12 012 modeli
History of the miniature vice This is the completely reworked version 2.0 of my very popular miniature vise, which is much easier to assemble now. Around Christmas 2020, I had published the first version of my miniature vise here:…
Wydruk około 4,29 €–5,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspiration: https://makerworld.com/en/models/815908-over-door-hook-wall-shower-hook-many-thickness#profileId-767349
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Electric Cable mounts, mounted using screws D=3mm or double sided tape. Parametric using the STEP file :)
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Also my second version of the miniature vice became very popular right after it's release. If you don't have it yet, here are the files for the vice itself: https://www.prusaprinters.org/prints/53471 Update 23.01.22: New fully printed…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
I found wall mounted steps on amazon and thought this could totally been done with 3D printing. Please use care when printing and mounting, use drywall anchors or mount into studs. High infill is a must for strength. If needed scale it to…
Wydruk około 11,29 €–13,80 € nettoWstępna wycena jednego wariantu
A small thin radiator bleed key if like me you have no space to reach the valve with a normal square key. I added a 5mm hole for a keychain. If you like check out my other designs too!
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Nozzle contamination can be seen on the back.
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For my new Eurotronic Spirit smart radiator valves I needed a clean and easy adapter. There are many adapters out there that are quite bulky, couldn't figure out why that would be necessary... So designed my own in a few minutes. My…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Thanks to feedback from a user of my very popular miniature vice with table clamp, I realized that access to the the hand knob on the vice was a bit hindered by a part of the table clamp. If you don't have the vice yet, get it here:…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Attached is 25, 32, 40, 50 and 60 mm blank miniature bases. Also attached is the SCAD file if you want to modify. Want another dimension? Alter the width value of the OpenSCAD file and make your own. Printed at 0.3mm for speed. Round…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
A set of several messy bedrolls featuring messy blankets, pillows, and textures. These are great scatter because they are print-and-forget, and feature enough texture that you can get a lot of life out of them with practically no painting…
Wydruk około 1,34 €–1,63 € nettoWstępna wycena jednego wariantu
This is a drink holder for the Citroen Jumper, Fiat Ducato & Peugeot Boxer. The print area should be sufficient for most printers. (Diagonal printing) Function: 2 - cup holder 2 - pen holders 1 - Tray for keys or mobile phone Important:…
Wydruk około 14,97 €–18,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Paint holder for mini paints for the Skadis / Skådis system, three versions that fit either vallejo (or others of the same size), citadel or pro acryl. The dropper bottles (vallejo and pro acryl) fit either standing normally, or upside…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Radiator Valve key for easy bleeding. Radiators need bleeding when they have air trapped inside them.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Miniature director's chair. Printable without supports and in two colors by simply changing the filament (in height) in the 2 fabric areas. The original size is: 73mm (height) x 47mm (width) x 35mm (depth). You can use supports or accept…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Print 0.2mm layer height. No supports are needed. 10% infill.
Wydruk około 3,67 €–4,49 € nettoWstępna wycena jednego wariantu
A model of a Xebec sailing ship. This miniature is well suited for tabletop games such as Dungeons and Dragons. It comes with a version on a flying stand as well as a version with its bottom cut off to make it look like it's floating in…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update March 15, 2022 : Added simplified STL files. Blinky is the next step in evolution. Originally showing up in The Simpsons , we know his species lasts at least 1,000 years into the future as he also shows up in Futurama . Assembly…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Miniature woman for your diorama, architectural miniature or as a figurine. Woman | Girl | Tourist | Architectural figurines | People | Model Woman with long hair wearing jacket, pants, hiking boots and backpack. She is suitable for 3D…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Man | Businessman | Architectural figurines | People | Person The businessman is suitable for 3D models of city or architectural diorama. Printable for the most common scales (with photographer height 185 cm): 1/12 scale: 154.2 mm 1/24…
Wydruk około 1,01 €–1,24 € nettoWstępna wycena jednego wariantu
Just a warning, the tolerances on RA-N valves are pretty bad, so this might not fit you valve without some modifications, i designed it to fit my own. I made it because the one included in the shelly trv is badly designed. Print left,…
Wydruk około 0,18 €–0,21 € nettoWstępna wycena jednego wariantu
I designed this miniature crane truck in Fusion 360. It complements the miniature vehicles by agepbiz , Bryan and James Wood , all of which I also printed, but my nephew was missing a crane truck :-) WARNING: CHOKING HAZARD - Small parts.…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Simple and stable hanger hook. Click fits Stays tightly on place 2cm rail diameter Print instructions PETG is the best, but PLA works great as well. 0.3mm layer height is just fine.
