327 modeli
This is a simple dosing cup for the Sage (or Breville) Dose Control Pro or Smart Control Pro coffee grinder and fits in its 58mm portafilter-holder and the portafilter itself without making a mess. It can be printed in PLA without any…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
Vytvořeno a zkoušeno na kávovaru Sage BES875BKS (pro některý trh pod značkou Breville). Pravděpodobně by mohlo fungovat i pro jiné mlýnky do kterých se dává páka s průměrem 54mm a spínáním zatlačením na páku, ale nemam vyzkoušeno. V…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
the Breville Cafe Roma uses 51mm portafilter basket. This model allows you to dose grounds into a cup with a detachable funnel. The dosing cup then fits nicely into the 51mm portafilter basket. The funnel also has a circumferential groove…
Wydruk około 4,52 €–5,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This clamp prevents rattle from the drip-tray on the Sage/Breville Bambino plus. Easy to remove for cleaning the drip-tray. I printed this in PLA
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
I use my Breville dual wall filter basket on my aeropress to give more of an espresso type coffee. Give it a go. You might know this from Joepresso . This is the same thing, but for a 54mm basket and designed to be 3d printed with no…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview A compact, hexagonal espresso knock box designed by hakkaisha for home baristas. It provides above‑average capacity in a space‑efficient footprint, with a shallow angled opening for clean, comfortable knocks and easy emptying.…
Wydruk około 33,94 €–41,48 € nettoWstępna wycena jednego wariantu
Most users of the Breville Barista Express espresso machine get frustrated when using the built in grinder, as the coffee grinds tends to spill out of the portafilter. This dosing funnel attaches to the 54mm portafilter to provide…
I waited for a month for the original author to respond wether there will be a V2 for 54mm portafilters, and then decided to make my own. This is not a scaled model, but a re-computed one. Please follow the original Umikot instructions…
This is a quick remix of the dosing funnel by Josh Hartman that fits 54mm portafilters with 3 tabs. Depending on how tight you want the fit, you may need to scale the print to 99% or 98%
Advanced users of the Breville Barista Express espresso machine likely don't fill up the stock bean hopper, but instead only grind enough (carefully weighed) beans for a single espresso shot. The stock hopper has an issue that beans fall…
Simple tamping station for Breville Barista Touch 54mm portafilter. Might work for other 54mm portafilters, but did not take different heights into account. Includes storage space for funnel and tamper. No supports or special print…
Water chute for Breville Barista Express / Express Impress espresso machines. This sits on top of the machine and allows easy access to fill the rear water tank. Works great if your machine is under a cabinet. VERY very new to 3D modeling…
Single Dosing tool for the Sage / Breville Smart Grinder Pro. Maybe it fits also to other machines from Sage / Breville. It minimizes the dead space of the machine to +/- 0-0.1g. Installing Install part1 like in the picture (it prevents…
For the best look print the 3 pieces separately and assemble them (in the picture). Depends on how accurate your printer is. May need some filing and mallet action to encourage the handle to fit. Otherwise, print the 1-piece with support
Get inspired by Crema Coffee Steam Lever but don't want to spend $40 and take apart my new Breville Barista Pro espresso machine. I designed the snap on the lever which no tool is required for installation. Due to its snap-on design, I…
Breville / Sage Barrista Grinder Gear. Supported models: Express (BES875) - tested Touch (BES880) - confirmed by others These are not available as a separate spare part from Breville (Sage), but are the first to fail if the grinder gets…
Niche Zero holder for Sage/Breville or La Marzocco 58mm portafilter. Designed to stylistically match the grinder while still seamlessly integrating the stock dosing cup and holder. It is an elegant way to grind directly into a portafilter…
Remix of newman13f's model with a wider hole which fits stock 54mm portafilter of Sage/ Breville Bambino/ Bambino Plus. newman13f does not seem to have a printables account though.
I was thrilled by Reven's Portafilter holder for Baratza Encore but I found my portafilter was too small, tweaked the design of the holder piece to fit it. Go get the other parts from their project!
A dosing funnel specifically designed for the WDT (Weiss Distribution Technique) that is compatible with 54mm Breville/Sage portafilters. This funnel captures stray coffee grounds that would otherwise be lost during grinding. Key features…
Compatible with any 54mm basket of Sage/Breville Barista Express, Barista Touch and Barista pro enjoy
This was inspired by this design: https://www.thingiverse.com/thing:4671580 I designed it without the tabs on top with an extended tab at the front to catch on the bottom of the portafilter holder on the Breville Smart Grinder Pro. The…
Remixed from another model on Thingiverse, I made a number of small changes to improve on the design. This model still uses the original top part for the drip tray. In the previous design, drips would be trapped in between the tray cover…
Simple base for the portafilter to have a fixed position for tamping your coffee. It fits specially for the Sage / Breville barista express portafilter with a basket size of 56 mm. The top opening has a size of 61.3 mm.
