P
PrintablesHasanen
Underware/Multiboard - Ikea Koppla power strip brackets
Used provided parametric Fusion360 file and created brackets for Ikea's Koppla power strip.
- Pobrania
- 779
- Polubienia
- 79
- Ocena
- 4,6
Wyniki wyszukiwania: kopp
Liczymy pasujące modele…
P
Printablesvolly
IKEA KOPPLA slide- / tail-mount
Print recommendations no support needed print with the smallest side on the bottom for optimal results position the model with the long side in the same direction as the printers base plate is moving while printing Will match to IKEA…
- Pobrania
- 425
- Polubienia
- 61
- Ocena
- 5
P
PrintablesSprabtor
Skadis Koppla Mount
A remix of a Koppla mount for the Ikea Skadis pegboard system. The Koppla power plug extension is slightly raised and angled for the use with the Skadis desk mounting kit. You can find the related M2 T-Nut-System files and more…
- Pobrania
- 368
- Polubienia
- 129
- Ocena
- 5
P
PrintablesSoundDoc
LACK Attack #3: Koppla the Lack (aka Power The Lack Stack)
This is a followup to: Lack Attack#2: LACK Attack #2: Casterate the Lack: https://www.prusaprinters.org/prints/15918-lack-attack-2-casterate-the-lack-aka-roll-the-lack without further adieu.... Attack 3: KOOPLA THE LACK Next thing was to…
- Pobrania
- 362
- Polubienia
- 121
- Ocena
- 4,6
P
PrintablesP S
PowerStrip Holder IKEA KOPPLA for SKADIS
Dimensions had to be adjusted from the original model to fit the Koppla size. Printed at 50% infill in PLA.
- Pobrania
- 301
- Polubienia
- 37
- Ocena
- 5
P
Printableshumansizedmonkey
IKEA KOPPLA power strip holder for SKADIS pegboard
Needs some support for the hooks.
- Pobrania
- 275
- Polubienia
- 46
- Ocena
- 4,5
P
PrintablesNordheim
Ikea Koppla Wall Bracket
I have the CH Version of the powerstrip. See dimensions below
- Pobrania
- 210
- Polubienia
- 38
- Ocena
- 4,75
P
Printablesthnkfrsh
IKEA KOPPLA Holder Remix (Slim) - Wall Bracket for multi socket
Please note that this model is a remix from this design from crashdebug on Thinigverse. As I didn't like the wide setup of the original file I decided to rearrange the position of the holes. Happy printing! Notes: Used "support from built…
- Pobrania
- 201
- Polubienia
- 15
- Ocena
- 5
P
Printablest0b1
Koppla wallmount
Mounting bracket for IKEA KOPPLA power strips. This is a rather trivial remix of @telegnom's Koppla Wallmount (Euro Version): https://www.thingiverse.com/thing:1687838/ Thanks @telegnom for sharing. ☺ Edit: I have added the OpenSCAD file…
- Pobrania
- 194
- Polubienia
- 29
- Ocena
- 5
P
PrintablesCPA3D
Xenon Light connector Renault Laguna 3 538100005R Grandtour sensor Koppelstange
Replacement connector for Renault Laguna 3 Xenon light sensor. This part was broken on my car and I decided to replace it. After replacing the part you need to get the light adjusted. I printed the part in resin and it works flawlessly…
- Pobrania
- 181
- Polubienia
- 15
- Ocena
- 5
P
Printablesyogi_bear
Koppla Powerboard Holder for Ikea Mittzon Desk
This is a remix of Gregor1991s model to provide a frame for the Koppla Powerboard when not using the complete Mittzon desk frame. As the support for the powerboard is built into the desk frame and not the add-on module, if you use the…
- Pobrania
- 170
- Polubienia
- 13
- Ocena
- 5
P
PrintablesBarnyardingan
Ikea Koppla Outlet Power Strip 2 hole straps
