Liczymy pasujące modele…
This Can and Phone Holder is designed to fit a can with a koozie <85mm. The phone holder slot is also 85mm in length and 15mm in width. It fits my Samsung Galaxy A32 with the case perfectly. My print of this variant of the design was done…
Wydruk około 5,50 €–6,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Surfski hecha a base de las formas con las que se construye con madera, en la vida real, y enlazándolos con unos perfiles longitudinales, que sirven para ir dándole volumen, y creando un conjunto más compacto. El objetivo, es crear una…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
I was always losing the keys to my kayak :) So I designed a simple kayak that has a hole on the back for a key ring.
A Lego mini figure can sit in the kayak. The Kayak floats, but there is also a cover to protect it from water splashes. This flips over like a real kayak, nor very stable on the water. Print Settings Printer Brand: Creality Printer: Ender…
English below 🇬🇧 Vytiskněte si vlastní loď! 🚣 Tento 3D tištěný seakajak v životní velikosti měří téměř 5 metrů a je plně funkční se vším co by správný kajak měl mít. Postavili jsme ho z 23 dílů, spojili 225 šrouby a chystáme se s ním na…
Hi! This is Sup board drink can holder i created for my friend which you might enjoy as well! Model is inspired by some video i saw online, but i couldn't find one for my requirements so i made one myself. No supports required
The best can holder! Has a super snug fit and prints really nicely. I made mine out of PLA but I'm sure ASA would be perfect for the UV resistantance. PRINT SETTINGS: -No supports needed -0.2mm Layer height (Not too specific. Really…
Everybody who owns one of these ITIWIT Inflatable Kayaks knows the Pain: Lugging around the Paddles sucks. So i designed a clip to hold it all together nice and tidy. Print with ABS/PET or PLA, at least 3 Perimeters, 35% gyroid infill. It…
2 part model tray and Scotty mount base. Tool holder and bait tray. 5mm screw and lock nuts is what I used but you could glue the halves together as well. No Supports needed, but if your printer doesn't bridge well use them.
This a can holder for your Kayak, there are several options to hold it down using the cargo webbing on your kayak. Either one strap through the middle or using the attachments points as shown in the picture.
This is a holder for the Ketch Karbonate (specifically plastic 26" model ) fishing ruler that attaches to standard kayak accessory tracks (specifically for my Native Watercraft Slayer Propel 10 ). Disclaimers: I cannot guarantee that the…
Little Kayak model. Scale to your preferred size. If anyone has any questions please contact me, THop3D
Kayak Attachments Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No Supports: No Resolution: .100 is what I used. Infill: 65% is what I used. Notes: I made mine out of ABS. Category: Sport & Outdoors
Needed to hang the kayak paddles when not in use. Bracket is made for the handles to snap fit and my be a bit tight for some paddles. Designed in Fusion 360, printed with PETG in Prusa MK3 with .02 nozzle.
Keep all your fishing gear organized in your kayak or boat. Space for Pliers, hooks, lures, traces and more. Should ideally be printed using PETG but I used PLA because I haven't quite mastered PETG settings. I included holes for Bungee…
I needed a way to mount my transom-mounted garmin strike transducer to my new Old Town Sportsman 120 PDL kayak. I found a few designs here that I was able to quickly munge up to make a specific part. I used the profile of the base/mount…
Big shout out to hotbrass for the original design! Remixed this with a center hole to use with the 45 degree adapter for my Kayak. ( https://www.thingiverse.com/thing:4780591 ) Printed in PETG. I did not have flexible filament so I…
I used the original paddle T-Handle on my old paddles but I recently bought some Decathlon itiwit two-part adjustable paddles and needed a male and female.…
I remixed this from a skeg i found on another site, made the skeg taller, and created a bracket that can be glued using rubber cement, so I can remove the skeg for transport and/or storage.
I designed a pliers holder for my kayak and installed it on my kayak. An M6 slot nut and a screw are required for installation
First try at making a fully 3d printed propeller for my kayak with the help of https://www.wageningen-b-series-propeller.com/ No support ofc ;-) Hold together with zip ties The end-goal is a drill powered 3d printed trolling motor for my…
Polar bears are on kayaks. it may need some print supports.