The Breville Barista Express we bought had the grinder break down after a couple of years of use. The original gear is an engineering grade nylon. About every 3-6 months the gear I've 3d printed becomes stripped and I reprint one of these.
I recommend every hobby barista, especially those who are just starting out, to use a leveling tool. I designed this one for our SAGE Barista Touch. It is based on the original dimensions of the trimming tool from SAGE and fits perfectly…
The perfect tamping station with a non-slip TPU bottom (glue on) for stability. Designed at the ideal height for stock Breville/Sage Barista Express portafilters (53mm). As seen in the pictures, the filter rests on both the 3D-printed…
Very minimal holder/tamping base for 54mm Breville Barista porta filters. Should also work with other similar porta filters of the same size, though I have no t tested. Prints without supports.
The purpose of these modifications was to reduce the angle of the overhangs on the bellows segments and also make the walls very thin to help with tearing due to the material stressing itself. It also has the added benefit of moving more…
Grinder of the coffee machine Breville BES860 does not work due to wear of a gear inside gearbox. So I made a new gear to replace the worn one. If possible, it is good to increase the density. But consider printing time. A pin with a…
Seen them online but cannot pay $40 for a print when I have a printer and can draw :D I did a couple of test prints in PLA before using TPU. Even PLA (pictured) ones seem to fit and work just fine. Enjoy.
Simple stand for portafilter. I use it for all work with portafilter (grinding and tamping) Also useful for small cups during brewing when you turn it upside down. For honeycomb texture use mod file Link for funnel
The text is embedded in the part, split to parts if you want to color them.
I needed a dosing cup for my Breville. This one fits in the grinder and you can push the button to start it WITH the cup. Makes for better use of my grinder for other brews and fluffing the grinds before dumping them in the portafilter.…
This is a simple dosing funnel for 54 mm portafilters (Sage/Breville). Compared to other available models I tried, this one got longer sides to avoid falling off when knocking the portafilter.
Funnel for filling 54mm portafilter with coffee to prevent spillage. Tested with Sage/Breville portafilter. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm or 0.3mm Infill: 20% Filament:…
Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the lug-flanged base files with cutouts for three lugs. This is for compatibility with the Breville Barista Max's portafilter. See the…
Organizer for 5 tools for Barista Pro. I have model BES878BSS and I don't know if it works for other models, but if you interested, we can try to work it out. You can put it on the warmer surface. I use it for next 5 tools: 53mm Coffee…
4 different variants of the 54mm Tamper Station for the Sage / Breville Bambino (Plus) available. The WDT-Tool holder fits with the following product, which is available from various manufacturers on Amazon: https://amzn.eu/d/81th8Xx
This espresso cup riser stand is designed to sit securely in the drip tray of selected Sage / Breville espresso machines, raising smaller cups closer to the portafilter spout for improved shot control, reduced splashing, and a cleaner…
I could not find a dosing funnel for my Breville Bambino Plus 54mm Portafilter (PF) which fits into the PF holder of my Smart Grinder Pro. The ones I have tried are too tall so I had to tilt the PF forward a little just so it goes through…
As there was no 54mm version of v2 Umikot I decided to remix it myself. Tested it on stock Sage Bambino Plus double portafilter and a cheap basket I got with a bottomless portafilter. Used the Umikot58 - Mech V2 , Umikot58 - Spin Ring V2…
rises the cup by 35mm diameter of the zylinders at the bottem is 10,75mm distance between the zylinders at the bottom is 32mm You need 2x M4 countersunk bolts (DIN 7991) with a lenght between 12mm and 20mm. If it fits other…
This is a parameterised model to extend the bean loading capacity for a Breville or Sage espresso machine. Included are both the stl and fusion 360 file. I suspect that this fits all Breville machines, but I could only test it on mine. I…
Simple Portafilter Holder for stock and 2nd party Open Portafilter for Sage/Breville Bambino. Printed on a Prusa Mini+, 0.6mm Nozzle with Extrudr XPETG Anthracite
Aufsatztrichter für den Siebträger der Breville Prima Latte II
Breville Tamping Stand for 54mm portafilter
Let's be honest, if we are in the hobby of espresso and 3d printing, we love tinkering with our equipment. Maybe even more if we have a breville dual boiler planning or have done a “slayer” mod to it. I think that the white skådis holder…
Breville Espresso Grinder Gear Replacement Part
Rather than buying one, print your own funnel to make sure all the grounds get in the portafilter. Use a food safe material and fill the print with perimeters. Should not require supports.
