2661 modeli
A pan flute, also known as panpipes or syrinx, is a musical instrument that works on the principle of the closed tube. It consists of multiple pipes that gradually increase in length (and sometimes girth) from one end to the other. Pan…
Wydruk około 5,85 €–7,15 € nettoWstępna wycena jednego wariantu
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails Hey everyone! 🦊🍂✨ I’m so excited to share this adorable Flexi Baby Red Panda with you all! These little fluffy cuties…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu
The 3D modelled Solder Paste and Flux Dispenser is a compact and efficient device, perfect for electronics assembly. Its ergonomic design makes it easy to use, with adjustable dispensing volumes ensuring accurate and consistent results…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
I've created a parametric bottle with a knurled or fluted cap that scales up as large as desired for the Gridfinity system. I've included STLs for some basic sizes, and my Fusion360 Archive file so you can generate your own. I like the…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
I designed these paint holders to store my paints on the pitched ceiling of my shed, but they'll work on a vertical wall too. They could be stuck to a wall, but they have countersunk screw holes for easy fixing. Covering most sizes of…
Wydruk około 3,91 €–4,78 € nettoWstępna wycena jednego wariantu
Yet another version of a syringe holder. This one incorporates 14x M10 nuts as weights, to give the thing a lower CG. … and feels much more expensive :-) pause print @17mm to insert the nuts or if not, don' stop :-) Cheers
Wydruk około 9,13 €–11,16 € nettoWstępna wycena jednego wariantu
Skadis holder for 20.5mm diameter (or smaller) flux syringes (x3), 16.5mm diameter (or smaller) flux pens (x4) with extra slots/spaces for storing various other soldering tools. Most desoldering pumps fit into the syringe spaces just fine…
Wydruk około 22,67 €–27,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Washer fluid lid for cars, 55mm diameter, Peugeot Partner, Citroen Berlingo and other models. The lid keeps the washer fluid safe for dirt if you are missing the original lid. Designed to fit direct on filler-neck. Fits well, a bit hard…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A plunger to get the flux or solder paste out of the syringe. Handy if your other one broke, or if you can't find it anymore :). Print Settings Infill: 25-100% (Depending on the nozzle and viscosity of the flux or solder paste) Brim: only…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
This is my take on a headphone desk mount. It prevents headphones from getting knocked off the mount pretty well.
Wydruk około 3,40 €–4,16 € nettoWstępna wycena jednego wariantu
License: Free for personal use only! For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails Note : I have updated the model with stronger joints. If the Cat head feels stiff after printing just give it a…
NOTE: I have updated the model with stronger joints. I like fluffy pets, so I thought why not make one and share with others! This fox is highly flexible. Keychain version is also added. Print in place License: Free for Personal use only…
Hey everyone! 💛 I’m super excited to share a cute Flexi Puppy ! This little guy is full of personality, featuring a playful pose and a fully articulated body that wiggles just like a happy pup 🐾 License: Free for Personal use only For…
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails Hey everyone! 🐶☁🤍✨ I'm so excited to share my newest design with you all — this adorable Cute Flexi Samoyed Keychain…
Learn how positional vertigo works by watching the crystals (aka "otoconia" or "otolith") fall and move through the semicircular canals of your inner ear anatomy with this educational model. We developed this anatomical model to promote…
Updates: 25.11.2022 - the block (bird) must be printed on its side, with supports. The slicer should generate supports between the two wings in front of the block. This has been forgotten when making the tutorial video. Crafty makers can…
This is a second Native American style flute, following my F# model from Printables. This time it's a smaller flute in the key of A. Since it's smaller in size, it can be printed vertically (standing up, in 3 pieces) on smaller printers.…
With an irresistible charm and a warm, this cartoonish lion cub 3D model captures the heart of the savannah in a playful pose. It promises to bring a touch of regal cuteness to any space.
This is another remix of the Thingiverse project of mordaha and remixed by Elektroarzt that I further optimized: use 1x M3x16 / 2x M3x8 screws with printed threads instead of M3x20 screws repaired Main.stl as the net was broken (it could…
Remix Changes: Removed the groove on the screw Removed the grooves counter on the body More tolerance on the body for the screw (0.5mm on each side). Compensation for bridgning. Removed the Holes in the nut as they serve only visual…
These are templates for my ski drill jig (found here ). If you have a printer that can work with bambustudio or orca slicer and want to use a my print profile with settings and pre-colored text (There should be profiles for 9.0, 9.2, and…
This is my version of the Flux Capacitor from the movie "Back to the Future" Resized to fit my print bed. Controlled with an attiny85 and NeoPixels Print instructions Printed in PLA, no supports needed. The "Crystals" are printed with a…
Whoa, Doc. This is heavy. The relay bodies and caps were remixed from myyellowminicooper's designs here: https://www.thingiverse.com/thing:4303759 Thanks to myyellowminicooper! Those designs were a great starting point for me. I made…
Quick design to cap a Luer-lock syringe with needle still on. Works best if you resize it to fit your particular needle, as there are a few different sizes, so I've attached the solidworks file also. So far it's the best easy and cheap…
For assembly, you will need an M5 x 90 DIN 912 screw with a full thread and a cable lug with a diameter of 3.9-4 mm (cable lug for a wire with an area of 6 mm2) or M4х16 DIN 912 screw with nut.
