Liczymy pasujące modele…
Here it is for all 1:400 model airport builders and fans alike printable, detailed, accurate 1:400 Ground Service Equipment! With some help from ConnerWS (not directly I remixed his stuff), I have scaled down and edited his series of…
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
Please make sure to download the “ All Model Files ” and the “ All Other Files ” zip files so you get all of the .stl's and also the .pdf files that include the instructions and equipment placement drawings. (Link is near the bottom of…
Try out BumpMesh.com ! BumpMesh is a free, open-source, browser-based tool for applying custom displacement textures to your 3D models - no account, no software install, and no expensive licenses required. Simply load your STL, OBJ, or…
After paying a ton of money on chemicals it seemed really stupid to spend another 30€ on a simple plastic container. So I designed this fully 3D printed development tank. If you're cheap like me I guess you don't really need to develop…
I was looking for some proper stand for my new OneBlade. Originally I was inspired by this thing by xenotrim: https://www.thingiverse.com/thing:2986584 Thank you xenotrim! https://www.thingiverse.com/xenotrim/about It was not exactly tha…
The paper is finally published and fully open-access! https://bsapubs.onlinelibrary.wiley.com/doi/10.1002/aps3.11562 We have only scratched the surface in developing 3D printable tools for COBLE. We began with microscope adapters and a…
A Collander, a cooking pot with lid and a frying pan
DO NOT GLUE THE TOP FILM RETAINER It should be loose so you can slide film in/out. Use a dummy sheet of film to get the tolerances right before permanently gluing together. Open source with STEP files 26.02.23 Updated to v3 Light proof…
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
Update 5-Jul-2021: Added a mid section to the 45 version as sometimes under heavy agitation the film edges will poke out the sides. ---------- Not blocking commercial on this one, and included the Fusion and Step files for you to improve…
Model dla zaawansowanych modelarzy w fazie rozwoju. "Case EZT EN57 CZŁON A" Model ze zdjęcia wykonany metodą druku FDM przeskalowany do 1:220 (skala Z) (plik stl. w skali TT 1:120) Materiał: PLA Zalecana dysza 0,25mm Człon silnikowy,…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
this is a reupload of a design by mb_maker on thingiverse with a few alterations, it is an adaptable super 8, standard 8 and 16mm development tank. i have designed my own super 8 tank here :…
Equipment ladder, great for tall structures such as silos, tanks, conveyer system and what ever you see a tall ladder on. Replacement ladder, we have all broken at least one! Print it, cut it to size, paint it and install it. Available in…
I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…
Designed to work with the ARKON Drill Base Tablet Mount from Amazon located here, https://www.amazon.com/gp/product/B00PZZYR4K/ Extra hardware required 2 x M5x40mm Button Head Cap Screws and nuts 4 x M4x8mm Button Head Cap Screws and nuts…
I shoot and home-develop a lot of different film formats, and less-standard film development reels (like APS) are hard to come by, and expensive AF when they do creep onto the market. So.... I made my own. This one is designed to work in…
I designed this case for the "Lilygo T-Display-S3 Touch Development Board" which features a 320 by 170 color display and a touch screen. I'm planning on using this board in upcoming projects and decided to create this case for it. In…
See https://www.amazon.com/gp/product/B0811KLGDD/ref=ppx_yo_dt_b_search_asin_image
There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version UPDATE: I added tweaks 8, 9, & 10 described below, today (Nov 15, 2020) I shoot and home-develop a lot of…
Scaled from pictures so dimensions maybe somewhat off. Added printable PDFs for objective, 20mm tokens, and barbed wire
This model consists of the equipment for the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of parts by…
ESP32 D1 Mini Case Click shuts nicely Easy print. Dimensions are in the pictures Check out my other stuff https://www.thingiverse.com/micahjj/designs Feedback and Makes I really like getting feedback and despite having thousands of…
An enclosure for the LILYGO Meshtastic T-Beam ESP32 TTGO Development Board with LCD and rear mounted 18650 battery mount. Requires four (4) 16mm M2 screws. OpenSCAD file requires BOSL2 (https://github.com/BelfrySCAD/BOSL2) and nutsnbolts…
This is a development stand and enclosure for the Arduino GIGA R1 WIFI and its GIGA Display Shield , based on the basic enclosure provided by Arduino themselves here on Printables . Although I think it is very clever that the GIGA Display…
A hanger for B.C.D / Wing-Backplate, and other SCUBA gear. Designed after the Subgear design, that I can`t find anywhere anymore. The design also includes a mount for DIN regulators. I have included both an un-split version, for those of…
