Wyniki wyszukiwania: mte

StormTerror Genshin Impact.

StormTerror Genshin Impact.

Slimterface, Flipterface & Customface for Bigscreen Beyond

The "Slimterface" is a DIY facial interface for the Bigscreen Beyond VR headset, created by Sporky on the Bigscreen Beyond discord, later modified by Val to be more universal and give more FOV here is why you would want to make your own:…

Paramteric Plant Pot/Vase

My design of a modern plant pot with grooves. The pot is designed to fit a inner pot of max. 13,5 cm diameter and 12cm height. If you need it in a different size you can easily scale it in your slicer. Fully printable in vase-mode. My…

Tomte (Gnome/Santa)

A small gnome with his nose out. Modelled after a gnome found on Åhlens.

Tomte (Gnome/Santa) keychain

I remodeled this gnome to have a hole in it so you can use it as a keychain. I printed it at 80% as that is the size of a normal key. EDIT: added a file with a smaller hole, when scaling the original file the top of the print was too…

Omtech Polar Exhaust Fan Shroud

A simple duct/shroud to guide airflow after removing the stock fan, which if using the inline fan provided only causes an airflow restriction. Bolts into place exactly where the original fan went using the same hardware. I would advise…

OMTech Polar Fixed Riser

This is a fixed height riser for the OMTech Polar. The model is designed as a tapered cylinder with a recess area at the top for the feet to be inset. The riser elevates the machine to the maximum height for engraving cylinders with…

HMTECH 10in Touchscreen case

Case for HMTECH 10" Capacitive Touchscreen I recommend PLA over ABS to avoid issues with warping, especially if using a Prusa MK3S, because the model goes all the way to the edges of the print bed. **In order to make it fit in the print…

Material pin for omtech polar 350

Material hold down pin for lasercutting. Hex size is 7mm to fit the honeycomb that comes with the omtech polar 350

Reverse Alignment Tool for Co2 Laser, Omtech

This is a reverse alignment tool for Co2 laser machines from Omtech. I upload this upon request, but I really encourage that if you can afford to, that you purchase the “real” tool from American Photonics, it even comes calibrated! Please…

QMTech MiSTer FPGA Compact Case

The STLs includes: Case Top, Case Bottom and Buttons. Make sure to print 3 of the buttons. Also, you will want to add supports to the top of the VGA cutout. Please see photos for details. To assemble you will remove the screws from the…

Metals Tech (MTECH) Sparky Solid Model

A model of my career field's mascot, Sparky, from Aircraft Metals Techology.

2 Line laser mount for CO2 laser (Chinese Omtech)

You will need M3 heat set inserts, 2 M3 set screws (grub screws) and 2 line laser modules. I am posting this per request so I am not going to do a step by step but just set up as you see in the photos. Adjust the lasers with the end caps…

Whaaaaatsit? Case (MTester Case)

Spent some time searching for a case for MTester I recieved as a gift and one for my dad but couldn't find any that fit the 91make one I received (there are a couple here on thingiverse), I didn't know at the time searching LCR-T4 instead…

LCR-T4 Part Tester Case (MTester)

In addition to the printed parts, you will need: 4x M3 Screws 4x M3 nuts 2x Small magnet (8x3mm) You may also need some tape to make the tester board a little bit thicker since depending on your printer, the board fit could be a little…

Wall mount for HMTECH 7 inch LCD

Wall mount for HMTECH 7 inch LCD https://www.amazon.com/gp/product/B09MFNLRQQ

KIMTECH WIPE HOLDER

For all my camera homies! I'm no printing pro but it worked for me as two separate parts the door printing flat, the box printing opening up with supports needed for wipe hole (no pun intended) and text. Go wild!

