Liczymy pasujące modele…
Remixed a caliper holder by Klave (linked) for the honeycomb storage wall. Hexagon's (connector) faces was offset by -0.15 for snap fit into the blank insert needed for the wall storage. The blank insert can be downloaded at…
Hallo Freunde, ich biete euch hier einen Batterie Organizer in Getränkekasten form zum download an. Ihr findet hier Kästen für AA, AAA und 9V Batterien. Ich hoffe sie gefallen euch.
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Simple but sturdy storage for 10 CR2032 coin cell batteries. MK3 has a few minor improvements over the original/MK2: Lip to hold the top on Thicker dividers to make them stronger Slightly more clearance to make coin cells easier to remove…
Holder for a CR2032 coin cell batteries. Battery is securely held in place Single (3V), double (6V) and triple (9V) versions Designed for use with breadboard jumper/dupont wires or bare wire Total holder thickness is 7.3mm for the single…
Based on the block template i designed some gridfinity battery holders i couldn't find online (at least not in this dense packing). Fusion files and STLs included for these batteries 40x LR44 8x/11x/14x CR123(A) 20x CR2032 12x CR1632 Note…
Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P . The design of the bracket is ventilated for actively cooled units to be installed, independently from the orientation of the intake fan. The bracket is also compatible…
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
A half height beer crate to store 14x2 (28 total) CR2032 (or thinner) coin cells. Fully compatible with the original battery beer crate design. The gluable bottom part from the original also fits. Stacking two of these half height crates…
This is a remix of Tabb's Button Cell Battery Box from Thingiverse. It's a box for CR2032 and LR44 batteries. I have added four places where 4x1,5mm magnets can be fitted. This is a remix of this object:…
Minor redesign of jbergmans' 2032 battery storage. Can hold up to 8 batteries of types CR2032 and CR2025. Also see my model for CR1225 batteries: https://www.printables.com/fr/model/874743-cr1225-battery-holder Very easy to print, small…
This is a remix of the great battery holder by @dhiltonp . I've moved the slots and adjusted them to be 2 slots for CR20XX batteries and 2 slots for LR44/SR44/other 11.5mm diameter batteries. Gridfinity is a project by Zack Freedman ,…
Combined stackable beer crate for AA, AAA, 9V Block, CR2032 and a empty crate for batterys. The crate needs a support geometry at the bottom.
This holder can contain 8 individual cr2032 batteries. Printed on a Prusa Mini in Orange Prusa PLA (Not Prusament) Part of the Gridfinity storage solution. What is that you say?
I love the beer crates for storage! My button cells needed a new home, so I remixed again :-) This is a remix of 2 things, the famous battery beer crates and and a similar model found on thingiverse. I made some changes to the original…
First of all, thank you for downloading my model :D Amount of batteries in configs: 2x1 CR2032 x 16pcs LR44 x 12pcs 1x1 CR2032 x 8pcs LR44 x 6pcs Print settings: Speed: any (depends on printer) Infill: 10-100% Number of walls: 3-infinite…
A small holder for a 5 mm LED and a CR2032 coin cell. Snap the pieces together to make a simple, battery-powered tea light. No glue or soldering needed. Print it upside down, no support needed. TIP: flickering LEDs are available and would…
CR2032 Battery Holder 1x 2x 2x2
Diese Box dient der Aufbewahrung von bis zu 20 Stück Batterien CD2032. Sie besteht aus einem Unterteil und einem Deckel. Der Deckel ist so gearbeitet, dass er gut auf dem Unterteil hält. Die Abstimmung von Haftung und Lösbarkeit habe ich…
This model snaps into the hole behind the power supply in the NR200 case through which the power supply intakes air. Normally there is a gap between the PSU and the ventilated side panel of the case, which allows the PSU to intake warm…
I created this battery adaptor for my aqara motion sensor as I had plenty of CR2032 batteries but no CR2450. Version 2 is 4mm thick that fitted perfectly with the motion sensor. I have included the 5mm version for other applications.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Pre-colored .3mf file included. Best to be printed in wall…
Since there is a battery holder design contest going on, I thought it may be useful to have a reference model of a CR2032 battery for which holder can be created. The model is measured from an Energizer CR2032 battery. Model can be…
Simple but sturdy storage for 10 CR2025 coin cell batteries. This is based on my CR2032 coin cell holder design, but the following User Parameters changed: cell_diameter = 20mm cell_thickness = 2.5mm See the original model under “This…
Holder for digital / vernier caliper. Relies on the “insert-empty” hex part (or similar x2 x4 joiner parts) used in the HoneyComb Wall. Further types of insert-empty can be found here (reduced friction) and here (rotated position). Hex…
Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P . We are making free to print and modify the design for the clips that hold the paneling of our most beloved ITX enclosure(s)! Lost one? Your product is out of warranty?…
Storage Box for AA/AAA/CR2032/9V Battery or /SD/Micro SD/or small parts 3 Type of lid type 1 full closed no stakable option no inscription type 2 for stakable option no inscription type 3 for stakable option with inscription infill 10 %
Printed with Prusament PETG Jetblack 0.3mm no rafts or supports required.