Needed 2 two hole straps to mount the Ikea Koppla power strip to the wall. One strap has a cutout for the plug on the end. I've included the fusion file if you need to modify it at all. I used Esun PLA+ as it was already loaded and it…
- Pobrania
- 155
- Polubienia
- 22
- Ocena
- 5
P
PrintablesStefan Nussbaum
Halterung für IKEA KOPPLA Mehrfachsteckdose
Version für CH
- Pobrania
- 150
- Polubienia
- 4
- Ocena
- 0
P
PrintablesNick R
(BW) Lochkoppel zu Molle Adapter
Da ich keinen passenden Adapter gefunden habe, der es möglich macht, Taschen mit dem Lochkoppel-System (der Bundeswehr) an einem Molle-System zu befestigen, habe ich diesen selber konstruiert. Beste Druckausrichtung: Locher müssen ggf.…
- Pobrania
- 147
- Polubienia
- 26
- Ocena
- 0
P
PrintablesBob837
IKEA Koppla powerstrip EU 8 Plug mount (small & fast to print)
It's a smaller and faster print than the original. I just performed a cut through one of the mounts
- Pobrania
- 147
- Polubienia
- 16
- Ocena
- 5
P
PrintablesRaymondKelly
Kopp Paris Frame Rahmen Power Steckdose Schalter 1/2/3
Kopp Paris Frame Rahmen Power Steckdose Schalter 1/2/3 Frame Powersupply or switch 1/2/3 it works great - PLA - Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message.…
- Pobrania
- 137
- Polubienia
- 11
- Ocena
- 0
P
PrintablesFraxinus
IKEA KOPPLA extension cord mount for IKEA SKADIS pegboard
This mount allows you to place your IKEA KOPPLA extension cord anywhere on the SKADIS pegboard without using glue or screws. It is based on an amazing model made by Cunfusu which I found on Thingiverse…
- Pobrania
- 118
- Polubienia
- 32
- Ocena
- 5
P
Printablesdrola
Ikea Koppla 3-way Socket Wall Bracket
This will hold your Ikea Koppla 3-way socket under your desk or on a wall.
- Pobrania
- 111
- Polubienia
- 17
- Ocena
- 5
P
PrintablesJan Pravda
Holder for Ikea Koppla
Printed from PLA, two 4mm screws for mounting to the desk / cabinet Print instructions: 0.2 layer 0.6 nozzle 5 perimeters or 100% infil from 3mm height to the top supports (idealy breakaway with 0 top clearance, top interface pattern…
- Pobrania
- 110
- Polubienia
- 16
- Ocena
- 5
P
PrintablesPavelB
Koppla extension cord holders - remix
Printed in PETG and fits fine, looks durable. This is a remix of https://www.thingiverse.com/thing:4942631
- Pobrania
- 109
- Polubienia
- 12
- Ocena
- 5
P
PrintablesNick R
Molle zu (BW) Lochkoppel Adapter
Da ich keinen passenden Adapter gefunden habe, der es möglich macht, Taschen mit dem Molle-System an einem Lochkoppel-System (der Bundeswehr) zu befestigen, habe ich diesen selber konstruiert.
- Pobrania
- 99
- Polubienia
- 11
- Ocena
- 0
P
PrintablesSuperminaren
Biltema Kopplingdosa Mesh
This is a simple mounting mesh I made for the 110x180x70 Biltema Kopplingsdosa/ Junction Box. Edit: Added more!
- Pobrania
- 97
- Polubienia
- 16
- Ocena
- 5
P
PrintablesAdroN
KTS 95 "Lochkoppel" to Molle adapter
This is an adapter for KTS 95 (Koppeltragesystem 95) also known as "Lochkoppel" or Bundeswehr Beltkit attachment system, to be able tu attach it to Molle panels. This adapter consist on a U shaped piece with 4 holes, it meant to emulate…
- Pobrania
- 92
- Polubienia
- 7
- Ocena
- 0
P
PrintablesNovator
IKEA KOPPLA outlet power clamp holder
I would like to participate in the Clamp-On Items contest. You can adjust bolt and press using OpenSCAD file. Print with 100% infill. Print cap tip with flex filament.
