Liczymy pasujące modele…
This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the rabbit's feet.
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
This is a simple holder for a XIAOMI Digital Temperature/Humidity Sensor (LYWSD03MMC) . I attach the holder to the wall with a small command strip . I use several of these sensors with ATC MiThermometer custom firmware and collect data in…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Sonoff SNZB-02 sensor is a simple and cheap ZigBee temperature and humidity sensor. The default mounting option is using a sticker to attach it to the wall. However, walls tend to be colder than the room they are in due to thermal…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple holder for a humidity sensor. You can install the sensor from above. As there are two versions of the sensor I've made two versions of the holder. The small holder is for sensors with 6 holes in the back. The large holder is for…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the tail or feet.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Temperature & Humidity Meter Stand 360 degrees Temperature & Humidity Meter Holder 360 degrees for Prusa i3 MK3, MK3S & MK3S+ https://www.amazon.co.uk/dp/B07QH1MYPY?ref_=cm_sw_r_apin_dp_DXMTDF2ASNR0AGST3CJ2&th=1 Filament: PLA or PLA+ or…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
A simpel stand so the sensor is not laying on something. Standard is tight fit and angle of 30 degrees. Easy print with supports. I used organic supports.
Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a quick little gauge holder I made to hold a Mini Digital Thermometer Hygrometer Indoor Humidity Monitor Temperature Humidity Gauge I got online. Prints in an hour and a half. I used supports, with window up. Here is the link:…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple and functional stand designed to hold a small temperature and humidity sensor at the perfect viewing angle. The model is split into two pieces to ensure clean printing without any supports — just print both parts, add a small…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
I was in need of a simple stand for a typical square humidity sensor. I'm currently using it inside of a filament storage dry box, but there are plenty of other use cases for it. I printed mine out in PLA with a 0.2mm Structural setting,…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Temperature and humidity sensor holder with a stand. Designed to be used alone or with LEGO Minifig Hexagons . Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PLA+ White Slicer: UltiMaker Cura Resolution: 0.2mm…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
How to use The device measures temperature, humidity and pressure and sends data to the server for analysis. This software can be adjusted to the needs: LaskaKit/Weather_Station_Mini Bill of materials Item Model ESP32 Development Board…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Printed with PLA and PETG - 50% infill, both work perfect. Best use organic supports only on table.
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
A Temperature & Humidity Mount for the Prusa i3 MKS+ which mounts on the side of the frame. I created this to monitor my Lack Enclosure cabinet temperatures (I've left the PSU) internally in the box for now - This Xiaomi device has been…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Created a door insert to add a humidity meter to the printerbox door and the spool tank door. Easy to print without support.
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Digital Temperature and Humidity Sensor Mount My Enclosure is a completely sealed unit. This causes some issues with temperature regulation and humidity. This sensor I bought off Amazon and I decided to mount it to my enclosure so I can…
Wydruk około 2,49 €–3,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A custom-designed wall mount for the ESPHome 8266 Temp/Humidity/Light Sensor , providing a secure and neat installation. This mount allows easy access to the sensor while keeping it organized and functional in any room. Designed to be…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
This version of the spool holder is WITH hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Blog article: Drybox build instructions .
Next remix of Drybox for Prusa Printer Enclosure V2 - with humidity sensor. Print instructions You can place five pieces of this drybox on the top of the Prusa Printer Enclosure V2. Can be used as a standalone spool holder for Original…
Small stand for Bambu Lab AMS unit to hold a hygrometer. The Hygrometer was purchased off Amazon and was a "JEDEW mini hygrometer"
Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…
This is a simple humidity sensor mount for your filament drybox. I've created this to fit the IKEA samla boxes, but should work fine with any transparant storage box. It is designed around those cheap circular LCD temperature / humidity…
Hydra Compatible 4.1 Model updated for Errors in model that someone reported bambulab 2 row desiccant holders, this works with a hydrometer and sits behind it as well in total you can fit 5 inside, 6 without the hydrometer and you do not…
Einfacher Druck zur Befestigung des Feuchtigkeitsmessers am Anycubic ACE Pro. Als Feuchtigkeitsmesser habe ich diesen von Alliexpress verwendet: Link Neu : Passend dazu habe ich noch einen Behälter für Silica Gel entwickelt, der ebenfalls…
After some research, I came to the conclusion that the best and cost effective way to keep filament dry , is to use a cereal box. These are cheap and provide a perfect seal from the elements. This build adds a Hygrometer and Thermometer…
I wanted to get a notification, when I needed to change silica. I remixed @Thomas_63847 model to fit my Aqara Sensor. Printet with tree support.
