Liczymy pasujące modele…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)
Wydruk około 7,92 €–9,68 € nettoWstępna wycena jednego wariantu
I was looking for a commercial made vinyl siding bracket to mount an Arlo wired video doorbell but could not find one. So I made one. I’m including a step file for anyone that wants to mod this, should make it easier. I used 4 perimeters…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made possible by my amazing Patreon supporters! If you like my work and want more models like this one you can support me in Thangs Darth Sidious, born Sheev Palpatine and also known simply as the Emperor, was a human male Dark Lord of…
Its My GCODE what i use. Mein GCODE was is so nutze. ------------Start Code----------------------- G21 ; set units to millimeters G90 ; use absolute positioning M82 ; absolute extrusion mode M104 S{material_print_temperature_layer_0} ;…
This version of the Darth Sidious’s Collapsing Lightsaber prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
Update on 2/10/2023: I added a different “Rastered” set that has only one registration ledge to accommodate people who may have situations where they cannot use the bottom ledge in the original design. These 3 new designs are the same…
Adapter for the original Ring Video Doorbell and 2020 rerelease to allow it to mount nicely against 4" siding. I couldn't find anything that fit my needs, so I made these. They should print with no supports if you print it with the bottom…
Siding flush mount for the Ubiquiti Unifi G4 Doorbell Pro. V1 is the original model that works/worked with the G4 Doorbell Pro when it was first released. V2 is for the later changes to mounting pattern / holes that works with the newer…
I came home last night to find a few sections of my vinyl siding had separated from their neighboring runs of siding. I hopped up an a ladder and quickly realized that I would need some type of tool to pull open the plastic lip on one…
Turns your Metabo coil roofing nailer into a siding nailer.
This is multi-wrench I made for my Rugged Obsidian 45 that includes a regular mount wrench, an end cap wrench, and a 3-lug mount wrench. Print flat side down, no supports required. I designed this in inch standard and that's how it…
To scale glass dagger from the epic series Mistborn by Brandon Sanderson.
My new Ubiquiti G4 Doorbell Pro was significantly larger than the older model it replaced so a new mounting plate was required. I wanted a simple mounting plate that allowed me to locate the doorbell optimally. My house has vinyl siding…
Due to the included adapter being only flat I've created a siding adaptor made for standard 4" vinyl siding. It keeps the sideway angle of that included spacer. There are two models included depending if you want to install the doorbell…
This is a Cable clip designed to hold the Starlink Dishy Mcflatface cable to vinyl siding, no tools or drilling required. These simply slide up and snap into place just like the vinyl pieces attach to each other. They could of course be…
Compatible with almost HO scale truck. Use a .2 mm nozzle
I made this to be able to mount some lighting and a camera on the front of my house. I have vinyl siding and needed a 'filler' to make it look flush. I designed this but have not found the time to print it and test it out. I still wanted…
UPDATE 2023-12-06: There was a slight measurement error in the base notch spacing of many of the originally uploaded models. I replaced them all with corrected files. If you downloaded and printed the old designs, they will still work,…
I needed a simple yet aesthetically pleasing plant pot for my growing jungle. Therefore I designed this perfect squeare-ish vase mode print to achieve that end. I designed this in Blender and applied multiple subdivisions and displacement…
Fuzzy skin make this model more beautiful;) I don't have much time for 3D, but I try to do something in my spare time :)If there are any questions or advice, I will gladly listen.
