 100W~ simple box for matching unit SOTA POTA portable operation. could be used to make a Dipole, EFHW, EFRW antenna. radio plug into the BNC, the Antenna into the Banana plug. item required: -4mm banana plug…
- Pobrania
- 152
- Polubienia
- 25
- Ocena
- 0
P
PrintablesKB9RLW
Cage antenna spacer for ham radio cage dipole or end fed.
This is a simple spacer for 6 wire cage antennas. The 3mm holes should be fine for 18 ga insulated wire. After threading the wires through and drawing them taught, position the spacers and put a drop of super glue where each wire passes…
- Pobrania
- 147
- Polubienia
- 9
- Ocena
- 5
P
PrintablesRyan
Amateur Radio Dipole Feedpoint and Insulators
Feed point and end insulators for a 20m DIY Dipole Kit. It is designed for RG-58 but RG-8x should work too, coax to be ziptied to it to secure it hanging vertically. Wires just tie to the holes on each end. Printed in PETG, although PLA…
- Pobrania
- 145
- Polubienia
- 27
- Ocena
- 5
P
Printablespd3ron
Band Dipole Insulators 6 - 40 mtr
Insulators used in-between different band segments in building a multiband linked dipole. credit to KosherPorkRinds
- Pobrania
- 133
- Polubienia
- 12
- Ocena
- 0
P
Printablessmurphboy
Yagi Dipole Holder
Inspired by the original, this print allows a dipole to be fitted to a 15mm or 20mm boom. Uses M3 hardware to secure 10mm Al tube (1mm wall thickness), and M4 hardware to secure to 15mm or 20mm boom. I print with supports for the base…
- Pobrania
- 131
- Polubienia
- 13
- Ocena
- 0
P
PrintablesPlankto
Wire Insulator - Dipole / Wire Antenna
Wire insulator for wire antennas, dipole etc. Category: Hobby
- Pobrania
- 115
- Polubienia
- 17
- Ocena
- 5
P
PrintablesSatellietje
Dipole antenna
You are doing me a big favor by clicking the Like button :-) Good antennas are expensive. This it will cost you around 15 euros and works super. I use it at 86 - 87 MHz as a transmission antenna with 50 Watt Power. It has an excellent SWR…
- Pobrania
- 114
- Polubienia
- 46
- Ocena
- 0
P
Printablesgiammy_m
V Dipole antenna mount
This is a simple mount to create a 120° V dipole antenna, using the popular M10 telescopic rods. Here is a general parts list, your mileage may vary since I brought some components at a local hardware store: Telescopic rods:…
- Pobrania
- 112
- Polubienia
- 11
- Ocena
- 5
P
PrintablesLunchbox
Slinky Dipole Antenna
My custom designed slinky antenna. People have been making slinky dipoles for longer than i have been around, but i decided to design some parts to make assembly easier. I included a picture of the exact slinky i used. I bought mine from…
- Pobrania
- 110
- Polubienia
- 30
- Ocena
- 5
P
PrintablesLuboš Novák
VHF/UHF dualband Dipole v2
Přináším další verzi VHF UHF dipól antény vyrobenou Z prvků staré TV antény. Průměr prvků je 6 mm. Délka pro 2 m (170 MHz) je 2x 39,5 cm, pro pásmo 70 cm (445MHz) je 1x 29 cm, samozřejmě lze naladit změnou délky pro požadované frekvence.…
- Pobrania
- 105
- Polubienia
- 19
- Ocena
- 0
P
PrintablesJurotom
Ladder line separator 25mm for dipole antenna
I liked the separator by DO7HAR but i felt like it wasn't wide enough. So i created from scratch very similar separator which keeps cables 25 mm apart. It is tight enough that it won't fall or move around the cable. I used it with 2 mm…
- Pobrania
- 101
- Polubienia
- 10
- Ocena
- 0
P
Printables8815431
Dipole antenna core
Layer height: 0,4mm Supports: No Print with cable holes for PL connector on bottom.
- Pobrania
- 101
- Polubienia
- 32
- Ocena
- 0
P
PrintablesPlanlos
Buddipole guying toggle plug
This plug is used to secure the toggles of the new Buddipole injection-molded guying ring.