- Pobrania
- 76
- Polubienia
- 22
- Ocena
- 5
P
PrintablesGoliad The Dark
Mount for IKEA KOPPLA multiple plug
This is a simple mount for IKEA KOPPLA or similar shaped multiple plugs. I printed it with 100% infill in Esun PLA+. I recommend hybrid tree support. For the screws I used wood screws 3.5x20 from SPAX but the screw covers shoud fit to any…
- Pobrania
- 70
- Polubienia
- 5
- Ocena
- 5
P
PrintablesPalermo
Ikea Koppla holder (n° 204.120.24)
Holder for Koppla french version (n° 204.120.24) with 2 versions (holes inside and outside)
- Pobrania
- 70
- Polubienia
- 9
- Ocena
- 5
P
PrintablesAlwaysTinkering
Stand to hold the Rose cashbox by masselkopp
Simple stand to hold the roses in place in the vase. They looked ok w/o it, but like a real vase they tended to lean over towards the outside like roses in a real vase. I am include an scad file if you want to fuss with it or size it for…
- Pobrania
- 65
- Polubienia
- 20
- Ocena
- 0
P
PrintablesGoldmond
Optocoupler Relay Enclosure - Optokoppler Relais Gehäuse
This is an enclosure for common optocoupler relays including a snap fit lid
- Pobrania
- 64
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPhil
IKEA KOPPLA multiplug
"Quick and dirty" 3D-Model for desk-planing. Here is the 4-EU-plug version incl. 2-USB 5V slots 13W (total). Category: Household
- Pobrania
- 60
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDanAndersen
Kopp Powerversal PDU - 19 Inch Rackmount ears - Steckdosenleiste Serverrack
Even though the Kopp Powerversal power distribution are completely made of plastic (don't get fooled by the aluminum look), they are made extremely well from the electrical standpoint. Additionally, the power sockets have the right angle.…
- Pobrania
- 58
- Polubienia
- 21
- Ocena
- 0
P
Printablesfelixna
IKEA KOPPLA Power Strip clamping bracket with screws to the top
The power cable for my OctoPi was too short for the power strip laying on the floor, so I needed to mount the power strip below the base plate. Constructed this clamp for the Ikea Koppla power strip so that the mounting screws were going…
- Pobrania
- 57
- Polubienia
- 10
- Ocena
- 5
P
Printablesszz
IKEA KOPPLA (3-way) holder for Underware
Slides onto bottom rail of the socket. Tested with UK version, fits EU too.
- Pobrania
- 53
- Polubienia
- 4
- Ocena
- 5
P
PrintablesDe_Raffi
IKEA KOPPLA Power strip holder (Switzerland and Lichtenstein) (Schweiz und Lichtenstein)
Introducing my personalized IKEA KOPPLA Power Strip Holder – a game-changer for cable chaos in Swiss and Liechtenstein homes! This one's got a twist – I designed it to be 3D printable, attachable with small screws, and it's a breeze to…
- Pobrania
- 51
- Polubienia
- 3
- Ocena
- 0
P
Printableszweir
Ikea Koppla desk mount
Printed with .20mm SPEED profile on my Prusa Mini from Sun PETG
- Pobrania
- 50
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLuka
Ikea Koppla power strip mount to Ikea Lack table leg
Ikea koppla power strip bracket for Lack table leg. (will also fit other 50mm2 table legs). Easy to print, no support. Remixed from: https://www.thingiverse.com/thing:1376701
- Pobrania
- 49
- Polubienia
- 10
- Ocena
- 5
P
Printableslual
Blind cover for Kopp Europa
Clip in Cover for Cover Frame - Switch Range / Series "Europa" from KOPP (width 51mm / corner radius ~3mm) Category: Household
- Pobrania
- 48
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEgor Sklyarov
IKEA KOPPLA 6 EU Mounting Bracket