I improved the design to use threaded inserts, added a knob, and uploaded STEP files
Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to push out flux, so I designed this! I recommend orienting the large end of the plunger to sit on the print bed so there…
I hate using normal scrapers because they scratch the 3D printer bed, and plastic scrapers are not strong enough, so I made this scraper so the tip of the blade never touches the bed, but it gets very close to be effective removing the…
This plunger / piston was created primarily for soldering paste from KOKI provided in syringe (40g / 10ml). It fits as well some other syringes with paste or flux, like in my case: Amtech Flux 10cc. Working length is 80mm (diameter…
This small container integrates screw threads and aligns perfectly with the empty space in the upper lid of the rugged Pinecil/TS100/TS80 case. This was designed to be pressure fit without needing to be secured with glue. I can't attest…
This is a remix of a remix (from Elektroarzt) of the cool Thingiverse project (from mordaha) for a nice Flux/Paste dispenser that I optimized even further. The Addition of a bump stop limiting the angle the handle is able to open,…
maximum syringe diameter supported 18,5mm PLA
Here it is ! The flux capacitor from back to the Future (more square). It's an alarm clock and once the alarm goes off, it randomly plays sounds from the BTTF soundtrack. I provide everything to make it. How to use: Setup/Stop button: Set…
Do you ever feel the need of a little friend to keep you company when you're at your desk? You may have found one! It's a little fluffy bird, a robin, but he has no name, you can print him ang give him one! You don't need an ams since…
Update: Added Fusion360 files A holder for a flux syringe based on the gridfinity system created by Zack Freedman. Designed to fit the syringe that can be found here.…
Windshield Washer Fluid Cap - With and without print-in-place hinged lanyard. Example in photo was printed using PETG 100% infill without support or brim to fit 1998 Nissan Frontier. (2.25 inch)
Explore the exceptionally designed Flutterby Skull Bust 3D model. Categorised under "Home/Decor", this unique model offers an engaging display of skill and creativity by designer, LanternLore. The piece will certainly draw the eye and…
Resized, to fit the needle inside. Also, added a thin build-in brim, for better adhesion.
This can be completely 3D printed, but have some optional modifications for more realism. You can wire up your own lights and electronics, but I provided a design for a speed controlled PCB. 3D model preview Filament Colors: Grey, Black,…
Turn your MK3 into a Time Travel Machine with the Prusa MK3 Flux Capacitor, it can also be used as a rotation indicator. Print individual parts then super glue together, kind of a pain, but time travel isn't easy. Glue a 8mm (.315)…
Reduced diameter of head as well as ratcheting surfaces to allow it to fit a slightly smaller syringe inner diameter.
Two versions (smooth and knurled) provided. Print with sufficient brim! See also my Flux and Solder Paste Dispenser Remix
I need cup for my flux so I created one. This is designed for cartrige with "Future rework jelly" from Elchemco company. Inner diameter of cap on open end is 10.55 mm. Recommended to print standing with brim.
Container for flux or rosin for the TS100/TS80/T85 soldering iron. Fits into the small opening. I crushed the rosin, poured it into the container, and gently heated it with the soldering iron.
