Liczymy pasujące modele…
I purchased several Lifetime Brand tables with folding legs from a local big box store. They're great except the clips that hold the legs in storage position break easily. Replacement clips for Model LPPRMB 5008 with the product ID…
Extended the arms on the Lifetime Tool Hook from @sentinel23, to hold larger items. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: AMZ ABS Notes: Like the original it…
This is an adaptation of my Milwaukee M18 Quik-Lok holder that I sized up to fit the larger shaft diameter of most of my garden tools such as shovels, rakes and other yard tools. It will fit any tool with a handle diameter that is close…
This dock lets you place your iPhone underneath your television. It allows you to make FaceTime calls via the Apple TV using tvOS 17. Fits the original Apple MagSafe charger. The two pieces should just snap fit together. Example settings:…
This 3D model is a specially designed hook attachment for a Lifetime® Tool Shed. It is sturdy and extremely durable and made to hold many tools safely. The hook can be easily attached to the shed wall slots, helping to keep tools…
A replacement seat clip for the Lifetime Kuna 100 Sit-On-Top Kayak (Model #91054) A more flexible material than PLA is recommended. This part can be printed with PLA (as seen in the provided photos). It will fit and work, but it is a bit…
I made a simple phone holder so I can watch shows while at gym without having to look down all the time. This holder fits the screen of TechnoGym treadmills (typically at LifeTime Fitness) and holds my iPhone 16 Pro in Apple leather case.…
The Sapphire Pro has a problem with belt-misalignment, so I searched for a solution and found this one made by StoneFPV/StoneTime. I had to remixe it a little, because it didn't really fit my pulleys and the tolerances of the holes were…
6in from top of flange to inside of spherical end. Mirror for use on both sides. Print only the flange section to serve as a template for cutting. Installed with silicone and 3/16in long grip blind rivets.…
Easy print in place - no support needed.
This is a set of seat risers for the Lifetime Teton Pro Angler 116 Kayak. They were designed to fit onto the existing seat mounts for the kayak but may require a little sanding to fit. This is a V1 so it may not be perfect but I have…
Hook to let you to hang custom things as wood panel. Simply screw at the back of the panel
A replacement seat clip and hook for Lifetime Kuna 100 Sit-On-Top Kayak (Model #91054) These also fix the problem that some of my clip/hook pairs had where the hook wasn't tight enough to securely keep them together.
This sign is the spiritual successor to every moment you’ve ever laughed at your own joke and thought, “wow, I’m genuinely great company.” A bright yellow rectangle that doesn’t just admit you talk to yourself — it celebrates it. This…
Another Funny Sign - "Sometimes I feel like running away. Then I remember how much I hate running" - dual colour design, printed in ZIRO Black and Overture Matte White PLA. For more funny signs see my (growing) collection of them here -…
This is a replacement leg clip for a Lifetime folding table because they tend to snap off. Print with at least 3-5 walls for strength. I also recommend printing it with something stronger than PLA like PLA+, PETG, or ABS. To replace it,…
Designed to press-fit the original magnet-charging connector. Printed in PLA on Prusa MK3S+ with no supports. You need 4 short screws to Connect both parts together
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) Fits a Lifetime table model 80256. May fit others. Check your table clip measurements against the model in Tinkercad before printing. Designed to be…
Organize your shed with this versatile hook made to fit Lifetime sheds only. Featuring a traditional hook style, this wall-mounted hook is perfect for hanging items such as shed tools, hats. Made from durable plastic, this hook is built…
This is for the lifetime plastic 4'x2' tables sold at Costco. The table height is for about 52 mm or 2 inches. Cable management is attached to the side of the table. It is more of a snug fit on the long side of the table than the short…
Just wanted to make the perfect phone holder. I have others on the way. This holder has been used for over a year, I worked out a few of the issues. Better than ever. This holders Goals: My Iphone (13 pro max with thin case 12mm total…
Was frustrated for a long time as the mount for our Lifetime Kayak wouldn't hold the seat in place. When at the store yesterday looking at a new Kayak, discovered we were missing a clip. While this clip is not as fancy as the original,…
MacOS Ventura and iOS 16 introduce Facetime being able to use the iPhone's camera as a webcam. For this, the iPhone needs to be attached to something. I chose the screen, this is for an LG 38" display. The holder fits over the front and…
English UPDATE: Updated stl of the space-time curvature models. In this update I have slightly modified 1/2 of the equation and made some subtle changes to the surface curvature. I include the 3mf file with the settings for the MK3.5S…
This fits all the lifetime kayaks. print using TPU and 100 % infill along with 2-3 walls
I created this bracket for my Lifetime Teton Pro's rod holders after getting the idea from a fellow kayak owner on a FB group. This is meant to reorient your rods so that they are inline with the kayak rather than sticking out…
Just wanted to make the perfect phone holder with more STYLE!!! The first one was great, but I had people want more. Maybe you want to charge at the same time or watch a movie. Better than ever. Issue it overcomes: If you are anything…
Slips over the ends of the rear seat bar and adds about an inch to the height of the seat in the rear. Should be printed with PETG or another filament that's durable in full sunlight. I used 50% infill and the strength has been fine.
