Liczymy pasujące modele…
Mit dieser Abdeckung können die Elektrischen Kontakte des Gerätemoduls von Husqvarna FLXi-System, vor Staub und Schmutz geschützt werden.
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
My Automower has always lacked a bit of downforce on the rear wheels – so I designed this spoiler. It fits perfectly on the lid without interfering with normal maintenance or service. I highly recommend printing the spoiler with the fuzzy…
Longer Version (13.04.2026): Upon request, I created a longer version that is better suited for loose soil. Despite its height, this screw can still be printed on the Prusa Mini. As with all models, no supports are required. Please note…
This tool is handy for quickly setting the tension on late model KTM/Husqvarna/Gas Gas 125-501 dirt bikes that has a specified slack of 55-58mm, measured between the top of the swing arm and the bottom of the chain. Note: this has only…
This is a holder for Husqvarna batteries. It will hold and lock the batteries i place so you kan mount it with screws in your car, on the wall, or on the ceiling, and it cant fall out. There are two versions. One for the BLi300 Battery,…
Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…
My mower got stuck in the slopes in the garden in heavy rain with the original wheels. This is a wheel with more grip than the original due to larger spikes. This is a replacement wheel for the Husqvarna Automower that should fits these…
Small spacers, two different sizes. Printed mine in ABS and it's been hassle free for three years. Excellent throttle control. Undo your throttle and pop them in. It's that easy.
A spare wheel for the Husqvarna Automower 305. Since the originals are too expensive I have drawn this replacement. I hope that it is durable and also copes well with slopes. But that will show over time. Rim and profile are screwed,…
If you have a 23+ KTM, Gas Gas or Husqvarna you know removing the new radiator cap is nearly impossible! Works on all 23+ KTM/GasGas/Husqvarna Austrian bikes. Print in PETG, TPU, ASA 100% infill with backing
Husqvarna/Stihl Heckenscheere/Motorsäge Wandhalterung.
New and improved! Some have asked for one that is chamfered and stronger. So here it is. I've also included the f3d file. -------------------------------------- My 701 had the fork cables banging off the forks. Plus I wanted them off the…
I use the brake line guide on my 2018 KTM EXC F450 which is equipped with a navigation tower for rallye racing. It will fit on all bikes with a similar fork. The updated version is short and got an offset in order to get more clearance…
This is a model to replace a broken or old KTM or Husqvarna side stand base used in enduros (like the EXC) and some motocross bikes. I have uploaded two models, one with a hole in the middle so you can add a standard M8x30 bolt for…
Object description: Grinding fixture for resharpening a Husqvarna Lawnmover Saftey Blade, alternative blades and similar blades for other electric lawnmover types. You can save about 8 Euro = 8 Dollar (at the time of publishing) per…
It is my own desing (no remix). The wheel has been designed to fit an Husquarna Automower 308. Print instructions PETG. The dimensions are set for the cover to hold without glue after treating both parts (wheel + cover) with epoxy (ex:…
Husqvarna keychain. Printed with Prusament PLA standard settings. Colours: PLA Prusa Orange & Gentleman's Grey
Husqvarna brand keychain, with a simple and easy design for a quick impression and low material cost.
When pouring from large bar oil containers, the forward grip of the chainsaw got in the way. This funnel “moves” the hole to the side and out from under that grip.
Replacement front wheel assembly for Husqvarna Automower. You will need a set of two 626ZZ bearings (6mm inner diameter, 19mm outer diameter). Axle locker can be replaced by a 6mm star lock washer. If you decide to print the locker, make…
I printed the lever and adjuster in both PLA and PETG using the built in profiles in PrusaSlicer but with 50% infill. Both levers have worked well for test rides. I plan to do some trail riding to see how the lever holds up, but so far…
This is a holder for Husqvarna batteries. It allows the batteries to be charged in place. The back is open, so you can mount a spring if you want. The the battery will fly out when you release it. NOTE!! There is a couple of small taps…
Used for later Husqvarna enduro models, replaces the headlight so you don't break it during crash. Two versions, you can print with the Husqvarna Logo as well. (the one on the picture is upside down, printed it wrong). Added another…
Spare maintenance tool to open body on Husqvarna Automover 305. Tho tool has a protruded edge at the back to allow easier removal from its space. When the tool is inserted into its space the distance should be facing downward.