This is a fully functional replica of a WW2 German Gravity Knife. It was used by paratrooper units and the air force. Knife is "Type-2" version. The original knife is very rare and expensive. Now you have the chance to make one for…
For the Get creative with WAGO contest I thought it would be cool to have a case that houses a d1 mini esp8266 development board and Wago connectors to do the test setup instead of a breadboard. You need to print the following files:…
The Gladius can be split upright with 10mm brim or horizontally lying. After printing, the two halves of the gladius are glued together with second glue. The helmets can be printed split without support and brime. After printing, the two…
This Picatinny Receiver Development Kit is a CAD-ready model of a Picatinny-spec rail receiver that can be quickly adapted and customized to mount virtually anything to your blaster. The model isn't a usable tactical rail receiver without…
IMPORTANT! Watch the slicing tutorial if you do not have a dual extruder or something similar! Description Cards that are roughly the size of the original Settlers of Catan resource cards. The cards, when printed in PLA, feel and handle…
There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version I shoot and home-develop a lot of different film formats, and I found myself unsatisfied with the “solutions” I…
Models contain two types of auxiliary signal support equipment. Typically used to store the electronics equipment used to power nearby track signals. Two types are included: 1. is the standalone box which is located nearby 2. Is the type…
This is a case for the Heltec Wifi LoRa 32 (V2) development board ( https://heltec.org/project/wifi-lora-32/ ). I wanted to be able to have a case that can hold a lithium battery so this is what I came up with. I've included a version of…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
This is a new variation of my equipment box that I made back in March of 2020 for the Anycubic Mega I3 Mega. You can check out my older design here: https://www.printables.com/prints/33156-anycubic-i3-mega-clip-on-box This one is a bit…
I shoot and home-develop a lot of different film formats, and try as I might I couldn't find a reel/holder for APS films, so I designed one. This is the result. Oh, and if you are looking at this, I'm sure you've realized that APS film…
I've designed some most common and widely used weapons for my jets. The set consists of: AIM-9, AIM-7, AIM-120, R-73, R-27, R-77 air-to-air missiles AGM-88 Harm, AGM-65 Maverick, Paveway II, Kh-31 Krypton, Kh-25 Kegler air-to-ground…
[CZ] Upravený držák na DIN lišty ( https://www.thingiverse.com/thing:3433772 ) doplněný o úchyt tří komponent SIEMENS a tří 5mm led pro případnou indikaci stavu. [ENG] Modified holder for DIN rails (…
This is an enclosure case for the NodeMCU V3 development board and base. ESP8266 Development Board NodeMCU V3 can be found here: https://www.amazon.com/dp/B07DK2LRJJ/?coliid=I37O15QSY8H0VA&colid=1PKM0NV2CRFRC&psc=1&ref_=lv_ov_lig_dp_it
This a recreation of a hospital room intended to be utilized as a playset for children to learn about and normalize their hospital experience. It includes the base of the room and common furniture found in hospital rooms as well as…
Fits two 830 point breadboards with spacing to allow an ESP32 dev board to span between them, solving the problem with those boards not fitting common breadboards with any points to spare. As designed it works perfectly for Elegoo brand…
A collection of equipments known to have been used by Gjallarhorn's ubiquitous Graze mobile suit. The files within can be used to make the following gunpla accessories : GR-H01 Battleaxe Halberd GR-H02B Battle Blade (2 variants based on…
Floor stand for tower orientation of 2U equipment. I designed this for my APC SMT2200RM2U. Should fit 2200 and 3000 models of APC UPSes (or “schneider electric”). May fit other 2U UPSes and equipment. Be careful not to block any…
gym equipment including: 1x barbell 2x dumbell 2x 20kg plates 2x 15kg plates 2x 10kg plates 4x 5kg plates 4x 2.5kg plates 4x 1kg plates
MaciaT's developing tank worked really fine for me. It printed watertight in ABS+ without any acetone smoothing. But I had difficulties loading the film in the dark. A comparison to an old spiral showed that the grooves used to be much…
I modeled the equipment to use with a whiteboard when building courses. Scaled roughly for 4ft=1inch scale so they fit on a 18x24in whiteboard representing a 90ftx120ft ring. highly recommended to print equipment on its side rather than…
I have a few pieces of test equipment in my lab that utilize the common BNC type connector. The problem is that the connectors, when unused, are commonly left unprotected. Enter 3D printing. This little cap slips on and then twists to…
Stronger version of the original. Slightly bigger.
