Liczymy pasujące modele…
This is a cup holder insert for a 2021 Subaru Forester (and possibly other Subraru models too) that will fit a 32/40 oz hydroflask water bottle (or other similarly sized 91mm diameter water bottle) without blocking the other cup holder.…
Very simple but works great.
This gas cap holder is designed for a 2011 Subaru Forrester but may fit a few other model years. The original lanyard on the cap broke so I wanted an alternative means of holding the cap. Let me know if it works for your Subaru model.…
Phone holder that hold with gravity to the side of the center console. Should work on all Forester of this model, so the Forester from 2019 to 2024 (so far). I found that my phone didn't fit the center console, and I didn't want to use a…
Safety warning Do not use consumer-grade/desktop 3D-printing for this application unless you anneal the prints in an oven. Industrial grade 3D printing may be OK but Laser cutting or CNC milling HDPE plastic up to 12.5mm (1/2") is best.…
I've designed a speaker adapter for mySubaru Forester SG so i can mount some 6.5 inch (165mm) aftermarket speakers.
Remix of adrians design to be used with N scale, in my case Minitrix. Uses a M3 Nut and Screw. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: [ Generic PLA…
This was created in Fusion 360 from a 2d piece of art I found on the internet. Slice it at 0.2mm and each color change will fall exactly on a new layer. Throw in an M600 command anywhere you want to change colors and print away. These…
These will plug into the seatbelts in the back to stop the alarm from going off. WEAR YOUR SEATBELTS. This is only intended to stop the alarm when you have something large in the back seats, like a dog. DO NOT USE THIS TO BYPASS FOR PEOPLE
Instrument Panel Cover for Subaru Impreza GC and Subaru Forester SF, fully compatible with the 66813FA000 item. It comes with STL, 3MF, and also STEP files for customization.
Hood support clip for 2001 Subaru Forester. Two versions are available: One that mimics the original where the bar clip and body clip are offset A simplified clip where the two parts are aligned vertically. Print Settings Rafts: No…
Not tested yet Category: Other
Find 3D-Printed RC cars here.
A quick modelling of the USB and AUX port found in many Subaru cars. A customisable blank version included.
This is a cup holder extension modeled for use in my 2007 Subaru Forester to hold a 1L Nalgene water bottle. This should be compatible with 04-08 Foresters, and will likely extend to other Subaru models, as it's unlikely that cup holder…
Relatively basic adapter to mount newer LED fog lamps to the factory locations in SH Foresters 09-13. I used a pair of washers and a flange nut to act as a spacer between the back of the adapter and the vehicle side mount to set the…
The Design If you're the proud owner of an older Subie, you know that having fluids on hand is just a good idea. This little cubby in the trunk is the perfect size for an oil quart, a pair of gloves, etc. but things are always sliding…
I made this about a month ago when the driver's side (you could mirror the model if needed) internal door handle on my 2003 Subaru Forester snapped one Sunday morning. At the time it was by far the most ambitious model I had attempted,…
Hi! I made a phone mount for my 2000 Subaru Forester, its made to fit Redmi note 11 pro with a port for charging. I don't know if it fits any other phones as good ;). Its inteference fit but some glue should be used. The mount is held…
With the help of Chunks3D, we were able to size and modify the model to fit my car's center wheel caps. We upgraded the parts to stainless steel variants on Amazon, used 608 2RS Ball Bearings, added threadlocker to screws, and double…
Emblemat Sybaru Forester Connected
door plug for subaru forester, i made it for forester of 2013 year.
Model of Subaru Forester ll generation Dimensions Length: ~ 38mm Width: ~ 30mm Height: ~ 1.8mm Print settings Nozzle 0.4 mm Layer height 0.2 mm Material PLA If you want to see more of my Subaru projects, check out my profile !
Removable centre console divider for the Subaru Forester SH 3rd gen. Modelled from measurements from an original part. It isn't 100% accurate, but close enough to be used as a replacement for a missing part.
Definitely print this in PETG, on its side, and with supports. You want the layers to run all the way through the hook and vertical walls of the base. I used supports with minimal blocking (see picutres). You really don't need to clean…
Remix of this silencer but including slots to hook a badge holder so that your silencer doesn't take off on you.