J’avais commandé des roues d’origine, mais les pneus n’ont pas tenu la saison. La tondeuse a un meilleur grip avec ces roues :-) Imprimée sur Prusa XL en 2 matériaux, en Prusament PETG-CF et easyprint TPU pour la roue et en PETG pour la…
Just bought the new Norden 901 and discovered, that I do not like the “design” (I would also not call it design) of the OEM phone mount. Gladly I already had experience with phone holders for motorbikes (including 3 broken camera modules…
4 Top and Bottom Layers 20% Infill I printed with Supports and the remove pretty easy from the studs. With these settings these wheels are wider and lighter than the stock wheels. Category: Other
My Automower 415x had trouble with my lawn, so I started experimenting with wheel designs. I went through several iterations and this design seems to work best. The main problem I had printing is the size - these wheels are too big to…
Disclaimer : Use it at your own risk. Road regulation in your country probably forbid such a modification. It is designed for 2020+ bikes or higher (despite it can probably used on other bikes) By adding this spacer on the rear speed…
Sized to maximum on Prusa MK3S+ Printed with 0,6mm nozzle, material switched manually
A redesign of the OEM Part 48600698 adapted for 3d printing. I split the original design to allow for installation and replacement without uninstalling the forks. A groove was also added to be able to add a piece of wire to increase…
Project Inspiration Hi. I recently purchased a used Husqvarna Viking 1100 and it was missing the stitch cassettes. The 1100 originally came with 4 cassettes, A, B, C, and D. However I was able to find a combination to make an “E” cassette…
Husqvarna brand keychain, with a simple and easy design for a quick impression and low material cost.
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 44mm x 33mm 6mm Keyring hole
I was missing a few clips on my riding lawn mower, and decided to model and 3d print replacements. It turns out that this clip is used all around Husqvarna products, so might be useful to others. I made a modification to the way it is…
Husqvarna - Husquarna - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of their…
For printing these parts, it is recommended to use PET-G. For greater tightness, print at a speed of 50 mm/s and with an elevated nozzle temperature. Use self-tapping screws (25–35 mm) as shown in the figure. Original tires can be reused…
Ich habe eine Erdschraube zur befestiguing der Ladestation bzw. für die Garage meines Husqvarna 315X erstellt. Sie ist Baugleich mit den mitgeliferten Erdschrauben, von denen leider zu wenig dabei waren. Ich habe sie im Bambuslicer mit…
I made this to compress the rings on a Stihl 031 chainsaw. Plan on making more sizes, if you have a piston size to suggest send email to [email protected] and i will make an stl to add to the project. 46mm for O28 woodboss 48mm for…
Lost your a clip for your Husqvarna lawnmotor? This is a quick replacement if so your can put those important covers back onto your machine. Both STL and STEP provided in the download. Tested with 0.4 nozzle and 0.2 layerheight Material:…
Replacement pull start handle for chainsaws – compatible with many Husqvarna models. Based on OEM part #537232501. Designed for strength and comfort.
I suggest ASA / ABS a bit of grease / oil strong infill You don't want this to be stuck.
Capture the legendary status of a true automotive icon with this 3D printable STL model of the Lamborghini Countach 5000 QV. This iconic poster car replica is perfect for automotive enthusiasts and fans of 80s automotive design, bringing…
Created attachment for Husqvarna Robot lawn mower. Mounted with 3x3 screws on the wheel itself. This will provide more traction in uphill and difficulty areas.
These knobs tighten the foldable mower handles when they are in the straight position. The ears kept getting broken off these knobs on my lawn mower. I tried to make it resemble the original part as best I could, except I changed the long…
A simple wall mount for the HUSQVARNA 553RS Brushcutter. Can also fit other models. Use some washers when fastening. Use Brim for good adhesion, print upside down (like the picture i added)
There was a little gap between the mounting point and the Original GPS Mount (KTM Part Nr. 63512992144); this allowed the mount to rock back and forth, which slowly but steadily seemed to loosen the two bolts holding the mount. The part…
Front tire for Husqvarna Automower 315, 320, 33X 430X 450X. Printed in Filamentum FLEXFILL 92A.