I like the idea of varstef75's sensor holder, however the curved hanger is unnecessary thick and the sensor frame is a bit too small. So, I redesigned it from scratch, using half of this holder instead, which should fit the sensor easier…
Easily removable & refillable desiccant cases for unpacked silica gel for the Bambulab X1 AMS. This is a second version of this one , I added caps & humidity sensor support. Printing (<20min): PLA/ABS/PETG/… 0.4mm nozzle or less…
Mount for a temperature or humidity sensor on top of the Prusa MK3S printer. Sensor:…
Desktop stand for Xiaomi LYWSD03MMC temperature and humidity sensor. Original design by the thingiverse user pasiz I modified it for a better fit, the original was kind of tight.
I optimized this file " https://www.prusaprinters.org/prints/4583-drybox-for-prusa-printer-enclosure-v2-with-humidit " so that you can print them in two different colours. :)
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
I remixed a modell for Xiaomi Mi Temperature and Humidity Monitor 2. And I designed a specific funnel for easier filling. HF!
I decide to design an indepedant holder for rectangular sensor, to allow use on different position : works on desk works inside an enclosure works on to of an enclosure I defined wich angle allow this several usage I propose 2 design :…
This is the second design of my little home automation sensor box. I've flashed it with ESPHome making it really easy to use in Home Assistant. Powered via the USB port on the Wemos D1.. doesn't work off a battery, this wasn't my…
I made a remix of this excellent radiation shield to use Aubess Tuya Zigbee Temperature Humidity Sensor. These sensors are very popular and available, so I wanted to try them outdoor. Buy here Size is compatible with the original design…
I have bougtht several round Temperature and Humidity Meters to put them inside the filament spool holders. I have used one in my 3D printer chamber for temperature and humidity indication. These meeters are tiny and round. I could have…
Hello Everyone This is my second project for the Xiaomi temperature and humidity sensor. The first design is to change the color of the sensor housing for use in the Bambu Lab AMS System or the second version to change the color of the…
I bought a SUNLU Filament dryer to help solve my filament moisture issues ( https://amzn.to/2JTUdNk ). I designed a mount to use the small rectangular temperature/humidity sensors ( https://amzn.to/372N2eJ ). It uses the upper filament…
Summary A case for a temperature and humidity sensor powered by an Arduino uno board. The case fits: an Arduino uno a small breadboard a 16x2 LCD display a DHT11 temperature and humidity sensor The parts are locked in place by melting the…
The original design is of course, required for every ECC. I wanted to add a slot to install an inexpensive Humidity/Temp sensor that I could see from my desk. Simply used Fusion360 to cut a tiered slot into the original model's Front Left…
This is a remix of Ondřej Stříteský's "Standalone Drybox - with humidity sensor". This version only contains the bottom without the hole for the humidity sensor. Get the rest from Ondřej's original. You can place five pieces of this…
Fixing the gap between the two components; now they fit tight together; Taking out the screw hole and replaced with a pin; New Air vents pattern This remix is used in my project here: https://www.thingiverse.com/thing:4352377 Enjoy!…
Simple wall mount for a Govee H5179 sensor. Flat back with screw hole for a fastener or use with a command strip or some double sided tape.
A stand to hold one of the cheap temperature-humidity-meter combinations available on amazon and used all around the 3D printing eco-sphere. Print instructions I printed the stand in PET since I had enough of it lying around, but it is a…
A minimalistic stand for mounting a standard hygrometer that is widely available in online stores such as Amazon. The sensor clicks in place. See the image regarding the sensor dimensions to make sure that your sensor will fit the stand…
Just a simple holder for those cheap panel mount hygrometers (widely available from ebay/amazon/aliexpress/etc). Print it face down, no supports needed (see .3mf).