I searched and tried some holders and finally I had to make my own :) Enjoy Cup Holder for Subaru Forester XT Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: as you like…
Struggled to a find a commercially available fascia to adapt a 2DIN Sony XAV-AX1000 to suit a Subaru Forester SJ 2013-2014 with the Harmon Kardon headunit. This one does fit these exact models, unsure if it would fit other models or…
It never really felt right to put my round cup into the square cup holders in my Subaru so I decided to make an insert. I will probably tweak the round portion to work with different sized cups a little better but this version works great…
My new-to-me used 2023 Subaru Forester was missing this part, so I decided to make one. From what I have read online, the following appears to be true : This should fit 2020 - 2024 model years Some (many?) people don't like the the…
Subaru Forester SK Angled Tweeter Bracket Dash (Midrange) for the alpine S2S69c
UPDATED with v2 - June 9th, 2023 This is simply a phone cable guide that slides onto the HVAC vent in my 2023 Subaru Forester. I needed something to keep the cable out of the way of the infotainment screen because the cable would block…
The stock sliding cover was slipping and wouldn't catch the rear part anymore so I made this one to have it be functional. # Shameless begging If this helped you in anyway and you feel like tipping: https://ko-fi.com/eduarbio15
I recently got a wireless carplay adapter for my Subaru Forester 2020, wanted to add a magsafe mount for my phone. The cubby under the infotainment has never been quite right for setting a phone down, this magsafe puck keeps the phone…
I needed a set of centercaps for some Subaru rims that I just picked up and while I could buy them it was easier / cheaper to print some. I put together a number of different options while I was at it. The original for this rim had a…
Model of Subaru Forester l generation Dimensions Length: ~ 38mm Width: ~ 30mm Height: ~ 1.8mm Print settings Nozzle 0.4 mm Layer height 0.2 mm Material PLA If you want to see more of my Subaru projects, check out my profile !
A printer friendly version of pimaster's 2004 Subaru Forester Bonnet Stay Clip Category: Automotive
I designed this for my 2014 Forester based the design I saw from EJ @EJ_558281 for their 2015 Subaru Outback. (See EJs at https://www.printables.com/model/418710-2015-subaru-outback-gps-mount). I expect this will fit some other models.…
a steeper angled part (50 degrees) to improve the directionality of the tweeters, with the sweep starting on the bottom surface to prevent touching the windscreen. best to print this in PETG or ABS, as with direct sun, it could get quite…
Printed with fuzzy skin for grip
Dummy piece to cover the button hole in back seat of Subaru Forester. Category: Automotive
Use a doble sided tape to attach it.
Full 3D printed replacement for the factory lever assembly NOT MY DESIGN Mirrored from original design to fit RHD cars Original LHD model: https://www.thingiverse.com/thing:4611616 Assembly is pretty self explanatory once the carpet has…
This pin replaces the OEM pin that holds the side skirts to your Forester. These are prone to breaking, especially if you live in colder areas. Category: Automotive
I designed an oval base to fit a 2006-2007 Subaru Legacy Outback Oval emblem (link below). I used the base to zip tie it to my 2012 Forester Sport Grill. Worked absolutely perfect, and looks great (factory, even). Not sure if it will work…
Adapterring um 165mm Lautsprecher in der Originalöffnung in der Tür zu verbauen, beim Forester SF. Originalgitter muss ausgeschnitten werden. Original Kunststoffeinsatz für den LS bleibt drin, 28mm zusätzliche höhe. Ich habe Focal PS165F…
a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…
I didn't like the look or price of any of the phone mounts available for this era of Forester so I made this. It clips onto the center HVAC duct and only blocks a little of each outlet. The install is permanent (since it seems impossible…
Because these clips always break, i've tried to copy them and make them “Stronger” in the V2 variant. The V1 fits perfect. Best is to print the clips on their back (So far gave me the strongest result) Pictures etc will follow
Replacement for the original waste container of Miele coffee machines. Original article number 09458490. I always had the problem that the coffee waste didn't fall all the way to the bottom because of the bar in the original container.…
a bracket for the S2s69c 3" midrange driver for a subaru
Exhaust hanger for a 2006 Subaru Forsester. Hanger holes are 53mm apart, and 15mm in diameter. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .16 Infill: 80 Filament:…
This is a remix of a Jeep car cupholder coaster by William Ward. I added the Subaru logo and the Forester logo. I made this for my Mother-in-law and have been unable to make sure it fits properly. So, you might need to adjust the scale a…
Subaru Forester SJ Cover Catcher Subaru OEM PNs: 94053AL100; 94053FJ000 Print inclined with organic supports, using the print post in the model itself. This reduces supports and keeps visible surfaces clean of support remains. Print post…
Requires a 10mm diameter spring! (same as the original if you still have it) Subaru Part Name: Stopper Tonneau Cover. (Right, Black) Part Number: 65577AJ00BVH, 65577AJ00AVH NOTE: The Subaru website lists this as a right-side part, but…
Replacement badge for your Subaru vehicles! Forester Crosstrek
Printed in Inland Black Tough resin. Might work with FDM but I found resin to be easiest to capture the tiny features with accuracy. Provided a pre supported STL with two copies for resin, and an unsupported with a single copy of the…
A 240mm x 150mm bar sign featuring Old Forester Straight Bourbon Whisky. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. There…
A gauge mount installed on the center ventilation, for the Fueltech WBO2 Nano Wideband monitor, but can be modified for any other situation.