- Pobrania
- 93
- Polubienia
- 11
- Ocena
- 5
P
Printablesagmcmll
Dipole Antenna bracket
A bracket to create a dipole antenna using 1/2" (5/8" (16mm) actual OD) copper pipe, would work with EMT also. Designed to be bolted together will work with M4 bolts, or #10-24, or #10-32 bolts. The hole in the main body was sized for a…
- Pobrania
- 92
- Polubienia
- 21
- Ocena
- 0
P
PrintablesHamRadioDude
Dipole wire insulator for Mini / Portable Ham Radio Wire Antenna
Simple dipole insulator for ham radio (Small wire antenna). I used 26awg. Enjoy. Tell a friend, or don't. Category: Electronics
- Pobrania
- 91
- Polubienia
- 9
- Ocena
- 0
P
PrintablesLuboš Novák
VHF/UHF dualband Dipole
2mm wire 4x M3 screw Pro výpočet délky drátu použij dipol kalkulačku z internetu. Za pomocí analizeru doladit na požadované frekvence. To calculate the length of the wire, use the dipole calculator from the Internet. Tune to the desired…
- Pobrania
- 87
- Polubienia
- 18
- Ocena
- 0
P
PrintablesMiaoucat
V Dipole Hub for M4 Whip Antenna 118cm telescopic multi band HAM 2M Tripod mount 1.4m
[Universal V dipole Antenna Hub] for m4 whip and BNC coax this is a simple, but extremely practical antenna system that is multiband capable. it enables you to adjust it to practically any frequency within its physical limit. should be…
- Pobrania
- 85
- Polubienia
- 20
- Ocena
- 0
P
Printablesdb3jhf
Centerpiece for dipole antenna with symmetrical feed
This is a centerpiece to build an dipol with symetrical feed line @ 450 Ohms (like CQ 553 flex wire). I recommend to use the new version (NG) with the improved and strengthened relief. It is still designed for the CQ 553 flex wire but may…
- Pobrania
- 84
- Polubienia
- 12
- Ocena
- 0
P
PrintablesC Mitch
HELTEC V3 Dipole
Heltec V3 specific dipole mount. Not finished but works amazing !
- Pobrania
- 83
- Polubienia
- 34
- Ocena
- 5
P
Printablesperja12
Dipole antenna with SMA connector
Parts needed to make a dipole antenna inspired by https://www.printables.com/model/235528-dipole-antenna . I have used 10 mm diameter copper pipe and cut to length using SWR meter (NanoVNA) according to the wanted frequency. From the wall…
- Pobrania
- 82
- Polubienia
- 24
- Ocena
- 0
P
PrintablesMarcR
Dipole: Current Balun, BNC FT114-31
This is a mounting plate for a dipole antenna. this design is sized for an FT114 toroid. it uses M4 screws and a BNC chassis mount connector. zip ties are used to hold the toroid in place. the BNC cutout is sized for a BNC bulkhead…
- Pobrania
- 82
- Polubienia
- 5
- Ocena
- 5
P
PrintablesAlzibiff
Dipole mount for weather satellite reception
The purpose of these files are to provide a means of mounting two aluminium rods to a length of 32mm waste pipe. Why? To form a dipole antenna for the reception of NOAA satellite data on the 137MHz band using an SDR receiver. Basic…
- Pobrania
- 81
- Polubienia
- 9
- Ocena
- 0
P
PrintablesTex_Tbone
Dipole Center Insulator
This is a 3D-printed center insulator for building a dipole antenna. Two versions are included: one for an SO-239 connector and one for a BNC connector. The enclosure has room for a 1:1 current balun. I used an FT140-43 toroid for mine…
- Pobrania
- 77
- Polubienia
- 5
- Ocena
- 4
P
Printables3dprintguy
Accessory wire keeper and label for the QRP dipole antenna
These holder/labels work as accessories to the QRP dipole antenna center and end insulators. When cutting a wire to make the two elements of the dipole antenna I like to cut about 12” longer than expected to allow for tuning. After lacing…
- Pobrania
- 77
- Polubienia
- 11
- Ocena
- 0
P
PrintablesJeff Crossett
Ham Radio V-Dipole / Tripod Antenna System
Possible Antenna Conifgurations: 1. Tripod based vertical antenna (perfect start for a POTA Performer) 2. Tripod based dipole 6-20M 3. Raised dipole 6-20M (using a standard painters pole) The raised dipole uses a standard painters pole…
- Pobrania
- 76
- Polubienia
- 15
- Ocena
- 0
P
PrintablesTom-K2TAV
Buddipole mast adapter 1/4-20
work in progress. mount to take the Buddipole mast with the ½" pipe thread (versatee mount) to a standard tripod mount (¼-20) to mount the arrow antenna. the adapter will need a ¼-20 bolt added.
