2825 modeli
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tool for make corner radius with router inside table. If you need any other size, just send request I will make it. Changelog: 05/15/2022 - Added 17.5mm version (requested) 07/22/2023 - Added 70mm and 80mm version (requested) Print…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
When I design the Ultimate router jig, ( https://www.printables.com/model/847294-ultimate-router-jig) , I was not able to find a trim router base wich can be easiliy printable without support. For this reason I decided to design my own…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 489742 two #6-32 x ½'' machine screws To install: Mark which plugit adapter cable replace the black/white cable Remove the cable, strain…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a router track sled so you can guide a router in a straight line following a track saw track. This has been designed to work with the Dewalt track and a Erbauer router. I have printed all components with PETG the components are…
Wydruk około 4,72 €–5,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a screwable or gluable wall mount for mobile LTE / 5G wifi hotspots / access points with an additional slot for the battery. Features: charging slot in the middle on the bottom display is visible (turn device around if you don't…
Wydruk około 4,89 €–5,98 € nettoWstępna wycena jednego wariantu
Bracket for mounting a Starlink Gen 3 router
Wydruk około 3,32 €–4,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can either print as 2 separate parts with 1 very small support on the part that goes over the track, or print as 1 part. The 1 part will take more support and more time, is also not printed in the strongest orientation. For 2 parts…
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
Outer Wilds Patch Patch-logo from the video game Outer Wilds Printed at .1mm layer height, ironing, with color change at each top layer You may have better results with a smaller nozzle .3mf/.stl included Prusa MK3S .gcode included
Wydruk około 2,59 €–3,16 € nettoWstępna wycena jednego wariantu
This is a remix of the radius finders created by victornpb with inset numbers instead of raised.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Raiser / stand for MikroTik RB5009UG+S+IN and RB5009UPr+S+IN POE IN/OUT (thank you @Omni_RF for testing) router. With the stand the ground clearance is 24mm. Thus, you can route your network cables underneath the device and also help to…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
For sorting the milling cutters, drills and bits according to the principle of a French cleat. Updated version of my first draft (817506-milling-cutter-and-bit-french-cleat) Also suitable for this system are my extensions for thread…
Wydruk około 0,59 €–0,73 € nettoWstępna wycena jednego wariantu
Introduction This is a set of jigs that you can use to route the stepped mortices to install your SOSS invisible hinges. There are model files for every standard type of the SOSS hinge. They come in two flavours, depending on the…
Wydruk około 4,90 €–5,99 € nettoWstępna wycena jednego wariantu
Very minor supports built into the adapter. (see red in below image). This adapter is designed for the tapered suction end of my central vacuum hose. Connection diameters are as per the following image. 0.2mm layer height 0.4mm nozzle PLA…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
4mm base with 0.8mm lettering sticking out Strong keychain i Put 100% infill for better strength
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
For everyone like me who's new to working from home, this is great for keeping my phone nearby, visible, and taking up a minimal footprint on my tiny workspace. I'm quite proud of this design. I'm leveraging the fast print speed of vase…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
Add a charm to your keys!
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
This set includes five different sizes of bushings that fit the Milwaukee trim router's large base. They push in and stay securely. There is a 3/8, ½, 5/8, ¾ and 1" bushing to accommodate different sized bits. There is also a baseplate…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Tollerance tester: Inner Outer Height Bottom layer Top layer ... ALL dimensions are 10mm !!!
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
This is a router base that matches Milwaukee base 2723
Wydruk około 7,68 €–9,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A carriage for the laser module for the Sainsmart Genmitsu 3018 CNC router. Slides on to the front of the motor bracket and tightens against it. Includes air-assist conduit. I use a board on the bed that extends at the front by 40mm to…
Wydruk około 4,67 €–5,70 € nettoWstępna wycena jednego wariantu
I remixed these from topxnbo on thingiverse to be the same thickness for the bar as the depth guides. I also added an easy angle gauge to each bar. 1/8" - 90° angle gauge 3/16" - 85° 1/4"- 80° 5/16" - 70° 3/8" - 60° 7/16" - 45° 1/2" - 30°
Wydruk około 8,61 €–10,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Baseplate for Makita RT0700 Router. Drill for Hafele Rafix connectors.