Each mounting bracket has a 3.5mm hole for screw, two pins matching extension cord casing holes, and holding flaps. Two brackets per extension cord is required. The whole bracket bends to accept the extension cord. I've printed it from…
- Pobrania
- 45
- Polubienia
- 7
- Ocena
- 5
P
PrintablesManfred Morgner
3-Räderkoppelgetriebe
3-Räderkoppelgetriebe mit momentaner Rast Update: 7.5 instead 10mm per layer, better modularized, easier to assemble,, a more stable design. The design now allows for explosion to make export to the slic3r easy. The parameter is…
- Pobrania
- 42
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJeno
009 simple Krauss 0-4-0WT for TU Koppel chassis
Krauss XIVe class style loco for the TU-Koppel A chassis. The boiler is hollow so you can fill it with liquid gravity to increase the pulling power of the little thing. still a work in progress and I'm probably going to make a few more…
- Pobrania
- 39
- Polubienia
- 8
- Ocena
- 0
P
PrintablesNordi
Kopp Paris cover
The cover will be fixed by a M3 screw. Everything can be printed without supports. The theaded insets I found can be found here:…
- Pobrania
- 38
- Polubienia
- 7
- Ocena
- 5
P
PrintablesRCoasterDan
Koppla (EU) mounting for Lack Printer Enclosures
This is a remix of SoundDoc's LACK Attack #3: Koppla the Lack. Beside changing the dimensions for fitting the EU version of Koppla, I've also made a ‘small’ version for those who need a smaller version of the surface mount. Added some…
- Pobrania
- 38
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMaOl
Molly Guard for switch of x-way socket (e.g. IKEA Koppla)
I needed to cover the switch of my Koppla 4-way socket which is right next to the op of my bed... I desingned 2 Verions of the molly guard, for the first you need some support for the hinge (I used a metal paper clip and glue to close the…
- Pobrania
- 37
- Polubienia
- 9
- Ocena
- 5
P
PrintablesWhite Fox 1993
Smart Home Windsensor, Kopplung Shelly Uni und Funkfernbedienung Funkmarkiese/ Smart Home wind sensor, Shelly Uni coupling and radio remote control radio awning
Windsensor Koppler Shelly Plus Uni für Home Deluxe Markise oder andere Funkmarkisen, Mit Aliexpress 0-10V Windsensor Wind sensor coupler Shelly Plus Uni for home Deluxe awning or other wireless awnings, with Aliexpress 0-10V wind sensor…
- Pobrania
- 37
- Polubienia
- 22
- Ocena
- 0
P
PrintablesHerzogCrafts
IKEA Koppla Mount brackets for Table Back
Print laying on the side without support structures. That way the part is the strongest I printed it with 5 Walls and 6 top and bottom layers; 20% infill. To attach it I used 4.5x16 mm Wood screws. You can also use longer ones depending…
- Pobrania
- 35
- Polubienia
- 8
- Ocena
- 5
P
PrintablesPrintyet
Ersatzabdeckung Kopp Europa 3Fach
Kopp Europa 3-fach Abdeckrahmen – Ersatzteil (Arktis-Weiß) Das Problem Der originale Kopp Europa 3-fach Abdeckrahmen ist gebrochen oder gerissen? Im Handel wird er oft nur schwer als Einzelteil angeboten. Die Lösung Dieser 3D-gedruckte…
- Pobrania
- 34
- Polubienia
- 6
- Ocena
- 0
P
PrintablesWerner-Sellschopp
Simson Vogelserie - Entkoppelung Lenkerverkleidung
Die Lenkerverkleidung an meinem Star hat sich immer wieder losgerüttelt und dann geklappert. Also habe ich mal schnell an Freecad gesetzt, und diese Entkoppelung konstruiert. Das funktioniert sehr gut. Nix klappert mehr und nix löst sich.…
- Pobrania
- 34
- Polubienia
- 3
- Ocena
- 0
P
PrintablesEmil Büge
IKEA KOPPLA Powerstrip Holder / Bracket
A wall, or under desk mounting option for your IKEA KOPPLA powerstrip.
