Liczymy pasujące modele…
Alco RS3 Locomotive - Compatible with Dragon Railway This is a functional Alco RS3 locomotive, compatible with Dragon Railway. To assemble this model, you will need 12 M2x6mm screws. To make this model run you will need 4x N20 1000 RPM…
A 19-inch, 2-part, modular rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't…
The switch itself is 1U-sized and even comes with hardware mounts for a 19" rack installation, but the 10" rack mount accessory is extra. With this mount you can utilise one of the included rack mount ear brackets to mount the switch to a…
DJI RS3 & RS3 Pro Gimbal holder for IKEA Skadis Pegboard using T-Clip system for best quality and strenght. It can securely hold DJI RS3 and RS3 Pro with the battery grip. Designed to be put as in the photos to make up for the slight…
Please print firstly only one testing knob and optionaly scale. Dimensions of your holding geometry can be different. You can measeure your holders first and than scale accordingly.
Allows for mounting of a MikroTik CRS305-1G-4S+IN almost anywhere using double sided sticky tape. The posts of the print go into the bottom of the router and then double sided tape goes on the bottom of the flat piece. Stick it where you…
Audi RS3 logo/badge I have mounted the logo on the front lip of my Audi Rs3 with double-sided adhesive tape. It is a remix of: Audi RS3 keychain customizable square color by CitronKipik - Thingiverse I printed it with my Bambulab X1C with…
Custom cover to improve Microtik CRS310 cooling and meaningfully reducing noise by replacing the original 40mm DC fan with a pc case 140mm one.
Added a handle to Danissl's tensioning tool for ease of use. Prints with the flat part of the handle on the bed. No supports needed. I printed these with 5 walls 25% infill but thats complete overkill.
Hardware needed to install Cap/Button Screw M4x6 - 8pcs (Screw on PSU) Cap/Button Screw M5x10 - 2pcs T Slot Nut 2020 M5 - 2pcs Factory power supply mount screws - 2pcs Print as oriented in the slicer picture. Print 2 brackets and one…
A3 front logo size 273 mm Number plate holder 112mm
Custom cover for the Microtik CRS310 to accommodate 120mm computer fan. Printed with PLA or PETG with support on build plate only. (Fan cover model: https://www.printables.com/model/334447-hex-fan-cover-120mm)
An Extended ear that allows the CRS326-24G-2S+RM to be flipped backwards to face the inside of the rack.
This is a 1U rack mount for MikroTik CRS305-1G 4S+ IN . This model has exactly twice the width of the original model , so it can be used in combination with the original model. (e.g. 1 MikroTik with 4 raspberry pi, 2 MikroTik with 2…
Moyu RS3M tools Use PETG 100% No Supports needed, re-orient so the wider part is at bottom side Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 0.12 Infill: 100% **Filament:** Sunlu PETG…
The stock mounting plate for the DJI RS3 Mini gimbal has a lip at one end meant to keep the plate orthogonal to the camera body, but it interferes with the front of the Sony RX100 (and likely other smaller cameras) that have the outside…
Uchwyt MagSafe do ładowarki Baseus bs-cw01-1 Najlepiej drukować z ABS
Uchwyt MagSafe do ładowarki Baseus WXJN-01 Najlepiej drukować z ABS
I created mounts for Natalie T 's Modular 10 Inch Server Rack to mount MikroTik hAP ax³ and CRS310-1G-5S-4S+. The Mikrotik hAP ax³ uses a transparent base for the body of the access point that allows the device to be mounted horizontally…
I didn't have the original Delta PSU components to use and I try not to open power supplies, so a replacemnt 5USD AdamTech inlet is a economical choice. Note that the original model is marked Mk3, but I'm pretty sure it is derived from…
4mm holes for underside mounting.
The Mikrotik CRS304-4XG-IN does include a small DIN rail mount. It is likely to be also included with other products they make. This DIN rail clamp does use a spring. I made the indent for this spring different on both sides, so it…
These are mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+. The rack ears for the CSS610-8G-2S+ are the same as those for the CRS310-1G-5S-4S+ in my previous mod . The other parts seen in the photos are from NatalieT's project…
Print in place flat 6 engine, print without supports but in my case it was impossible to print without adhesion. Around 2h 15min print time in Ender 3 V3 SE. I printed it in PLA and it is perfect.
Remix of Motor Fidget by Mars3D with more cylinders. The higher cylinder counts may require more play to get free and some lubrication.