Wydruk około 4,84 €–5,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is especially designed for Tropicana © juice bottles and allows you to recycle them into a good size watering can for your seedlings or indoor plants. The whole thing can be printed in PLA, but for a better seal, I recommend…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Off-Duty in the Outer Rim Collection : R2-Homebrew. A first in a series of bas-reliefs that give us a glimps into the lesser know pastimes of the cast and creatures of starwars. It is widley believed that R2 began this hobby after…
Wydruk około 10,71 €–13,10 € nettoWstępna wycena jednego wariantu
This case fits the following combination of parts: Raspberry Pi Compute Module 4 IoT Router Carrier Board Mini (https://www.dfrobot.com/product-2242.html) Waveshare 19623 CM4-HEATSINK Raspberry Pi Compute Module 4 Four 15x2.5mm standoffs…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Off-Duty in the Outer Rim Collection: Vaders “Sith Squash and Vine” a Gourd Hobby Farm. The getaway from Mustifar is a remote swamp island on Felucia. Vader grows his crafts gourds here and is well known for the quality of birdhouse gourds.
Wydruk około 10,78 €–13,17 € nettoWstępna wycena jednego wariantu
Small 240x125mm shelf for a router or modem that can be hung on a 19mm wide ledge. You'll need 4x M3 square nuts and 4x M3x8 or 4x M3x10 screws ; grab them from the printer's spare bag if you still have it. Installation: Put the nuts into…
Wydruk około 3,33 €–4,07 € nettoWstępna wycena jednego wariantu
Disclaimer: I started this project a long time ago and learned a lot about modelling in the meantime. This means that the model isnt as well done as other newer ones, but i still wanted to publish it, in case someone else would like to…
Wydruk około 6,16 €–7,53 € nettoWstępna wycena jednego wariantu
Made a New version of the my Route 66 keychain to a small and similar stile of my keychains. OLD Route 66 Keychain download⬇ https://www.printables.com/model/486649-route-66-keychain 4mm base with 0.8mm lettering sticking out Strong…
Wydruk około 0,36 €–0,45 € nettoWstępna wycena jednego wariantu
(pour le français, voir plus bas) Fully Printable V2 Balisong Butterfly Knife with M3 and M4 nut holes. Please go to the original projet to download the blade. You can use 2 M3x10 and M4x10 screws. Settings Nozzle : 4mm Resolution : 0.1mm…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
A simple vertical stand for a TP-Link Omada ER7206 Router that provides stability and airflow into the vents on the end (now down) side of the router. Prints upside down without supports. The space for the router measures 35mm x 130mm and…
Wydruk około 2,40 €–2,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this enclosure to mount it to my MechaPlus ProBasic 06-05 CNC Router . But it can be used for any CNC Machine. I deliberately left out the Stepper drivers which are in a separate enclosure that came with the machine. It is…
Wydruk około 7,72 €–9,44 € nettoWstępna wycena jednego wariantu
Needed to deepen the subwoofer in to the front of the speaker box so i made a guide for the router. you need a 5mm bolt and a 5mm drill the routerbit is 12mm wide
Wydruk około 4,74 €–5,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recently had to update my router and decided on a mesh system. I needed one node in my garage, but didn't want it low where it could get damaged, so I designed a mount to be able to mount it to the roof. The router/node fits inside the…
Wydruk około 4,27 €–5,22 € nettoWstępna wycena jednego wariantu
Podlahova lista - vnejsi spojovaci roh Floor sheet outer connecting corner Print instructions Print vertically with support on the bed
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
Náhradní ručka namísto originálních, které nic nevydrží, modelováno na zápustný šroub, ale může se dát i normální. Tisknte alespoň 5-6 perimetrů aby to drželo.
Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu
This is a remix combining the router side of the OF900 Router Vacuum adapter for 35 mm by Jonas Lang and the vacuum hose side of the festool cleantex 36mm adapter v2 by Gawel C. Both the router side and the cleantec side have bumps for…
Wydruk około 2,32 €–2,83 € nettoWstępna wycena jednego wariantu
A simple corner shelf designed for the Century Link "C4000BZ" Router. Features a pass-through in the back for easy wire management and indented circle to keep the router centered. Fastened to wall using four #8 Screws (drywall anchors…
Wydruk około 9,86 €–12,05 € nettoWstępna wycena jednego wariantu
This adds a thread to the Idler Body as one of the other metal pin kept moving to the outer side, blocking the mmu3 sometimes. Recommended Print settings: 0.20mm Structural, 0.4mm nozzle size Organic support on build plate only Use a M3…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pti couteau de poche (JOUET)
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
4mm base with 0.8mm lettering sticking out Strong keychain i Put 100% infill for better strength
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Egy tartóelem az általában panelházakban megtalálható DIGi által adott Huawei routerekhez.
Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu
I made this wall holder for my Bosch GFK600 router, so that it goes on the wall in my shop, when I'm not using it. It prints like this: - Place bottom down - Infill 50 - Support everywhere Gcode for this setting is provided, and the…
Wydruk około 12,01 €–14,68 € nettoWstępna wycena jednego wariantu
Instructions: Best way to print is with the thread facing down You'll need support to print (third picture) Depending on the filament type I'd make 30-50% infill to make it more durable.
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Description This model is a circle router to be used with a Bosh GKF 12V-8. It uses a 12x12 mm extrusion for the arm. The minimum routing diameter is 240 mm and the maximum depends on the 12x12 mm extrusion length you use. This model is…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Optimal mit einer externen Führungsschiene
Wydruk około 4,55 €–5,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ryobi Router Table RT-800 Throat plates
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Impression de la bouteille en creux : Le texte est imprimé en 4 couches pour une hauteur totale de 0.65mm sans boucle. Le corps est imprimé ensuite avec une levée de 0.8 au lieu de 0.4 pour éviter les crashs. Impression de la bouteille…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Bed mouted table for beds with a 2,5 cm gap. (Reccomended to place a small piece of cardboard in between, as it is not that tight.) For the Nest Hub holder i glued the pieces together with a hot glue gun. My print settings: Infill: 20%…
Wydruk około 11,55 €–14,12 € nettoWstępna wycena jednego wariantu
Connector to attach a trim router table to the Shaper Workstation . It has an indent to hang the table on french cleats. See that project for bolt and knob needed to complete the project.
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adapter to connect a Rockler Trim Router Table to a 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360.
Wydruk około 4,19 €–5,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Drilling into the phenolic top is a giant pain, and if you mess up you have ruined the top. I wanted to use the predrilled holes in the table to mount my dustright dust collection box, but none of the holes lined up. So I modeled the…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
6x6 CNC router bits holder for 6.35mm or 1/4 inch diameter, 1/8 inch or for 14x14mm bits housing.