OMTECH / Chinese Laser Triangle Key - REMIX

Remix of Shinobi82's triangle key for OMTech / Chinese Laser engravers. The original was a little thin for where you grab it. I just made it thicker. The original works great so nothing more was needed other than a little more surface…

Chuck Jaw Blanks for Omtech Rotary (K11-80 Chuck)

These are chuck jaw blanks designed for the K11-80 3-jaw chuck included with Omtech’s rotary attachment: https://omtechlaser.com/products/rotary-axis-lra-kp58-00 The blanks are intended as a starting point for users who want to create…

OMTech Polar Adjustable Feet

Flip the screw so the top is face down and put support there, no support anywhere else. 4 external walls. Some sanding may be required. 35mm to 60mm work area for screw.

for mten 4 begode

front and rear dirt protection for mten4

Omtech Polar Honeycomb Locking Wedges

Omtech Polar Honeycomb Locking Wedges Small screws needed to tighten them up.

Kimtech Wipes to Skadis Pegboard

This model holds a Kimwipes KIMTECH Delicate Task Wipes box and mounts to the IKEA Skadis pegboard. Printed in 0.2mm using organic/tree supports.

Kimtech wipe box holder w/ bottle holder

Kimtech wipe box holder w/ bottle holder. Holds regular Kimtech wipe box and a simple alcohol bottle sprayer found on amazon.…

OMTech Polar Manual Focus Block

There are two ways to focus your OMTech Polar: Subtract the width of your material in mm from 17mm, then set a z-axis offset in LightBurn while making sure you home the laser lens before each print - WHAT A PAIN! Install an external Ruida…

Begode MTEN4 EUC Stand

I remixed a popular EUC Stand to be one single unit (Assembly no longer needed) and resized it to fit the Begode Mten4. The wheel doesn't sit perfectly but would stay in place and not tip over when knocked from the side. For best result,…

HMTECH 5'' Raspberry Pi HDMI Screen Case

Case should print easily without supports. I've printed it in PETG with 20% infill and 0.2 layer height. Case has some holes for securing the display to the bottom part. Note that the holes will be printed with some bridge infill that can…

Peglock Tape Measure Holder Paramterized

This Sy's Peglock compatible tape measure holder can be customized to fit your tape measure, open the .3mf file in Fusion and go to Modify > Change Parameters to set the length and width of the tray. The linked 3mf file is a smaller size…

Remix QMtech MiSTer FPGA Compact Case V2 Vents

Remix of Retro Frog's QMtech MiSTer FPGA Compact Case that has ventilation added to sides and bottom for more airflow. Use buttons from Retro Frog's original model. .2 layer height PLA +

Begode Mten4 Headlight Bumper

This is a bumper for the Mten4's headlight. It is designed to allow a fuller range of adjustment on headlight angle, while also providing protection. Tabs that hook over the headlight screws help to prevent the bumper from being ejected…

Dual Business Card Laser Engraving Jig – Fiber & CO₂ Alignment Fixture for xTool, OMTech, Epilog

Dual Business Card Engraving Jig – For Fiber Laser Setups Looking to engrave business cards more efficiently? This dual-position jig is the perfect solution for streamlining your workflow and achieving consistent, professional results.…

BavarianSimTec DDU5 and Control Center combo backplate

If you want to mount the DDU5 on top of the Control Center from BavarianSimTec. Use the spacer to make it flush in front, or skip it if you like the rear to be flush. The photos shows it with spacer installed. All USB-C ports are…

BlackCrow Mten3 stand

The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 Strongly suggest using a strong PLA: Prusa Blend, CC3D Max, Inland Plus. Hardware: two…

Telepromter Build for Frank's 3D Shop Youtube Channel

This is from my Youtube channel video https://youtu.be/GS3796X_zcM about the build of my Teleprompter. When I speak to you in front of the camera now, I am reading a text I have written. It helps me concentrate on other things, body…

Omtech Polar laser Ruida controller shelf

For those using the outboard Ruida controller on the Omtech Polar laser, and who have printed the case for it, this shelf will allow the controller to hang off the side for a better viewing angle. The shelf is two files - the base and the…