print parts laying on their side with hole horizontally using PETG or PLA secure using #10x3/4" pan head square drive metal screws straight into the existing wheel tread profit
Wall Mount for Husqvarna BLi Batteries. Works with BLi 10, BLi 20, BLi30, BLi 100, BLi 200, BLi 300, 40-B70 and 40-B140. I printed them with 5 Perimeters and 0.25mm Layer Height in Prusament Matte Black PETG with Organic Supports. Print…
Please like and post your makes ! Why pay $ 120 for a battery pack while you can do it for less than $ 25 ... And using the same brand of batteries as the original ... For : Husqvarna Automower 105, Automower 305, Automower 308, Automower…
Valve with the Husqvarna logo imprinted on the top suitable for the tires of all cars and motorbikes
portachiavi husqvarna realizzato con shapr 3d e stampato in pla+
3D PRINTING SETTINGS Nozzle: 0.4 Material: PLA Layer hight: 0.2 Infill: 20-100% Print it with multiple colors: Base color is black. Insert filament change at 1mm hight. Next filament change is at 2mm hight, insert the color you want the…
Es gibt 2 Versionen: mit seitlicher Halterung und ohne seitliche Halterung. Aufrecht stehend drucken. Printer: Ender 3 /Prusa Mks3+ Nozzle: 0.4 Layer: 0.3 /0.2 No Support skirt
Modular Mount. Baseplate to be added to a GPS Mount/Stant for an Garmin Zumo. Can be changed to a differnet GPS by doing a new GPS Stand. V2 of Garminhold is 1 cm lower above the TFT so it didnt block the airflow.
Support permettant de ranger verticalement une débrousailleuse thermique Husqvarna.
Fuel your passion for speed and adrenaline with our Husqvarna Racing wall art logo. Designed for thrill-seekers and speed demons alike, this emblem embodies the raw power and excitement of the track. Elevate your space with a symbol of…
This is a toy automower (robot mower) loosely modeled after the Husqvarna 430X. My young daughter is a huge fan and we do the neighborhood tour to look for them everyday back from daycare. I thought I'd print one for her but found no…
This is a basic tool used to adjust the Compression on a WP6500 cartridge fork. It is very handy since most bikes you would need to remove your handlebars in order to adjust with a flathead screwdriver. This is a flathead tip on a disc.…
In the case of a crash the lower triple clamp hits the steering stop screw causing marks, scratches and sometimes breaks the triple clamp. One of the detailed pictures shows some damages caused by the regular steering stop screw. I…
File handles for the round and flat file to sharpen Husqvarna chain saw chains. Fits the Combi Can. Filhantag för rund- och plattfil för att slipa Husqvarna motorsågskedjor. Passar till kombidunken.
Hi ! Here are Heavy Duty replacement Screws intended to secure the charging station to the ground. Print in PETG or ABS because PLA is biodegradable Fill 100% You dont have allen key adapted ? Don't matter, use the Hex side of a bit…
replacement cover for chain on Husqvarna WR 2005 kryt řetězového kolečka
Screwed Husqvarna / KTM Oil Funnel for Offroad Models with air release for better oilflow Should fit on all KTM / Husqvarna / GASGAS Offroad & Supermoto models. Feel free to remix to lighten it up or add some features.
My Website: Cheers 2 Engineering (google.com) This is a robot quadruped that works well with mg90s servos or any 9g servo. I used the thicker black servo horns that were given with the tower pro mg90s servos. 4-LegTop V2 4-LegFootV3…
This is something that not many people will need, but if you happen to have a Husqvarna Automower, model G1, G2, 210C, 220AC, 230ACX or Solar Hybrid you might have experienced that the front wheel falls off due to corrosion of the…
I know, this is for a highly specific need - but I had that need, so someone else might, too (it did, in fact, get about 10 downloads over at Pinshape) … The Automattic 21E is built like a tank, which means there's probably quite a few of…
Ground screw for fix Husqvarna automower base https://www.az-shop.cz/cms/fiskars/products/automaticke-sekacky/nahradni-dily/pripevnovaci-srouby-pro-nabijeci-stanici-k-sekackam-automower.jpg
Don't want to pay for a 70$ HVA key ? Print the cover and use it on a blank key. — I retro-enginered the 701 key from Husqvarna because I destroy a key into my motorcycle. This model isn't 100% close to the original key because some curve…
Dimensions: 45.5mm x 54mm For multiple colors: 0.00mm - 2.00mm (white) 2.20mm - 3.00mm (blue)
The klipper engine bracket for the larger automowers, please measure the center of the axis on the motor to confirm diameter of 25mm before printing I will add a model for the smaller engine in the future
Print in TPU or similar for flexibility and fuel resistance, also recommend using some gasket maker/RTV to be safe.