Wydruk około 3,52 €–4,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In combination with some common plumbing parts, this print allows you to connect your EasyGreen EGL sprouter to your mains water supply so that you don't have to top up the water reservoir by hand. Great for general ease of use, essential…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Una solución sencilla para repetir redondeos de esquina en piezas de madera utilizando una plantilla impresa en 3D. La HF-CT-005 incluye 9 plantillas, cada una con un radio diferente: 10 / 20 / 25 / 30 / 35 / 40 / 50 / 60 / 75 mm La…
Wydruk około 3,21 €–3,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A frame to glue a mesh to protect dust from falling into the electronics of you AX6000 router
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
I want to make a dust shroud to protect the router in the router table from dust so I started by modeling the body of the router and making a cylinder clamp to attach to it. I made one with a relief hole for the power cable that can sit…
Wydruk około 3,17 €–3,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tento model slouží jako stojan pro WiFi router , který zlepšuje odvod tepla a stabilitu zařízení . Zvýšená konstrukce umožňuje lepší proudění vzduchu , což pomáhá snížit přehřívání a tím zlepšit výkon a životnost routeru. Vlastnosti: ✅…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
Printing the model: The model should be positioned with its biggest plane touching the build plate (as shown in the image below), and, by my own experience printing it, I recommend slowing down the printer from 6 mm and upwards for the…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena jednego wariantu
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Remix of the 10in rack shelf modified to house an EX400 style router. I printed this in PLA using supports and 15% infill. 0.2mm Balanced profile in PrusaSlicer. I recommend using pliers to remove supports around the router "pegs" . To…
Wydruk około 5,55 €–6,78 € nettoWstępna wycena jednego wariantu
Meant to hold cables so it doesn't have to bend too much and ruin the cable
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Taking off from this design (and with thanks to its designer ) , I developed my version of a Router Table type attachment for a Dremel 3000. The most major change I made was moving the height adjustment from the threaded "throat"…
This new baseplate allow mounting of several trim routers Tested with 65mm Makita Compatible with : Makita 3709 - 3710 - RT0700 - RT0701 Katsu Erbauer EPR710 Dewalt DCW600B, DWP611 & portercable 450 compact (2.4"x2.4") Ryobi (55x55mm)…
See update notes below ↓ 1-8-2026 This is to store a Milwaukee router inside the Packout Compact Organizer box by Milwaukee. The parts bin could use a lid but I don't plan on having much else inside this area other than the vacuum shroud.…
I wanted a corner radius template for making nice rounded edges on woodworking projects. I saw a few, but didn't like them for one reason or another. I tend to make a lot of small projects and want something for the router table. I also…
This Tool can be used to measure the outerdiameter of something. You can either print the numbers in the same color as the rest of the model or you can print the numbers in a different color. To find out how to do this, please read the PDF
Suggested Build Instructions: Material - Atomic Filament Carbon Fiber PETG (Ideal for UV Resistance and Ductility) https://atomicfilament.com/products/carbon-fiber-black-petg-pro Other materials: PETG, ASA, ASA-CF, ABS, PLA (PLA may be…
Model size: 180x400 mm Wood used: White Pine, White Maple Stain used: Golden Pecan CNC machine used: DIY CNC Router CNC Process: For the Adaptive-Clearing Job, I used a (SPE tools ¼in up-down cut bit: Amazon link ). At 500-1500mm/min…
24cm radius jig for the Makita Router Circle Jig (RT0700CX4). Uses M6 Hex hardware
This is a reinforced version of UDM mount by Revnull. Who's desighn while elagent and well desighned is lacking structulary. So to prevent a repeat of the brackets snapping i have redisghned it to have quater circle reinforcemnets up each…
I changed the shape of the lid and the most outer maze.