3D Model of Palpatine's lightsaber. I noticed there was nothing really close available as a free model so decided to make my own. I think I've got it pretty bang on apart from the Inner grip but it's close enough I guess… All parts are…
The are based of the current sidio crate dividers for both half and full size crates 9/2/25, Tweaked ears on Fullsize split and also connector( allows for slight angle and also 2 piece for faster printing 12/18/24 Added new version for…
Blink camera mount for Dutch lap siding (Menards)
This mounting bracket is designed to be a form fit for both the aluminum siding as well as the black metal back plate of the G4 doorbell. It is a right-hand mount, but is designed to be mirrorable in PrusaSlicer to get a left-hand mount.…
This model is a Reolink RLC-811A Camera Mount for 5" Dutchlap Vinyl Siding. It will print with no supports. I needed a sturdy mount for outdoor use so I printed with 4 perimeters and 4 top and bottom layers out of ASA. Mounting hardware:…
There is a “wedge” version which has a 5% downward angle of the mount so that you can see packages closer to the wall. The non-wedge version does not include the 5% downward angle. You can download the model or edit the model directly in…
Mount for a Blink security camera for vinyl siding. Modeled after the clips I use for Christmas lights so I don't have to nail or screw things into the house. They are removable so you can change the location of cameras easily. I ordered…
The is designed to work with the Ubiquiti UniFi G4 Doorbell Pro and use the mount included in the box. The vinyl siding of my house will make it so the doorbell is at and angle so this corrects that. I included the FreeCAD model in case…
Printed on my PrusaXL with colour change set up in the Slicer Used generic black PLA and Purple Galaxy Prusament, but you can definitely achieve better results by painting the model Added a version with a flat bottom surface, for easier…
Dutchlap Siding Adapter Plate for the Unifi G4 Doorbell Pro
This model forms a solid base that will allow you to mount lights on a specific pattern of corrugated metal siding. See the pictures in order to understand how this is used to hold the light and the pattern of metal siding that it will…
Clip that can be used to hang lights, frames, etc. on Vinyl Siding without screws. Just push the clip through the joint between two sidings. Removal is easy, and just requires to pull the clip towards you, and as long as there is downward…
Welcome, Hunter. You are Forth , a living weapon forged for a single purpose: to dominate the battlefield and sever the souls of your enemies. You are not a simple soldier; you are a Level 18 Battle Master Fighter , a veteran who has…
Customizable mounting plate for vinyl siding. Refer to DimKey image. First two values PeakToPeak and Section depth refer to siding. Remaining values are used to create the plate. The cutout can either be round or rectangular and is…
No more damaged Extension cords! No more "good Neighbours" damaging your expensive extension cords with snow blowers! Prolong the line of your cords from damage of the elements! Just pop under a seam on your siding and friction does the…
Parametric model for mounting the Unifi G4 Doorbell Pro POE at odd angles, on either the left or right side of the door. Intended to be used with the metal backplate that comes included with the doorbell. The POE version comes with angled…
i haven't found a 4.5 inch dutch lap siding yet and spent awhile designing this one actually kind of very proud of it just find where u need a hole for attachment purposes aka light ,dryer vent, camera and cut out as necessary i printed…
I designed this to mount the doorbell to the front of my house which has 4.5" vinyl siding. I didn't need any extra screws; just used the hardware that came with the kit! Printed on an MK4S in PETG: Printed on its side with organic…
Darth Sidious / Sheev Palpatine
I need an angled spacer so that this would fit on my house's siding.
SIDIO Compatible Crate (stacking) 12.5x18.5x11in (without separators or draft) Let's be real, no one is being organized with tiny 3D printed containers. We need large format organizational systems, in particular for manned mars…
Version 1 (red print in photos) I created based on a similar design I found, but I made mine based on the type of siding I have, dutch lap. I printed it with a 4mm nozzle and 20% infill out of PLA. The plate is 3/8" thick. The triangle…
This is an easy to print mounting kit for a Ring Doorbell. Works with Ring Doorbell models 1 and 2. I designed the mount myself to custom fit my siding on my mobile home. The angled mounts and rain cover are altered versions (original…
Inspired by what look like obsidian swords in various places online I wanted some for my Transformers. Enjoy.