- Pobrania
- 33
- Polubienia
- 4
- Ocena
- 5
P
PrintablesShawinkle
Ikea Koppla support
Modifications : Cable tile fixation Cable hole enlarged to 3 cm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: Eryone PETG white
- Pobrania
- 33
- Polubienia
- 11
- Ocena
- 0
P
Printablesbartkodden
IKEA Koppang feet extender
This foot slides over the existing feet of the IKEA Koppang cabinet to allow the cabinet to be used as a small baby changing station. With our new baby on the way we needed to remodel a small home office into a baby room. The room was too…
- Pobrania
- 33
- Polubienia
- 3
- Ocena
- 0
P
PrintablesGreg
IKEA Koppla multiplug holder
Just another holder for IKEA Koppla multiplug (USB version). It is a modified version from Olo Deepdelver's holder, changing the screw brackets to be inline with the multiplug to fit tighter spaces, fix on IKEA 4cm furniture legs, etc.…
- Pobrania
- 33
- Polubienia
- 1
- Ocena
- 0
P
PrintablesM3DDruck
Blindeckel Abdeckung Hue Schalter Kopp Serie Athenis
Dies ist eine Blindabdeckung anstelle der Schaltwippe... @zB für Philips Hue Er wird einfach in den Rahmen geklebt z.b.mit doppelseitigen Klebeband…
- Pobrania
- 33
- Polubienia
- 3
- Ocena
- 5
P
PrintablesJannisJFry
Clamp for IKEA KOPPLA
Here is a clamp to mount the IKEA KOPPLA flush on a IKEA MOSSLANDA. All you need are two M5 screws, two washers and two M5 nuts to secure the koppla to the clamp. I used a jigsaw to cut the shape of the koppla into the mosslanda shelf,…
- Pobrania
- 33
- Polubienia
- 9
- Ocena
- 0
P
PrintablesTinx
IKEA KOPPANG/HEMNES Knob
A replacement handle for IKEA KOPPANG – should also fit HEMNES. In 2025, redid my 2024 model, simplified the design, and added the FreeCAD file. If you like this design, please consider leaving a ♥heart. Thanks! ---------- - Top Fill…
- Pobrania
- 32
- Polubienia
- 7
- Ocena
- 0
P
PrintablesAnthonySimek
Power Strip Holder (IKEA KOPPLA EU)
An adapter to loosly hold the power strip to the bottom a table. 3.80 mm ⌀ hole for a screw. WORK IN PROGRESS Just slide the holder onto the strip and bolt it to the table. Please use at least 2.
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 0
P
PrintablesManfred Morgner
Koppelgetriebe
Experimental Koppelgetriebe. OpenSCAD file supports animation Video at: https://youtu.be/UEW-ie00bvk Category: Engineering
- Pobrania
- 31
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDr. Stefan Lux
Koppla bracket with cutout
added a cutout to allow better reeling up of the cable
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNextGen3D
Window Regulator Coupling for Smart 450 – 3D Printable Model (Fensterheberkopplung für Smart 450)
Beschreibung: Diese Fensterheberkopplung wurde speziell für den Smart Fortwo 450 (Baujahre 1998–2007) entwickelt. Sie dient als Ersatzteil oder Upgrade, um die Mechanik des elektrischen Fensterhebers wieder funktionsfähig zu machen. Das…
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
Printablesrobkrueger
Underware Item-Holder für die IKEA KOPPLA Mehrfachsteckdose 8-fach/Schalter, geerdet weiß, 1.5 m (500.864.02)
Für das fantastische Cable Managment-System “Underware / Underware 2.0” von @HandsOnKatie_827995 habe ich hier mit dem Generator einen Item-Holder für die Steckdosenleiste von IKEA “ KOPPLA Mehrfachsteckdose 8-fach/Schalter, geerdet weiß,…
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLloyd Keays
Wall mount for 3 way socket Ikea KOPPLA
It fits this model - tested on EU . Prints without support. printed at 0.24mm, 2 walls (if smaller, simply make 3 walls, no infill). You place the mount wire side first, then place the KOPPLA in it, place the left or right mount on the…
- Pobrania
- 27
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPetri
Vertical holder for Ikea Koppla powerstrip + USB extension cord
0.2 mm layer height, printed on PETG with supports
- Pobrania
- 26
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPalermo
Ikea Koppla holder (HSW and Multiboard version)