- Pobrania
- 71
- Polubienia
- 11
- Ocena
- 0
P
PrintablesPlankto
Printed Dipole Centre Insulator
3d Printed Dipole insulator Light-weight and ideal for temporary portable operation with some wire and zip ties. Recently tested and used with a 80m doublet used portable during a 24 hour contest. Print Settings Printer Brand: RepRap…
- Pobrania
- 71
- Polubienia
- 6
- Ocena
- 0
P
Printablesf1nsr
Yagi antenna clamps and dipole for 23cm or 869 or 915 MHZ
Elément diameter : 4 mm for 15 mm boom. use aluminum for the elements and brass for the dipole. Fix with nut and M4 screw. PETG. 100%. Perimeter x 6 . This design remains experimental errors are possible. Particular attention will be…
- Pobrania
- 69
- Polubienia
- 12
- Ocena
- 0
P
Printablescoliss86
v-dipole antenna holder with round base
I change the base to fit a PVC tube of 32mm in diameter. I have included the fusion file if you need to customize it. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.32 Infill: 25%…
- Pobrania
- 68
- Polubienia
- 7
- Ocena
- 0
P
Printableswavexx
Sausage Dipole Antenna mount
Centerpiece for a dipole antenna, 5mm coax cable (RG-58) and various rod sizes (4,5,6mm). There is plenty of space inside for the wiring. The generous size also makes it pretty sturdy and has no problems to support long/heavy poles (2-3…
- Pobrania
- 67
- Polubienia
- 16
- Ocena
- 5
P
Printablesecspot
Choke/Balun cap remix for center fed dipole antenna
This is a remix of the cap from the original model to give a little more surface to handle the cap. The original model uses a reverse thread, and this one does as well.
- Pobrania
- 62
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJoshua Kaiser
Wire Antenna Coupler Dipole Antenna Center
Wire antenna coupler for making resonant dipoles or possibly delta antennas. This coupler is made compact and not designed for use with a balun or choke unless placed in line with the SO239. Designed for use with heat-threaded inserts.…
- Pobrania
- 60
- Polubienia
- 7
- Ocena
- 0
P
Printablesf1nsr
Isolation mount for a 40 meter 1-element HY-GAIN dipole antenna
Hairpin Line Isolation Mount for Hy-Gain Discoverer 7-1 (40m Dipole Antenna) Replacement hairpin line isolation mount specially designed for the Hy-Gain Discoverer 7-1 (40-Meter 1-Element Dipole Antenna — Order No. 371S). Original…
- Pobrania
- 59
- Polubienia
- 4
- Ocena
- 0
P
Printablesww0cj
HamRadioDude's Dipole Wire Winder with Band Numbers
I like HamRadioDude's wire winder design, but wanted band numbers on the winder to indicate what it's tuned for. Haven't printed this yet but you may want to add minor supports at the bottom for the numbers.