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P . We are making free to download, remix and modify the design of the top panel of our most beloved ITX enclosure(s)! You can easily modify it to add support for a…
Simple CR2032 coin battery container.
Remix of container for CR2032 batteries.
Update 20240531: Fusion 360 file uploaded for customization. Battery name text could also be changed in PrusaSlicer by cutting the old text away and using PrusaSlicer's text command. Storage case for CR2032 batteries. Sliding lid allows a…
Just a simple 2032 battery holder, holds 10 batteries
This is an expanded version of Jason D Modular Battery Holder. I've made several changes to clean up all the “remixes” out there, make the modules truly standardised and “OCD friendly”. I was basically annoyed how different remixes…
This is a work in progress for the NR200- adding a side panel extension that's 3D printable to allow for taller CPU coolers like the NH-D15. Currently my designed clips hold the side panel 15mm out from the side (extending the 153-155mm…
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
Revised all files in April 2026. This is my interpretation in Gauge 1 (1:32) of the Kds 54 / Ucs 908 Silowagon operated by Deutsche Bundesbahn. http://www.dybas.de/dybas/gw/gw_u_9/g908.html…
I've always wanted to use this kind of coin cell battery holder for a project, and finally the time has come.. I am sharing only the battery part since my top secret project is on its early development stages. Hope you'll find the battery…
Simple 1x1 size Gridfinity container to store 8x CR2032 and 3x CR2430 Batteries Printed with: 0.6mm Nozzle 0.30mm Layer height 15% Infill
I was struggling to fdm print the final top section for my MR20 remote (2020 model TV) so I remixed the original model with an extra extrusion to make 1 stem thicker. It may have only been a me problem, but here it is just in case anybody…
Added CR2032 Text works also with CR2025
Inspired by this design by arcaneoctopuslab: https://www.thingiverse.com/thing:4907153 I really liked the simplicity, but his design assumed LED's with longer connectors than the ones I use, so I made my own version that could support…
Summary of the T240R- Top 240 mm Radiator mount for the Coolermaster NR200 ITX case. This is a mounting assembly/system mod for the Coolermaster NR200 to mount a full size 240mm radiator with 2 120mm fans to the top of the NR200. This mod…
Digital File to DIY 3D print ER20 threaded (25x1.5 mm) Chip Fan. The chip fan produce at lot of air movement so it is recommanded to use it with a strong vacuum capacity dust boot. Use at your own risk (mine is working fine). STL, 3MF and…
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
A remix of CAD-Guy's stackable beer crates that holds CR2032s. It's shorter than the standard crate, but I left enough vertical space to support the “hand holds” such that I could still fit a finger through. Another CR2032 remix was made…
3 shell, iron the top surface for better look. Very easy to print.
Print the empty Bierkiste and this insert. Two of them stack on top of each other and fit inside the Bierkiste. Holds up to 20 pieces of CR2032 or smaller (CR2025 etc) coin cell batteries. Not very print-optimized yet: the walls could be…
Design description This is a gridfinity holder for 10 CR2025 Coin cell batteries. Block area is 1x1, and has a height of ⅔, stackable. Gridfinity description Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop…
I needed a simple and small led light base for the small prints and models I have. The easiest way for me was to modify a cheap cr2032 coincell battery operated tealight design. So I did it.. It requires soldering some cables to the LED…
Holds 5 CR2032 coin batteries in a 1x1 Gridfinity container
CR2032 holder good for small led lamp or for other projects with battery CR2032.