This inserts in between vinyl siding connections to mount your Wyze Pan Cam v3. Assumes you still have the original right angle mount. Let me know if you attach it to a print, I'd love to know about it! If you would like a 90deg rotation,…
These are two angled spacers to be used to mount a basic 2021 wired Ring doorbell to cedar or vinyl siding. One of the spacers will have the doorbell facing straight out from the face of the siding and the other is angled 15 degrees to…
Obsidian Skull Monarch, mask, cosplay, wearable, costume, face, helmet Quick 3D | Professional & Free 🚀 I keep my designs free for everyone to enjoy. If my work adds value to your day, please consider a small donation. ☕ Support here:…
Bought a Ring 2 Doorbell recently but none of the mounts worked well for me. I have both vinyl siding and I wanted to hardwire to the existing doorbell wiring so I designed this up. My siding is of the 4" slat variety, very common here.…
My home needed a more robust method of mounting my front door light fixtures to it's vinyl siding. Previous owners would change lights and drill new holes to the point where things were pretty bad and I could no longer get a snug…
clips to hang holiday lights on vinyl siding. Print Settings Printer Brand: Creality Printer: K1 Rafts: No Supports: No Resolution: .2 Infill: 100 Filament: Inland Tough PLA White Category: Outdoor & Garden
Update: Added a wall plate with NO channel for wires. My house I and the doorbell wired come out below where I wanted. The updated one just has the hole in the middle of the plate. Update: Added a V2 for the plug. I thickened up the…
Forget sand dunes. This is what's left after the magic fire fried the world. They call these Obsidian Shards the 'Land’s Teeth' for a reason. Every single one is a razor-sharp, vertical spike of volcanic glass, jutting straight out of the…
I finally got around to putting new vinyl siding on my garage and could not bring myself to make holes in it with screws so I whipped these up so i could re-hang my garage decorations. They have a surprisingly good grip & are super-simple…
Reolink Doorbell 4.5" Dutch Lap Siding Mounts These mounts fit on 4 ½" Dutch Lap vinyl siding and provide a mounting surface for Reolink's video doorbells. Two versions: POE/Wifi and Battery. You can mount the angle mounting bracket onto…
Hey everyone! Here is a base system for the Sidio Crate . Allows you to use the incredible Gridfinity system by Zach Freedman (VoidStarLabs) in your crate for any of your needs! The entire size of the grid is 10x6, so I cut down the…
Was having a hard time hanging outdoor lighting from the vinyl siding so I made a hook to help me and everyone else out. This hook just pushes in to the siding trim and has notches to holds it in place. Print Settings Printer: CR-10 S4…
Use this adaptor to create a flat surface on vinyl siding.
After creating my angle mount for the Nest Doorbell (Battery), I got requests to make a design for a siding mount. I don't have siding myself so this design is untested. It is designed to fit siding with a 4" face and 1" depth. Print face…
Simple clip to mount Christmas lights on siding
A warning, that is. That Obsidian Glyph isn't a spell, it's a contract, carved into a slab of the hardest glass by one of the Coven of the Unbound Will sorcerers. They're the self-made lot who think they can rewrite reality itself through…
This is dimensionally accurate for the Doorbell Lite outline, screw holes, and ethernet pass through. Adjust parametric model to fit your siding. The model and step file shown here are for the common siding size 4" x 1/2". So if you have…
This model provides a bracket for mounting a Ring Gen 2 Wired doorbell on siding with the common 1/2" step every 4" of height. The model fits between the siding and the bracket the comes with the doorbell, allowing the doorbell to remain…
I Reupload the Marlin Firmware for Ortur Obsidian Firmware from FiveNights. Seprat Dowload Link (mega) : https://mega.nz/file/OBt2DRDQ#C3d0SHPsjsh9Uca4wbUyofAKsv48Xuf8ZZ_ATNihnnY i use the frmware to day and its work and fixet my problems…
Slides in between the horizontal vinyl siding connections via friction fit. Easy to move. Easy to remove. I printed at 1.0 layer height to give the posts the best chance of not breaking. I added a Support Enforcer just over the posts I…
Updated (April 2026): I have updated the file as I cleaned it up and made some slight modifications (thichness, wire opening). V1 and V2 are the same width and heigh but the back is slightly different to try to stay flush to my siding.…
The Obsidian Guardian Headphone Stand combines fantasy and function in a striking 3D printable design. Shaped as a stoic guardian with sharp crystal features, it rises from a base of jagged shards, creating a majestic and powerful…
Printed with PETG for outdoor use, with 0.12 layers and no supports. Could still use some improvements, slots are a bit long but it worked for what I needed.