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A universal radiation shield for various environmental sensors such as temperature, air pressure or humidity. It is recommended to print the radiation shield from PETG or another UV stable material. Print instructions Parts 2x Stainless…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A mount that can hold 360 to 120mm radiators or fans. I needed a mount that could support a 240mm radiator for my GPU and could only find models for 360mm. For 360mm radiators just screw in place and then slide onto the poles of the case.…
Wydruk około 3,05 €–3,73 € nettoWstępna wycena jednego wariantu
Miniature girl for your diorama, architectural miniature or as a figurine. Woman | Girl | Student | Tourist | Architectural figurines | People | Model Girl with long hair wearing jacket, pants with pockets, hiking boots and backpack. She…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
Ich habe für mein Abarth 595 eine Verlängerrung Erstellt, damit Flaschen/Dosen besser halten. Die Verlängerung passt perf Passt für die Fiat 500/Abarth ab bj. 2009-2017 (bis Gen.3) Erstellt habe ich es mit Solid Edge 2024 und stelle hier…
Wydruk około 6,41 €–7,83 € nettoWstępna wycena jednego wariantu
This is my original design for Miniature Over-Ear Headphones , specifically scaled to be the perfect accessory for collectible figures like Labubu, Pop Mart, and other 1/12-scale art toys . The unique print-in-place construction means no…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
I found serious security fault on vans and campervans, which can be found on all type series built from 2006 and on. In the past several years I had been employed as a chauffeur and a garage administrator in the caravan rental company,…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Miniature woman/reader for your diorama, architectural miniature or as a figurine. Woman | Girl | Tourist | Architectural figurines | People | Model | Reader Woman is suitable for 3D models of nature, spring, summer and autumn city or as…
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
This is a phone mount for an NC Miata. It's designed to mount onto the air vent next to the glove box using zip ties. There are three versions, one is a AMPS compliant mounting plate, a 25mm ball joint, and a 17mm ball joint. There are…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
Hello there! Unfortunately, the centralization of Bitcoin mining continues to increase. But Bitcoin is for everyone! Especially for small people like you and me, Bitcoin offers the opportunity to break out of the system and gain financial…
Wydruk około 6,36 €–7,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Scale 1:12 Not authentic, designed from examples of an O'Keefe from the fifties.
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
Old collection of models I made for a stylized smithy workshop: https://sketchfab.com/3d-models/smithy-game-graphics-2015-54ce631950c1403bb33d2d81047a3a78 I've upressed these models and added minor texture detail to the surfaces through…
Wydruk około 6,68 €–8,16 € nettoWstępna wycena jednego wariantu
If you are looking for the complete miniature vise, you are welcome to pick it up here: https://www.printables.com/model/53471 When I had originally released the vise, I was not so profound with printed threads. Therefore the feet for the…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Woman | Girl | Tourist | Architectural figurines | People | Model | Reader Woman is suitable for 3D models of nature, spring, summer and autumn city or as a tourist. Printable for the most common scales (with girl height 175 cm): 1/12…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Miniature girl for your diorama, architectural miniature or as a figurine. Woman | Girl | Student | Tourist | Architectural figurines | People | Model Girl with long hair wearing jacket, pants, hiking boots and backpack. She is suitable…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Miniature accessory | Miniature | Diorama | Miniature Scene | Doll House | Vintage Customize the dimensions for your miniatures. For a more precise print without supports, I recommend printing in two pieces and then gluing them together.…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
This is a roughly 1/10 scale wheelbarrow. I use ¼ inch dowel wood for the handles or you can print them (files included). You will need some CA glue or similar to assemble. Enjoy!
