Liczymy pasujące modele…
This is a scan of a Honda VF750F RC15 instrument cluster. It mostly covers the top surface and the mounting "ears". The goal of the scan is to design a custom enclosure for a Naked Bike conversion.
Fit for RC18D RUNCAM Nano90 camera and analog runcam racer4 camera
Hex Wheel Conversion Hub for RC10, NIX91 or NIX10M. One extra camberlink hole inside original. Uses bearing pack ASC3977 (3/16 x 3/8") + ASC7933 (spacer) + ASC7935 (.187x.50x.196") . Same as B4.1FT, SC10.2, B44.1. Uses B44 rear CVA bone…
Custom parts for mounting RPM73282 (Bandit) rear arms on RC10. Arm itself has 3deg toe-in therefore this arm mount has 0deg toe-in. Both 1deg and 2deg anti-squat arm mounts included in this set. B4-series CVA/CVD bone and wheel needed.…
Similar hub as ASC6365 or ASC7364 but uses big outer bearing. One extra camberlink hole inside original. Uses bearing pack ASC3977 (3/16 x 3/8") + ASC7933 (spacer) + ASC7935 (.187x.50x.196"). Same as B4.1FT, SC10.2, B44.1.
Replacement body posts for the RC10SC7, replacing part #71230 . The original posts often break at the hole just above the mounting screw during a crash. I made these in two parts (A and B) that you glue together Glue parts A and B…
I recently updated my old 2009 Associated SC10 to the new SC7, which is designed to use "shorty" LiPo packs. I didn't want to throw my old, standard-size batteries away, so I designed this tray for them. Fits standard-size 2S LiPo…
Original Quadra-symmetric RC10 project page: https://www.rc10talk.com/viewtopic.php?f=35&t=38327 ----------------------- PRINTING: Print the parts in upright position with the hinge pin and shock mounting holes pointing up. This way pin…
Rear wing for RC10B7. It is heavier than Lexan and intended to add grip in loose dirt. I printed it in 98A hardness TPU at 100% infill.
RC10B7 Front Tower Protector. I printed it in 98A hardness TPU at 100% infill.
Original RC10B2/B3/T3 Graphite project page: https://www.rc10talk.com/viewtopic.php?t=32679 You will get good quality and strong printed parts if you order them somewhere SLS printed in PA12 material. MJF will work nicely also. All carbon…
Screen and sun protector for the DJI RC1 controller. Print in PETG at 30% infill and 3 perimeters. M2 and M4 screws
Replacement part for the front steering of my 30 year old RC10 model car from Team Associated. A few days ago a plastic part from the steering broke and i redesigned it in blender. It fits fine and a first test drive showed no problems.…
I repurposed the excellent truggy wall hanger from @Qrome to fit my old RC10T3. Likely also would fit RC10B3, Team Losi 2wd buggies and trucks, as well as the Traxxas Rustler Printed in PETG w/ 3 perimeters and 20% gyroid infill. Two (2)…
After several weeks of use I lost (allegedly broke in the course of back movement of the boat), part of system of release. I made by it replacement for it. It is 8 mm thick instead of 3mm as at an original detail. Instructions I printed…
Ein Gehäuse für die beiden Ective Geräte: Smart Battery Monitor & RC1 Fernbedienung mit Ladestandsanzeige für Wechselrichter. Es ist genügend Platz unter dem Gehäuse für die Kabelführung. Passend auch für die RC Pro Wechselrichter…
Conventional 16x2 character LCD displays with hd44870 controllers are huge. They get even bigger with a PCF8574-based I2C module attached to their back. Buydisplay.com sell the EastRising ERC1602-4 LCD series with a chip-on-glass (COG)…
Multiboard holder for the Ryobi 18V One+ Dual Port Charger RC18240. Premade holes for the mounting screws are 114mm apart - see back of charger. This holder uses Multiconnect connectors. You will need 2 M4 8-10mm machine screws - they…
Team Associated Original RC10 Steering Linkage. ASC6255 PLA: 2g Fill: 100% Print Time: 20:13
Replacement flap/fin for the Kokido Delta RX 100 (RC16) pool cleaning robot. Since the original website doesn't have an option for an RC16 compatible spare part I made my own (see links below). I printed mine in PLA+ on it's flatter side…
A replacement lid for the classic Daikin BRC1D52 wired remote control.
