Liczymy pasujące modele…
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
OpenFormicaria A Open Source modular ant formicarium and home with simple space saving connectors. Updates/Changelog 2020.11.02 Added 6xGateway More space or broader attachement to other modules! 2020.11.01 Small fixes Added Connector…
At long last, the electric toothbrush has a functional, aesthetic and permanent place in the bathroom- and it's not the sink countertop! The induction charging base, which used to only appear during weekly recharging, nests perfectly in…
Upon seeing the OralB charger holder with Schuko plug, I wanted to make one for my Sonicare toothbrush. I took inspiration from the OralB charger holders and took some “design advice” from the schuko adapter linked as remixes. V1 was the…
Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…
UPDATE : @JesseSchauer_545466 designed an adapter for newer 4100 models - https://www.printables.com/model/924901-sonicare-4100-case-adapter . Give it a try if you have one of those toothbrushes. It's a case for Philips Sonicare electric…
Wanted to do a Star Trek: Picard combadge with stand so here it is. Update May 5 2024 - Widened the gap in the bars to look better. Update December 19 2023 - Redesigned the whole badge to better match the screen prop. Stand base and leg…
I couldn't find any good Helicarrier models online, or at least one for 3D printing, so I made one myself. It's probably only about 80% accurate and fairly low poly, but it looks pretty decent as a small model (although my paint job…
Toothbrush Stand： Electric_toothbrush_holder_single.stl Electric_toothbrush_holder_double.stl Toothbrush wall mount： toothbrush wall mount x1.stl toothbrush wall mount x2.stl Drill two holes on the back of the mount and mounted on the…
My Messor barbarus ant colony was growing very fast, and I was housing them in several small formicaria, so I decided to make an extra large formicarium for them. Once I connected the new nest, they quickly started exploring it and after…
modular ant farm infinite combinations Note - All of the tops may need a bit of sanding to fit right, Tube Adaptors - I may move these at a later time, but for now they are part of this. these are for 3/8 tubing(I said 1/4 inch before, I…
USS Icarus from Stargate Work In progress Not my design, found it here https://www.turbosquid.com/3d-models/free-3ds-model-ship-space-spaceship/892602 I just made it printable. Have to be big (100%) for 0.4 nozzle Didnt print it yet. You…
Here's my attempt to recreate this very detailed phaser. It took some work, but features a neat sliding top that moves the popup sight up and down, removable power cell, and squeezable trigger for that fidgety satisfaction. February 4…
My take on the modular ant farm system, smaller than others because i am growing Lasius niger colony. I used these test tubes: https://s.click.aliexpress.com/e/_Dl55U1N Category: Biology
This was an old design I made like 7 years ago. It got spread around thingiverse for a while so now it's here.
Holder for two Phillips sonic toothbrushes. Without space for charging base. Two-piece design for printing without supports. V3 has been modified so that it is not so rough (smaller polygons). I also slightly changed the connection of the…
Overview This Philips Sonicare toothbrush holder is designed to allow toothbrush insertion from the top or side. This holder allows toothbrushes to be more easily stored higher on walls, far out of reach from splashing sink water, etc.…
Happy Halloween! One of my favorite games as of late has been the RPG Bloodborne. 7 years later, and it still holds up. I love the Gothic atmosphere of the game, the challenging gameplay, and more pertinent to my little hobby here, the…
Id like to be able to expand my nest without any tubes whenever i need to and id like it one day to be very big. Problem is i have a small printer. Well that is why i made this. Small form factor modules that connect to each other. The…
Simple, slim and practical toothbrush holder for Philips Sonicare brush heads. Available with 2,4 or 6 slots to keep your bathroom tidy.
Print, add a piece of waterproof double sided tape, enjoy!
Create a simple key ring for your car or make a gift for a friend Write a comment about which car you would like as a keychain Original model: https://www.thingiverse.com/thing:4720259
Jean Luc Picard Bust. Star Trek.