A simple iPhone stand I made for use with Apple TV's new FaceTime feature. I needed it to sit in front of my TV set. The stand snugly fits my iPhone 13 Pro Max with an Otter Box case so it should work fine most other models regardless if…
This is a simple carry case for the Pinetime smartwatch charger.
Apple TV iPhone FaceTime MagSafe charger holder for iPhone 12 to 14 up to Pro MAX models. Fits up to iPhone 14 Pro MAX as shown here. Beginning with iOS 17 Apple will support FaceTime calls with Apple TV like shown here . I directly saw a…
The original model has been working great all summer if you want to replace the original clip. I've been frustrated with the 2 part clip on these kayaks so I modeled another clip that ties directly to the strap. The strap needs to start…
This was a simple edit in Prusa Slicer to Spater's design. Trimmed off the top and bottom a little bit with the cut feature and printed with the arms up in PLA+ with the 0.10mm Detail preset. The edits allow the watch to charge with the…
This is a clip designed for the seat strap of a Lifetime Kayak. It is the matching part for this half of the clip. Category: Sport & Outdoors
Tensegrity model using space-time curvature. I consider it a new model even though I use a part derived from another model of mine: https://www.printables.com/es/model/519031-spacetime-curvature-curvatura-de-lespai-temps . This curved…
This is my first attempt to use FreeCAD thanks to dara0s for providing .FCStd file It is a remix of Pinetime smart watch case by dara0s that hold Dev kit together (https://www.thingiverse.com/thing:4172849). I modified the model so it can…
Designed for the Lifetime Tamarack Angler 100. Model: 90818 but will work with many Lifetime kayaks. Many Lifetime kayaks have two swivels to prevent the rear of the fold-up seat from reclining backward too far. This is a terrible, but…
Modified version of a preexisting mount to work with the Samsung QN90B 65" TV.
Foot for end of horizontal leg tube of Lifetime folding tables. Leg tube is approximately 20mm x 35mm. I printed in flexible PLA, and fits on well when secured with stock screw through table leg. There's a hole in printed piece that…
My church has a bunch of 6 foot Lifetime folding tables to use for events. However, over the years some of the handles have snapped off. This model is a replacement for those handles, and uses the original bolts and nuts to secure them.…
Might need brim for printing. Made it as a challenge for printing without supports. I found myself not using the wrist watch that much so I made a stand for it. Designed for the Pinetime smart watch. Take it as an inspiration and pay…
Wanted something different than what the shed comes with
I have a Mac Mini as my workshop computer and use it with an old Fujitsu screen. Until Continuity Camera was available I had to use my iPhone whenever anyone FaceTimed me and now I can use my Mac AND my iPhone. Fits on an old fat framed…
SOMETIMES MY MIND WANDERS OFF TO A HAPPY PLACE WHERE I AM ALLOWED TO PUNCH PEOPLE IN THE THROAT, AND THERE ARE PUPPIES AND FREE CAKE. Category: Signs & Logos
I have a Lifetime Tamarack 100. I was adjusting my seat on the river and this clip popped off, never to be seen again. I found the model by Hparsonst and gave it a try. It was a little thinner than my original and didn't clip on securely.…
I wanted a vent for my lifetime resin shed. I found quite a few options online, but most were overkill or required a large power source. I designed this plenum to attach to one of the existing gable vents to vent hot air and fumes out of…
Needed a replacement drain plug, this fits the bill. If you want to use the screw which holds in the plug, either drill a small hole or edit the stl to add one. This will need a hammer/mallet to insert, but can be pulled back out by hand
I tried both the original and the remix (linked), but I wanted to keep the back cover closed, while being able to charge the PineTime too. This is the result. Supports are required and could use some improvement. I tried organic supports…
Yazdırma Ayarları; -Creality Ender V3 KE, -Süre: 1h12m -Filament Ağırlığı: 20,30g -Vazo modunda PLA filament ile basılmıştır.
