Liczymy pasujące modele…
This is the new field box that is shipped with OF-M4.4 but in a 3D printer friendly version. This version takes advantage of the included magnets to hold the base securely as a lid. The box also includes slots that could be used to secure…
Revision history: 27/01/24 added the STEP files, which may be particularly useful if you want to adjust the slots for the magnets inside the guiding rails. 01/02/24 added an alternative guiding rail version with cutouts for round magnets…
My Omnifixo needed a cool field kit too, but I don't own a TS80P, I own a Pinecil. There's room for improvement, but I'm pleased with it. The plate is best slid on from the side so the magnetic clamp bases don't shoot out and stick to it.…
These dividers takes advantage of the slots in the design of the new Omnifixo M4.4 field box, feel free to make variations that suits your needs.
Modify the Omnifixo design you have on Thingiverse , because the TS80P didn't quite fit. In addition I have designed a reel to contain the solder. The idea is to carry some of the things you need for a solder session out of the workshop.…
I was inspired by the few Omnifixo Pinecil case designs, but wanted a version that would also hold solder and a brass sponge so I had everything I needed to solder on the go. This version will require 4x 10mm ball bearings. These ball…
Tried to max out my Soldering Game. This is a box that fits for the best third hand in the world, called Omnifixo. I was inspired by the Box from Fab Lab Leon, but wanted to take some more stuff with me and therefore designed my own.…
3D model of the Omnifixo clamp and magnet for all your modeling needs.
This is the new field box that is shipped with OF-M4.4 but in a 3D printer friendly version. This version takes advantage of the included magnets to hold the base securely as a lid. The box also includes slots that could be used to secure…
I love my Omnifixo clamps. They are so far the best third hand I have found. But for clamping some objects it would be helpful if the clamps could be on different heights. Sure, you can stack the yellow parts of the clamps, but as there…
Gridfinity, it's a never ending story and being a noob, I tried to whack together something for my soldering tools. The funny thing? I can't solder very good and can't model very good either xD This stacked kit can keep the following…
Base for Omnifixo - Third-hand A 3D printed base for your Omnifixo. An enclosure that allow you to store the “hands” and makes it easier to use on the go! It have been helping me a lot since I am always on the move. There are 2 slots for…
If you are unfamiliar with the Omnifixo, it is by far the best “helping hands” system I have used for soldering. https://omnifixo.com I wanted to create an compact footprint Omnifixo case that was also compatible with Gridfinity. The…
Tištěno z PLA+ Mladeč, magnety 10x3mm od Unimagnet.
A tray for the Omnifixo M4.4 fieldbox to allow it to be removed with content and use Omnifixo vertically. Two versions are included: one with the layout of the original divider and one with larger compartments. Update: Added two versions…
a modification to Tim Malmgren's Omnifixo base that uses 6x2mm (gridfinity) magnets
Insert that fits into the deep part of the Rugged Pinecil XXL Case . It features mounts for a USB PD 65W 20Ah Battery from baseus and an Omnifixo. Model Link:…
This is a remixed version of the original OMNIFIXO field box that can be found here: https://www.thingiverse.com/thing:5436769 I have edited the internal layout to fit a few more items and also redesigned the soldering stand to allow for…
Closed bottom tray for the Omnifixo M4.4 injection molded field box. The current M4.4 comes with an injection molded (IM) field box. I first tried the closed bottom tray remix created by @PjotrStrog, but it did not fit the IM box (his…
I love the case PosterBored made, but when I went to use it for the first time I realized I really needed a brass sponge, and would like an extra tip available on the go. I also wanted a larger hole to put my solder roll in. So I've added…
I loved the original design but didn't like how hard it was to grab the magnetic feet and helping hands from the bottom of the case. The design also limited use of that area for other things. This redesign attempts to fix that problem.…
This is pretty much for my own use, but I figured people might also have the same soldering iron & omnifixo combo and want to easily carry some basic stuff with them. I set the compartments this way to be able to store extra soldering…
20-Apr-2024 Update V1.0.1, read the ChangeLog file for more details KeyBase, the Omnifixo replacement you were looking for ? Looking for accessories for your KeyBase ? Check my official collection where I will add any model I find for it…
Revamped version of Mike Pensingers Omnifixo Storage Box
A simple bin to hold your Omnifixo vertically. The bin has holese for 6x2mm magnets (press fit). Fusion 360 file included.