Half-height beer crate style containers for CR2032 and CR2477 coin cell batteries. Can be used separately or stacked after gluing the stacking piece to the bottom. The CR2032 container can fit 28 batteries while the other one should fit…
Best results came from being printed in PETG.
The tray holds a total of 16 AA batteries, 16 AAA batteries and 4 CR2032 batteries. Print instructions The tray should be printed upside down to get a fine top side. Glue the bottom plate into the holder with some glue.
Simple but sturdy storage for 10 CR2016 coin cell batteries. This is based on my CR2032 coin cell holder design, but the following User Parameters changed: cell_diameter = 20mm cell_thickness = 1.6mm See the original model under “This…
I designed this because I wanted a more realistic tire model for my RC car designs. So here goes! The tire prints without supports and without infill when put on the side. With TPU it should take ca 10 hours per tire (0.3 Draft) . The rim…
This is a small clip I designed to hold one CR2032 battery and one LED. I was designed to make lighting tabletop gaming terrain easy and fun. Please consider supporting me and my work at patreon.com/augustmcdaniel
Model slots into the front panel. This has only been tested with the 8Bitdo Ultimate C and Switch Pro controller but comment if it works with others. Revision History: 2023-08-01 R0: Initial release 2023-09-04 R1: Fixed orientation to…
This CR2032 holder was designed around two interlocking half-twist hex helices to provide an interesting look for this functional print. The inner tray slots hold twelve CR2032 batteries securely preventing the batteries from falling out,…
I created two models, each specifically designed for CR2032 batteries, with gridfinity dimensions of 1x1x3 and 2x1x3.
This CR2032 Battery Holder is a safe way to store coin cell batteries. The batteries snap into the holder but can be easily removed by pressing on the battery from the bottom of the holder to pop it out. There is a version that holds 10…
Mount slim fans on top of Cooler Master NR200P case. I wanted my PSU to hang higher inside the case to help with cable management, however that caused the power plug to collide with the stock 25 mm thick fans. So I made this to install…
Stützen auf dem Druckbett aktivieren!
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Once upon a time, in post-war Germany, there emerged a marvel of automotive engineering known as the Messerschmitt KR200. Designed by aircraft…
A remix of the CR2025 holder with more width to fit the slightly larger 2032 cells.
Scaled up a notch to ease up the tolerances and get the cells out easier
I wanted to make use of all the space available on the bottom of my NR200, so I made this adapter to fit two 140mm fans instead of having two 120mm fans and some unused space. I made this 9.5mm high in order to fit the adapter and fans…
the battery-box is based on brass_ring 's model. the main difference is that this consists of 2 parts and can be easily assembled with 2 clicks.
This is a fake/dummy battery that allows you to use any larger battery (eg AA or AAA) instead of the low-capacity CR2032 You will need 3D print "part +" 3D print "part -" copper washer (used as "+ contact") M14x20x1 -…
This organizer holds 60 AA, 65 AAA, 9 9V and 22 CR2032 batteries. I used two colours because the filament ran out during print. I printed it in PLA, using lightning infill. No support needed.
UPDATE 2025/01/19: It seems my model got messed up prior to uploading to Printables. I have uploaded now a fixed model with a battery gap of 3.75mm (on paper, which is the loose fit) and will also recreate the tight fit model (3.45mm…
Fits 24 ER20 collets in a 3x4 Gridfinity pattern
This is a custom made battery box organizer for 20xAA, 20xAAA, 2x9V and 4xCR2032. Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 3 (you can use 2 but the sides flex a little when you push) Top layers: 4 layers Infill: 15%…
Designed these PCIe slot covers for the NR200 to give the CPU cooler a bit more air, also they snapfit ! Note The covers are dimensioned using ABS which shrinks a bit more than other plastics, so if it's too loose for you, try scaling the…
Perfect place to store those extra ER20 collets you have laying around.