Lifestraw Peak STRAW adapter for backflushing with a bottle this filter is very strangely designed. the clean end only has a mouthpiece and no way to use a syringe or bottle in order to backflush it. the recommended way according to the…
Organize your workspace with elegance. This desk organizer features a modern, fluid design with a sophisticated fluted texture. Its unique organic curves provide multiple compartments of varying heights, perfect for storing pens,…
He's a real wonder behind the bar, able to serve up your whole party at once! This is a 28mm fantasy miniature, scaled to fit on a Medium (1 inch / 25.4mm) base, suitable for tabletop roleplaying games such as D&D, Pathfinder, etcetera.…
Add a bit of sophistication to your workspace with this fluted column trash can. This stylish and compact design helps keep your desk clutter-free. The flip lid opens smoothly and is print in place. Sleek fluted column design Two Parts:…
I'm fully embracing the pegboard as the optimum back wall of my micro workshop and am busily designing adapters for the various tools and supplies I want to have at hand. The multimeter is one of those tools, and I wanted a way to keep…
— import to PrusaPrints messed up the formatting, please see the thingiverse page for a better reading experience — A stand-alone FluxEngine based on the magnificent work done by David Given ( http://cowlark.com/fluxengine/ ) ~This…
Some modification. Thanks to Author. Print instructions Category: DIY Print Settings Printer: Vertex K8400 Rafts: No Supports: No Resolution: 0,1 Infill: 25%
This is my flush wall mount adapter for a genuine Raspberry Pi 7" Touch Display. I used this as a friction fit into the hallway wall area of my home for a Home Automation kiosk. You can see more about how I used this panel here:…
This is a Crossover from the Original and there Remixes. I Like the Design but the Original Files are not ready to use. What i used: -The Nut from the Original (Perinski) -The new threaded rod with more space from aethenelle's Remix -The…
Hinge pin retainer for the HPI Savage X / XL to avoid the bumper supports to twist and prevent that the pins holding the upper arms get lost. ATTENTION! If you own the updated Savage model from 2022 or installed the swaybar set ( #102538…
Fits your standard 10cc and 30cc syringes. Small drip tray built in. It does definitely need magnets in the base, since it is so tall. These can be printed in one go without supports, but once you get above ~80mm you will want to slow…
Scalable, easy to print with flat bottom and minimal supports needed. Check out my whole collection of animals! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld ( https://makerworld.com/makerlab/imageTo3d )
I've been using the same Radioshack solder spool for 20 years and just refilling it when it runs out. I didn't want to give it up so I remixed the original model to cradle it. This should hold 3 desoldering braids and 2 Flux pens. The…
This is a 2x2 Gridfinity organizer for some of my soldering materials. I use Kester 1lb rolls of solder, which are about 60mm diameter. I found dedicated solder holders are not space efficient, so I wanted a combo organizer. I also like…
Scalable, easy to print with flat bottom and minimal supports needed. Check out my whole collection of animals! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld ( https://makerworld.com/makerlab/imageTo3d )
As described above, I only slightly altered the original design here. OP, you can add this to your library if you like. FIXED: I put the insert for the wrench too deep and it kept breaking the threads. This version is thinner but you get…
🦠 Cartoon Avian Influenza Virus – 3D Model Bring science to life with this educational, cartoon-style Avian Influenza (AI) virus 3D model ! Perfect for classrooms, outreach events, poultry professionals, or science enthusiasts — this…
(SuperFlux or HyperCore) to XR rail carrier blocks modified to match the style of OG XR PubHubs. The primary feature (a clamp) aims to reduce strain on the center axle bolts by applying a clamping force around the axle in addition to the…
Created this Gridfinity 5x1 (3U tall) holder for the Pine64 Pinecil Soldering Iron , plus 2x flux and a tube of wire.
Overview This model depicts a broken classical column , styled after the fluted columns of ancient Greek and Roman architecture. The column appears fractured at the top, as if unearthed from ruins, and sits atop a stepped square plinth…
SUPPORT YOUR COMMUNITY AND BE PART OF THIS MOVEMENT! See this movement in my city! https://gizehtriana96.wixsite.com/gizeh Faster-Print.stl : Reduce 2 hours and half in time printing. No more "horns" in front part. 14 g For kids. No…
A classic three-headed guardian hound inspired by myth and modern fantasy stories. Cerberus was guarding a Philosopher's Stone and was named Fluffy in Harry Potter. It is ideal as a tabletop boss, dungeon gatekeeper, or dramatic display…
Computer bay mount for JetKVM. Fits into a double-height 5.25" bay. The JetKVM itself is now flush(ish), so it doesn't stick out so much. Additional parts: JetKVM & ATX Power Control https://jetkvm.com/ Mounting bolts for the JetKVM: 2x…
onShape CAD version of Fungineers Superflux new mounts done from scratch. All credits to Rick, who did a great job. Uploading with his permission
READ THE MATERIALS AND HOW TO ARM BELOW. Coronavirus arrived in my country México and here in my state the pharmacies have already exhausted the covers, gels and masks. There are some protection but all of this stuff is very expensive.…
This mask was used in Czechoslovak Republic during Spanish flu (1918 - 1920). This model is for women. Men would need ~10% bigger. Cross makes alignment to 0° and 45° easier. Model created according to the following schema:…
Store your stuff in the cloud with this wall mounted cloud shelf! This was a fun project to see if I could draw clouds with engineering CAD. Great extra storage for a bathroom or kids room. Screw the mount into the wall long side facing…
Pipe flushing nozzle for 1/2” garden hose If necessary, secure the nozzle with a cable tie to prevent it from coming loose. I printed mine from TPU, as this has very good layer adhesion and practically cannot break off.