This is a remix of the Inflatable SUP/Kayak Halkey-Roberts Valve inflation adapter posted by lieutenantglorp here: https://www.thingiverse.com/thing:2354966 . It was too small for my hose which is why I remixed it. It should fit most…
Like a number of you, I'm finding that the universal transducer mounting plate is not very universal for the Old Town Kayak. So I'm making my own custom mounting plate for my Garmin Striker transducer. I've got it so that the transducer…
Simple 8" long model of a sit-on-top fishing kayak designed to set on a desk as a decoration. I revised this model so it is closer to being ready to print. I had to remove the milk crate from the previous model as I could not get it to…
This is a track system that is modeled after the yak attack gear track so the screws are on the outside instead of in the track i havent printed it yet but i dont see why it wont work Print instructions Category: Sport & Outdoors
Holder for resting your paddle while kayaking. This version is pretty high-profile, so best for fishing kayaks or similar (not so much for whitewater boats). I printed the holder part in TPU and the base in PETG. The holder and base is a…
A replacement seat clip for the Lifetime Kuna 100 Sit-On-Top Kayak (Model #91054) A more flexible material than PLA is recommended. This part can be printed with PLA (as seen in the provided photos). It will fit and work, but it is a bit…
this is a remix from https://www.thingiverse.com/thing:4667942 the original was not complete by the designer as it was missing files and to download the complete files you would have to purchase it from him. I used the 2 part he included…
First off, big shoutout to Macscott56 for the original! Recently purchased a Crescent Crew Kayak and wanted the accessory rails. I modified the original to print sections to get the overall lengths I needed. If you make it, post it! :)…
Watch holder to be applied via suction cups to the Kayak. Since each boat has its own shape, I inserted various 3D models with different angles to adapt to the attachment surface. The two suction cups are 40mm in diameter and have a M4…
This an izakaya (japanese restaurant). All the food props come from the japanese society called Re-ment(from the izakaya model box) It's a display diorama with with all the furnitures and walls. All models ar glued together. For a full…
Correct dimensions for a Jackson whitewater kayak drain plug prior to 2015-ish when they changed plugs. Yopsolo's plug fits, but is about 3mm too long to bottom out correctly on my kayak. Shortened the threaded portion, filled the center…
Made this to rivet on to the side of my sit-on kayak. Used 3/16 x 1" marine pop rivets. Should work fine with self-tap screws and screw/nut fastening. The print is in PETG to be UV resistant. I don't think you have to use every rivet hole…
Firmly holds your paddle while fishing. Mounts to your kayak with two 4 mm holes. Enjoy :)
This thing is a pedal drive insert for a Hobie style pedal drive kayak (in my case a Lightning Strike) that clamps around a trolling motor shaft. It is designed to fit my MinnKota 30# thrust trolling motor with a roughly 28.6mm diameter…
6in from top of flange to inside of spherical end. Mirror for use on both sides. Print only the flange section to serve as a template for cutting. Installed with silicone and 3/16in long grip blind rivets.…
Hello, I have a Kayak with a paddle 1:10 for Traxxas TRX 4 Defender . A very nice accessory for a 1:10 RC car. The kayak is fully authentic in 1:10 scale. Including oars, it even floats. Good luck with the printing! I used PLA/PETG as the…
Tiny kayak paddles for Lucky 13 / Mini 13. To print Print vertically (as imported) Print with a brim (to avoid tipping over) Print 0.15mm layer height File Selection Print a “mirrored” blade Print either a feathered or a standard blade…
Find 3D-Printed RC cars here.
TinyMtn Free Pack 15 - Ring of Fire This is a package with sets of 3D model files for four symmetric volcanic cones on the Ring of Fire. Mount Agung, 3031 m / 9944 ft Mt. Fuji, 3776 m / 12,388 ft Kronotskaya Sopka, 3528 m / 11,575 ft…
This is a set of seat risers for the Lifetime Teton Pro Angler 116 Kayak. They were designed to fit onto the existing seat mounts for the kayak but may require a little sanding to fit. This is a V1 so it may not be perfect but I have…
Kayak gear track modeled after a scotty track. 45mm wide and 180mm long. 5mm screw holes with countersink. Print upside down with tree supports for the countersinks. i haven't tried without supports but I like to be safe and not have…
Wall mounted rack to hold four blades. Print with the big end on the bed. With my Prusha MK3S I don't need supports. If I print with a 0.6mm nozzle and a 0.4mm layer height it takes a little under 7 hours to print. I used PETg, but really…
Following a user suggestion, here's a simple, fun kayak toy boat for desk display, bath time play, dioramas, etc. This model comes in two variants: A realistic round-bottom version which captures the classic kayak hull shape for a more…
Deck fitting for bungees or deck lines. Use a 4 or 5mm oval head bolt. This one has only one hole for the line. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: .2mm Infill: 10 perimeters to ensure…
Spare part/replacement for water drain plug: Kayak: Prijon T-Canyon (ca. 1995) Possibly also fitting for other Prijon Kayaks. Main Slicing parameters: - Slicing parameters used for Prusamet PETG - 0.2mm layer height - perimeters: 4 -…
Made this to rivet on to the side of my sit-on kayak. Used 3/16 x 1" marine pop rivets. Should work find with self-tap screws and screw/nut fastening. The print is in PETG to be UV resistant. The hold is pretty strong but it definitely…
Print standing, bolt onto the side of the kayak. Didn't have a good photo available when i published this, my kayak isn't stored where i live.