- Pobrania
- 57
- Polubienia
- 5
- Ocena
- 0
P
Printablesmlink
Foldable V-Dipole antenna with tripod mount
Foldable 120° V-Dipole for NOAA weather satellite reception. Can be mounted on a tripod for a portable setup. The halves are connected by two M3x20 screws. For the dipole I used two ~54cm long 4mm brass rods. The dipole is fixed to the…
- Pobrania
- 56
- Polubienia
- 5
- Ocena
- 0
P
Printablesf1nsr
Linked Dipole Insulators for Wago 221-412
Overview Lightweight and durable dipole link insulator designed specifically for Wago 221-412 connectors. Ideal for portable amateur radio setups (SOTA, POTA, field days) to quickly connect or disconnect wire segments and change bands on…
- Pobrania
- 54
- Polubienia
- 14
- Ocena
- 5
P
PrintablesHoonse
Linked Dipole Centerpiece
this is a small centerpiece for a portable dipole or linked dipole. it has space for a balun core and the cables can be directly winded on the centerpiece. there are also some spareholes to hang some other stuff on it. pictures will come…
- Pobrania
- 53
- Polubienia
- 8
- Ocena
- 0
P
PrintablesOldManMike
V-Dipole Mount
Antenna mount for V-Dipole used for 137Mhz NOAA APT reception. Antenna original design by Adam 9A4QV. Use 3/8 rod or copper tube for antenna elements. Print with PETG material. 15-20% cubic infill. Units are mm.
- Pobrania
- 52
- Polubienia
- 6
- Ocena
- 0
P
Printablesdean bryant
ham radio dipole insulators
printed with PETG-GF using stock settings on a centurion carbon printer the are just under a inch in diameter at .978" and just over 1-1/2" long at 1.576" the holes are 1/4" .250" you can scale it larger or smaller. happy hamming 73 from…
- Pobrania
- 51
- Polubienia
- 12
- Ocena
- 0
P
PrintablesKB9RLW
Dipole center for window line antenna.
This is a center structure for building dipole antennas using window line or ladder line as the actual antenna radiator. I made it to use a BNC panel mount connector for a coax feedline. It could be modified for an SO-239 using most…
- Pobrania
- 49
- Polubienia
- 9
- Ocena
- 0
P
PrintablesJurotom
Doublet dipole antenna center
Center part of the doublet antenna which i made from 2 mm wide old military cable. It has holes to secure the cables with zip ties. I used it together with my line separator…
- Pobrania
- 45
- Polubienia
- 6
- Ocena
- 0
P
Printablesk8md
UHF Dipole
This is a very simple dipole for UHF frequencies. I designed it to hold 70cm elements, although I've also built it as a 1.25m antenna. I haven't tried elements for 2m band yet, I believe they would be too long. I have another design that…
- Pobrania
- 45
- Polubienia
- 15
- Ocena
- 0
P
Printablesjostak
Dipole T joint
The oryginal antenna of Frsky R9m was too bad to use it, so I used the coaxial wire of this antenna, replaced the active and passive element and used this T joint to make a new antenna - well adjusted for 868MHz. Category: DIY
- Pobrania
- 44
- Polubienia
- 5
- Ocena
- 0
P
PrintablesL3M4R
ExpressLRS long 868Mhz / 915MHz dipole antenna cover and mounts
868Mhz / 915MHz Antenna Dipole cover and mounts To get different angle mount and have antenna 10-15mm below bottom plate use lighter to gently warm-up printed handler . It will be much stronger then print of angled mount due to filament…
- Pobrania
- 44
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKarl'zGrafix
Dipole center V2
Dipole center insulator v2. Added clearance for a nut on the backside of the SO239 connector. Reinforced support.
- Pobrania
- 43
- Polubienia
- 4
- Ocena
- 0
P
PrintablesHamRadioDude
Ham Radio - Dipole and End Fed EFHW Winder with M5 Post Threads!