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
A precision tool used by model builders to cut miniature softwood, polystyrene, and other plastic materials. It allows for consistently accurate and duplicate cuts for lengths up to mm. Great for cutting model ship planking, railroad…
Wydruk około 4,79 €–5,86 € nettoWstępna wycena jednego wariantu
I really appreciate the design from deweycat, but it does not fit the SAMLA box I wanted to use. This design also includes a stick to stack the trays without having to put them on top of the miniatures. It is high enough (more than 55mm)…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
I wanted some suitably futuristic bases for the tabletop game Infinity and wasn't happy with anything I could find. So I designed these simple hex bases! 25mm, 40mm, 55mm, 70mm are all included to cover Infinity models. Also 32mm exists…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Simple and sturdy tablet stand with a few variations Tablet Stand - Normal Lip For most iPads and other tablets. (Purple print shown in photos) No supports needed Tablet Stand - Deep Lip For thicker tablets and bulky cases No supports…
Wydruk około 8,21 €–10,03 € nettoWstępna wycena jednego wariantu
Miniature businessman for your diorama, architectural miniature or as a figurine. Man | Businessman | Architectural figurines | People | Person The businessman is suitable for 3D models of city or architectural diorama. Printable for the…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
A mini toy tea set. It has Kettle with lid A jar with lid Milk cup Tea Cup Cup Cake Individual cad files are also attached, feel free to take multiple print outs of Tea Cup to make a set. Plate can be printed easily so didn't attached…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
This is a hook/hanger model designed to fit a popular European radiator model. It was designed for the INCASE DAYPACK backpack. Of course, the hook/holder will work for other backpacks, bags, or any other items you want to hang. In the…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Fiat Ducato Screenwash Funnel Angled to reach the extendable filler tube in the vehicle Print Print upside down Some brim might be good depending on the printer No supports needed Example print eSUN PLA+ - Light Blue
Wydruk około 4,13 €–5,05 € nettoWstępna wycena jednego wariantu
Man | Soldier | Army | Architectural figurines | People Printable for the most common scales (with man height 185 cm): 1/12 scale: 154.2 mm 1/24 scale: 77.1 mm 1/35 scale: 52.9 mm 1/48 scale: 38.5 mm 1/50 scale: 37.0 mm Print with tree…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
I have collected Battletech miniatures for many years now and even though I do not actively play at the moment, I wanted to see my miniatures on display where I could enjoy them. I didn't want to do a basic shelf system…I wanted something…
Wydruk około 4,12 €–5,04 € nettoWstępna wycena jednego wariantu
More miniatures see Collection
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
Slice your books for different color covers and pages as desired or use the included gcode files. Books with pegs for holding and books without pegs are included. Update: Radii added for stress relief on books with pegs and binders for…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
a quick clean wallmounted 2d model of mazda miata na mx-5 for car-guys, if you like this model, id like to see your make, happy printing! (i advise to clean your printbed before so it does not come off, also rise the bed temps up a bit…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Om dat mijn zoon last heeft van de Aziatische hoornaar liet hij mij een Aziatische hoornaars val zien met wat uitleg. Zo ben ik dan begonnen met te tekenen, en printen. De val kan maar begin volgend jaar getest worden. De aanvallen…
Wydruk około 0,77 €–0,95 € nettoWstępna wycena jednego wariantu
Miniature photographer for your diorama, architectural miniature or as a figurine. Man | Photographer | Tourist | Architectural figurines | People The photographer is suitable for 3D models of nature, city or as a tourist. Printable for…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Removable strong hook to hang something on a Vogel & Noot Type 21 two-layer compact radiator . Update 07.03.2020: Added a slightly stronger version V2.0 with rounded edges. I recommend printing this in a material like ASA, ABS or PETG…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
No Amiga A500 was complete without a load of floppy disks scattered over the top ready to play. Therefor I designed a full-scale miniature floppy disk for the A500 Mini along with coloured blank disk labels. The Model is split up into two…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Hello there! Unfortunately, the centralization of Bitcoin mining continues to increase. But Bitcoin is for everyone! Especially for small people like you and me, Bitcoin offers the opportunity to break out of the system and gain financial…
Wydruk około 8,63 €–10,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
cool keychain for your miata ;)
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
Vent keys for all radiators in your house. Classic key and lever key for to use less force. You can easily hide behind a radiator. Odvzdušňovací klíčky pro všechny radiátory v domě. Klasický klíček i pákový, kde není zapotřebí použití…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
More miniatures see Collection Post variations: 90° corner post Post End post
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
Wall Art Silhouette model of the Mazda Miata MX-5 NA Roll bar 1994. Adjustable size. I accept model requests and ideas.