Apple TV iPhone FaceTime holder for iPhone 12 to 14 up to Pro MAX models. Beginning with iOS 17 Apple will support FaceTime calls with Apple TV like shown here . I directly saw a problem here when the iPhone 12-14 is placed on the flat…
This is an umbrella hole cover for the Lifetime 6-foot Folding Picnic Table. It has a flat surface so water will not pool. It can be printed without support and fits snug to the hole. Please check the photos to make sure you have the same…
This clip will replace the clip that holds the 2 halves of the Lifetime folding benches Model # 80309. The original part is ABS, I printed the replacement in ASA because that is what I have. PETG would probably work too but you can let me…
I printed these in TPU but any weather and sun resistant filament will work. Can be used with or without a pull cord Print Settings Printer Brand: VORON Printer: Doomcube Supports: No Walls 5 Infill: 25% Resolution: .25 Filament: TPU,…
Our kiddie-sized Lifetime Wave kayaks have a drain hole drilled in the bow on the upper deck, and we've lost the plugs. The kayak hull filled with water after just a couple hours goofing around on the lake. I'm assuming the open hole on…
Bolt together case for the PineTime Dev kit Needs 4x M2x10mm cap screws with 4x M2 hex nuts I designed this for resin printing, might work with FDM, though I haven't tried. The button is accessible and fits almost flush with the case,…
This printed exactly as shown, no supports, using a 0.6mm nozzle. It is an easy press fit into the hollow leg of a Lifetime folding chair, because for some reason those feet go missing.
Simple rig to hold your pinetime devkit in charging dock. PineTime is a great hackable smartwatch. The Devkits come with loose back cover, so the programming pins are accessible for developers. Unfortunately, this makes impossible to use…
This inlay for Waffletime keeps the cards on the one side and the meeples on the other side, forming a frame to keep the player boards in place. The topping and game tokens are stored in waffle boxes. For the base game I printed: 1x Card…
Tried a number of other designs with no success - glass tables have a different size than the lifetime picnic tables. Print solid with supports enabled for the locking teeth. I used 100% infill with 4 perimeters in PETG.
Simple adapter which snaps into the the free RIDEtime computer mount supplied with some Bontrager Blendr stems that works with K-Edge computer pucks, such as are available for Garmin and Wahoo. You'll need M3 flat head screws - the K-Edge…
This support is to avoid the NESRGB PCB from eTim (Tim Worthington) floating when you install it in a Front Loader NES. No screw needed, just put it on the side of the board. It's designed to avoid the components. Category: Electronics
After watching Kyle Hill's video I decided The Facility might find some STLs for the warning signs mentioned there in case they don't have them yet. Twitter for general nerdy and 3d printing stuff. Twitch for games Print Settings Printer…
a cheap bucket adapter for lifetime kayak with rope dry hull you use a 2.5 q bucket from lowes. i would recommend double sided taeping the adapter to the kayak to make it not fall out. how it works: this is a bucket dear god there is more…
After a recent party, a few of my Lifetime outdoor tables had their retaining clips broken. I was able to print replacements for the larger tables, but no designs existed yet for the Kid's picnic table. So, I took it upon myself to design…
A hanging tool bracket for the 4 foot Lifetime picnic table. I made this for a dust pan with a hole diameter of 8mm.
Complete swap out for the alternating pushers inside the Vulcanator. This mod requires no alteration from the original blaster (dremel, snipping). Just remove the gear and pin inside the pusher mechanism and the alternating engager. A…
just a coin for what ever you want it to be
I printed this in PETG with: 0.16mm High Quality 50% Sparse infill 50% Infill/Wall
Basic easy to print phone stand for conference calls. Allows the phone to charge while on the call.
Replacement case for Timex Ironman C30 Using original mechanism, screws and back cover (which has beeper integrated). More customizable look with compatibility with standard straps. No loss in functionality other than water resistance.…
Give your Bambu printer a BROFIST - A direct replacement for the stock Bambu carbon filter in the X1C/P1S. It can also function as an added filter at the bottom sides. A bit of tape between the lid and box, then doubled over on the…
For setting up a space saving table for an extra workspace.