A perfect way to simply grab Sonicare 4100, plop it into the enclosure and go, no need to remove your brush head! This was styled similar to another remix of the rugged box but due to size requirements and differences in the brush handles…
🐜 Upcycled PET Bottle Formicarium Core Turn a standard 2L soda PET bottle into an interactive, professional-looking Ant Farm (Formicarium)! This 3D-printed nest insert is designed to fit inside a cut 2L Coca-Cola PET bottle, transforming…
Create a simple key ring for your car or make a gift for a friend
This simple stand lets you put your Sonicare toothbrush somewhere to dry and not fall over ;)
It was designed to fit the recreator based on ENDER3 To view the assembly process: Video Working process: !THIS IS BETA MATERIAL! if you test it give your feedback To edit the file in Fusion you have to have this plug-in installed!…
Here is my version of the Confederation of Earth combadge from the alternate reality seen in Star Trek: Picard season 2. Has a removable rank/power cell. Update February 1 2023 - Since the face of the badge is more of a brushed metal and…
A holder for two Sonicare Toothbrushes.
Philips Sonicare toothbrushes (and the cheap third-party look-alikes) come with only a limited set of four colors for their marker rings. So if you're a family of >4 members, you have to invent other means to discern each family members…
Origin: I used the letters from this model to create Name tags as little gifts. I added small holes in the capital letters to screw in a small screw hooks, which can be attached to key rings. Printing: I used a layer height of 0.12mm and…
Note: Build photos coming soon! This replica of the Starfleet Combadge from Star Trek: Picard is the perfect addition to any cosplay armada or combadge collection. This combadge is notable for following the trend of Discovery having…
This is a mini formicarium for a starting colony which is still in the test tube. The connection is for a 14/10mm hose. All you need is some cotton, a 16mm test tube for water and a Pringles lid. The lid fits pretty tight to prevent ants…
A simple travel case for the Philips Sonicare 2100 electric toothbrush. Uses eight 10x3mm magnets.
Original model is by fabbio84 : https://www.thingiverse.com/thing:2922171
15. Mar. 2024 V1.0: First release Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON! So I have started…
Philips Sonicare Toothbrush Holder Toothbrush head holder for two heads made as a charger fixture. Fits Philips Sonicare charger. Simply slide over the top of the charger. Knobs for the toothbrush heads might have to be glued or the stems…
A set of simple bins that designed to hold USB cards, SD memory cards and Micro SD cards. Options Width (1, 2) Depth(1,2,3) In Gridfinity units of 42mm Generated using the Gridfinity Extended OpenSCAD
IFA Multicar logo and emblem in correct size. for one extruder two colors (to 1,8mm white, from 1,8mm black) ironing on Addapted and resized models from Thingiverse: https://www.thingiverse.com/thing:2092314…
On Artstation there's a solid Jack Crusher phaser model by Nick T that I remixed to split up for printing in parts. Update August 23 2025 - The original model size seemed a little too big, so I scaled it down to 92%. The new size feels…
Buscando encontré estas tablas https://cults3d.com/es/modelo-3d/variado/llavero-de-las-tablas-de-multiplicar pero me quedaban demasiado finas. Las he “engordado” un poco y he hecho los botones con las iniciales de los alumnos.
Accesorio cosplay para el pelo de los diarios de la boticaria de Maomao orquilla Jinshi
Modular Formicarium - Ant Farm
Instructions: Attach to wall or cabinet with double-sided tape. Hang toothbrush heads so that they are facing down (this lets any water drip off of the toothbrush instead of running down the stem)
Quick model of the combadge from the CBS All-Access show Star Trek: Picard. This model uses 8x3mm magnets to allow you to pin this badge to clothing. Just print out the model and pop the magnets in! Check out my Amazon Page to see what…
This 'Philips Sonicare 4100 Travel Case' is a remix of the ‘Philips Sonicare Case’ by @Vasilii. Travel case for the Philips Sonicare 4100 newer model toothbrushes, holds 2 brush heads. This version is for the newer models that are shorter…
I've designed this for a scale project of Icarus 280 bus. You can scale it according to your desire. I've pictured the DLP version, but it also prints fine on MK3
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Stand for 2 Philips Sonicare Toothbrushes
Holder for 4 Philips Sonicare toothbrushes, It has space to integrate a charging base in one position. It is mounted to the wall with 2 screws. There are covers that hide the screw heads. Printed in PLA with some supports.