This is a MK8 toolhead with BLTouch mount for the excellent Voron Stealthburner. VORON StealthBurner (vorondesign.com) It's designed for 2 additional 20mm M3 BHCS to hold the hotend in with heatset inserts in the rear piece highly…
Simple holder for my remote that was always lost. Printed standing, without supports, in petg
Attaches the RC18115 to Multiboard with 4 screws (You will need 4 - actually 2 might hold just fine - of those: https://thangs.com/designer/Multiboard/3d-model/13%20mm%20Small%20Thread%2C%20Flat%20Head%2C%20T-Bolt-974236). I printed it…
This is a template to make a bottom plate for a Klein 1/10 R/C Sprint Car. This template is made using parts from a Rc10GT drive Tran / Rc10 buggy suspension. Original is made from a aluminum plate 2.25mm thick about 10 7/8" x 2 3/4"…
just a spur gear cover i designed you need both pieces for it to work
Quickly remixed my other bumper so I could put a gopro mount on my RC truck for videos of me chasing my daughter around with it. EDIT: Just Realized it needs a nut and stuff for the gopro screw to go into, DOH! Category: R/C Vehicles
First attempt at making a part for my Team Associated RC Race Truck . This is based on the RPM wide bumper I already had. It's also my first print using PTEG and I'm hoping it will take a little bashing before I have to print another one.…
Wydrukowałeś mój model? Zachęcam do podzielenia się wrażeniami/zdjęciami na jego temat w zakładce realizacje/komentarze :) Każda opinia motywuje mnie do dalszego działania ;) Dziękuję :) Pilot walał mi się po biurku, więc zacząłem…
Replacement bumper for RC10B7 offroad RC car from Team Associated. Recommend PETG or more robust material.
Es handelt sich um ein Kühlschrankfach für den Dometic RC10.4T.70_00 Kühlschrank für z.B. Wohnwagen. Die Artikelnummer lautet 289078637 (114B 1 Pcs Türregal).
This is a scan of a Honda VF750F RC15 instrument cluster. It mostly covers the top surface and the mounting "ears". The goal of the scan is to design a custom enclosure for a Naked Bike conversion.
Fit for RC18D RUNCAM Nano90 camera and analog runcam racer4 camera
Hex Wheel Conversion Hub for RC10, NIX91 or NIX10M. One extra camberlink hole inside original. Uses bearing pack ASC3977 (3/16 x 3/8") + ASC7933 (spacer) + ASC7935 (.187x.50x.196") . Same as B4.1FT, SC10.2, B44.1. Uses B44 rear CVA bone…
Custom parts for mounting RPM73282 (Bandit) rear arms on RC10. Arm itself has 3deg toe-in therefore this arm mount has 0deg toe-in. Both 1deg and 2deg anti-squat arm mounts included in this set. B4-series CVA/CVD bone and wheel needed.…
Similar hub as ASC6365 or ASC7364 but uses big outer bearing. One extra camberlink hole inside original. Uses bearing pack ASC3977 (3/16 x 3/8") + ASC7933 (spacer) + ASC7935 (.187x.50x.196"). Same as B4.1FT, SC10.2, B44.1.
I once again broke the steering rack on my rc18b2 buggy, same part always seems to break. I've looked for alternatives, but there only appears to be an aluminum one that goes for 50+ dollars. Needless to say I didn't want to wait the few…
Replacement body posts for the RC10SC7, replacing part #71230 . The original posts often break at the hole just above the mounting screw during a crash. I made these in two parts (A and B) that you glue together Glue parts A and B…
I recently updated my old 2009 Associated SC10 to the new SC7, which is designed to use "shorty" LiPo packs. I didn't want to throw my old, standard-size batteries away, so I designed this tray for them. Fits standard-size 2S LiPo…
Remix of the original model (thanks a lot), splitted for easier print, added air pocket.
ADDON - This is ONLY the top bar with smaller sized holes to fit the RC10B74 and RC10B84 shock barrels. (16.5mm diameter). Download the rest of the files from the original creator.
I found it inconvenient that the charger cord came from the top and the charging lights were on the bottom making them hard to see when mounted on a wall in the default orientation. This minimalistic adapter plate will invert the charger…
Broke one when the RC18T went out of control. Ive created several out of PETG and ABS-CF.
Ive made a few using just simple shapes i think this is still a bit odd looking yet durable i hope i post file correctly i have only tested this in pla so the fitment is correct but unsure how well its truly going to hold up in a crash…
This upgraded SC7 body post design is built to be virtually indestructible. By reinforcing the post with a through-bolt and replacing traditional body clips with a robust screw-on nut, it can handle the hardest tumbles without snapping or…
The front bumper brace (part of the #71231 set) functions as a spring to absorb front-end impacts. Instead of buying the whole expensive bumper kit when only this piece breaks, you can now print a quick replacement. Both options have been…
Based on my band for the Prusa RC3 face shield https://www.thingiverse.com/thing:4268164/edit I adopted this design to fit now to the multiple clones of RC1 RC2 or RC3 face shields which are using an adjusted strap hook geometry. I also…
RC10 Front Bumper Print Settings Printer Brand: Zortrax Printer: M200 Rafts: Yes Supports: No Resolution: 0.09 Infill: 100 Category: R/C Vehicles
Allows you to use modern 12mm hex wheels with the Original RC10 and RC10T Print Settings Printer Brand: Zortrax Printer: M200 Rafts: Yes Supports: Yes Resolution: .09 Infill: 100 Post-Printing Some sanding required depending on accuracy…
Designed a handle for the Dometic camping fridge. You can add the moving handle on both sides, then you can open the fridge also from both sides. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution:…
Tightly fits around the Edifier RC10E IR remote. Fits 5 8x3mm magnets, which allows it to mount it to a PC case or to a speaker, provided you stick a metal pad to it first.