Low profile funnel to direct water from steam wand into the drip tray, designed for Breville/Sage Bambino Plus Espresso Machine (BES500) Remix of original by AlmondTofu:…
UPDATE: I have made a much better version of this I recently got a Breville Bambino Plus and a third-party bottomless portafilter. I couldn't find a suitable tamping station for it, though, so I decided to design my own. Here it is, in…
6/14/23 - Added Portafilter Funnel with 3mm holes for magnets For those still intent on using the built-in grinder of their Oracle / Oracle Touch, I present this bypass system. The portafilter holder was designed to hold a bottomless 58mm…
Trychtýř se zámkem na prodloužení páky, aby se mletá káva nesypala mimo.
A simpler option for those interested, this dosing cup lets you use the built-in grinder of the Breville (Sage) Oracle without having the portafilter locked in. This allows you to prepare your puck without using the auto-tamp feature, so…
Breville Tamper 3D-Printed Replacement Part Overview Is your Breville machine missing its tamper, or has the original one seen better days? Look no further! This 3D-printed Breville Tamper is designed to match your Breville espresso…
Disclaimer This hopper does not have much finger protection when installed. It is also easy to disengage the grinder lock when installing/uninstalling the hopper. If you choose to use this, please only install/uninstall it with the…
Dosing funnel for the 54mm portafilter used on Sage/Breville espresso machines. The design utilises Ø6x3mm magnets that are glued into the 6x holes. This keeps the funnel secure to the portafilter whilst using a WDT tool and storage on…
Introducing the ultimate 3D-printable tamping station designed specifically for 54mm portafilters! Elevate your espresso experience with this sleek and functional accessory. Super durable and easy to modify/remix. Print in PLA with .2mm…
Remixed from the original model by Simbungu: https://www.printables.com/model/80817-breville-barista-express-single-dose Refined look Added magnetic cap! Cap can be used to measure the beans! Feeder is separated as inside and outside to…
UPDATE v3: In the new version, both sides of the holder are slightly slanted, and the central bars are now removed for better drying. The v2 drip tray is compatible with the v3 holder. --- UPDATE v2: I've added a new version with drip…
Holder and Funnel Designed to work with: - The Breville Smart Grinder Pro - A 54mm Portafilter/basket Custom designed the holder. Adapted the funnel from: (just extended the height to work better with the holder i designed).…
I store most of my accessories on the cup warmer of my coffee machine. So it was always full of coffee grind. Since it is kind of difficult to clean, because of the ribs, I designed this little tray so you can remove it for cleaning.…
A no-mess dosing funnel for use with Breville/Sage Smart Grinder and 58mm Portafilter. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Generic Anything Foodsafe Any…
Breville includes a so-called “razor” tool with the Bambino Plus for leveling the amount of coffee in the portafilter. Being cheapskates, they leave it out of the smaller Bambino model even though it's a few cents of metal material. This…
This may be a very niche item, but if it helps someone, that's great. My Breville espresso machine's steam wand is not exactly centered above the drain hole leading to the drip tray. Nitpicky? Maybe. First world problem? Definitely. But…
Fits Breville/Sage portafilters with 54 mm diameter. Remixed the great original tamping station with added slot for metal mesh filter, because I hated to have it laying around and not having its own slot. It should fit any normal metal…
A simple dosing cup for 54mm portafilters. It fits the Sage / Breville 54mm portafilters and also sits perfectly on the Sage / Breville Smart Grinder Pro Tray. Printed mine without supports in 0.2mm Sunlu Matte Black
I designed this to hold on a vertical wall or on the side of the machine. works for 54mm portafilters with 3 prongs. there are holes for 8x3mm round magnets. version in pictures has 5x2mm ones and was not strong enough to hold on the side…
Remixed the original tamping station with added distribution tool stand and original Breville funnel mount
This is a hopper extension that fits Breville Barista espresso machines. I always found it annoying that I could not fit a full bag in my machine and have to constantly fill the hopper. This hopper is designed to extend the built in…
This is a stand I designed for the Breville 58mm Bottomless portafilter so it is easier to tamp it. Category: Kitchen & Dining BE SURE TO PRINT WITH FOOD-SAFE MATERIALS AND A FOOD-SAFE NOZZLE LIKE STAINLESS STEEL
Expresso tamping station that fits 54mm portafilter and comes with a tray and storage
The metal grate on the Breville Bambino Plus drip tray does not sit tightly on its plastic reservoir, so it rattles around while the coffee machine is running. I've designed some small shims to attach to the plastic reservoir that keep…
Tired of throwing tiny amounts of beans into your barista express? This is the print for you! The opposite of the single dose hopper ;) Prints in 4-5 hours using 0.8mm nozzle. Openscad file included so you can make yours even bigger.…
Breville 54mm portafilter holder for DF64 / DF64E / DF64P grinder. The height of the portafilter as measured from top of the portafilter ears to the bottom must match up otherwise the portafilter won't sit in place. I've this one…
An easy to print and assemble replacement knob for the Breville Cafe Roma espresso machine. The original knob is notorious for breaking off (thin plastic) and Breville just would not send us a replacement part, even if we offered to pay.…
A cap that blocks the grinder on a Breville Barista when the hopper is removed.