OMTech Polar Replacement Lens Cover

UPDATE 2023.12.02 I replaced my nozzle with an aftermarket one, and the sizing is different so the original cover no longer fits correctly. In response, I've modified the design and posted as v2. Version 2 of the cover will work both with…

SLAMTech RPLidar 360 (A1) Case

A case for SLAMTech's RPLidar 360 (A1) that protects the lidar and has room for a raspberry pi zero w. Surprisingly the pi zero w has enough horsepower to process up to 10hz from the lidar while also running hector_slam, telemetry, and a…

Hygromter/Temperature/Voltage Display Case

When I finally assembled my Prusa i3 Mk3, I wanted to design something useful, to test the performance of the printer. Because I already bought some Hygrometers for my filaments, I decided to design a simple case for them. So this is…

GMTEC Fan 120mm AMD Ryzen 9 7940HS

Fan Cover to cool SSD and Ram for: Mini Gaming PC AMD Ryzen 9 7940HS 2TB PCIe4.0 SSD 32GB DDR5 5600 MHz RAM, Desktop Mini Computers Windows 11 pro, Radeon 780M Graphics, 2.5Gbps LAN, HDMI 2.1, 8K USB 4.0…

Begode Mten4 Carrying Lift Handle

This is a rigid, sturdy carrying handle for the Mten4. The briefcase handle that comes with the Mten4 rattles and is noisy while riding. It may be strong enough, but closer inspection was not confidence inspiring, and I wanted to do away…

Hamtenna

This is episode one of “ Will it Ham? ” Having fun with ham radio and showing what is possible.

OMTech Polar rotary tensioner

This is a tensioner for the OMTech Polar stock rotary system, which helps keep tumblers pressed against the rotary wheels and prevents slipping and wandering. Tested with the "small diameter" rotary and an Rtic 20oz tumbler. Parts needed:…

Case for QMTech DE-10 Nano clone board

I tried to make it as clean as possible, printed in two parts only, with a snap-fit lid. It also allows you to use a "regular" 4cm fan instead of the very noisy 1in one that ships with the board! The thermals appear to be fine (around 30C…

Ackerman Steering Geomtery

¡Absolutamente! Aquí tienes algunas opciones para tu maqueta de geometría de Ackermann: Título: Maqueta de Geometría de Ackermann 3D Visualiza el Ackermann: Maqueta Imprimible en 3D Comprende el Ackermann: Modelo Físico Interactivo…

OMTech Triangle Key Knob

This was modeled in two snap-together parts to allow for the insertion of an 8x2mm round magnet to hold the knob in place on the triangle. It's designed to be more or less a friction fit, but there was some variability in the fit on all…

Case for Amiga KMTech mouse joystick switcher

i couldn't find a case for the KMTech Amiga auto mouse and joystick switcher, so i had a go at making my own. this is a fairly basic case that has a pair of light pipes in the lid for the leds that indicate which port is active. there are…

EMTECH ZM-2 ATU Case

A simple case that can be printed in any material, I prefer PLA or TPU, to protect your antenna tuner while traveling, Use your best settings for your preferred material and your printer. Nothing fancy to deal with here, so it is a…

OMTech Polar Front Vent Cover

This is a front vent cover for the OMTech Polar. It helps to keep the “burning smell” down when you're not using the machine by slowing any backdraft that might push air from the machine into the room. It's not a complete solution because…

HMTECH 10.1" LCD Screen Stand-In

A reasonably accurate depiction of the physical form/constraints of the HMTECH 10.1" captivate touch LCD screen. Use this to create your own cases or covers etc.

EMTEC 64G USB Memory Stick Case

No glue requried, just press fit works fine. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Generic PLA black Category: 3D Printing

Omtech laser Z-Axis 1/4 inch adapter

This adapter can be pushed onto the existing Z-Axis knob to raise or lower the bed using a power drill or another tool with a ¼ inch bit holder. The screw to remove the entire knob is left open intentionally.