A simple wall mount for your Mikrotik CRS310-8G+2S+IN. One for each side.
Alco RS3 Locomotive - Compatible with Dragon Railway This is a functional Alco RS3 locomotive, compatible with Dragon Railway. To assemble this model, you will need 12 M2x6mm screws. To make this model run you will need 4x N20 1000 RPM…
SKADIS mount for the CRS304-4XG-IN, allows you to use the provided din clamp to mount the switch to a skadis board. Uses the Skaids T-Nuts mounting system:…
A 6-inch rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them. This…
A 10-inch rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them. This…
A 19-inch, 2-part, modular rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't…
This is a remix of another model I love. I accidentally snapped the rod at the center when I tried to remove it from the bed when I first printed the original model. So I decided to remix it a bit to my liking as stated in the difference.
Really like the original model, but it broke so easily due to the paper-thin walls. Also encountered a minor problem when trying to pick a tray up from flat surface while wearing thick (nitrile) gloves. So I remixed it to my liking.
I wanted a neat, out-of-the-way, low-profile mount to attach the MEAN WELL LRS-350-24 PSU to the bottom of my 3D printer. I wanted it to attach to two DIN rails, without causing a counter-leaver effect. I printed this with PETG to provide…
Original text, with adjustments: Designed this cover for the LRS-350-24 power supply unit. It has one XT60E-F socket and a C14 power socket, perfect for a 24V bench power supply. LRS-350-12/24/48 Power Supply: Here 1x XT60E-F Female…
Copper Filter For XRS3 X-Ray .040 v3Copper Filter For XRS3 X-Ray .040 v3 Copper Disc: Uxcell Pure Copper Sheet, 5pcs 2" x 0.04" 18 Gauge T2 Copper Metal Round Plate for Crafts, Electrical Repairs…
This design is a new variant of my previous design which allows me to mount an Accsoon wireless transmitter under my RED Komodo by replacing the back plate for the NPF battery (since I use the DC jack to power the unit anyway). You should…
Allow mounting the switch onto an LGX panel opening, such as onto this: https://www.amazon.com/dp/B0C49HJ79H Printing To quote the creator I remixed from: This switch can get really hot while operating. Do not print it in PLA/PLA+ or…
Printed from CF nylon at 100% infill but I'm pretty sure that was overkill, it'd probably work fine in regular PLA but I didn't want to do this repair again. Also, grease your drawer slides they work a lot better that way! Click here for…
This mount lets you rack both the Ubiquiti USW 16 Pro Max and the MikroTik CRS305 together in a single 1U space. It fits securely and feels solid once installed. I printed mine in PLA and it holds up well, but a tougher and more…
Rack Shelf for CRS305-1G-4S+IN but shortened to save fillament, and mirrored to show the status lights better.
This gearbox increases the torque of an RS390 motor. To print: 2 - gears Gearbox-GearA 1 - Gearbox-Normal-Track-Gear (Optional Long-Track-Gear) 1 - Gearbox-Bottom 1 - Gearbox-Top Non print materials: 4 - M2 screws 1 - M2 26mm rod 1 - M2…
This kit includes a guide for drilling the lid hole into the main housing, use heat inserts to secure the board and lid to the housing Print settings: Infill: 35% Perimeters: 2 Material: PETG, ABS, ASA
STEP files included so you can make your own remix. 120x120 fan. 4x heat inserts Voron style. My temperature with a Noctua 120x120 fan: CPU Temperature 49C Board Temperature 1 40C PHY Temperature 67C
Printer link: https://www.makerfr.com/en/printer-3d/i3-rs32/presentation-de-la-i3rs32/ Print Settings Printer: I3-RS32 Rafts: No Supports: No Resolution: 0.20mm Infill: 20% Filament brand: Prusament Filament color: Black Galaxy Filament…
Stylish inspired keychain designed in the shape of a car front. Perfect for car enthusiasts, this keychain keeps your keys organized while adding a touch of automotive style. A great accessory for everyday use or as a small gift for…
Stylish inspired keychain designed in the shape of a car front. Perfect for car enthusiasts, this keychain keeps your keys organized while adding a touch of automotive style. A great accessory for everyday use or as a small gift for…
The switch itself is 1U-sized and even comes with hardware mounts for a 19" rack installation, but the 10" rack mount accessory is extra. With this mount you can utilise one of the included rack mount ear brackets to mount the switch to a…
Printable wall mount to hold a M5 Paper S3 and hide the USB cable.