The PineTime watch charging base isn't the best so I wanted to make it into a stand. I took inspiration from stands for vairous watches here on Printables, but the size kinda complicated things - the stand can'ŧ be that sleek. I went for…
As I don't wear my Pinetime, I decided to turn it in to a worktop display to see my notifications and time while I'm fiddling. Updated: I wasn't happy with the plain push-button on the side so spent a load more hours making a PineTime…
If you have an 24" M1 iMac and want to use a light bar to reduce eye strain, you have to choose between having the lights off center or mostly covering the builtin FaceTime camera. If you also want to ensure privacy by blocking the camera…
the lifetime brand yard cart wheelbarrow has a dump feature that releases too easily and when unexpected I used M5 bolts but M4 might fit better, or similar sized american units, a specific bolt size isn't critical flip the stl to get…
I think it looks pretty good will post a better version of the sign and will be cleaner.
Have fun! Easy and quick multicolor prints. They'd also be fun to paint.
To quickly space and square up these lifetime steel posts I created this jig. Clamp to any board cut one inch shorter than the spacing you want between the boards. I use clamps so you don't get the jig stuck between them once they are…
This 3D-printable fidget ring is a functional, print-in-place accessory designed for discreet stress relief. It features an outer band that rotates seamlessly around an inner ring, providing a smooth spinning motion right off the build…
Replacement proprietary nuts for Lifetime brand 80 gallon compost tumbler. https://www.lifetime.com/lifetime-60058-80-gallon-composter-tumbler Design changes: the OEM ones are sealed on one end, but I made mine open on both ends so that…
Yup Print Settings Rafts: No Supports: No Category: 3D Printing
Simply cleaned-up and shortened the long piece to remove some scan artifacts and make it fit my door. Slice it at .24mm layer height to avoid other surface artifacts from original post. You'll still need to print the other two pieces from…
My Pinetime kept undoing itself so I designed this. I used 95A TPU with a layer height of 0.2mm, it took around 7 mins to print.
Blocks for clamping things onto the edge of the Lifetime folding table range. There are two shapes that match the contours of the table edge shapes as pictured.
Replace a lost or broken spacer ring with this printed one. Printed in PETG. The OEM rings have holes to lock the tumblers position. This one does not have those holes and was swapped with one from the center.
This bracket can be screwed directly into a TrueTime XL or XL-AK GPS and Frequency Time Server, and allows you to 'restomod' it with a Raspberry Pi 5. The Pi must be installed inside a Raspberry Pi 5 Bumper Case to fit, and even though…
⚒ The task was to model a case for a time module from aliexpress. But the result turned out to be much broader: a universal case for any autonomous DIY device was obtained. 🔹Main features: powered by two 18650 batteries; a clamp for an…
Replacement feet for the front and back feet for the folding Lifetime chairs. Seems like these chairs are normally a Costco purchase. There are other feet available here, but they lacked some of the features. Step files also included.…
I acquired a neat looking old piece of 80s vintage Sony hardware from a garage sale; a Sony Digimatic Lifetime TFM-C770W flip clock radio! However, mine was missing the special two-piece time/alarm/tune adjust knob. Using the radio tuning…
I used a 4 1/2" hole saw to cut a larger hole in the base of our Lifetime basketball hoop. The factory hole was about 1" and almost impossible to fill with sand. This modification should work with many brands of portable basketball hoops.
The model should be printed at 1.8 scale for every piece for best results. REQUIRES ADDITIONAL PARTS: 12 4mm diameter 250mm length steel (or other stiff material) rods. rods. Colored 1/8 inch push pins to use as event markers. ASSEMBLY…
The Nightstand Station by Collinsb was almost a perfect fit for my needs except I don't have an apple watch, I have a Pinetime watch. Remixed his watch part to fit my needs. I created a groove for the cable, but will probably have to add…
My Pinetime kept undoing itself so I designed this. I used 95A TPU with a layer height of 0.2mm, it took around 7 mins to print.
Have fun! Easy and quick multicolor prints. They'd also be fun to paint.
I printed these in TPU but any weather and sun resistant filament will work. Can be used with or without a pull cord Print Settings Printer Brand: VORON Printer: Doomcube Supports: No Walls 5 Infill: 25% Resolution: .25 Filament: TPU,…
![ReTimex [Ironman C30 rehousing]](https://media.printables.com/media/prints/528822/images/4909168_186bb58b-9aea-448c-bbf0-b59e91346659_76f46c20-3f58-41b9-90e9-9defece5c478/img_20231018_182632_922.jpg)