Fluff Do you like how Omnifixo snaps together into its own case? I do too, so feeling absolutely love-struck by that thing I tried to create a storage box for soldering utilities that works on the same principle. With serious snapping,…
Simple Case for Omnifixo https://omnifixo.com/ You need only 2 round Neodym Magnets 12x 3 And 4 silicone adhesive pads or you print your own TPU feets and glue it. I printed in Devil Design Blue with 0.4 Nozzle and 0.2 layer heigh on…
Used Walter's SCAD (Thingiverse) parametric model to build this Omnifixo case or box. Remodelled the lid with emblem of Omnifixo (graphics copy, then traced in CorelDraw!, exported as SVG and imported in TinkerCad. Eventually redrew all…
Hello, This is my plate for Omnifixo, where you can storage yours other Gridfinity bins on top while working, like Soldering Tin, Solder Iron or other! It's 2x5 Grid on top. For Soldering Tin and Solder Iron holder check out my other…
Stores and organizes: Pinecil soldering iron 6 Pinecil soldering tips (short Omnifixo third hand tool (held in place by magnets) PinePower 65w USBC power supply USB-C to USB-C power cord Solder in a tube Desoldering braid in a standard…
I made a large version of the Omnifixo case because the original feels very fragile and removing magnets is kinda pain for me. It's nice to have a case where every part has it place and looks tidy, but I don't have the nerves to remove…
This is a simple base / box to organize an Omnifixo OF-M4 plate and its 4 OF-C1 clamps. The model can be modified to accommodate different sizes of magnets and even the OF-S2 plate. The STL and GCode files are made to accept 8x3mm magnets…
I got the Omnifixo Helping Hands system and needed a box to store it. Most others also had storage for a soldering iron that i did not need. Uses 4 10x3 magnets Amazon.com: TRYMAG Small Refrigerator Magnets, 50Pcs Rare Earth Magnets,…
The MHP50 is not tall enough for omnifixo's clamp to stay flat. If you use Omnifixo clamps without the base, the boards are slightly tilted causing uneven heating or sometimes, no heating. This base fixes that issue. The base has indents…
Simple two-hook system for mounting your Omnifixo OF-M4 third hand set on IKEA SKADIS pegboard.
I just mixed up Tylers brilliant model to accept 10x6mm (or two 10x3mm) magnets instead of ball bearings. It was just easier for me because i was having a problem finding just a couple of ball bearings (who wants to buy 50, right?). All…
In my earlier created Omnifixo box the neodyms attached to everything in the box that it was hard to control them. Always one or two guys were driving me nuts. So I developed a little add on, a clamp for two Neodyms (convenient to…
Kept the small tab with the hole to facilitate the soldering stand. The version in the pictures is printed with Fiberlogy Impact PLA – Black on a Bambu Lab A1.
Printed in PLA with 0.2 layer height and 0.4mm nozzle. No supports needed.
Remix of Tylers brilliant model for a Omnifixo plus Pinecil case to hold the Pinecil mini-stand with sponge.
Eine maßgeschneiderte Halterung für deinen Omnifixo OF-M4. Sie wird mit einem Magneten versehen, der eine sichere Befestigung an der Rückseite der Metallplatte des Omnifixo gewährleistet. Mit diesem praktischen Feature kannst du dein…
Travel box for the Omnifixo third hand, based on the original with my own modifications.