This is a gauge pod for the 09-13 Subaru Forester. that fits into the cubby area. This model was built off a .DXF that was shared to me by Carlos Schrei and i made it 3D printable. Added the Forester logo too.
Installs into cutout in top right of cubby hole of a 2009 - 2013 Subaru Forester. Fits USB port on Amazon: https://a.co/d/3aORGUU
This was designed to replace the factory clock in the overhead console that often fails in 1st gen foresters with two switches, such as the following: https://www.jaycar.com.au/spst-mini-rocker-switch/p/SK0984 The design hasn't been…
This model will let you mount a Joying single din touch screen head unit in a 1997 - 2001 Subaru Forester or Impreza (that has a forester dashboard) on the dashboard. The original radio locations in these cars is not very practical,…
Axle seal driver for a 2012 Subaru Forester. 4EAT Automatic transmission. Not sure if it would work on Manual but I assume due to the diff location. May also be compatible with the outback or other foresters (not 100% sure, check your…
This model is a replacement for the stock foglights on 2006, 2007, 2008 SG Subaru Foresters. I made them for my track-ready forester so that I can plumb brake ducting to the front rotors. These fit into the factory foglight mount points.…
Держатель пламегасителя 13720-91J30-000 для лодочного мотора Suzuki DF4, DF5, DF6. Flame arrestor holder 13720-91J30-000 for the Suzuki DF4, DF5, DF6 boat motor. Print Settings Printer: Anycubic Vyper Rafts: Yes Supports: Yes Resolution:…
The reclining handle cover was missing from my SF Forester so I printed one Note: in the photos it shows a hole, however it was misaligned from taking inaccurate measurements but I found that it fits on good just with a friction fit
Needed one, so made it :)
These rails are fit to store this stainless steel trester bucket from Amazon below your kitchen countertop. So you can always have it ready but it is also out of view while you do not use it. The rails leave about 2-3mm of air at the top…
Simple fork mount for a 12x100 thru axel to mount on the center headrest of a ~2010 Subaru Forester or similar. (10mm headrest posts 95mm spacing) **Update: loosened tolerance a little on the headrest portion. Apparently 40+ people…
Newest version on my website. ===> THIS STL IS FOR PLA <=== If you want to print it in ABS (which I would recommend because of its higher temperature resistance) you need to scale it by 101.6% in your slicer because it will shrink as it…
Just made a simple Forester logo from a Reddit request. Nothing special, just a Forester name badge.
Small bumper for the liftgate of a 2010 Subaru Forester. Meant to be printed in TPU, print on the heavier side, but 100% doesn't seem to be warranted. 6 walls and 20% seems adequate. YMMV. May fit other models, I haven't checked. Edit: V2…
Coin holder for your Subaru Forester SH. Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: No **Resolution:** 0.16 Infill: 25% **Filament:** 3D Solutech PETG Red Notes: Easy print, fits in the little slot…
I was tired of there being a single large pocket in my center console. I will probably use this as a starting point for additional versions but the interfacing geometry that mates up with the existing console are all in the correct place.…
These parts are modeled after the 2006-2008 Forester mount and bolt/visor-compatible with many models across Subaru’s lineup, but may not visually match or fit snugly in all cases. This was my best-selling model on Etsy, particularly in…
Print with supports in PETG. Suits Subaru Forester SH 2009–2013.