Here is another archmage item. Hope you find it useful for your sceneries! To support my work and get access to my miniatures please visit https://www.patreon.com/roleplayingminiatures Category: Games
Toy Kitchen Equipment: Casserole (stock pot), saucepan and knife with cutting boards. Knife assembly needs four M2.5x10mm bolts. Pan should be printed in normal position with supports (turn the stl upside down) . Panhandle is connected to…
A Greek themed stand for all the equipment a nurse needs to bring to the hospital on a daily basis. It includes a stethoscope holder, two large slots for box cutter and trauma shears, two hollow Corinthian columns for pens/sharpies, and a…
A simple tpu strap to hold equipment to your bike. With built in supports so just slap down load in some TPU and print away! Its super strong and the only part I have ever had break was the Little Loop that makes it easier to torque down!
Remix of an Arduino Uno stand by tonyrod on thingiverse. I modded this years ago and figured I share here on Printables in case it was of use to anyone. License type matches license of original model
This Equipment Wall Hanger Mount was modeled in FreeCAD using a parametric approach. Users can manipulate the model to suit their individual needs through the manipulation of the “parameters” spreadsheet within the FreeCAD model. The STL…
Mounting plates/covers for M5Stack Atom Lite ESP32 IoT Development Boards. I use these awesome little and cheap boards for measuring water levels in my tanks, light control, remote buttons and more! I couldn't find any covers. cases or…
I needed something to store the parts of daily usage for our coffee maker. The basic model is created in freecad, the pattern in the bottom is done in tinkercad. I printed it with some supports for the upper holders. Its done in nice…
I could not find a case that would fit my ESP32 that I found on Amazon, titled “HiLetgo ESP-WROOM-32 ESP32 ESP-32D Development Board” There was a model that said it did, but in fact it did not. Simple re-scaling just made new problems…
The Organizer contains three trays, which are mounted on a ground plate (I glued them on). Since the cutouts are very specific to my requirements, here is a detailed list of my equipment. First tray (low) some foam for putting in needles…
Printing with PLA is recommended for optimal strength. No supports needed. I also suggest printing 2 or 3 pieces with variant colors for different chemical substances (developer, stop bath and fixer) to avoid mixing chemicals.
I shoot and home-develop a lot of different film formats, and I found myself unsatisfied with the “solutions” I had for developing 110 film. I made a version specifically for my Jobo dev tanks, and got a lot of feedback from people asking…
| BASIC DESCRIPTION | development cards for the base game and seaferers expansion for the base game you need: 14 Knight cards 5 Victory Point cards 2 Year of Plenty 2 Monopoly 2 Road Building for the 5-6 players base game you need: 20…
this is a model to enable the home development of super 8 motion picture film. it holds a single cartridge (50 ft) of super 8 film emulsion side out in 3 layers. printed in transparent material enables fogging using LED strip lights…
Thanks to @FruitieX for the great original model. Modifications from their model: Resized the opening to work with the Added pass-through holes to allow wires to go under the gridfinity baseplate. Removed some extra features that were…
A 3D printable case for KIISU Development Board V4A by Rainwalker. A fun credit card sized development board that is compatible with Flipper Zero firmware and features some additional sensors and functions. Learn more about KIISU:…
Just print it with the filament type and color of choice. I used white PLA from the brand CST, which is a bit more flexible than other PLA I know. It's very sturdy, I use it with a light attached to an arm.
Simple Model of the ESP-32 NodeMCU Developmentboard by AZ-Delivery. Can be used to get Placement of the USB-Port right.
A small thin case for for the Kiisu v4. See https://kiisu.io/ for more information about this board. less than 90 x 58 x 8 mm without the lanyard/keychain part Uses the acrylic piece that ships with the dev board No hardware, snaps…
我们使用高精度 3D 扫描仪对 CR-Scan Raptor 进行了细致的扫描，创建了精确的 3D 模型。此模型旨在帮助开发人员和工程师更好地设计和制造 CR-Scan Raptor 的各种配件。通过这个详细的 3D 模型，您可以彻底了解设备的各个方面，为配件开发提供坚实的基础。立即下载并开始您的创新之旅！
A highly customizable set of caps for any potentiometers in use on DJ equipment. Specifically designed for the D pots commonly found in mixing gear. The customization options allow for a simple switch to round pots. The design comes in…
I print it in PETG and recommand to use 4 M3x6 or M3x8 screw.