Lower radiator gaurd for 2020?? and newer Husky FE models with factory radiator fins. Fits on Prusa MK3S print bed (barely). Designed specifically on a 2022 FE350s (USA) I used fasteners from “Bolt” track kit. Mirror part in prusa slicer…
I've created a presser foot holder shank compatible with Husqvarna Viking sewing machines, including the Jade and Sapphire model lines. This 3D-printable design allows for easy attachment of presser feet and serves as a replacement part…
Husqvarna Battery String Trimmers & Weed Eaters wall mount. It should work with all of them (US 220iL, 320iL, etc.). Tested with 215iL (EU) Printed in PLA. Notice: with the standard tree support print profile I had bad overhang results on…
Slider foot peg for most motorcycles of Husqvarna KTM or Gas Gas
In a working season I ate 2 or 3 of these blue parts, they are really expensive where I live. So I designed, and printed one with PETG. I use the same for 2 seasons now and it is even cheaper.
New design of my serie of replacement wheels to fit an Husquarna Automower 308. Also compatible with: - Flymo 1200R Both Wheel and cover were printed in PETG. Removable of the cover through 2 holes from the back with a 3mm shaft. v.3 did…
A double sided keychain. No need for support. Make it with 1 or 2 color changes (as shown in the pictures) or just plane
Handle knob part #532185588 for Husqvarna lawnmowers. Used to tighten the push handle in the straight position. It has M8 nut hole and made a little bit more stronger.
PORTACHIAVI HUSQVARNA - HUSQVARNA KEYCHAIN
Introduction Before creating this model, I tested the aluminum NICECNC and a model from Bob_58027. Both were uncomfortable in terms of height and tilt, which inspired me to create my own design. Additionally, I used a TPU spacer to fix…
… using the 4x original oxford screws and 2x M5 inbus screws for mounting on the handlebar. I scanned the handlebar with my phone and modelled the mount around it. I printed the parts in Fiberlogy PA CF12.
Roue avant de l'Automower, Husqvarna 305 à partir de 2020, modèle a 4 roues. Le fichier est une roue avant de remplacement. La fixé sur l'axe de l'ancienne roue mettre un roulement ou récupérer celui de l'ancienne roue et fixer sur l'axe…
Updated January 2023 Added 3 wires junction Box Added 4 wires junction Box Added Optional Cover Hi ! Because i didn't have under hand this kind of Gel Junction Box like this http://s.click.aliexpress.com/e/co7QwopK I Made one adapted to…
Soft wheels for Husqvarna Automower Compatibility List 305E Nera 310E Nera 405X Nera 410X Nera 430X Nera 450X Nera 520 550 Problem of original wheels The original wheels cause a lot of noise and vibration when driving over hard surfaces.…
If You want to replace the lamp with a plastron - You need that..
Oil drain pipe for doing oil changes in KTM, Husqvarna or Gas Gas motorcycles (or anything with a M12 x 1.5mm oil drain bolt thread). To use, lay bike on side, remove drain plug, screw in drain pipe (I put a plug in the end of the pipe),…
A wall mount dedicated to the Alfa Romeo Giulietta QV with the iconic 4 leaf clover.
This is the Base and spring for the shell of the above mentioned robotic mowers, since they are all the same with a different shell. The original Rubber Part gets brittle and rusty over time. The replacment part is 8€ *4 plus shipping,…
Hour Meter mount for KTM, Husqvarna, GasGas, Sherco Replaces the speedometer. Original made for my Sherco SE should also fit for KTM and others. I print with PETG and 100% infill for max. stability. Lasts now more than 30 hours.
Made this to mount my Mychron 5 and stock dash so I could see them. Printed on Prusament PC carbon fiber 4 perimeters on edge for stregnth (layers perpendicular to handlebars) M5 hardware 2022 Husqvarna FE 350, likely fits other similar…
Create another dash mount this time not clamping to the bars but just raising from the stock location. Clears a GPR V5 steering damper sub mount. Likely works for other dampers, or bar risers.
A remix of the well known Maker World Clock for all HUSQVARNA 701 fans. If you need to buy the clock part on the net just make sure it has a thread length of 13mm. Want more clock designs? Have a look into our DECORATION collection .…
I reproduced the original Husqvarna ABS sensor cable clip because this cable rubs on the wheel and cuts. It is 10mm longer than the original
Mit dieser Akkuhalterung zur Montage auf der Wand können Sie einfach Ihre Akkus von Husqvarna, die das "BLi-X-36V-System" haben, verstauen. Dank der leicht schrägen Rückwand bleibt der Akku stabil in der Halterung. Befestigt wird die…
Changed the Cells on the Battery, only to notive that the Battery holder is glued to the Batterys. Made a new one. Please consider printing with 0,25 nozzle. Also depending on you location and cells, you should also think printing in abs,…