HSW and Multiboard holder for Koppla french version (n° 204.120.24). For the different versions, you need : multiboard : 4 x M3x8mm Hex Socket Cap Screw + 4 x Drop-In Nut Snap - M3 HSW : 4 x M3x8mm Hex Socket Cap Screw + 4 x HSW insert…
- Pobrania
- 26
- Polubienia
- 5
- Ocena
- 0
P
Printablesvvzvlad
Ikea KOPPLA fasteners for beam 30x30
A simple thing to attach an ikea copla (60412017) extension to a 30x30 bed beam. There are ovtersts for two M3 bolts at the top, which can be attached via a fusible sleeve or via a nut on the opposite side. Designed for printing without…
- Pobrania
- 26
- Polubienia
- 5
- Ocena
- 0
P
PrintablesRaymondKelly
Kopp Paris power supply Frame single -> la linea <- Fun
Just for fun I love that italian sketches. For now just the one. There will be more ........ (single) see the double one --> thing:5202832 Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.-…
- Pobrania
- 25
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMacbambi
KOPP Unoversal Plus Halterung
Deutsch unten The Kopp UNOversal® Plus 6-way power strip is one of the best-selling power strips on Amazon. I designed simple mounting brackets for it. https://www.amazon.de/dp/B07B66G3CS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1…
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesErwinDesmond
Koppla rail printready less fillament (remix) of @volly
Just added hex holes to the design by @volly. As i own about 10 of these boys around the house, for every 4 i printed i saved enough filament for 1 extra one. https://www.printables.com/model/315746-ikea-koppla-slide-tail-mount original…
- Pobrania
- 25
- Polubienia
- 6
- Ocena
- 0
P
PrintablesPetr Cach
Skadis/Koppla stand
Just another stand for Ikea Skadis perf board, with the Ikea Koppla extension cord in it. Fits Skadis board width 36cm. You can use the original bolts which cam with Scadis bord to attach the stand. The thread will cut into the plastic…
- Pobrania
- 23
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJeno
009 Genevieve & co. River Class for TU-Koppel A
WARNING THIS THING HAS NOT BEEN TEST PRINTED! Genevieve & co.'s first class of tender locomotive, known as the "River Class" they started out with works no. 12 Draig yr Afon Droellog Welsh for, The Meandering River's Dragon built in 1903…
- Pobrania
- 22
- Polubienia
- 6
- Ocena
- 0
P
PrintablesCornfield9314
![[IKEA] FJÄLLBO / Koppla power strip brackets](https://media.printables.com/media/prints/481fe52a-08f6-4140-8188-cbbbe1fe10ef/images/11507866_a47ecee1-659b-4bf1-adbe-d84c3827a2ff_d9109f15-f29c-4f86-a5a9-d335dc439c08/img_0604.jpg)
[IKEA] FJÄLLBO / Koppla power strip brackets
Combination of two modesl to fit power strip under your Ikea FJÄLLBO
- Pobrania
- 21
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJeno
009 Bagnall for Tu-Koppel
Inspired by the Tipong Colliery Railway's 0-4-0 Bagnall named David (although squished down to fit a TU-Koppel), that is going to return to service this year! To assemble snip the front hook thing off the chassis and glue on the front…
- Pobrania
- 21
- Polubienia
- 5
- Ocena
- 0
P
PrintablesLucrais
Ikea KOPPLA socket holder wall mount
Hello, Sharing an easy and quick to print wall mount for Ikea KOPPLA socket. Dimensions: 59 x 47 x 70mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLunarix
Window Regulator Coupling for Smart 450 – 3D Printable Model (Fensterheberkopplung für Smart 450) (original)
Beschreibung: Diese Fensterheberkopplung wurde speziell für den Smart Fortwo 450 (Baujahre 1998–2007) entwickelt. Sie dient als Ersatzteil oder Upgrade, um die Mechanik des elektrischen Fensterhebers wieder funktionsfähig zu machen. Das…
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
Printablesmortenlj
Koppla case
This is an electronics case designed to fit over the IKEA Koppla single-port USB charger. That variant of the Koppla charger has since been replaced by the Småhagel charger…
- Pobrania
- 18
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGPHerb
Halterung für Blende auf 'Kopp'-Aufputzdose - Bracket for orifice plate on electric surface box
konstruiert mit OpenSCAD für Kopp Schalter Modellreihe ‘Paris’.