Design Concept A great frame design idea that makes itself visible with the light it receives. Print Settings Creality K1C printer, 0.2mm layer height, 15% infill, PLA material. You can print without any support settings. How To? You can…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Say goodbye to water stains left by your electric toothbrush. You can either mount this with some double sided tape like I did or just let it stand on its own. I liked the simple design idea of this holder by Marc Elbichon but wanted it…
This is the missing travel box for the Philips Sonicare toothbrush head. No more filthy toothbrush heads in your travel bag... I like the slanted design... Let me know when you made one! Print it upright, with no support. It's advisable…
I started my adventure with ants this week, and I loved the idea of Test Tube nest from Wakooshi, so I designed similar nest compatible with OpenFormicaria. Dimensions: Entire Module: 210 x 70 x 20mm Arena Internal: 64 x 41 mm Compatible…
Hi, I made this holder for Philips Sonicare, but can be used for other brands as well (brush neck thickness <7mm). The toothpaste opening is ~37mm. Mount it by gluing using silicone to a tile. I suggest PETG for bathroom conditions, but…
charging stand for the philips sonicare it is bit thighter than the orginal, but has a perfect fit for me. tested with Sonicare 9000 DiamondClean printered here in PLA on structured plate bottom up with organic support of PS 2.6 the…
General I was looking for a nice and c ompact charging station for my Philips Sonicare toothbrush , when the station from 0x4C4A caught my eye. I really (!) like the idea, that the cable is completely hidden from sight and the carger can…
I really wanted a copy of this. I checked the scale, and it looked more like a driver's license than a business card. I compared my thumb to Brent Spinner and figured they were the same size. If you print this at .2mm layer height, I…
Hallo Ameisenjunkie, willkommen zu meinem Projekt, dem Little Formicarium. Angelehnt an mein erstes Projekt gibt es hier ein Formicarium, welches nach Belieben erweitert werden kann. Dies wird durch die modulare Bauart erreicht. Neue…
I was bored to always see my Philips Sonicare brush heads laying down in my cabinet so I decided to design a very simple holder for them.
This is an optional PCB Cover for Icarus 2. It fits the older (short) PCB only that sits in most printers. Some newer printers have a longer (wide) PCB with an extra JST-XH connector, it is not compatible. The cover is of course…
The Sonicare diamondclean toothbrush comes with a “charging glass”, which lets your toothbrush flop around, touching all the nasty germs on the wall, not to mention the germs on other peoples' toothbrushes (yuck!). But that's not a…
Wall Mount for the Sonicare DiamondClean 9000 charging station. It's Designed for the Plastic ring, but it also works with the Glass. Printed with the Bambu Lab X1 Carbon in 0.16mm with 0.4 Nozzle. Using Extrudr Greentec Pro Black PLA.…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
There is an updated remix of this remix... Sonicare Captive Plug Remix This is a remix of @Charleszard Sonicare Wall Mount Charger . I reduced the dimensions of the plug holder to 98% of the original (X and Z dimensions of posted model).…
Here's my version of the rank pips from Picard--still sort of a work in progress until I can get more accurate references. The lighting on the show made it difficult to see the pips clearly, but it appears to me the ‘black’ pips were…
Easy to maintain - embedded magnets allow quick detachment. To attach to surface use either self-adhesive ferrite tape, or a metallic strip. Print is prepared for embedded neodyme magnets 10x15x4mm, gcode will pause at layer 111 to allow…
Philips Sonicare wall mount charger
Die Station wurde in Pla auf dem Prusa MK4S gedruckt. Andere Filamente wie PETG und ABS funktionieren natürlich auch. Die Anti-rutsch Unterlagen sind in TPU gedruckt. Verwendet wurde eine Schichthöhe von 0.25mm, 15% Infill und…
Plasticard Strip Cutter Filament: PLA Layer height: 0.15 mm Infill: 15% Supports under the block and under all nut gaps on the print plate Brim only required around the blade_cover By the way the 5H 48m time quoted above is for all the…
Just a simple ring design to mark individual Philips Sonicare brushes. Quick to print and reusable. Mine have been in use for some weeks now and so far there are no problems or collisions with the rest of the toothbrush. How to install:…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
