Liczymy pasujące modele…
Just got my Yaesu and realized I needed a stand to tilt the radio up, and provide a place for the microphone to attach. I came up with this simple model. This holds the entire radio and not just the face which is what I wanted. I printed…
I needed a home for the mic, something strong that wouldn't stand out. Printed in PETG using the “Strength” profile on a QIDI Plus4. Designed to mount on the right side of the Yaesu FTM-150R + Ford Fusion 2016 Detached Head Mount using…
FTM-500D Mounting Bracket to fit AMPS style platforms I wanted to mount the FTM-500D radio in the vehicle but wasn't super happy with many of the options I found. I bought a platform from https://www.bulletpointmountingsolutions.com/ and…
The Yaesu FTM400 VHF/UHF amateur radio transceiver has a separate control head that can be mounted away from the main body of the transceiver. It comes with a sheet metal stand that can be attached to a top surface, but the back of the…
Keep your FTM‑510 safe and accessible with this sturdy shelf mount. Designed for easy installation and a clean setup, it’s the perfect solution for organizing your radio station.
A desk top unit to hold your FTM-500 series radio consisting of the main frame, with left or right side option for the microphone. A separate holder for the radio head unit that is used to attach to the main frame or be used separately to…
CO2 Luftmonitor aufgebaut auf ein ESP 30 Pin Entwicklungsboard mit SCD41 SPG30 BME280 TFT Display st7789V und einer LED WS2812. Auf Basis von ESPHome in Homeassistant. Gedruckt auf eine Prusa MK3 S+ mit Marmor Prusament. Die…
Dash Mount for Yaesu FTM-310DRASP This is a very simple dash mount that fits reasonably well on my 07 Honda Fit's funky dash. The base pad is dimensioned roughly 2" x 4" to fit a commonly-available pre-cut velcro strip (use the highest…
This is a slide-in housing for the LiftMaster 373LM garage door remote. This mount is designed to be adhered to a vehicle surface so that you can use a strong, heat resistant double-sided tape. Before this I was using adhesive…
I made this for my father to fit his radio in dodge durango under car's radio
My sister asked me to make this for her gym's Christmas party. If you or a fitness nut you know needs a little help dressing up their tree this year because they're too busy pounding the protein shakes, help 'em out! There's also a…
With time the wheels of my Craftman lawn mower came loose and got out even if the bolt is in place. The wheel hole now has a conical shape and the back of the wheel is worn too. With those 2 parts no need to change the wheel. The flange…
My FTM-500DR control unit took a tumble and I lost one of the knobs after it popped off. Yaesu didn't respond to support requests so I decided I didn't want to wait and printed my own replacement knob. I've made two versions of it due to…
This is an adapter for inflating a Forclaz Trekking MT500 Air mattress from Decathlon with an inexpensive electric mini air pump from Pacoone (square version with lamp). The adapter is simply inserted between the pump outlet and the…
An STP stencil for those FTM / AFAB / etc. who would like the convenience of using a stand-up relieving station without the use of a packer, or those who don't mind their current equipment. (Sorry about the vagueness of language here,…
My garage door opener was activating on accident. This is a simple cover for the remote that prevents activation of the large button. It's held in place by friction and the notch on the rear of the remote helps to slide it out. Category:…
This is a replacement shell for the LiftMaster TX2/4EV remote, designed to work with the original rubber buttons and screw. Two versions are available: a solid model and one with a small cutout for viewing the LED indicator. For the…
With the Xmas “Merry Chriftmaf” cookie cutter, you can transform your favorite cookie dough into fun treats for the holiday season. Happy baking! ;) Adjust the size of the cutter by scaling all the parts accordingly. For the best results,…
16x16 motor softmount and arm protector for the gatehunter RS5. Armprotector with bumper are intended to be used for the front arms. Category: R/C Vehicles
Tesla does not have HomeLink. In my opinion, clipping a garage door opener onto the visor ruins the interior's clean and minimalist aesthetic. Instead, I made this part to hold a Liftmaster 374UT universal remote. The part fits neatly…
This is a side cover for the FTM-6000. M-Lok compatible slot for adding an antenna mount. This design is based off of the the Armoloq TTP-6000. This is a v.1 and has not been tested. Will work on left and right sides. Antenna mount can be…
Made this cover to keep the one button we use from activating in my pocket.
I designed on Fusion 360 a replacement wing nut for my Craftman lawnmower. You just need a standard nut that you can insert in. You can glue it if you want. I have used black Materio3D PLA material.