There are two design options, one with round corners and one with straight corners. Printed upright, neither should need supports.
I was looking for a case design and could not find one. Additionally I wanted to make sure it was padded so that the R2 would not be shaking about the case. You will need 3x6mm foam tape to ensure that it fits perfectly. According to how…
(SuperFlux or HyperCore) with Big Tire (11.5"/12") to XR rail carrier blocks modified to match the style of OG XR PubHubs. Thanks to @viperbite for help with getting the cover M2 bolts placed nicely. The primary features: A clamp - aims…
Scaled down 5" version of Riddim Rider's Onewheel XR/Pint Rim Saver , possibly functionally pointless and mostly intended for stylizing Onewheel/Funwheel/Floatwheel 5" hubs such as Fungineers' 5uperFlux , The Float Life's MTE , or…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
This is a 3D printed frame into which you can glue/silicone sealant mount a laser cut acrylic window. This allows the windows to sit flush to the interior wall of the test section. This significantly improves flow quality. A 1/16 inch or…
I printed this with PLA, flat side of the bracket down on the printer plate. The locking mount feature of the RM4 pro already had a good fit from the original 3D file. Two screw holes provided.
This is Bowl 006 of my bowl series! I've included two versions. One version can be printed in vase mode, and one version can be printed normally. The overhangs are pretty tough, so make sure you have adequate cooling while printing the…
Scaled down 5" version of Exit7212 's 6"/6.5" rim protector, possibly functionally pointless and mostly intended for stylizing 5uperFlux and MTE hubs. Untested as of 2/12/26, will be tested upon the 5uperFlux motor's release late…
Modern architectural watering can with a fluted texture and precision spout. Designed for style and utility.
Compact glow‑in‑the‑dark EDC keychain tag for quickly spotting your keys at night multiple variants. Version 1 with a subtle textured surface created using bumpmesh . Designed for clean edges, even glow, and reliable everyday use.…
Printed with .4 nozzle, 2 walls and 5% infill and it is perfect.
I made a replacement toilet flush handle — Toto lever style vs. rotation — to replace a cheap chrome-plated plastic one. Aside from not matching the rest of my bathroom remodel, the old one was a plastic replica of a genuine Toto…
A Bart Dring 6X CNC controller case design I made for my own use. For ease of swapping out the controller, I built the wiring around a 26pin “aviation” connector to be able to just take out one controller box and insert another without…
brackets for hanging lights without the need for long chains.
Fluidized Bed Reactor, or simply a fluidized bed for use in media contact in reef aquarium system. I will be using it for contacting with Iron Oxide Hydroxide for phosphate removal but it could be used to contact with any other type of…
Multicolor : Hi everyone! I don't have time to create a multicolored version optimized for those who don't have cfs-ams-mmu3 right now! If this model interests a lot of people, I might dedicate more time to it, but right now I'm not even…
Mounting clips for the Official Raspberry Pi Touchscreen. Designed for flush mounting the screen on a 3mm acrylic panel, material unimportant as long as it's 3mm thick. Check pics for usage. Reach out with any questions. Mounted with…
Sorry, folks, but this thing is unfortunately only for German flush-mounted equipment sockets. GERMAN: Halterung für Wandlampen mit 64 mm Basisdurchmesser für die Befestigung direkt auf einer 68 mm Unterputzdose mit Geräteschrauben 3,2 x…
Bracket for a 60 mm flush-mounted box
Nachdem das Abflussgitter gebrochen war habe ich es etwas dicker nachgezeichnet. Passend für 175mm Abfluss
I did a fluid simulation in blender and printed it :-D A friendly person asked me if I could seperate the models for printing in different colors. Of course I can. But because the object will fall over very easy, I also made a V2 with a…
A few sizes to use a bushing lined flush cutter router bit to cut out a spot for my makers coins.
### Overview This is an extended Luer Lock cap with an increased length compared to popular models. Unlike standard caps that only fit empty syringes, this design fits directly over a syringe with a needle already installed [cite: 1, 2].…
![Flux/Solder paste Cap [remixed]](https://media.printables.com/media/prints/765556/images/5962560_42e2b9de-c5d4-4d1f-a72f-6da832c9d4ca_a82fceed-a95f-4b44-8cb0-6f1974d7d5f2/img_20240215_015342.jpg)