Una forma didactica de aprender las tablas
This Clip saves your Sonicare electric toothbrush from accidentally switching on. "wtf?" you may ask... While traveling, have you ever packed up your electric Sonicare toothbrush, and found out after arriving at your destination, that you…
Update October 27, 2022 The latest version is now included in the main Icarus 2 package (zip file on top of the page): https://www.printables.com/model/130789-icarus-2-qidi-x-max-x-plus-i-mate-x-maker-carriage July 22, 2022 Version 2.3…
Here's the big PADD from the flashback scenes with Picard and Raffi. Has a changeable display slide. Graphics included as a PDF file. Print at original scale. Display stand included. Buy prints of this model: Ancient Stone Inspirations -…
Remix of Mat3D's model to make it fit 2 toothbrushes, 1 side for Oral B toothbrush and 1 side for Philips Sonicare. In the middle there is place for 3 pieces of toothbrush holders. Printed it PLA or PETG with 20% infill. I did ironing on…
Top and case printed at the same time, single color PLA Basic, no supports, Textured PEI plate. Received a warning from Bambu slicer that indicated an unsupported cantalever which is the clip in the top. Printed without supports and after…
V5 update：Fix the hole，填补孔洞。 修改的 飞利浦电动牙刷支架，两个牙刷座+一个充电支架，可直接粘贴在墙壁上。 Philips Sonicare toothbrush holder Remax：https://www.thingiverse.com/thing:4800201
Here's my version of the Starfleet PADD from the final season of Picard. Features a removable display slide for swapping graphics. Split up the display slide so you can print in any color to save your good filament and has a separate top…
Wallmount for 2x Phillips sonicare Charger with a diameter of ~47mm and 19mm height eg. sonicare 3100. I believe it fits for many sonicare models. 47x19mm You could mount it with double sided tape or with 2 screws.
Here's my version of the holo emitter worn by Elnor and Raffi in Picard seasons 2 and 3. While it is hard to get a clear look at the prop--and there are no reference photos online--I did my best to get it looking close. I had no idea what…
To measure the distance of the toolhead to the mesh for the klipper bed mesh (compensation), you need a probe like an BLTouch which needs to be mounted to the toolhead. I've switched from the original Qidi Extruders to humebeam 's Icarus…
Philips Sonicare Toothbrush Holder Toothbrush head holder for two heads made as a charger fixture. Fits Philips Sonicare charger. Three variants for the cable exit direction: on the left, in the centre and on the right. Simply slide over…
Stojan na: Nabíječku Philips Sonicare - možno s kartáčkem i bez něj Čtyři hlavice ve visící poloze Zubní pastu o průměru víčka do 34mm. Doporučuji tisknout s límcem, minimálně 10% vynucením podpěr, na 2 a více perimetrů, o nejméně 15%-ní…
Charger cup for Philips Sonicare toothbrush as a replacement for the original glass cup. The original glass cup can easily break when dropped. This can be used as a replacement. Print instructions: Needs to be printed with support in the…
Easy to maintain - embedded magnets allow quick detachment. To attach to surface use either self-adhesive ferrite tape, or a metallic strip. Print is prepared for embedded neodyme magnets 10x15x4mm, gcode will pause at layer 111 to allow…
Use good double-sided tape to secure “mount” to the wall, holder part slides into it. Print normally.
Has your Sonicare toothbrush stopped working properly. Does it sound like it's shaking itself apart. If so, repair is simple, with the right tools. Grab yourself a small Phillips screw driver, a couple of hot gun glue sticks (no glue gun…
Clean 3D model for your Philips sonicare. No supports needed.
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
OK, have you ever wondered why Philips Sonicare toothbrushes come only with the same four cheesy "colors" as their marker rings? What about if you are a family of five or more? What about if you want to use a different brush head for each…
Update October 27, 2022 The latest version is now included in the main Icarus 2 package (zip file on top of the page): https://www.printables.com/model/130789-icarus-2-qidi-x-max-x-plus-i-mate-x-maker-carriage Update July 5, 2022 The…
Just a simple holder / station for your teeth hygiene. I made it so I can fit a charger that came with the toothbrush and also two slots for heads of the toothbrush. Nothing special, looks really nice printed with marble filament. I used…
Circuit Paul Ricard, Le Castellet, France, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