90Degree 1kg Spool Holder Mtek Re-Mix

Rotating the spool holder is genius and in my 3D printer location allowed for a small over head shelf to be cleared and my printer to be located closed to the wall, saving room and shelf space!

Kimtech & ROR holder for HSW

I find myself using Kimtech Tissues and ROR to clean everything, it works amazingly but never know where to put them. Now that I made the HSW I just had to make the perfect holder for them. I came up with this and am very happy with it.…

3axis joystick 3DOF joystick (OMTER TYXN)

An accurate model of cheap hobby 3D joystick. For mounting use 3mm thick board with 40mm hole in it. (that video is not

Edmond Dantès - Comte de Monte-Cristo Buste

The Count of Monte Cristo – Edmond Dantès - Comte de Monte-Cristo Buste Français Cette interprétation sculpturale d’Edmond Dantès, plus connu sous le nom du Comte de Monte-Cristo, propose une vision noble, intense et intemporelle du…

HMTECH 10.1 inch flush mount bezel

print with bezel facing up, with supports.

OMTech Polar Replacement Button Protector

This is a button protector for the OMTech Polar 350. On occasion when using my Polar, I've accidentally hit the button with my arm, thus interrupting operations. This protector/cover is the perfect solution to prevent that from happening.…

Tamtech 1/24th MG90S Servo Cover

As I want to run my Tamtech 1/24th Ferrari Testarossa, I have removed all the stock electronics and am replacing them with updated kit. The servo I chose to replace the stock version from the '80's was a Turnigy MG90S - cheap, easily…

OMTech 8B69 C02 Laser 900x600 passthrough cover

This is a laser cut pass-through cover fitting for OMTech 60x90cm 8B69 The laser has 2 openings for fitting large pieces, which is quite dangerous. With this cover, you can close the machine and make it save. The cover is mounted with…

Sim Rig - Pedal face plate - Najam Simtec S120

Sim Rig - Pedal face plate - Najam Simtec S120 If you're like me and racing with socks. This pedal face plates give you the all the grip you need, some might call them the "sock eater" ;) Features: Nice grip on your pedals. Mounts to all…

Tamiya Tamtech 1/24 LIPO battery adapter

As original Tamtech batteries are very old and not reliable any more, I have designed an adapter so that you can fit modern LIPO batteries. It is designed for small LIPO batteries like THIS ONE . Two versions, depending where you prefer…

Omtech Polar 350 Front Exhaust System

A front exhaust system for Omtech Polar 350, it further minimizes concinnated air from the front vents. See my blog for details and assembly instruction.

Riddim Rider's Onewheel XR/Pint Rim Saver for 5" hubs 5uperFlux MTE

Scaled down 5" version of Riddim Rider's Onewheel XR/Pint Rim Saver , possibly functionally pointless and mostly intended for stylizing Onewheel/Funwheel/Floatwheel 5" hubs such as Fungineers' 5uperFlux , The Float Life's MTE , or…

Parametric Laser Focus Gauge Block, 0-6mm Heights for Setting cutting and engraving depths - for OMTech K40/K40+, Cloudray, Thunder Laser, Etc.

This is a simple, parametric gauge block to set laser focusing distance for cutting and engraving material on CO2 lasers. It supports material thicknesses from 0mm (for engraving) to 6mm (~¼"), with each height labeled on the block. the…

Begode mten5 Handle Clip (silence the rattle)

The begode mten5 euc trolley handle is loose. When you ride over potholes or bumps, you can hear the handle rattle. You occasionally can have the extended handle come out while riding as well. This is a simple TPU clip that screws into…

Prusa Mk2/Mk3 Bracket for Meanwell LRS350 using AdamTech Inlet

I didn't have the original Delta PSU components to use and I try not to open power supplies, so a replacemnt 5USD AdamTech inlet is a economical choice. Note that the original model is marked Mk3, but I'm pretty sure it is derived from…