An attempt at a temporary remote head bracket for the Yaesu FTM-500. Yaesu Original Part Number: RA6440200
This is is a bracket designed to attach a Yaesu FTM-150 control head and microphone to any AMPS (30 x 38mm) pattern mount. It works well with RAM mount or Lido Mount components for mounting the control head in a vehicle or even on a desk.…
I printed the model with PETG, 0.6mm line width, 0.3mm layer height, 24% infill, and mounted it onto a piece of MDF (approx. 295 x 165mm) which I could then hang on the wall. All brandnames and productnames are trademarks or registered…
Welcome to my second model. I made this out of PETG for rigidity. It hooks over the top of a flat panel monitor and supports the head unit for a Yaesu FTM-400 (and XD). This is not compatible with every flat panel monitor in existence,…
Just got my Yaesu and realized I needed a stand to tilt the radio up, and provide a place for the microphone to attach. I came up with this simple model. This holds the entire radio and not just the face which is what I wanted. I printed…
I was tired of my FTM-300D sitting flat on my bench. I kept bending over to see the entire display. So, I looked around on the Internet, thinking I could find and print something. I couldn't find anything, so I took to Fusion 360, and…
Designed a mount for the Yaesu FTM-500DR/510DR for a Model 3/Y Tesla. My Tesla is older with the flip up charging tray so I needed something the tray would clear hence the offset. There's a 18mm hole that will allow an M5 thumbscrew to…
A variation of my original Yaesu FTM-500/510 Tesla model 3/Y mount that sits flush on the bottom left of the center console screen produced in collaboration with Sam M. He had a folding hinge bracket we fit to the model to allow you to…
This screwdriver was recommended by Project Farm so of course I bought it. Made an organizer for it.
This is a faceplate / trunnion for a Yaesu FTM-100D to hold it into a 10" rack. I based this on the 10" rack that many homelabbers are using for Ubiquiti gear. I thought a 10" rack would be perfect to hold two way mobile radios. This…
LiftMaster 78LM Multi Function Garage Door Control Panel Door open/close button. This is just the cover for the open close door button, not the entire housing. Printed on Overture transparent PETG.
Pad to adapt my Liftmaster 2.5 Ton Low Profile Jack to the frame rails on my Nissan 350z https://www.amazon.com/dp/B07KPN94VM Print Settings Rafts: No Supports: Yes **Infill:** 100 Filament: Overture PETG Red Category: Tools
Teile: 4x Kugellager: 10x15x4mm 1x Kugellager: 5x11x5mm 1x Dichtungsring: 7x4x2mm 1x Airsoftball: 6mm 1x Schrauben: M3 Senkkopfschrauben 8x Schrauben: M3 1x Acrylglasrohr: 20x17x32mm 6mm Schlauch Holz oder Metallstange 5mm Werkzeug:…
Size: 4x3 Height: ~4U, ~6U with charger
This will allow you to push and hold the 3 buttons needed to put the radio in cross band repeat.
Wenn ich die Luft aus unseren Schwimmtieren und Luftmatratzen auslassen wollte, fand ich es immer ziemlich nervig mit einer Hand das Ventil zu drücken, deshalb habe ich mir diesen Dorn gedruckt. Jetzt nur noch das Ventil öffnen,…
I recently bought two Ikea stoftmoln (37cm variant) light fixtures for our dining room. These light fixtures are meant to be used/placed over a ceiling power outlet, something which we don't have in our house. They also look kind of ..…
I took a while to get the geometry more-or-less matching to replace the bag hook/ash-tray for these trucks. I'm currently using mine to mount a Yaesu FTM-150 dual band amateur radio, but I've included the blank mesh, and step files for…
Spacer for the Ikea Stoftmoln 24cm ledlight to create a 25 mm gap between the backside of the ledlight and the ceiling. Print three to fit in each of the mount points on the back of the ledlight. Version available to print on side that…
The original "ring" on the mic of my FTM-400 XDE was not really useful for hanging the mic anywhere - so I made a new one. I should work with other Yaesu microphones as well, let me know if you made it work with your transceiver!
Replacement for the buttons/middle plastic piece of an 895max garage door remote. It isn't perfect but it worked for me. I printed it vertically with the buttons up. It doesn't matter much cause it'll use lots of support either way. The…
Printed with OcraSlicer, Flat. 4 walls .2 layer height and tree supports.
Shortened arm length, reduced depth of mic slot. Worked better in my case, thank you to the OP for making this design.