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJeno
009 0-4-0 diesel converted from a steam engine for TU-koppel A
"Pride of Bryn Bach" (who was known by everyone as Lynn) Worked on the Bryn Bach Light Railway as their number one until the line flooded in 1902. The line had been built along the water level of the river Bryn, it turns out that large…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
Printablesconnchri
Koppla Angled Desk Mount UK
A quick 'n dirty mount for an Ikea UK plug Koppla 4-way power adapter. I wanted it mounted on my desk, at a 45 degree angle, and couldn't find any on Thingiverse, so I quickly made this. I'm still printing my first one - so it's untested.…
- Pobrania
- 15
- Polubienia
- 7
- Ocena
- 0
P
PrintableszUltra
IKEA Koppla 6x1 Gridfinity Insert
This tray was always quite awkward. Everything slid around in there, not really knowing its place. Since I don't like wasting things, this is not a replacement to the included tray, instead it docks inside and snugly snaps in with little…
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJeno
009 pioneering loco for Tsugawa yokou Koppel A supermini chassis.
reuploaded from my thingiverse account that I am now leaving behind as I migrate onto Printables
- Pobrania
- 14
- Polubienia
- 6
- Ocena
- 0
P
Printablestriplesine
IKEA Koppla - Wall adapter
Made this quick file to be able to fix this extension in place nicely. Works with two screws , I typically use it fixed on my wooden bed frame for some weeks now. Screws of 30mm minimum are required. The diameter I have used is 4mm.
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAniBani
Kopp Rahmen (Athenis)
Geprintet mit Elegoo Neptune 4 Pro. Deeple Pla Pro Filament 0.1 Schichthöhe KEINE Glättung!! (Zeitverschwendung) Passend für Kopp Modell: ATHENIS Zeiten und gramm: 1-Fach: 15minuten 7gramm 2 Fach: 20Minuten 11gramm
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGIVEMHEVN
Roskopp Monster Skateboard Light Box
Bring bold skate culture into your space with this monster skateboard light box. Its vivid green deck, wild illustrated face, orange accents, and detailed truck design create an eye-catching illuminated display. It makes a striking…
- Pobrania
- 13
- Polubienia
- 9
- Ocena
- 0
P
PrintablesHoopy
Skadis holder for 8 socket Kopp POWERversal
The brackets are for mounting an 8-socket Kopp POWERversal power strip to an Ikea Skadis board. Slide the brackets on both sides of the power strip, then screw them on the peg board using these T-nuts . The dimensions of the brackets are…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesESPBoards
IKEA Malm + Koppla - Bedside 3-way Power Strip Holder
An IKEA Koppla power strip 3-way socket holder for IKEA Malm Bed. It allows you to place your IKEA KOPPLA extension cord on the IKEA MALM bed without glue or screws. IKEA Malm Bed (Article number: 904.047.99 ) IKEA Koppla 3-way socket…
- Pobrania
- 11
- Polubienia
- 7
- Ocena
- 0
P
PrintablesRaymondKelly
Kopp Paris Power switch cover double ->la linea<- FUN
Just for fun I love that italian sketches. For now just the one. There will be more ........ (Double) See the single one --> thing:5202818 Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.-…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printables2beers
Sonoff Koppelrelais Case and Clamp
Hallo! Das ist ein Gehäuse für das Koppelrelais des Sonoff. Die Halterung passt auf einen Sonoff Basic. Schrauben wurden M3 x 12mm verwendet. Druck: Nozzle 0.5mm Filament PLA Infill: 20% Category: Electronics
- Pobrania
- 11
- Polubienia
- 3
- Ocena
- 0
P
PrintablesOurkilO
Koppert Cress Set
Print them however you want, nothing needs support!