Another Great Model found over at the 3D Warehouse ; ) I've split it up with the intent to print it at some stage. Otherwise the original is listed here also, if you'd like to slice it yourself Print instructions Category: 3D Printing Tests
I print big things and the thought of wasting filament and time because suddenly, in the middle of the night, the filament runs out, is not something I am fond of. So I created a simple filament sensor mod for Voron's CW2 (RC1), using a…
This is a glove remover designed to allow you to take off your glove instead of touching it with your clean hand. Use these devices with your clean hand to allow you to not touch the dirty glove.
REMIX RC1 RC2 RC3.1 shield face protection from Prusa without any hole to do in the shield and compatible with any 150 x 150 printer (medium model) REMIX: https://www.thingiverse.com/thing:4233193…
Replacement for RC10B3 Rear Shock Strut. Print with supports and 100% infill. Category: R/C Vehicles
Fits well. Does not include anti-roll bar pivot. No supports needed. Print Settings Printer: MPMiniDelta Rafts: No Supports: No Resolution: .07 Infill: 100 Filament: HobbyKing PLA Black Post-Printing ============= Run a 1/8th drill bit…
This is a simplified version of the shield RC1, omiting the bottom part. Also, 2pcs have been put together to increase production speed.
This is a derivative of the Prusa face shield , and is a variant of their Release Candidate 1 ('RC1'), adapted to use an A4 punched pocket , which you might find at your local supermarket, and it is very possible that you have hundreds…
This is a slightly altered version of the FaceShield RC1 - A4 punched pocket , which has been altered to be roughly 60% in height and therefore print much faster. It is an indirect derivative of the Prusa face shield , and is a variant of…
Additional holes made to RC1 model for faster printing and less material consumption. Printed headbands are donated to healthcare services in Czech republic by community around DDH Helceletova - Robotárna. Despite how much material was…
Our state has approved RC1 so we can't print the new version. Here are files with 0.2mm & 0.3mm spacing, with or without built in support, and with or without a tab on the front to help with warping. The Prusa label has also been removed…
As with earlier "Slim RC3", the idea is to decrease print time and material use, while still retaining long term comfort for wearers. The RC1 in this case is for those that have smaller print beds that can't accomodate RC2/3 size, or…
This print allows the assemble to use a small build plate size and a 3 hole punch to produce face shields quicker. A West Warwick High School Senior, as part of his distance learning, modified the existing STEP files for both the top and…
Prusa face shield RC1 version without hexagonal holes for faster printing. Bottom reinforcement is not necessary. Please apply all recommended by Prusa precautions when printing and assembling. Sterilization guide:…
This allows 4 RC1 shields to be printed at once, but without the bottom reinforcement. This also includes a 0.6mm nozzle gcode file that has been highly optimized for the Prusa i3 MK3S and prints these four shields in 3h18m Print…
The RC1 step files modified to have no honeycombs, this prints faster and is more durable.
LGB Wagon, nachgezeichnet nach einem originalen von LGB. Für alle Teile habe ich eine Zeichnung erstellt außer den Bremsschläuchen. Diese sind diese hier: https://www.thingiverse.com/thing:4578446 Einige Teile sind auch zum Teil aus…
I like to name it an upgrade of RC1 to RC3. This RC1 plus, make the frontal shield more confortable. Is compatible with Prusa face shield cover. Thanks for sharing, Lorenzo
RC10 Gold Pan Servo Mounts These are very simple but necessary. They replace Associated part Number 6366. NOTE: The originals required the use of 2 washers under the rear servo mount. See the attached picture from the RC10 Manual. To…
Standard R/C Server Mount Posts These are simple Standard size Servo Mounts for custom applications. Useful for Pan Cars, Crawlers, Robots, or whatever. I made them for my RC10, and have used them on a Crawler as well. They have a hole in…
RC10 Gold Pan Rear Wheel 12mm Hex Adapters in various sizes. Allow you to fit cheap aftermarket wheels to the rear of your RC10. I saved them in various size thickness. I am using the 5mm thick ones on my RC10 with some cheap aftermarket…
This is my AeroCam design remixed for the Runcam RC18G replacement lens for the 120fps DJI Air Unit camera. Very simple modification from the original design, I just lengthened and widened the lens tube while keeping the camera body in…
Remix of RC1. Removed holes nad Prusa text. Height changed to 15mm
Using Fusion 360, I made an RC10 Gold Pan model to be a display piece. Used hot glue to put the static pieces together, and 1.75mm filament for joints. https://www.youtube.com/watch?v=RTKm58JL5iU&t=8s
A requested modify to USA version. Hope that this help someone. Thanks for sharing Lorenzo
Battery hold down strap for RC10 B2 and RC10 B3 2WD R/C Buggy Want More Free Designs? Like and comment. Thanks!