There are a few humidity/temperature gauge holders on Printables but I found they were difficult to see, being either obscured by the heat bed, or by the extruder when printing. I made this one which is easy to see from the front door and…
A remake of the included mount for the SNZB-02D in case you want to make extras, and another mount for use on dry boxes. The other mount can also be used on windows, or any time you want to mount the sensor on the interior of something,…
Vent cover for AD5M/AD5X with integrated slot for temperature/humidity sensors. Also available without the hole for the sensor. Link to the sensor I used: https://www.amazon.com/dp/B0DXCSXT9X?th=1
A case for Arudino DHT11 temperature and humidity sensor. The case is printed in two parts. No glue or screws needed. The chassi may have to be cleaned from any residual before inserting the cover. The case can be mounted with…
This remix adds a mounting plate for a temperature humidity sensor to EnXLosure_Top_Door_Stop.stl , the Top Door Stop on the EnXLosure. You can use the Prusa Temperature Sensor https://www.prusa3d.com/product/temperature-sensor/ that…
Sunlu Filadryer Humidity Control It seems the Sulnu is good for drying filament, but can sometimes cause humidity to condense inside the enclosure. This item allows packets of silica gel crystals to be placed inside the filament roll.…
Adapter / Holder / Mount, for a common rectangular humidity and temperature Sensor. Can be installed and removed quickly - the same grip shape as the “Spool Holder”. Suitable for installation on the "Printer Frame" part. Material:…
Temperature and humidity display holder with integrated filament guide/bowden coupler it uses the screws that is holding the heating element, so be sure to use PETG/ABS or some other high temp stuff no drilling is required This is an…
Basic stand for the common temp sensor for enclosures, designed for minimal amount of filament (9,4g). Printed on the side w/ supports, ** May not need supports at all, refer to comment section and makes.
~3deg and ~5deg open lid variations. The 3deg allows the temp to get a few degrees hotter in my environment. My humidity reader always stays around 10% maximum with this mod. Without it, the humidity was always 20% minimum inside the…
Compact Case for use with the D1 Mini and a BME280 Temperature, Humidity, and Pressure Sensor. I designed this and use it for reading temperature and humidity in various locations around the house. I use that information for Home…
I have printed the parts using PETG filament as this was the only filament in blank white color I had in stock. Unfortunately the filament has a very poor quality. The filament appears to have very poor diameter accuracy. For this reason…
Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silica Ich habe mir eine Temperatur und Luftfeuchteanzeige für den Sunlu /JAYO Dryer S1 erstellt (Inspiriert durch andere Thingiverse Konstruktionen) Benötigt wird eine M6 Mutter + M6…
A stand for the widely available temperature and humidity monitors. No supports required, print face down. The monitor snaps in with no tools.
I bought a SUNLU Filament dryer to help solve my filament moisture issues ( https://amzn.to/2JTUdNk ). I designed a mount to use the small rectangular temperature/humidity sensors ( https://amzn.to/372N2eJ ). It uses the upper filament…
These mounts are designed to fit standard rectangular hygrometers/humidity sensors. The rectangular opening measures 45.5mm x 26.5mm, and is designed for the hygrometer to clip into. The rear of the mount is completely open to allow for…
A case for a humidity sensor system consisting of a DHT22 sensor, a Wemos D1 Mini, a 18650 battery holder and a battery charging module. Features: Sensor is thermally isolated from the rest of the electronics lid holds tight by press fit…
Super simple, quick to print holder for a temp/humidity sensor in a drybox. Holds it so it can be read from the outside, mounts with double sided tape so you don't have to drill or use any hardware, and it's easy to swap in a new one if…
This holds your hygrometer and thermometer nicely and it clips onto your MK4 frame. I've used this on my MK3S+ printers with great success and modified the file to fit my MK4. It also looks cool if you match it to your printed printer…
This is a model I designed a long time ago to hold the temp/humidity sensor for my filament cabinet in my Lack enclosure. It's a quick print, and can be used to mount the sensor on any side. I ended up hanging it upside down from the top…
Simple hygromneter (humidity sensor) stand for the Round type. Originally made for Dryboxes but I thought they might come in handy in other scenarios too. The slim version likes to tip over, its best for when glueing them somewhere.
Printed with Prusament PETG Jet Black 0.2mm no rafts or supports required.
This fits the new Anycubic Ace Pro that comes with the Anycubic Kobra S1 Combo. The temperature and humidity sensor used as well as the silica gel packets are listed below. Temp/Humidity Sensor: https://tinyurl.com/bp8r6437 Silica Gel…
My Smarthome Roomsensor Parts: Wemos D1 mini BME 280 BH1750 M3x6mm Screw I Use Home Assistant as Server and ESPHome to control the Sensor I send the Wemos into deepsleep and wake it every 5min for 30sec (dont forget to connect D0 and RST)…
Weather station / housing for TH08 temperature and humidity sensor, with dimensions: 70 x 25 x 21mm. Wall mount and blinds recommended to print vertically without supports. Top cover printed horizontally without supports, infill can be…
This is a stand conversion for a EEEkit Hygrometer (Amazon link, non-affiliate). You can use this to conveniently transform the hygrometer into one that can sit on a shelf You can easily snap the hygrometer into the "outer" casing; it'll…
Mount for common round hygrometers typically used by filament dry boxes. Intended to be mounted with 2 M3 screws to 2020 extrusion. I use this to monitor temperature inside my 3d printer enclosure.