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
The base isn't necessary when the door is kept in a closed position. Dimensions: Height: 16.4cm Width: 8.73cm Depth: 1.465cm Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 5 (for strength). Print-in-Place. No…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Es wird ein Magnet benötigt, wie im Link oder ähnlich.…
Wydruk około 2,11 €–2,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Badminton racquet, 8 cm long. Tear off the support.
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
This is the miniature version of my 3D Printed Krampus Mask. You can find the huge, wearable Mask here: https://www.prusaprinters.org/prints/83489-wearable-3d-printed-krampus-mask This smaller version can be used for decorative items. It…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
A more compact, smaller version of a vice or chuck holder for holding miniatures of various sizes on a paint base.
Wydruk około 5,22 €–6,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Angled speaker stand for Razer Leviathan v2. Desing of the stand goes well with the design of the speker. RGB is not restricted. + 25mm more room for your cables!
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
One of my hobbies is also carpentry, and while designing a real world companion table for our kitchen, this time I decided to create also a scaled down 3D model to see how it looks, and the result was so cute that I decided to share it.…
Wydruk około 2,38 €–2,91 € nettoWstępna wycena jednego wariantu
Designed up this hook beacuse the original one snapped off. The model you see printed in the picture has been printed at draft resolution of 0.25 You can slice it and print it at at higher quality. Supports are needed and you should print…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Suggested print settings (for Prusa machines, others may need some tweaking): Layer height 0.2mm. Infill 15%. Perimeters: 3 No supports are needed but follow the suggested print orientation for ideal results. Assembly Carefully fold both…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
I made this model as a little additional surprise piece for a gift. To print this model, one needs a slicer with a color switch functionality, and of course, two different colors of filaments. Modeled with FreeCAD 0.21.2. Size 125mm x…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
So I wanted to try designing a hook on type buckle that can be used with some straps for easy release. Could be used with Virtual Reality trackers like SlimeVR if your strap fabric fits fine. Quick release waist band? If you find a use…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
I designed this over-radiator hook to store this folding clothes drying rack (from IKEA) when not in use. I live in the UK and think my style/brand of radiator is called “Kermi”. I included the Fusion 360 file, if you need to modify to…
Wydruk około 3,45 €–4,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Revell Dassault Aviation Rafale C Wall Art Silhouette model. Adjustable size. I accept model suggestions
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
A little slime figurine for your tabletop games! Print settings - I recommend ultra-fine with tree supports for this one, and on an SLA printer if you have one. It came out pretty good on an Ender 3 Pro at 22mm tall in PLA (gcode…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Scale 1:12 Not authentic, designed from examples of a SMAG from the fifties.