The original holders were inconvenient foam material and did not hold the cameras well enough to be (quickly) transported in our “go-box”. Printed in ABS (TitanX) but PETG or even PLA works as well. Screw holes are sized for M3, but could…
Development tank for large format sheet film 13 x 18 cm ( 13x18 ). Fits 8 sheets. Printed with PLA and then coated with epoxy, as liquids are poured in . The inside holder is intended also as a drying rack. Also I upgraded the inside…
The training pole is ideal for team or indiviudals that want to improve their training abilities. There are two holes on the bottom part to store the poles when you are not using it anymore. Print characteristic: for the cilynders: - line…
This is a printable wrist roller that is compact and a versatile workout accessory to help build grip strength and forearm muscles. Print the bottom weight holder that fits all weight plates with center holes. The cylindrical handle has a…
Storage for USB Pendrives with big space for USB caps, Cardreaders, USB Hubs... Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm Infill: 15% Filament: Prusament PLA Galaxy Black Category:…
Hello, I wanted a good fitting, vented FPV canopy to use on the Jumper Xiake 800 VTOL. I found some online, but decided to 3D scan mine and make an exact fit 3D model that could be used to add various styles/designs of cooling vents. I…
This is an equipment mount for the DJI Air 2S drone. Thank you to Isaiahsdad for the design of the upper bracket (however, I did have to redesign it as the original model was not able to import properly):…
Selbst konstruierter Leitbaken. Druckzeit (Leitbake mit Fuß): 1h Material: PLA (Bake) & PETG (Leuchte, Fuß) Maßstab: 1:14,5
Print MK3.5 0.2mm Strukural Prusament PLA Supportn:None Infill_0% Seam position: Random First layer: 225/60°C Other layers: 220/60°C
Update 17/1-20: Models clean up by netfabb. This is a reupload of my special equipment troopers. I improved a bit on the plasma gun as well. The meshes are designed for 0.2 mm FDM. Category: Games
Overview Simple one-sided center-loading spiral for 16mm film processing. Fits to the AP and Paterson tanks. Up to 1.7m film length Up to 3 spirals in the 2x135 tank 16mm, 110 Instamatic, 2x8mm film format 250ml working solution Printing…
1U & 2U Vertical Mount Bracket for Network & UPS Equipment Designed for universal compatibility with square hole fasteners. For best durability, use PETG or a stronger filament.
I welcome any constructive advice. See PDF for more instructions.
I needed a taller set than the previous, to allow for the longer ballistic tips. These are approximately ¾" taller.
I will continue to upload files as I modify the rest, howeveer for now it just has the buster sword. make sure you download the right files, they are named and made specifically
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, effort, and CAFFEINE! ;-) And then check out my other models for…
Hi, this is a cool way to store your Bosch Cookit Equipment. 30% Infill / PLA / Support needed Have fun with it!
Printed with Prusament PETG Jet Black 0.2mm no rafts or supports required. This case is made to fit the MH-ET LIVE ESP32 Development Board. https://www.aliexpress.com/item/32814642296.html?spm=a2g0s.9042311.0.0.27424c4dCeXuj0
If you want to use this for a clamp meter that is different from the fluke 378/377 send me comment and I'll see what I can do Have attached a video to show the different ways I use to store them. Print with 2 walls and zero infill. Any…
Farm Equipment - Tractor 3D printable model.
Print without support. Box and lid
Case to hold your 3.5" TFT Arduino screen
If you search you can find a lot of development boards, but of course no one which combining Raspberry and Arduino and/or ESP32. Im using those boards, that s why Ive made my own board for Raspberry Pi, Pi Zero, Arduino Nano, ESP32 and…
There are as many cases as there are ESP32 derivatives it seems. Didn't see one I liked so made my own, inspired by Thomas V's https://www.printables.com/model/612413-esp32-case 2 versions, the newest looks the neatest but takes a little…
Printing This model has no printable parts. You will need approximately 2.5m of PETG filament for "willow twigs" and 1m of FLEX filament for handle. Braiding of The Whip Follow the Braiding of The Whip instructions in the manual.