This remix features slightly more ergonomic cutouts to make it easier to access
I waned to tweak the layout of this existing omnifixo case. Ultimately my modification still didn't get the case to hold all the components I wanted. Figured some one might like this layout so I am still sharing it! I made the…
First, thanks to the creator of the original model for coming here to look at this print. Second thanks to the improved version creator. Did not print one of them, but added slightly improved ones I thought I needed. The first change I…
This box for your Omnifixo "3rd Hand" has a magnetic closure and space for the clamps to be stored. But, rather than let the clamps rattle around inside, I mounted clevis pins (3"long, ¼"diameter) inside. The pins don't do anything more…
Burger Beagle's Omnifixo case is outstanding, but as cool as dedicated spots are for things, I often find myself wishing for a denser storage solution. Some people say I'm a pack rat... With this remix, I took one of the coolest parts of…
Fits v4.1 of the OmniFixo clips which are slighly bigger than the more recent versions.
At the request of a Redditor, I added 6mm x 2mm magnet holes to the top of the original model.
This is a container for a portable soldering station using the Omnifixo 3rd hand and the Fanttik soldering iron. I've included a plain version for just the soldering iron as well as a slim and thicker version if you're using the Omnifixo…
Wall Control Mount - This will hold the "OmniFixo" soldering jig. You will need some M3 button head screws to mount it. Screws can be added from the back to make the “hook” portion that secures the unit to the wall. Optionally you can add…
A basic template that allow you to create your own omnifixo gridfinity storage solution. OnShape link: https://cad.onshape.com/documents/8faf36d0265d7c11b8575733/w/f92b2f9ac7b0c90d2896e60b/e/385407b5259cff59fadf6512 I have since printed…
Since none of the Omnifixo cases on printables seems to fit the TS80P soldering iron, I designed one. It would probably also work for the Pinecil, TS80, or TS100 soldering irons, but I haven't tested it. Otherwise it also holds the power…
The magnetic holding strength is significantly weaker than using the stock bases as standoffs. I recommend using a stock base for the top and bottom of your stacks.
Since I don't own a Pinecil, but otherwise liked the Omnifixo Pinecil Case design by @PosterBored a lot, I replaced the Pinecil compartment with a generic compartment. I also had different magnets on hand (5x3 cylindrical), and I prefer…
The modified Omnifixo field box by Xkonti is a very nice printability improvement to the original case. But the case is still aimed for carrying with you. Since my Omnifixo mostly just stays at my desk and I want it out of the way when…
Printed in PLA with 2 walls and 10% infill. Uses 2 universal pegs for mounting.
- Using 4x 8mm x 2mm magnets on the base for the clips to be held. - Using 8x 8mm x 2mm magnets to hold the plate when stored.
It is printed with PLA in default settings with supports in 0.2mm height. Edit 2025-09-09: I added version 2, where was reworked models for screw drivers, tweezers and screw case and was added model for SpeedyBee adapter and flux. This…
Better internal space as compared to my first model.
The Omnifixo is attached under the desk using double-sided adhesive tape. Once in place, it can be easily slid in and out as needed. This provides a simple and space-saving way to keep it accessible without taking up extra desk space.
Levná DIY sonda k PCBite nebo Omnifixo / A cheap DIY probe for PCBite or Omnifixo English version below. Článek o testovací sondě můžete najít u mě na webu https://chiptron.cz/articles.php?article_id=344 Navrhl jsem levnou DIY sondu,…
I would advice to print with brim as you can see ears tends to warp.
I build a plate to hold 2 OMNIFIXO OF - S2 this was because the OF -M4 model wasn't available. fits perfectly just an press fit.
Get omnifixo at https://omnifixo.com/ Simple base for my omnifixo M4.4, with some storage space for my Xiaomi Electric Screwdriver and its bits set. The omnifixo is held in place by round 5x2 mm magnets. There's also space in the base for…
A pegboard holder for your Omnifixo M4. The pegboard hooks have a two-inch pitch. This model is easy to print on its base, with basic supports enabled for the three hooks. I printed it with Polymaker PolyTerra Marble White PLA at 0.2…
I printed this upside down with organic supports.
A box with a tray for the OMNIFIXO and pinecil, easy customizable. It uses the OMNIFIXO as the lid and it's secured by their own magnets. Perfect for travel.