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
Designed in several parts, this model can be printed without difficulties and with reduced supports. The canopy being designed separately from the main model, it will be easy to print it in a different color. I tried to simplify the 3D…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Suggested print settings: Layer height 0.2mm. Infill 15%. No supports are needed but follow the suggested print orientation for ideal results. Assembly The components fit together using a friction-fit mechanism. Push the base in until you…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
Miniature Votive Stupa , c. 1000s. Eastern India, Bihar. Bronze with inlay of semiprecious stones; overall: 29.2 cm (11 1/2 in.). The Cleveland Museum of Art, John L. Severance Fund 1982.132
Wydruk około 11,13 €–13,61 € nettoWstępna wycena jednego wariantu
This is a small weather shield I created for an outdoor temperature/RH/barometric pressure sensor. Prints without supports (upside down). The mounting is designed to fit a common breakout board style used for the BME 280 sensor, though…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Stand for paper miniature (RPG or any tabletop game)
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted an easy way to keep track of initiative in my role playing game sessions while allowing the players to see when they were about to come up in combat. My solution was to design a widget that accepts a 1 inch wide cardstock tag and…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Stone base | Brick Pedestal | Miniature stand | Display base | Miniature accessory Customize the dimensions for your miniatures. I look forward to seeing your creative setups and photos featuring this base. Have a happy printing time 💛
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
More miniatures see Collection
Wydruk około 1,79 €–2,18 € nettoWstępna wycena jednego wariantu
I found an excellent radiation shield model from @ilMitch_97530 . Unfortunately, I don't use Aqara sensors. So I adapted the original holder for the temperature and humidity sensor TP-Link Tapo T310. It was easy because the author also…
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
This a really quick and fun print to do on your printer, and also it is a great gift. For the best results, print flat with support only for the back of the arrow. Beside that just use your normal print setting. If it is really small…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Fits any barrel <16.2mm OD. Friction fits, elephant's foot will require post processing where barrel mates with muzzle. Reflex sight designed for Nerf mods tactical rails. Here installed on a Nerf Commander elite 2.0 , an economical…
Wydruk około 6,42 €–7,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My wife decided to try and use Diatomaceous Earth to rid our house of some tiny silver fish. The powder is cheap enough on the big A, but the applicator was like $10 USD. Firing up FreeCAD 0.20 was able to design a two part applicator the…
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
Ladder for H0 and other miniatures I printed in Fuzzy Skin, but you can also print it without Fuzzy Skin. Printer settings: Perimeter: 2 Infill: 0% Printing supports: No Fuzzy Skin: Yes, All, 0.5mm
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My wife bought a set of 4 towel hooks for the bathroom radiator, but their grip was awful and every time we picked the towel would grab the hook also and fell on the floor. Pretty noisy in the middle of the night. Also after a few falls…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena jednego wariantu
This is a bracket for a square perforated board (bott perfo branded, sold by bigdug.co.uk) to hold screwdrivers. I have designed variations for: small files (6x against 4 pegs) medium sized screwdrivers (5x against 5 pegs) large…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
This is print is designed to mount a Netatmo Outdoor module and a generic 433MHz cheap temperature sensor on a pole. It also includes two “radiation shields” which protect the sensors from direct sunlight, but allow air to flow through…
Wydruk około 3,01 €–3,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Speaker adapters for a NA Miata. Fits 13cm speakers and was designed for these cheap and decent speakers JVC CS-J520X . In the file the left side is on the left and the right side on the right
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
Ich vbrauchte für unseren Opel Rocks E einen Innenspiegel. Diesen habe ich bei Amazon gefunden. Der originale Halter des Spiegels sagte mir nicht so zu, da man ihn hätte Schrauben oder Kleben müssen. Also einen neuen konstruiert. Infill:…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu
Completely colored the Remix by DarkwingDuck ( @DarkwingDuck_1500428 ) to be printed with a MMU or multitool printer. Open as project in Prusa slicer. I am not the original creator of the model.
Wydruk około 3,61 €–4,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a heating booster for Vogel & Noot Type 21 two-layer compact radiators in widths 132cm and 62cm at 80mm depth. The system works with standard 8cm PC fans (3 pin) which connect the printed segments together. In addition, the…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple alien creature I sculpted for my upcoming tabletop boardgame, Orbital Station 6. Take care removing supports. I normally use a knippers to carefully cut supports AWAY from mini surface to reduce chance to damage surface as I pull…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
After a long time of usage, the plastic parts that hold the side panels on the radiator started to fall apart so I decided to make a simple replacement. I decided not to make the whole thin circle because it would complicate the print.…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
More miniatures see Collection
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
![Radiation Shield for TP-Link Tapo T310 Sensor [Remix] [Update]](https://media.printables.com/media/prints/455919/images/3780277_097a7147-9ad7-4712-9ca0-bcdb72af705a/img_20230423_122418783.jpg)