Please share this with other printing groups, forums, etc. This winder is a little more Versatile than other iterations. It uses M5x0.8 Threads to allow each dipole post more secure into the winder. SO239, space for a T140-43 or smaller…
- Pobrania
- 43
- Polubienia
- 9
- Ocena
- 0
P
Printablesredthemesetup
Ultralight Dipole antenna holder for Whoops
This is an ultralight ultrasecure dipole antenna mount for canopies that just use the front holes on the stack. Works on the air65 frame for sure, but will work on any whoop that you can squeeze an antenna between the back brace and aio.…
- Pobrania
- 42
- Polubienia
- 5
- Ocena
- 0
P
PrintablesOK1TRL
Horizontal&vertical 6m/2m/70cm multiband dipole base
Features Variable frequency, user NanoVNA for fine tuning, Horizontal or vertical polarization, 3/8" (large tripod screw) for H and V, 1/4" (small tripod screw) for V polarization, dipole-base-your-mount for your convenience - use any…
- Pobrania
- 42
- Polubienia
- 13
- Ocena
- 0
P
PrintablesFX82
ZS6BKW - G5RV connector from Wireman to the dipols
A simple and stable connector between Wireman 450Ohm and the dipoles. Make a corresponding hole in the bar of the Wireman. Connect the dipole wires. Seal them with heat shrink with glue. Screw the halves together. Have fun with your new…
- Pobrania
- 42
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKarl'zGrafix
Dipole end insulator
simple dipole end insulator for ham radio antenna building
- Pobrania
- 41
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAleliz
Sector 5 ELRS Nano Dipole antenna holder
ELRS Dipole antenna holder. I have a BETAFPV Nano Rx, but it should fit any dipole antenna. The distance is 18mm in between. The fit is as snug as it gets , it requires some patience to insert the antenna ends. Print Settings Printer:…
- Pobrania
- 40
- Polubienia
- 3
- Ocena
- 0
P
Printablespklosko
NOAA_V-dipoleAntenna-Base
Simple base for 137MHz NOAA satelites V-dipole antenna https://www.rtl-sdr.com/simple-noaameteor-weather-satellite-antenna-137-mhz-v-dipole/ Tripod holder : https://www.printables.com/cs/model/541352-v-dipole-tripod-holder
- Pobrania
- 40
- Polubienia
- 3
- Ocena
- 0
P
PrintablesCrowdedlight
137 MHz Antenna V-Dipole for Wire
A remix adding hole for wooden rods and wire on top of it. Made as I didn't have aluminium rods and it was easier to solder the coax cable directly to the antennas. Made it easier for me to tune the antenna length to fit the 137 MHz, than…
- Pobrania
- 40
- Polubienia
- 3
- Ocena
- 0
P
Printablescfeldhaus
UHF & VHF Dipole Center Mount for SotaBeams Mast
This is a UHF/VHF dipole center mount that will deploy on a SotaBeams mast.
- Pobrania
- 38
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMountain QRP Club
Antenna dipolo VHF
Progetto di IU2HEE Durante le escursioni, soprattutto quelle più impegnative, se vogliamo portare con noi la radio è necessario che l'antenna sia il più leggera e piccola possibile, inoltre serve che si riesca a montarla e smontarla…
- Pobrania
- 37
- Polubienia
- 11
- Ocena
- 0
P
Printablesdean bryant
ham radio dipole antenna center balun box
center support for dipole, windom wire type antennas for ham radio, drip guard is not necessary, just extra protection from water getting in the coax connector. Thanks 73 KE4ARI
- Pobrania
- 35
- Polubienia
- 13
- Ocena
- 0
P
Printablesmrusk
Stratux DIY Dipole Antenna
A small housing to create a DIY Dipole Antenna for a Stratux (ADS-B or FLARM) out of a DVB-T antenna cable.
- Pobrania
- 35
- Polubienia
- 8
- Ocena
- 0
P
Printablestedk
7m Spiderbeam Dipole Center
This model fits over the top element of a 7m Spiderbeam mast, has zip-tie holes for a toroid and strain relief holes for the antenna wires. The large holes fit a straight BNC connector, with the hole on the other side supporting a third…
- Pobrania
- 33
- Polubienia
- 1
- Ocena
- 0
P
Printablesch3p4ll3
V-Dipole Antenna Bracket
a support to hold the antenna perfectly at 120°, perfect for receiving weather satellites such as NOAA and Meteor. The holes in which the antenna fits have a diameter of 7mm
- Pobrania
- 31
- Polubienia
- 3
- Ocena
- 0
P
Printablesryan_be
Dipole Arial mount
A basic first iteration dipole areal frame designed for high altitude balloons Print instructions Category: Hobby Summary A basic first iteration dipole areal frame designed for high altitude balloons
- Pobrania
- 30
- Polubienia
- 4
- Ocena
- 0
P
PrintablesHamRadioDude
Ham Radio Wire insulator OR Linked Dipole Connector, and More!