During the development of the Cooler Master MasterBox NR200P , we created several variants for the case feet design. Following numerous iterations, the launch design was chosen, but we thought "why not share the iterations with our…
NR200(P) tall feet with two additional screw holes to the original design. Benefits Better airflow Easier filter clean-up Easier table clean-up More robust attachment to the bottom plate due to the added screw hole Printing Infill: 25% No…
About: I usually use CR2032 and small button batteries (such as LR44) only, and could not find anything small that would suit my needs. Can be used with 6x2mm round magnets used in gridfinity sets. Big hole diameters - the one on the top…
Not much to say - I used it to power an arduino nano sound and light installation where I constructed a frame where the battery holder can be clipped in. So it is easy and save to print. I used this…
Don't want your coin cells to flip around in their slot when adding or removing batteries? Want an even easier way to efficiently use this functional and space saving design? can hold these coin cells/batteries (2 slots for each group):…
NR200 Mac-Grater Front Panel
This is the size I'll be using with my Dodge Ram remixed body ( I'm going to re-remix this body but that's another story !) The tire prints without supports and without infill when put on the side. With TPU (depending on the brand) it…
FULLY REVISED MODEL (APR2026) Nederlandse Spoorwegen DG conducteurswagen in gauge 1 / 1:32. https://nl.wikipedia.org/wiki/Dg_(spoorwegmaterieel ) The concept for bearings, wheels, buffers, couplings, etc.......... is the same as I applied…
As I wanted a removable battery driven crystal light with an integrated switch, I redesigned the bottom half to fit my needs. (Original: https://www.thingiverse.com/thing:2461569 ) The base of the crystal is designed specifically for the…
2020 R20-90° Rounded Profile 2 sides Open - Profilo 2020 raggio 20mm Adjust the Z scale to obtain longer profiles 24/08/2026 Update, published: 2020 R20-90 RV3.stl (Geometry cleanup and optimization) Connectors: All our designs are free…
TLDR Deshroud mod for the MSI Ventus 3080/3080Ti/3090 in the Cooler M case Fan shrouds designed to perfectly fit the Noctua NF-A/F/S12 and bridge the gap between the fan and the GPU heatsink 2 Versions available for use with & without…
Successfully printed using the PLA PM Metallic Green. Printer: Prusa Mini Layer Height: 0.15mm Infill: 15% Supports: None Other batteries holder having the same design: https://www.printables.com/cs/model/31365-aaa-battery-holder…
This is a portable CR2032 case that measures just ~6mm thick with a top that snaps close. The button cells are held by clips. The positive and negative marking holes serve to suggest the most secure orientation to place the batteries, and…
This is for Zach Freedman's Gridfinity System. It's a 1x1 CR2025 Battery Holder. Holds 9 batteries. With magnet holes. This is a remix of the Gridfinity battery holders by HusHageHobby.no who has holders for CR2032, C, D and other types…
This model is a remix of tony 's " CR2032 battery holder " I have modified tony's original model to have text on the front that states the battery name, making it a bit easier to quickly grab and identify if you have multiple sizes of…
This is a base plate for the Bosch Colt PR20EVS palm router (trim router) that takes standard 1-3/16" template guides. I tested using the Lee Valley Veritas template guides. This model is designed true to size and I use x/y shrinkage…
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
Storage box for ER20 collets. Also included is an Gridfinity Insert for the storage box wich also uncludes space for 2 wrenches.
Sturdy case for CR2032/CR2025/LIR2032/LR44/SR44 coin batteries with screw attached lid
Wanted a bit more airflow for my NR200p dual rad water-cooled setup so cut out some of the excess behind the front panel and replaced it with this. Its a big model, just about filled the bed on my Voron 2.4's 30cm build plate. Needs 8 M3…
Frame will give you another 9mm of width. Frame V2.0 (TG and metal and radiator mount compatible) 7-part print. Radiator spacings fixed, they are now precise. Also made holes 4mm big to accomodate Deson m3 screw inserts in radiator mount…
![[gridfinity] Coin Cell Battery Box: EASY REMOVAL/ADDING with finger or wedge (CR2032/CR2016, 357/303/SR44, A23/MN21/AAA)](https://media.printables.com/media/prints/734837/images/5755001_03a129d4-d179-43cf-959a-eef3b9b9bc27_df25febc-8afd-4e3f-82dc-74820d28b85c/coin-battery-box-000-overview.jpg)