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJeno
009 Pioneering loco tank engine version for Tsugawa yokou Koppel A supermini chassis
reuploaded from my thingiverse account that I am now leaving behind as I migrate onto Printables
- Pobrania
- 10
- Polubienia
- 3
- Ocena
- 0
P
PrintablesVoxelity
ESSER koppler holder
Esser koppler mounting bracket (Box / DIN Rail) A professional mounting solution for Esser modules. This bracket is designed for versatile installation—either mounted directly into electrical boxes or attached to a DIN rail (using a…
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMikaSchultes
IKEA E1743 tradfri on/off switch old kopp UP Rocker/rotary dimmer plate
This is an adapter plate to mount an IKEA E1743 switch to an old kopp rocker/rotary dimmer if it has been disconnected for the use of smart bulbs.
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesIwan
Ikea Nesstun Koppla Coupling
Wanted better cable management under the bed for easy vacuuming. Made a hanging design for the Ikea Koppla socket. Slides nice and with tight clearance over the Koppla. This one is specifically designed for the Nesstun bed frame. I added…
- Pobrania
- 8
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPrintedCompositions
IKEA KOPPLA extension cord button cover
This is a cover to prevent accidental switching off of devices plugged into KOPPLA extension cords by IKEA for British plugs.
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesStephan
Kopp 9308 mounting bracket
Mounting bracket for a Kopp 9308 power extension. Print Settings Printer: Voron V2 Rafts: No **Supports:** No Resolution: 0.2 **Infill:** 20 Filament: Filament PM ASA Silver Category: Replacement Parts
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTinx
IKEA KOPPANG Spacer
A spacer for KOPPANG dressers. Measure the space between the wooden leg and the floor (see photo). Keep the original pad in place. I provide several thicknesses. Still, you can use FreeCAD to further customize the spacer. If you like this…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printablesdi3go
Esser Koppler Vertical Mount
Vertikalni drzak pro kopplery systemu EPS Esser. Vhodny pro montaz do pozarne odolnych boxu, kde je potreba setrit mistem. Koppler se do drzaku zasouva, pro snadnou manipulaci pri servisu.
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
Printablestoto3D
IKEA KOPPLA power strip mount
It’s fixed to the wall using six pins (up to about 2mm thick), so it’s very sturdy. If you like this design, I’d really appreciate a like and any feedback. Thanks! Print Settings Printer Brand: Creality Printer: Ender 3 S1 PRO Rafts: No…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLukas Rasmusson
Raspberry Pi 4 mount for Biltema kopplingsdosa Artnr. 46-2022 110x180x70mm
a raspberry pi 4 mount for a biltema kopplingsdosa Artnr. 46-2022
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printablesp2baron
Router Template – Flush Trim Jig for IKEA Koppla Power Strip (Desk Mount)
Want to mount your IKEA Koppla power strip flush into your desk for a clean, built-in look? This router template lets you rout the exact opening needed — no guesswork, no sloppy cuts, just a perfect fit every time. This template is split…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFredrik Sällberg
Coupled Window Sash Latch Clip (Koppelhake / Kopplingshake)
Made a new Window Latch (I don't know what it's called in english, Koppelhake / Kopplingshake in swedish) My first "own" model that's not a tutorial! :D Filament: Petg Walls: 4 Infill: 15%
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJeno
TT9 lil Baldwin for TU Koppel A
Based on the Mount Lyell Mining and Railway Company's 0-6-0t Baldwins used on the non Abt sections on the railway. Adapted to an 0-4-0t to fit the TU-Koppel A chassis. Has a hollow boiler to be filled with liquid gravity so it has better…
- Pobrania
- 4
- Polubienia
- 3
- Ocena
- 0
P
Printableseliiasjonssen
springcap (ventilkopp)
the cup that sits above the spring on the hydraulic package.
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0