DJI RS3 & RS3 Pro Gimbal holder for IKEA Skadis Pegboard using T-Clip system for best quality and strenght. It can securely hold DJI RS3 and RS3 Pro with the battery grip. Designed to be put as in the photos to make up for the slight…
Spool Holder Center Bar || I3-RS32 || MakerFR This small bar do the connection between the two branches of the RoMaker spool holder. It allows a better maintenance of the spool on its support. There are two versions, a hollow and a…
Please print firstly only one testing knob and optionaly scale. Dimensions of your holding geometry can be different. You can measeure your holders first and than scale accordingly.
Holders tested in 200 km per hour but every license plate is diffrent. Yours might be bended from holders you have now or from manipulation from before it might not fit perfectly so this is on your own risk. Printer: Creality cr10s pro v2…
Ford Capri RS3100 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
🔰 Audi RS3 – Front Profile (FREE 3D Print File) This is a free Audi RS3 front-profile 3D print , designed as clean, flat wall art or desk display. If you like this model, you’ll love what’s inside Zap 3D Car Club Patreon 👇 📦 What’s…
HUNSN RS34c 10-Inch Rack Mount A simple rack mount for the HUNSN RS34c firewall , made in two versions: 1U and 2U . I bought this firewall for my homelab, but I noticed that there were no proper rack mount supports available for this…
Ich habe dieses Mesh kürzlich für ein Projekt erstellt. Es ist dem Kühlergrill des Audi RS3 8V nachempfunden. Mir kam der Gedanke vielleicht kann es jemand gebrauchen für ein eigenes Projekt.
MikroTik CRS305 Dual Rackmount — 1U, 19", LEDs Front, Fan-Ready Mounts two MikroTik CRS305-1G-4S+ switches side by side in 1U of a standard 19" rack. Most CRS305 rackmounts turn the switch around so the SFP+ cages face front — convenient…
I wanted a nice brace and red dot mount for the RS3 Reaper and I couldn't find anything that I liked. So-ooo, I found a good generic brace (that mounts to a Picatinny rail) and the Retro Shooters 3D print files and got to work! This took…
This is a remix of the great cup holder replacement by "itsyourproduct": https://www.thingiverse.com/thing:3398707 Changes made: THIS REMIX ONLY FITS THE SHOWN 3 BUTTON KEY! (As found on the new generation A3) If your car has the 3…
The cleaner has some play in this so it can move around when the printhead moves. Print Settings Printer: Maker-FR - I3-RS32 Rafts: No Supports: No Infill: 10% Filament: Prusament PLA Black Galaxy Category: 3D Printer Accessories
I liked the way the bracket had a cover for the front, but the way I wanted my power supply on the side of my desk meant the contacts were a bit more accessible than I'd cared for, I took the original cover design, and added a 15mm lip on…
Here is a quick mockup of a replacement or portable tension tool for the Moyu RS3M (GTS3) style system. I am new to cubing, and am still finding what I like best, so I quickly mocked this up to have a convenient keychain version so I can…
Printed from PLA (a mistake, use PETG or ASA because mini pc is becoming quite hot), 0.55mm layer, 0.8mm nozzle, 15% infill but any other settings will also work fine. Device (even without mount) takes more than 1U unfortunately. Original…
A coupler conversion box for the AristoCraft RS3 (using my Lil Critter as a reference) that uses the Kadee centerset 907 coupler and requires NO modification to the model!