3" Exhaust hose adaptor for Omtech K40 laser

Adaptor to fit 3" dryer vent hose to Omtec K40 laser. Probably fits most other K40 lasers. Prints with a very tight fit, will probably need a little sanding to fit, but it'll be tight enough to not need a clamp. The hose will need a clamp…

Emtech ZM-2 ATU Tuner Cover/Stand

This is a basic cover for the Emtech ZM-2 tuner to protect the knobs and switches when in a pack and can also be used as a stand. Depending on the orientation of the cover either 30 or 60 degrees, use a velcro strap or rubber band to hold…

garagepoort opslagruimte, garage door storage space

Om dat ik vond dat er nog zo veel ruimte boven de garagepoort was bedacht ik een klem om rond de rails te plaatsen om zo lichte spullen op te bergen. De afdruk heb ik eerst in kokend water gestoken en dan rond de rails gedrukt, anders…

ParemTech Long Range Wireless PTLevel Corrugated Tank Top Mount

Mount to attach the PtLevel gauging device to a Pioneer Tank corrugated roof. Secured to the roof with 3M VHB. 3mf model is set for solid infill in the 4 corner screw attachment areas. Like the freebie? Please review and share your Make :)

HMTech 10inch Monitor newer version (2025)

USB-C Port offset 4mm

Onewheel Funwheel Rim/Hub Protection for 5" hubs 5uperFlux MTE

Scaled down 5" version of Exit7212 's 6"/6.5" rim protector, possibly functionally pointless and mostly intended for stylizing 5uperFlux and MTE hubs. Untested as of 2/12/26, will be tested upon the 5uperFlux motor's release late…

Temtem #114 - Gazuma

Not my creation, all rights goes to Crema, the creators of the game. My work with this model consisted in importing into blender and creating a random pose.

Mtester transistor tester case with Switch Button and 3 lateral connections

ESR Meter case with Switch Button and 3 lateral connections. Material needed: https://s.click.aliexpress.com/e/_oDXqTVe - 4mm Banana Panel Socket Test Probe (Remove plastics) https://s.click.aliexpress.com/e/_oFWe2t2 - Mini Boat Rocker…

Hygromter Stand

This hygrometer stand provides a sturdy and elegant solution for displaying your hygrometer. Crafted from high-quality materials, it ensures durability and stability. Its sleek design and optimal viewing angle make it perfect for any…

Enzymtest, test tube holder

Support is not necessary. Easy to print. I used a 0.6 nozzle. for your own adjustment is also the f3d. file available. Support ist nicht notwendig. Leicht zu drucken. Ich habe eine 0,6er Nozzel verwendet. zur eigenen anpassung ist auch…

Amtech Clamp Fix

The lower part of the ratchet mechanism cracked preventing the clamp from working. The modelled part follows the same design as the original with a few improvements: • Added chamfers to help spread the load • Walls made wider where the…

ISP-10p-6p AMTEK adapter suite e.g. for Ender3

If you like to update your printer's firmware and it doesn't work via USB port the motherboard doesn't have the bootloader installed. Also if your board just doesn't have enough program space you can upload the firmware directly via ISP…

2.5mm lift block for laser tube Omtech 60w laser

My laser was low and hitting near the bottom of the entry hole for mirror 3, laser and head had not up and down adjustment so I made this to shim up the laser 2.5mm (the amount it was off. I am sharing this since I had requests.

temtem temcard

Remixed version of the full temcard by @AS-3D Druck. I split the card apart in Tinkercad so it could be printed for those of us without multiple extruders or *MU devices. It's not perfect, but it works. Both top tab parts should be…

tomos BT digital speedomter

tomos BT digital speedometer

Kamtec Mini Racer Replacement Body Posts

I Kept Snapping Rear Body Posts When Racing My Kamtec Mini racer. And Figured They Are something That Could Easily Be Replaced With 3D Printing. The Original Screws Are Used For Securing The Posts I Have Tested The Body Posts On The Rear…