UPDATE, I hung 15 pounds with this. Seems legit M5 threaded post and a S hook. Inspired by something called "Cord Lock" at Ace hardware. As you can see, you can use it for strain relief OR for a end insulator on a dipole, efhw, etc.…
- Pobrania
- 29
- Polubienia
- 1
- Ocena
- 0
P
Printablesmcbillsan
EFHW dipole transformer enclosure
This is an enclosure for an end fed half wave dipole antenna transformer. It is sized for a Fair Rite 264351002 ferrite core and includes a post to hold the core securely. For 3-30MHz, the transformer is a 14 turn transformer wound with…
- Pobrania
- 25
- Polubienia
- 5
- Ocena
- 0
P
PrintablesKO4DDG
Fan Dipole Components
This is the component Kit to utilize a DX Commander Signature 9 Mast to make your own Fan Dipole. Check out my Youtube page for the Video explaining how to make one. 30 infil PETG, or better ASA make sure it is not CF or carbon fiber
- Pobrania
- 25
- Polubienia
- 4
- Ocena
- 0
P
PrintablesHuisek
Paint Pole Dipole Center Support
Designed to use an extendable paint pole as a center support for a dipole. Prints in two pieces to maximize strength and simplify supports. Requires two #10-24x1 machine screws and nuts plus one SO-239 connector. The idea is the two…
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRaatzie
RTL SDR Dipole Centre
My Dipole centre broke so I made this a a replacement.
- Pobrania
- 23
- Polubienia
- 5
- Ocena
- 0
P
Printablesp2xxx
V-Dipole Antenna 120
V-Dipole Antenna 120 thread ¼ 20 PETG
- Pobrania
- 22
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJames Young
Wire Dipole Antenna SMA
This is a center hub for a homemade wire dipole, using a SMA plug (TE 1052422-1). Drill the 4 holes to 3mm (M3), solder in the wire, use a M3 bolt to connect a ring lug (RS 0433028 ).
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesIronBeagle
Buddipole To M10
I have a vertical antenna that has a ground spike with a M10 thread on the top. I wanted to rase the antenna off the ground and use it as a POTA Performer. Since I have a Buddipole tripod I can use for the antenna support I modified the…
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPastelIndustries
Simple magnetic half wave dipole FM antenna
This is a simple antenna that you can make out of scrap lying around. All You need is: -4x M8 nut -2x M8 threaded rods (35 cm) -Magnet (I got mine from a broken speaker - it is 6 cm in diameter) -Coax cable
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesVladimír Waas
Antene holder - for vertical polarization opened dipol (cca 200-1000MHz)
dipol from 8mm aluminium pipes in centre is place for balun
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJamesD
Dipole and Vertical Quarterwave Antenna
These mounts allow you to connect a 5.6m whip (or pair for a dipole) to create a portable HF antenna. The toroid (size 140) is held in place with zip ties that are fed through the body of the part. You will see that the bill of materials…
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 0
P
PrintablesCaylorman
Ladder Line Dipole Center w/ SO-239
Remix of KB9RLW's ladder line dipole center to use an SO-239 connector.
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
Printablesch3p4ll3
V dipole antenna mount
3D Printed Antenna Holder for V-Dipole (137MHz Weather Satellites) Overview This project is a simple and practical antenna holder designed to mount a V-Dipole antenna for receiving weather satellite signals at 137 MHz. Using a 20mm PVC…
- Pobrania
- 16
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKarl'zGrafix
Dipole Center
Dipole antenna part. Will be designing end insulators next.
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDG1JAN
YAD - Yet Another Dipole
Yet another Dipole Center Insulator, designed to hold a Common mode choke and uses Wago 221 connectors for the antenna wire connection. Added to additional variants. Am more compact one also with SO239 and a Winder-Style design with BNC.…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0