For fun i made this "HomeMade" printer : I3-RS32, you can find the project here : By default it uses a BLTouch for probe but i wished to put a PINDA 2, so you can download the part to replace BLTOUCH by PINDA. Remember to modify the…
As many other users the wristband of my Polar RS300X broke. Therefore I designed this adapter plate so I can mount any 20mm wide wristband to to watch. After cleanly cutting off the rest of the original wristband you can directly mount…
A small shelf designed to hold the MikroTik CRS305-1G-4S+IN switch in place and connect to a server rack. There are small pegs to hold the switch in place: it is a somewhat tight fit, but the switch can be set atop the pegs and slid…
This is a PSU dual stand for 2 MeanWell LRS power supplies which uses the power socket (IEC) from the Creality Ender 3 original power supply. fits: MeanWell LRS-350-24 (and others with the same measurements) MeanWell LRS-35-12 (and others…
Corner number board options for the Aristo-Craft RS3 including both solid and hollow for lighting. Also filler piece to patch the holes in original location. NOTE: I PUT MUCH TIME AND EFFORT INTO DRAWING PARTS AND SHARE FILES FOR FELLOW…
Simple cold shoes for any accessories you want to put on the side of the gimbal. I only have the DJI RS3 but should fit the RS2 and RSC2 and you need 2x M4 screw to mount it to the gimbal
Description Install the excellent BTT Smart Filament Sensor on an I3-RS32 quickly and easily, without performing any surgery on the sensor or the printer. There are two mounting options: on top of the frame, or next to the extruder.…
CAUTION: This version (v1) is deprecated: v2 is available here: https://www.printables.com/model/765733 I needed a DIN-Rail capable Network Switch, and because I really like Mikrotik and RouterOS, I just had to make my own design. I…
It is difficult to install a heavy manual lens on the DJI RS3 pro without support. I made my own version for Mike prime lenses and BMPCC 6k pro camera. Lens part - the original lens support that came with the lens or this model…
This is a fan duct to fit a 120mm fan to the underside of a Mikrotik CRS305 10G switch, for extra, quiet cooling of the processor and SFP modules. It attaches to the switch by sliding a pair of lugs into the switch's wall mount screw…
No screws required. Just snap it on to the end of PSU. Works with this power socket - https://www.amazon.com/gp/product/B0895T9NXF I've only printed this with ABS but it will probably be fine with most other materials as well.
This is a corner mount specifically for the Sony SA-RS3S rear speakers. It requires two screws to mount to the wall (I used anchors for extra support). The speaker does not move around in the mount very much, due to the holes for the feet…
It is designed in 2 different parts, left and right which are screwed onto the switch.
Snaps onto the switch and locks into side vent holes with small pegs. Designed with 80mm fan and M3 brass inserts in mind. Supplied F3D file can be used to edit the fan size and brass insert holes. Best to be printed with fan side on the…
I'v adapted an existing phone holder to fit the quad lock ecosystem, I used the head and nut from the vent mount of quadlock : https://www.quadlockcase.ca/products/car-vent-mount?variant=39828860239947 BOM: 2X M4X8 SHCS screws 1X QuadLock…
Allows for mounting of a MikroTik CRS305-1G-4S+IN almost anywhere using double sided sticky tape. The posts of the print go into the bottom of the router and then double sided tape goes on the bottom of the flat piece. Stick it where you…
This is of interest to you 🌟 Welcome to the community! 🌟 Are you a shop and do you want the commercial rights to the models? Do you want to receive 4 unique models? Take advantage of the offer 5 dollars per month for the first 100 users.…
Likes, Please! I’m excited to introduce the newest addition to our collection: the striking Red and Black Duckling ! 🦆 This captivating figurine is ready to grace your space with its bold colors. 🎨 Customization Opportunity : Feel free to…
This is of interest to you 🌟 Welcome to the community! Are you a shop and do you want the commercial rights to the models? Do you want to receive 4 unique models? Take advantage of the offer 5 dollars per month for the first 100 users.…
I have created this new model for the Valentine’s Day contest. It is a piece that I loved modeling, with many curves, simple but at the same time complex to make. If you like it and want more models like this, follow me on my Patreon and…
This DIN-RAIL Adapter let's you mount a Mikrotik CRS326 (24-Port Desktop PoE-Switch) on a DIN-Rail. History This is Version #2 (2024-02-15) of mounting a Mikrotik CRS326 on a DIN-Rail. v1 worked, but was hard to get on the rail as the…
I designed this Cover and Fan support for cooling the SFP+ RJ45 modules in my Mikrotik CRS309 (fantastic router/switch). With this, my modules seem to be running very cool: in fact when touching them I feel they are not even slightly…
Challenge for me - daily figure modelling Community challenge - every 500 downloads and I'll raffle filament among followers
Audi RS3 logo/badge I have mounted the logo on the front lip of my Audi Rs3 with double-sided adhesive tape. It is a remix of: Audi RS3 keychain customizable square color by CitronKipik - Thingiverse I printed it with my Bambulab X1C with…
Custom cover to improve Microtik CRS310 cooling and meaningfully reducing noise by replacing the original 40mm DC fan with a pc case 140mm one.