Chemtech Wipe & IPA Bottle Holder

Designed to hold your cleaning essentials together for a tidy looking desk. This organizer should fit snug to both your IPA pump bottle and Chemtech box. Designed specifically for: Standard Kimtech wipe box Standard IPA/solvent pump…

Pinecil case big amtech sucker three reels two lid compartments

Case for pinecil solder, 7 tips, three reels, amtech flux and piston, sucker, two compartments with lid and one big

Stöpsel für bestimmte Öffnungen

iPhone mount for Elegato Promter

this is an iPhone 16 Pro Max mount for Elegato Prompter with no case. it fits snug and secure with no light leaks

Lamp Switch Desk Mount Paramteric

A simple file to keep the lamp switch from hanging off the desk. This mount can be modified to fit every lamp and desk. You can use a strip of double-sided tape to attach it to the bottom of your table. Feel free to check out my other…

Plaque Mini-Comtesse

Plaque décorative a poser sur votre Mini-Comtesse.

Campbell planter - paramterized

My design can be found at OnShape I created 3 parameter variables controlling: height : the height of the planter inner : the inside diameter of the can, glass or whatever you use outer : the outside diameter of the can, glass or whatever…

VE7ZAX Mini Emtech ZM-2 ATU clone case.

I love the EmTech ZM-2... I decided to make a mini version of my ZM-2. This case fits all the bits in a compact package. 15W BNC only. This is an exact clone of the ZM-2 but I omitted the balanced antenna ports and switch. Used the ZM-2…

Gemtech Multimount Simple Spanner Wrench

Simple 2-pin Spanner Wrench to take the Gemtech Multimount apart. Category: Sport & Outdoors

QMTech MiSTer Compact Case with mt32-pi cutout

I love Retro Frog's Mister Cases, but they were a little too thick to allow the mt32-pi lite to get a good connection (without sitting at a weird angle). I cut a space out for the add-on board so that it sits flush against the side of the…

Omtech K40+ mA Meter/Laser Power Cover

The laser power knob on my Omtech K40+ can be moved very easily, just by brushing a hand. This is obviously pretty bad for multiple reasons. This cover will fit over the top of the unit (which has "ZYE Laser" on the display) and prevent…

Tamtech 1/24th 2S 450mAh LiPo Sled

As I want to run my Tamtech 1/24th Ferrari Testarossa, I have removed all the stock electronics and am replacing them with updated kit. This sled will fit the Turnigy Nano-Tech 450mAh 2S LiPo (and smaller) batteries - there's a bit of…

Short nozzle for Omtech K40+ CO2 laser

Additionally required parts: 12 mm AR coated ZnSe lens (focal length min. 30 mm, max. 100 mm) Metal washer (OD 16 mm, ID roughly 9 mm) and superglue OR sticky aluminium tape Description: This is a two piece printable focus lens mount…

10 Rack Shelf for AXIOMTEK CAPA311/312 Embedded Board

Made a shelf for the industrial board of AXIOMTEK

4 inch hose adapter for OMTech Polar Lite 55W laser cutter

The OMTech Polar Lite comes with a metal adapter allowing you to connect a 3" hose for fume extraction. However, I'd been using a 4" hose on an older K40 that I was using prior to getting the Polar Lite. The Polar Lite has 4 screws that…

(WIP) Omtech 60W Blue Laser Mirror Replacement Parts

(WIP) – This is a work in progress, modify your laser at your own risk, I take no responsibility for damaged lasers or personal injury. There are known flaws with the system at current which I’ve listed below but it is not an exhaustive…

Slimterface modded for musical performances

Use your bigscreen beyond and a guitar at the same time

OpenPrintTag Formtest

Falls ihr schon vom OpenPrintTag gehört hab, eher nicht vermute ich, da dieser etwas unterging zwischen dem INDX und COREone. In kurz es ist ein Aufkleber mit NFC Tag, damit könnt ihr ein Haufen Infos speichern, aber um zu wissen ob der…