Thank you to the original designer ( https://www.thingiverse.com/thing:3198588 ). I remixed it to add some little toes to make it look more like a gecko. I also remixed it to a motor softmount (a little too large, it bends a little on the…
This is a basic desktop stand for the Yaesu FTM-150R dual-band mobile rig. It sits the radio up 2 inches at a 10 degree slope. The central ventilation ports are totally exposed. There's space under the control head to set down the mic.…
Update 10-4-2025: the double-sided tape held temporarily. I have added M3*20 screws after drilling into the backside of the dashboard rails (meeting soft plastic inside). Bracket for mounting the Yaesu FTM-150R detached control head…
I needed a home for the mic, something strong that wouldn't stand out. Printed in PETG using the “Strength” profile on a QIDI Plus4. Designed to mount on the right side of the Yaesu FTM-150R + Ford Fusion 2016 Detached Head Mount using…
The Ring Adapter is designed to securely lock the Quad Lock Pivot Arm Ball in place, preventing any unwanted rotation on the Yaesu FTM-510 (and compatible FTM-5xx series) chassis. It provides a firm, reliable connection between your radio…
This v1 model I created to have a print in place pin on the hinge side, and screw to the shimano shifter. On the clamp side, I installed a M4 heatset insert and a M4 bolt. It has worked for me so far, but I am also planning a redesign to…
This remix shortens the original Garage Door Sensor Sun Shield by 20mm to better suit the Chamberlain Group LiftMaster 041-0136 safety sensors. The adjustment ensures a cleaner fit without interfering with alignment or mounting, while…
New version: https://www.printables.com/de/model/1008549-force-sensor-for-phyphox An esp32 based force gauge to measure forces from -9.81 N to 9.81 N. You can read the data through phyphox on your Smartphone or with any serial…
Replacement light diffuser for liftmaster early 2000's model(s). Posting two versions. 1) Thickness compatible with original 2) Thin wall.. 1.7mm so that will be three layers. The corners have more material around the mounts points since…
Almost any material will do the job - I've printed mine with DevilDesign Matt PLA
This model uses the control board from a generic Liftmaster/Chamberlain/Craftsman garage door opener remote ( generic link ). They're a dime-a-dozen on Amazon and chances are they work with your garage door if you're in North America.…
Overview: This is a sun shade I designed for Chamberlain/Craftsman/Liftmaster compatible safety sensors. It is tested with the Chamberlain Model 820CB, but should work with any similar Chamberlain/Craftsman/Liftmaster sensor. Why Do I…
I created this model to prevent someone from unlatching the deadbolt from the outside. The LiftMaster 841LM Deadbolt can be installed on the left or right of your garage door track, but this placement makes the manual unlatch on the…
This will adapt a Yaesu FTM-510 or FTM-500 to a standard 38x30 AMPS mount using a 5mm stud. Or any other radio that uses a 5mm stud. It is designed to work with a quick release adapter that attaches to the device, rather than screw…
FTM-500D Mounting Bracket to fit AMPS style platforms I wanted to mount the FTM-500D radio in the vehicle but wasn't super happy with many of the options I found. I bought a platform from https://www.bulletpointmountingsolutions.com/ and…
The Yaesu FTM400 VHF/UHF amateur radio transceiver has a separate control head that can be mounted away from the main body of the transceiver. It comes with a sheet metal stand that can be attached to a top surface, but the back of the…
Keep your FTM‑510 safe and accessible with this sturdy shelf mount. Designed for easy installation and a clean setup, it’s the perfect solution for organizing your radio station.
A desk top unit to hold your FTM-500 series radio consisting of the main frame, with left or right side option for the microphone. A separate holder for the radio head unit that is used to attach to the main frame or be used separately to…
CO2 Luftmonitor aufgebaut auf ein ESP 30 Pin Entwicklungsboard mit SCD41 SPG30 BME280 TFT Display st7789V und einer LED WS2812. Auf Basis von ESPHome in Homeassistant. Gedruckt auf eine Prusa MK3 S+ mit Marmor Prusament. Die…
Dash Mount for Yaesu FTM-310DRASP This is a very simple dash mount that fits reasonably well on my 07 Honda Fit's funky dash. The base pad is dimensioned roughly 2" x 4" to fit a commonly-available pre-cut velcro strip (use the highest…
This is a slide-in housing for the LiftMaster 373LM garage door remote. This mount is designed to be adhered to a vehicle surface so that you can use a strong, heat resistant double-sided tape. Before this I was using adhesive…
The Yaesu FTM-150R(ASP) is a pretty good radio for working FM repeater satellites. It is able to do crossband duplex, has good harmonic filtering, and has a good receiver. It is a bit clunky to use with a handheld beam antenna (Arrow or…
LiftMount clips firmly to your car vent and holds your MagSafe charger flush and rattle-free. Minimal form that blends into the dash. Prints in one piece—no supports. Part of the LIFT series. If you would like to help support my work…
Little Town replacement for the House and the Craftman : my kids lost them and I recreated them to be able to play again They are far from perfect, but it does de job.