Needed a place to keep coins for parking meters. There were a couple of designs available but they included pennies which I don't need and were a bit tall for what I was looking for. This mounts in the little pocket next to the square cup…
Replacement part for the sliding part in the center vent. The whole vent section on the Forester can be popped out by using a screwdriver to pop up the clips above the screen, on the sides and and below the vents. Once popped out you can…
This is a 3D printable fog light hole cover designed for the 2008 Subaru Forester. It is made as a replacement or custom cover for the front bumper fog light opening. The model features a round outer frame with a slotted grille-style…
This part replaces the foglight non-equip filler panel to add an air pass through. For Engine intake or brake cooling ect. I even had the idea of putting a trans cooler behind one. It can be a blank off a regular mesh air pass or ducted…
I got frustrated with how poorly my 24oz Bubba coffee mug fit in my wife's car so I designed an adaptor. Hers is a 2018 Forester but it probably works for 2014-2018 model years and possibly other Subaru vehicles. Support structure…
Adapter rings for mounting 6.5 inch speakers into the factory locations. Different adapters are required for the front and rear speakers due to the angled axis of the front speaker locations. The single front ring can be flipped in your…
Exhaust hanger for a 2006 Subaru Forsester. Hanger holes are 107mm apart, and 15mm in diameter. I needed a longer one for an aftermarked muffler and tow bar, so I made this and printed in TPU, 10 months in and it's held up great. Photo…
This model is excellent for you if you don't want to spend big money and time to replace a simple plastic part. Print using ASA or higher temperature/weather-rated filaments. I recommend doing sanding and acetone vapor smoothing to get a…
1/1/2025: Added .obj and .step files in case someone wants to modify it. This is a mounting stud (clip) for a 2006 Subaru Forester tail light. They easily break off when removing the tail light from the vehicle. I took RCAholic's design (…
remix of Helio Ribeiro @caciquesf5_1261957 instrument panel cover TampaBotãoTabelierForester-vazio v2 blank modified to suit generic switch off AliExpress for my hardkorr fog lights included are freecad file so you can measure your switch…
This arrester for German HERAS rolling gates is a replacement part for the original component. After a few years the original one was torn appart and does not work anymore because the security pin of the gate was able to slide out on its…
I needed a replacement knob for my wife's rear gate in her Subaru. The thumb knob busted, and I realized it was just a nut in a blastic knob. I found this(the original knob I based this off of) to be the best I tried, with the best…
I needed STI version of Forester for a gift, but it wasn't on any website. so i took ai version from site and works on it
The cover-gusset door for Subaru Forester SF5 (94251A but, looks like a general code for this part in all Subaru cars), it can be mirrored and also has a .step for mods Printed on ASA-GF, but any filament that can whitstand 100ºC (good…
Wir mussten unsere De'Longhi Primadonna Elite zerlegen, weil ein Teil abgebrochen war. Beim Zusammenbau ist uns leider ein Fehler unterlaufen, sodass Restwasser nun in den Tresterbehälter abläuft. Um die Maschine nicht noch einmal…
Coffee Knock Box housing Kaffe Abschlagbehälter Gehäuse 166x153x100mm https://www.aliexpress.com/item/1005006853887848
I have been looking for a Cell phone mount for my 2020 WRX for a while now. I have tried everything from the Suction cup to window, clip on air vent mounts, CD Player mounts, and one that Clips on to the Gauge Bezel cover. They are always…
A replacement plate for the 2026 base model Forester center console to add a wireless charging pad. The design was made to fit this Wireless Charger Car Charging pad: https://amzn.to/4lQc45m I also used a USB power supply to power it…
This fits into the small tray in front of the cup holders to hold 1 or 2 phones upright
fits in passenger seatbelt clip. silences chime
This is a replacement bracket for the visor anchor. It is 2 piece with 2: 4-40 screws/nuts (sorry metric guys, I had them on hand). The two piece was the easiest way to preserve functionality of the swivel. I think the original design is…
![Subaru Suspension spacer lift-kit anti-sag templates [Legacy, Outback, Impreza, WRX, STi, Forester - various years 1990-2025]](https://media.printables.com/media/prints/44b44ccf-34bd-4dcf-aaf0-5ba3365ce514/images/11800929_ef583532-e08f-4393-a7b3-1f879f95504b_1922b272-25b2-40f6-acbe-62002f49281c/screenshot-2026-01-21-185927.png)