router attachment for dremel
This is an insert / organizer for Star Wars Outer Rim with the Unfinished Business expansion. It supports premium sleeves on the cards (Paladin Gawain sleeves shown in the images), supports vertical storage, has no lid lift, and was…
My take on a tracksaw guide for my Makita trim router. It may fit other trim routers but I don't own any. Will work on any Makita/Festool-style tracksaw guide. Has a guide slot to line up with the center of your router. You'll need…
Corner radius router jig with changeable inserts. Can be clamped to the work piece to use with a handheld router. The base is design to accommodate track saw clamps (slots for the clamps are 12mm wide, 7.5mm deep) Inserts are available in…
A very simple yet elegant stand for the iPhone - specifically designed for the iPhone 12/13 Mini initially, but works for all MagSafe iPhones (Not sure about the new 15 Pro Max, that might be slightly too tall in vertical mode; it will…
This wall mount is designed for the Wi-Fi router for the 2nd Gen Starlink kit . Cables can leave the back or the bottom. Designed so the back of the router is vertical. The four holes in the backplate are M5 sized . Optimized as much as…
Cut perfect outside radiuses with your router and these templates. I offer several versions with different radiuses. The jigs have integrated T-slots, so you can fix them with fastening clamps like the Festool FSZ 120 or FS-HZ 160 to your…
This is an enlarged base for the opoular Makita RT0700 Handheld Router. It makes it easier to guide the router on narrow pieces or at the edges. For a full description see my blog:…
(Buy me a coffee if they are useful to you thanks :-) Tip Me Here 7 Pcs Set Radius Jig Router Templates, Router Templates for Woodworking "Only 6 in the photo but you will get 7 files" Corner radius jigs allow for easy and repeatable…
I find the original design really good but did a remix to add some features. I simplified the slots for the clamps to be square to fit my Metabo clamps. The Jig now also prints without supports. I made the Jig Modular so I do not have to…
Router Radius Jig / Template with mountable holder R5, R10, R15, R20, R25, R30 Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Infill: 40% Category: Hand Tools
02.04.2024 Big Update on and Attention about Model I Have to apologize as I discovered that I have made a big unforgivable mistake on this model. Mess up with Radius sizes took a place. So please if you have downloaded this model before…
I built a DIY router table a while back and needed a connector for my regular old shop vac (I don't own a fancy dust extraction system with 100 mm hoses ;-) The part prints without supports and can be screwed right into your fence without…
A holder for router router bits with a ¼" shank. There are 4 mounting holes. I attached mine up and out of the way with (4) #10 wood screws. Update on 12/28/2025: Added two new versions for 1/2" router bits. The shank hole diameters are…
Router template to create a perfect radius on your corners
Here's a video further explaining and demonstrating the tool: An adjustable router plane, inspired by the one designed by Paul Sellers, but can accept a chisel for the cutter, and with ergonomics similar to the Veritas large router plane.…
Stackable Storage Boxes with Ribbed Design Keep stacking until you can't stack anymore! These stackable storage boxes feature an attractive ribbed outer design that provides a pleasing look and feel. Designed for fast printing with a…
NOTE: Please honor and adhere to the license of these models. Commercial use is prohibited and not allowed. Three router attachments for Dremel rotary tool, with different stabilizer bases. These models were inspired by the design on…
This set of easy to print parts makes a nice and well working router out of your Proxxon multi tool. It should fit for all similar tools that have a 20mm diameter metal clamping base. The height of the router bit tip vs. the base plate…
This came from wanting to teach myself Fusion 360. I had a hard time trying to print keycaps for my keyboard a while back. I eventually realized my keyboard uses Outemu Keycaps, not Cherry MX. Outemu has a bracket that surrounds the "+"…
Here are both pieces required to integrate into your project that needs access after making for battery replacement, on/off switches or storage. The cover or door itself was heavily influenced by https://www.thingiverse.com/nimaid 's…
Adapter for makita/Festool guiderail which fits the Makita router. I used two dowel pins Ø8mm for the connection between the adapter and plungbase.
Just squeeze router on router base. Print with less support possible!
Quick model up I did of the Eye of the Universe symbol from the Outer Wilds video game. I found an image online, traced in inventor, and then added the disc behind to hold together all the disconnected sections. The disc is not centered…
Store your ¼ inch router bits neatly in these gridfinity bins. Two size options one fits 13 router bits and the other can fit 25, both in a 3 x 3 gridfinity sized bin. Available with and without magnet holes in the bottom.
Gridfinity compatible storage for router bits, with a label slot for a 37x12mm label, such as Brother/Dymo's 1/2" labels. Label is retained in the slot with a small lip, no adhesive necessary, but won't accidentally fall out. Two concave…
I made this enclosure to house a Raspberry Pi and network switch that I use as a router. It includes spots for a button, OLED screen, and intake fan. Checkout my website for all of the parts and info!…
![Ripple Phone Holder [Vase Mode/Spiralized Outer Contour] with dual layer trick](https://media.printables.com/media/prints/26649/images/267144_d2b88d64-59bb-4c32-a4c5-9dea95a08578/img_20200311_212659.jpg)