I modified the original model to increase the size so it would accommodate larger zigbee temperature and humidity sensors like the ones from Tuya and Sonoff. I have also added a column off the back of it that includes a mounting hole so…
The print is very easy to make. To supports are needed. Place the hole on the plate. You can use https://www.amazon.de/dp/B07JG9QZ2B?ref=ppx_yo2ov_dt_b_product_details&th=1 as sensor. ######################################### Der Druck…
This is a holder to be attached to the empty HSW inserts, to insert the often used round hygrometers. With the slots in the back and the offset from the wall there is no problem in reading temperature and humidity. The hygrometer slides…
Hello Everyone I designed a housing for Xiaomi temperature and humidity sensor which I use in my AMS System. The original version only comes in white. I didn't want it to be so visible after assembly because of the white color. Therefore,…
This is specifically designed to hold the round “Thlevel” humidity and temperature sensor shown in the pictures. If you're here, you probably have some. If not, you can find them easily on Amazon. Print it face down. No supports needed.…
A simple outdoor housing for the Aqara Temperature and Humidity Sensor (Zigbee), based on the case from Andos . The case fulfills its purpose and protects the sensor from wind, rain and direct sunlight. It is also relatively compact, not…
a simple holder have fun
Simple angled stand (65 degrees) for Fahrenheit Humidity/Temp LCD Meter. Prints face down, requires no support. Update: added 45, 50, 55, 60 degree angle options to improve LCD visibility
Simple bracket for humidity sensor from Aliexpress. I know that this sensor is made for drilled hole, but I don't want to drill hole to my Ikea drybox. The bracket could be easily glued to the box by double-sided tape.…
Vent cover for AD5M/AD5X with integrated slot for temperature/humidity sensors. Also available without the hole for the sensor. Link to the sensor I used: https://www.amazon.com/dp/B0DXCSXT9X?th=1
hello!!! i made this ant nest, it is totally not a carbon copy of esthetic ants mesh nest :sob: pls support esthetic ants visit his shop and take a lookie Hydrate the nest every 3 days for species like lasius, and hydrate every week for…
So I made this box that can hold in place an Arduino Uno, a breadboard, an LCD (16x2) and there is also room for a dht11 sensor on both sides to make it more convenient to assemble. The box was also designed keeping in mind room for…
Changes from the original: - Shorter, the display is now in the curve of the lid - Display fits deeper into the print The screw from the original should still work. Mine fits right over the small tube that came with the box which is a…
Wall mount for the ThirdReality Zigbee Temperature and Humidity sensor found on Amazon ( https://www.amazon.com/dp/B0BF9W3WMK ). I made this because the sensor doesn't have any native way to mount to a wall and I couldn't find any…
This stand was specifically made to hold these meters https://www.amazon.com/gp/product/B07GNMKYCZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I know the design could have used less material, but I like them. Maybe someone else will…
I use these sensors (https://www.amazon.com/gp/product/B07D37FKGY/) in my printer enclosure and in my bathrooms to tell when someone is showering to kick on the exhaust fan to remove the steam (and turn the fan off after it's clear). I…
Inspired by the Drybox humidity sensor mount by RobMagus (link is under original model) I created a mount which is better fitting for metric nuts and bolts. The mount holds a cheap LCD temperature / humidity sensor and can be attached to…
Humidity/temperature sensor holder for a standard Creality 3D printer enclosure. Snaps right onto the metal bar at the side, so you can change the Z-angle how you want to see it. This is compatible with standard size humidity/temperature…
3D Printer AnkerMake M5C with eSUN PLA+ Total of an 1hr 27min and 37g of filament with out supports Parts to Print 4 x Container Roller - half (You may need to do a little sanding. I was able to gently hammer the bearings into place with…
Do you store your spools in vacuum bags for storage between prints, only to find it is super wet when you want to use it? This was the use case which led to this model - a humidity sensor which you can clip onto your spool while storing…
Need to increase humidity around a plant without turning your house into a tropical forest? Add this humidity pebble tray. Just add water and your pebble of choice. In order to be waterproof, add plenty of walls as well as top/bottom…
Wall mount for the Aqara Temp and Humidity sensor
I saw euzebio2's model and thought it was a great idea. I only found one problem: the distance from the case obstructs the temperature and humidity sensor on the back of the device. I decided to slightly adjust the measurements, and I…