I now have a Omnifixo M4 kit, which I love, but my electronics carry kit bag isn't big enough to hold them, so I took the attached original model, cut out the parts that held the Omnifixo parts and then mirrored and mapped them into my…
This is a box to create a fully portable, small soldering kit based on the Omnifixo Helping Hands . The box uses the Omnifixo magnets for securely holding the box shut - no additional magnets or hardware needed. Each magnet (with clamp…
Holds many things :D. My example is printed in PLA with 3 walls
This is a custom storage box for the OMNIFIXO M4 designed to keep the lid, holders, and essential soldering accessories organized in one compact place. The design features an integrated holder for the Miniware TS101 soldering iron,…
The case uses the following materials: fixpoint solder (45mm diameter, 27mm height) M4 soldering tip: https://www.amazon.de/dp/B00W7QDUHK chipquick flux: https://www.amazon.de/dp/B00HKJTJ6U I made it to fit my Modifi3d Pro Tool and used…
This divider allows for 10 storage compartments inside the Omnifixo M4.4 kit. We have integrated this solution into our solder training program at Artisan Electronics and the Makers Third Hand is a great addition. Thanks Omnifixo!…
It's a gridfinity case. It holds a pinecil, omnifixo, and everything you need for soldering. There's also spaces for magnets, but you don't need them really, because the yellow magnets hold them in place Here's the thing: The clearance…
If something happened to your plastic magnet covers (or you didn't have them at all 😉), you can print this ones. Are they stackable one above other? – Yes Does upside down feature through 'ring" works? – Yes Depending on your printer you…
I use this to store in a drawer, but could be used on a wall as well. Intended to be used with this click rim and this multibin
A small and simple holder to hang an Omnifixo board on a Skadis board. A very simple model but it does not look bulky. I printed it in PETG, but PLA should work fine, too. Of course, you have to print the part twice to hold the board.…
A mount for the great Omnifixo set for the Ikea Skadis board. There were already a few of these out there, but space is at a premium for me. I designed this one so it mounts the Omnifixo board perpendicular to the Skadis. This means it…
I have printed Omnifixo - Pinecil box for myself and because I don't have any short tips for Pinecil, I wanted to make the space for them useful for solder. But I just didn't want to throw it in there, so I made this solder holder/coil to…
Improved clamps for greater stability and a secure fit - use with 8x8mm round magnet
BOM ball with m6 threaded hole magnet for said ball metal plate for platform (or use a weighted base, which takes 12 nickels) a 30mm long spring with inner diameter > 6mm (or you can print the tpu spring. (adaptive layer height max…
Solder spool for the Omnifixo / Pinecil holder. Addon for the Omnifixo + Pinecil 3D printed case. Print with Tree (slim) on build plate only supports, threshold 20, PLA / PETG / ABS recommended.
I was originally tossing up between the original Omnifix Pinecil case & the Plus remix and in the end, I went with the original. After printing & attempting to use I found myself in the same position that people in the comments did - the…
HS-02 is longer than the plate of Omnifixo so I had to make a custom case. It requires 2x5mm magnets. It holds HS-02, pincet, roll of soder, 2-3 helping hands, uses stock omnifixo magnets to keep it closed.
Fits v4.1 of the OmniFixo clips which are slighly bigger than the more recent versions.
A box with a tray for the OMNIFIXO and pinecil, easy customizable. It uses the OMNIFIXO as the lid and it's secured by their own magnets. Perfect for travel.
If something happened to your plastic magnet covers (or you didn't have them at all 😉), you can print this ones. Are they stackable one above other? – Yes Does upside down feature through 'ring" works? – Yes Depending on your printer you…
This is a box to create a fully portable, small soldering kit based on the Omnifixo Helping Hands . The box uses the Omnifixo magnets for securely holding the box shut - no additional magnets or hardware needed. Each magnet (with clamp…
The MHP50 is not tall enough for omnifixo's clamp to stay flat. If you use Omnifixo clamps without the base, the boards are slightly tilted causing uneven heating or sometimes, no heating. This base fixes that issue. The base has indents…