Holder for inReach MINI on the kayak. Attach with one of the cords in front to have it in your reach. Do not forget to secure the inReach MINI to yourself with a cord, the device will come loose if you capsize and end up in the water.…
Replacement drain plug for a Perception Swifty Kayak. 3 pieces 2x TPU and 1x PLA/ABS/PETG The retention Tree can be Hot-glued or adhered to the plug using the adhesive of your choice. Hot glue worked for mine. The washer can be…
UPDATE 2 - Feb 15, 2022 Added photos showing how I used custom supports when slicing. YMMV - You know your printer best. UPDATE Feb 15, 2022 I just learned that the originally uploaded file was in inches. I don't know how that happened! I…
If a padeye on your kayak breaks or is lost then this is can be a useful replacement. In addition to the printed part you will need an eye bolt to screw into the center hole; I used ¼" with 20 threads per inch in this design since that is…
Fins to fit older riot kayaks 1. 2" fin 2. 2.5" Fin 3. 1.5" Knubster 4. 1" Wake fin
Designed some simple kayak paddle drip stops, designed to print in a flexible filament like TPU. The bore is 1.13 inches, which fit my 1.14 inch paddle shaft with a perfect balance of grip and adjustability. Print with low infill for best…
The solution to all your wet kayak adventures: Simple Pelican Kayak plug with 3/8" round hole. Print with TPU preferably with two perimeters and 20% infil. Happy Printing and not Sinking!
A replacement seat clip and hook for Lifetime Kuna 100 Sit-On-Top Kayak (Model #91054) These also fix the problem that some of my clip/hook pairs had where the hook wasn't tight enough to securely keep them together.
10% scale model of a full low backed Whitewater Kayak. Message me if you would like to buy the full size shell design. Category: Hobby
This model is compatible with the lego system.
This is a two part model intended for mounting a Garmin Striker 4 transducer via scupper hole on a kayak. The top and bottom pieces can be attached together using zip ties that go through the provided holes. This makes it a bit more…
The two nuts and coupling are used to assemble the paddle/oar of an Intex kayak. Coupling not compatible with original nut. See original parts:…
print on the back side 20% Cubic perimeters: 4 to 6 Print in PETG or Nylon CF Support: yes
this kayak/canoe outrigger stabilizer pontoon is expandable to whatever segments you like use ¾" pvc pipe in the center hole fill-up the cavity with expandable closed cell foam or flotation foam for buoyancy and glue the segment with…
I designed this model because i just couldn't find the right one to work with my kayak and motor. Would recommend printing in PETG or PETG CF to make sure it can withstand the heat and sun while kayaking. Requires a ball bearing to join…
Make a clean, flush mounting point for deck lines on a sea kayak. Drill two 1/2" holes 3/4" apart in your deck, seal the edges of the holes with epoxy, spread some g-flex epoxy around the tubes and flared section of the fitting, push it…
Latching paddle clips with around a 30mm diameter handle. There are LEGO-style pegs and hollows so a pair (or more) can be attached together to keep them all in the same place for when you go to use them again. Flexible version allows for…
The shock cord fitted to the deck of most kayaks is ideal for storing a paddle or other equipment. But getting these items into place when seated in the kayak is not always easy. A deck ball is the answer. When fitted, it’s way easier to…
Well, better than my previous rudder ( http://www.thingiverse.com/thing:806945 ). Rotating the worm gear both adjusts the rudder angle and also tilts the rudder fore and aft. For normal steering angles (+/-20 degrees) the tilting does not…
top part and tooth would be 100% infill in all situations, handle I printed in 25%. I recommend to print it from PETG, ABS and etc.