Team Associated Electronics RC10 Gold Pan Rear Wheel Adapters for fit RC10L BBS BoLink Style wheels You'll need some M3 screws to hold them on. The length of the screw will depend on how thick your wheel is. 10mm long should work in most…
RC10 Gt Radio Box. Reciever box and lid for RC10 GT or GT2 RC Car Requires 4 little screws for lid.
Original Quadra-symmetric RC10 project page: https://www.rc10talk.com/viewtopic.php?f=35&t=38327 ----------------------- PRINTING: Print the parts in upright position with the hinge pin and shock mounting holes pointing up. This way pin…
These models divide the trays of Perel organizers (OMRC13) into halves or quarters, this allows for more efficient storage of small parts. You need to import the STEP or STL files into your slicer and print them with 0 top layers, 0%…
UPDATE: FInished and successfully cut. Feel free to use these files to create your own toolpaths. or cut your own. Another Fightstick Case this one is a good deal smaller and simpler. Should be easier to make provided you have the tools.…
Wing and shock mounting kit for the NRC Projects 1/32nd replica of the Team Associated RC10 buggy. https://www.facebook.com/NRCProjects/ This requires a small paperclip to be bent to shape as the mount/rear body clip. UPDATED - the wing…
Replaces the top edge plug of the original prusa enclosure to pass through a filament. Useful if you're using a drybox! This was inspired by sajay's design, but I didn't want to use a coupler on the top.…
RC10 front arm mounts with M3 screw mounting. Shock tower screws M3x14. Chassis mounting screws M3x12. Stock RC10 hinge pins. PRINTING: No supports needed. Material: PETG or something stronger. No PLA. Layer height: 0.2mm Perimeters: 5+…
General The 25mm version is compatible with 1 inch cable grommets as shown in the picture below as well as M25 cable glands. But you can use the blank plate to remix your own version if you have different needs for your car 😄 The gasket…
I installed an Runcam RC18G lens as a replacement for the original DJI/Caddx lens on the DJI FPV camera. This is a simple protector for it. Snug fit, and not visible in the image. Print Settings Supports: No Resolution: 0.2 Filament: Any…
With this product you can quickly convert any yard or meter stick into an easy to use set of Vernier Calipers. While not in use, this product is small and easy to store or transport. VarC1 has been modified with C shaped tips for…
Lässt sich einfach mit der Fase unten drucken. In den Öffnungen habe ich Stützen beim Druck verwendet.
Here is a charger for CRC123A/RC123A batteries, using a TP4056 charging module. I'd printed other models but found them too tight to place/remove the cells, so I designed this, giving more clearance and using springs salvaged from an…
A pegboard-compatible holder for the DJI Controller RC1B controller (Compatible with Mavic Pro 2 and 2 Zoom).
I am no longer maintaining this remix and have stopped following along with the revisions for the Umikot. I no longer use it for my prep workflow. YMMV I improved the Umikot mechanics with Thrust Bearings for a smooth, maintenance free…
Hex Socket Cap Screw Remix for Umikot V2rc1 Grip Spin Ring I remix the Umikot V2rc1 Grip Spin Ring to use M3 x 12mm Hex Socket Cap Screw , for other parts just download from the original maker…
The cover is printed with flexible filament (Extrudr flex hard). Other materials will also work, but keep in mind the snap-fits are prone to break. Print instruction: supports: YES layer height: 0,2mm or 0,3mm nozzle diameter: 0,4mm or…
Replacement housing for the internals of the Edifier RC17A/RC80B remote. Uses original PCB, button membrane, battery tray, and IR cover. Snap fit, print without supports. 0.2mm layers with 3 perimeters and 100% infill. Decided to throw…
I made this model as there are currently no available models for the RC-10 GT front shock tower, i did my best to make it as close to the original as possible, it prints with supports, and best at "super" resolution (.12mm layer height)…
Ryobi RC18120 charger mount with integrated hooks for Skadis boards, emphasizing strength and functionality. Printed in PETG on its side for hook durability, though this necessitates support use, affecting finish quality. Print…
This solves for the odd annoying geometry of this charger so you can mount it to the wall, like most of the other chargers allow. It sits nicely without any kind of adhesive but if you want a more secure solution, double sided tape or hot…