The most important upgrade for a Breville/Sage Barista Express—trust me! This is a remixed version of the popular 54mm portafilter funnel designed for Sage/Breville Barista espresso machines . The funnel helps guide coffee grounds into…
Title: Single Dose Hopper STL Model for Breville Oracle Coffee Machine Description: Introducing the Single Dose Hopper STL Model, a must-have accessory for coffee enthusiasts and owners of the Breville Oracle Coffee Machine. This…
Why spend $20 on a dosing funnel when you can simply print one at home? This custom-designed dosing funnel is made specifically for Sage coffee machines with an integrated grinder. Thanks to its innovative interlock system, the funnel…
This is a 54mm coffee funnel that allows you to fill your sieve tray without getting everything dirty. Please check the dimensions depicted on the attached pictures, since I have got the feeling the Sage's 54mm may not fit all…
A simple dosing funnel for use with the Breville ESP8XL Cafe Roma 51mm portafilter. The outer ring of this model fits around the portafilter locking tabs to center it so I am unsure how universal this model will be with other 51mm…
One of the downsides of how small the Breville (Sage) Bambino is the fact that a normal sized scale won't fit on the drip tray without slipping around. I designed this plate around the Timemore Black Mirror Scale, but it worked with a few…
The Ultimate 54mm Funnel for Breville Portafilters This is a 54mm dosing funnel designed to fit Breville portafilters, helping to reduce mess and improve workflow when grinding and tamping. Key Features: ✅ Custom built-in supports for…
Split and correctly orientated STL files for the Umikot 54 mm/Breville version. I have not made any changes to the models , only re-organised them to remove any confusion in printing them (e.g. if using a unfamiliar 3D printing service).…
I designed this Espresso Packing Cup for our new Breville Bambino Plus 54mm Portafilter. Works great and supports the portafilter while packing the espresso. I have included SolidWorks, Step and STL files. Printed with carbon fiber /…
I usually buy my beans in a one pound bag. The Barista Pro's hopper holds less than half of the bag. A 45mm extension expands the capacity and still fits under my upper cabinet. I have included a single color option in both STL and 3MF.…
This dosing ring or funnel is specifically designed for the breville 58 mm portafilter. It locks into place using the metal tabs on the portafilta. Designed to be not too ugly with a shape that fits in with other coffee equipment.…
Had many issues actuating the steam with my left hand while I was holding the milk cup with my right. I made this that sits at 45 degrees when in the middle “off” position, Vertical for hot water, horizontal for steam. I printed this with…
A more sturdy portafilter holder / stand for any 54mm portafilter with an WDT tool holder and a puck screen holder at the back. I've tested it with the Sage / Breville Barista Pro (54mm) portafilter and the Sage / Breville Bambino Plus…
Funnel to help transfer ground coffee into your espresso machine portafilter with less mess. This uses the design at https://www.printables.com/model/164943-espresso-funnel-parametric , modified to fit my Breville Bambino's portafilter,…
I remixed the existing model to attach the sides to the main body for easier use and less assembly. You need to print the grounds tray from the original model. I recommend also printing a funnel, although I haven't yet. I'm also not happy…
Same as the original. Just removed the logo and changed the orientation to be the best printing angle right away. Use 6mmx3mm magnets and glue.
Juste a quick remix of @William_123957's model to remove the "Sage Blade" slot.
Tired of emptying out your Nespresso waste bin so often? This bin replaces the factory bin with one that doesn't have a base, allowing the used capsule area to expand into the space below and fit another 2 capsules. This model fits with…
Long needle version of the 54mm Umikot V2
From original model: "The Orginal Sage Barista Pro Tamper is too small. Channeling problem! With the adapter no problem anymore. The first line is not a layer shift but these 5.5mm lines for tamper depth." My version adds a ripple pattern…