I wanted a simple Fish finder mount for my kayak. I have a Perception Outlaw and it as well as other kayaks have the threaded holes for Ram mounts, this uses the holes to mount a Garmin Striker fish finder. I have used this for several…
I wanted to make a stronger pad eye attachment for my cousins kayak, but wanted it to be printed easily. So I came up with this modular design, which allows you to swap between different attachments. I wanted the feet to be printed flat,…
Extends Aqua Marina paddle (29.2 mm in diameter) with 120 mm. Surprisingly strong and friction fit. Print Settings: Printed in PLA 5 walls, 35% grid infill (I used Cura) Brim is needed, no supports are needed I printed this on SV04…
This is a replacement boat plug that has an opening of about ¾" or about 19mm. It has a groove for grommet ¾" OD and 9/16" ID and 3/32" cross section. Since you print it handle down you will get a nice flat seat and may not need the…
Kayak phone holder mount to go in a Scotty fishing pole holder mount. Settings are set for an iPhone 13. Edit parameters in Fusion 360 file to adjust phone size, mount height, and angle. Print rod standing straight up (without supports is…
Attach 1/2" webbing with a single screw
This is a relatively basic rudder model I created to fit the Haswing Protruar Brushless 12v Trolling Motor. This motor is sold under other names as well, so if you have a chinese 12v brushless trolling motor chances are this will fit. The…
Was frustrated for a long time as the mount for our Lifetime Kayak wouldn't hold the seat in place. When at the store yesterday looking at a new Kayak, discovered we were missing a clip. While this clip is not as fancy as the original,…
This fits all the lifetime kayaks. print using TPU and 100 % infill along with 2-3 walls
Unlike my recent windsurf mast holder, I just went with a single screw hole. This should be enough for lightweight paddles (as long as the screw hold is solid). With the trim plug and right choice of screw (or paint), you can make very…
Protects the seam and bottom of the kayak from the ground when loading and unloading. Uses the original bolts that come with the smaller skid plates.
I created this bracket for my Lifetime Teton Pro's rod holders after getting the idea from a fellow kayak owner on a FB group. This is meant to reorient your rods so that they are inline with the kayak rather than sticking out…
This bracket holds the general size of paddle made by Bending Branches (an diameter of 1.2in / 30.5 mm) snuggly. Screw holes are 1/4in. The hold is tight enough to ensure the paddle will no fall out even if held upside down, this was…
These prints can be used with a galvanized 5/16 bolt, nut, and washer to mount a Lowrance transducer in the scupper holes of a Moken 12.5 Kayak. I imagine it could also be easily customized to other kayak makes and models if not used as…
Slips over the ends of the rear seat bar and adds about an inch to the height of the seat in the rear. Should be printed with PETG or another filament that's durable in full sunlight. I used 50% infill and the strength has been fine.
My kayak had no cupholder so I made up a quick design that matches the style of my kayak. Cut a hole in the top of the kayak and secure with bolts with nuts on the end.
This model is used for mounting a kayak paddle horizontally. I created the hook with a fair depth to ensure the drip ring does not interfere in hanging the kayak paddle.
Surf Kayak or Waveski Fin to fit slotted finbox 3" Tall Recommend to print with very high infill and carbon filament. Original version is too wide for most finboxes. v2 fits most Recommended Carbon PETG with high infill %
Here's a quick GoPro mount I knocked up for my kayak. Kayak I have is a Current Designs - Pacific - Breeze model. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 50%…
A tool, in two parts, for unscrewing a broken Padeye from a Hobie kayak. It also works to remove and replace an un-broken padeye, of course. This is my first design and will probably be useful to no-one but myself.
This is a remix of https://www.thingiverse.com/thing:4896995 scaled down for a 1.5lb collapsible claw anchor. I printed mine in PETG for longevity. I have it attached with a printed rail found here https://www.thingiverse.com/thing:4822543
I designed this ship wheel clamp to be mounted on the Kayak to entertain my little daughter. You can easily mount it on any stroller or desk I recommend using a little super glue to mount the handles. Profile latest update: - Added an…
This is a Scupper hole plug to keep water from coming into the sit-on-top kayak from the scupper holes. These are printed in flexible filament to allow for a tight flexible fit. to assemble put the ball into the plug and glue on the grill…
Single hole for 4 or 5mm screw
This is a modification of a Thingiverse project by user Lestat101: Oru Kayak Beach LT paddle holder I found the original design was too long. This version fits perfectly on my kayak with no overhang.
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
This is a plug for the Exo Rexy Kayak ( https://exokayak.com/product/rexy/?lang=en ).