The spacers in my opener went out, so I fixed it, for next to nothing, 3 hours later. OEM kit is about $10 with 5-7 days shipping. To get them close to the OEM "durometer" or function of the original spacers (soft start on the plastic…
I decided I needed a good way to get my FTM-300 out of the way on my desk, so I made a mount for it. This is designed to hold the new style mounting cage that Yaesu is using that allows the radio to be released with a single lever. The…
Our vehicle has no convenient place to attach an amateur radio transceiver, or even the control head for it. It does have a console panel with a very smooth surface that will permit use of suction cups. While not ideal, they will hold for…
Riftmaw Horror Statue A dark fantasy creature statue featuring a terrifying monster with a savage, otherworldly presence. Designed with boss-monster energy, this piece works well for tabletop displays, fantasy shelves, horror collections,…
SabotageRC Dingo arm protector / softmount - Fist! Print with TPU It also fits the armattan mongoose arms Category: R/C Vehicles
3B-R 2207 Motor Pants and softmount print with tpu for softmount Category: R/C Vehicles
Die meisten Ventile verfügen über eine Sicherung, damit die Luft nicht einfach so entweichen kann. Einfaches entlüften durch einstecken. Der “Dorn” ist innen hol. Druck mit PLA, PETG usw. mit 60% Infill, damit er ausreichend stabile ist.…
Desk stand bracket to hold the facia panel of the Yaesu FTM-100D at a 45 degree angle Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: Sunlu PLA+ Black Category: Other
This wall plate allows you to neatly place two Chamberlain (Or LiftMaster, or Sears since they are all made by the Chamberlain group) wall control panels side by side. It has channels on the back side to hide the wires. You can use a…
This model is based on the original Ham Chest Design from SwiftyTheFox. Thanks for sharing! Since the FTM-300 has a slightly different housing than the FTM-400, the original mounting plate does not fit. With the modification the…
Prints ok with 0.6mm nozzle. Do not use PLA unless it's used indoors. I a car window you need to use PETG or better filament to withstand the heat from the sun. The original bracket was screwed on so you needed tool to remove the display…
SwiftMount Pro is a sleek and modern quick-release plate designed for tripods. It’s an upgraded version of the classic “Quick Release Plate for Tripod,” with improvements in design, usability, and functionality. Features : Sloped Design :…
Needed a way to mount the garage opener without making holes to the wall. Decided to make a plate that the garage opener can be secured to; then the plate can be taped to the wall. Used a tape measure to get the dimension, therefore I did…
Side rails for AnyTone AT-D578UV, and Yaesu FTM-400 (probably also FTM-100) Do not use too long of screws, or you may damage or destroy your radio! Side rails are 8mm thick. Rails are tall enough to leave an air gap under the radio. I…
Side rails for old Yaesu FT-100 mobile HF/VHF/UHF Radio. NOT for modern FTM-100 UHF/VHF mobile radio. Side rails are 8mm thick. They are tall enough to leave an air gap under the radio. Printed with PETG, 20% infill, on Prusa MK2. Used…
So, we have a 2 car garage and unfortunately, my car doesn't use the “big ass” button on the liftmaster remote. The liftmaster remote has a pretty unique side profile, but I made a sleeve that fits it and only exposes my button so that I…
All files including design files are on my github (https://github.com/gx1400/3dprint_subaruoutback_consolemount) Be sure to print in PETG to be more temperature tolerant # Changelog 2022-12-13 - Initial Commit ## Design Autocad Fusion 360…
Yaesu FTM-400 desktop stand Print instructions Unassociated tags: ftm 400, ham radio Category: Electronics Summary Yaesu FTM-400 desktop stand
Simple modification of a different model. I cut the top of the original off to make it a remote mount. It holds the opener in place firmly, could be mounting in any orientation I think. *Edit 20230402* You may want to add supports for the…
This is a new enclosure for the LiftMaster 3-button garage door opener. It is minimal in size. The original LiftMaster opener is bulky with a clip on it. Further to that, its plastic eventually degrades and the buttons fall off. This is a…
Sprocket cover for a Liftmaster of Chamberlain garage door opener. Part number 03100380 This cover is to protect the sprocket the runs the chain on the top of the garage door opener. Print Settings Printer Brand: Creality Printer: Ender 3…
Handle for a edge trimmer Craftman C3 19.2v. Mine broke, parts are no longer available, so I build one. Resuse the same screw. Print Settings Printer Brand: Anycubic Printer: Large Size Chiron Rafts: No Supports: No Resolution: 0.2mm…
There are 3 open “ports” on the back of the FTM-300DR radio chassis - two speaker ports and one data port. These ports are left unprotected when they are not in use. This print is a simple “friction” plug that spans all 3 ports and…
The Ikea Stoftmoln 37cm ledlight do not have any room between the roof outlet and the lamp so i created a triangle that gives 47 mm space to be able to house the powerconnector. Screws used to fixate to roof was 4.2 x 55mm. The triangle…