Allows the Ubiquiti U7 Outdoor (U7-Outdoor) and U7 Pro Outdoor (U7-Pro-Outdoor) to be mounted on corrugated metal siding, specifically with a 2-2/3" spread and a 7/8" rise (see photo). This mount is compatible with both the Ubiquiti U7…
Needed a vinyl siding adapter to be able to attach the google nest 2nd gen battery doorbell to the side of the house. The only one i found on here was for the wired version only. This adapter is for the battery version (Which can also be…
For the Wyze v3 Remix of sjguppy and https://www.thingiverse.com/thing:4838456 The siding 'teeth' may come off if your siding is tight and or old. They may need to be beefed up - see v2/v3 Even with a siding removal tool I can't get them…
The wires for my doorbell came out of the wall right at the bottom of one of the 7" peak-to-peak siding sheets. The Arlo Video Doorbell wants to be mounted right where the wires come out and, thus, I had a problem getting the doorbell…
בית תפילין של חסידות ברסלב תפילין אם הכיתוב "אש שלי" וסמל הכתר של חסידות ברסלב. אני ממליץ להדפיס בגובה של 1 מ"מ ועם תומכים בכל מקום. אני הדפסתי עם PLA. כאשר ההדפסה באיכות גבוהה מאוד, יש צורך להדביק את שני חלקי התפילין עם דבק. כדי להסיר את…
print on bottom with no supports. no enclosure needed.
A model of Yennefer of Vengerberg's "Obsidian Star" pendant from Netflix's The Witcher. The model features a 2mm pendant base and a recessed 8 point star cutout. Design allows for switching out filaments to make the pendant two-toned, and…
I'm running some Cat6 outside for a camera, but I have fiber-cement siding (commonly known as HardiPlank) and couldn't staple the network wire. I noticed the siding planks had small gaps where they overlap, and upon further inspection,…
I created a Obsidian Flint Necklace for everyone, who love argeology and necklaces :-) This model I created entirely by myself. Whole Obsidian Flint Necklace have dimensions 88 mm x 42 mm x 16 mm in folded state. You can print it all in…
4" Siding Mount for 2 Ubiquiti G4 Bullet or G5 Pro Cameras and others that use the same mount. Big thanks to user PHOENlX for providing mount on Thingiverse. https://www.thingiverse.com/thing:4930947 Print Settings Printer Brand: Prusa…
This is one of the quiet places. They look like headstones, don't they? But these colossal, broken slabs of obsidian are remnants of the great jungle that used to be here, the final, sorrowful memorial to the Doku-ya Juy'ata's lost world.…
I made this mount originally for a Ring Doorbell, but I recently replaced the Ring with Nest's new doorbell to keep all my cameras consistent. That being said, I had to make a new mount for the doorbell. This is it. This mount has a…
This adapter works with the TP-Link Kasa KD110 doorbell on standard 4" double siding.
gives you a FLAT place to mount whatever you need to mount on stepped siding
Tired of your Ring doorbell sitting crooked on vinyl siding? This mount is designed specifically for 4" vinyl siding to give your Ring Doorbell Pro a clean, flush, professional install —no awkward gaps, wedges, or shims. 🔧 What it solves…
I created a Ring 4 camera mount for my Ring doorbell after mounting it haphazardly to my siding. This ended up warping it slightly and just not allowing for a nice clean install. We also had issues with debris and whatever else ending up…
My old doorbell was mounted on my siding. The new WYZE video doorbell would have been mounted angled down without an adapter. So I whipped one up. This one has two sets of holes. One for the new doorbell plate and one to mount the adapter…
I wanted a lower-profile replacement heel for my Sidi shoes that more closely matched the original. Thanks to Chris for his original work and getting the fit of the curves just right to match the bottom of the shoe! I would recommend…
For basic testing of 3DXtech Obsidian v2 (PA6-CF) with a Core One+. The G-Code is for regular flow 0.4mm and 0.6mm nozzles. It seems to print pretty well out of the box using the Prusament PA11-CF profile as a starting point. I'll…
Fits unknown-brand 4.5" vinyl siding. Two parts are available: One uses two rectangular pins for alignment and requires gluing. The other is a single unit, but requires supports. Update Made pins symmetrical, so angle can be reversed
Prints with supports. I printed in petg and so far it has been holding up well. I did not need to screw into the siding or use adhesive though that would be more secure. I used 3mm screws and tapped the holes, but there are recesses for…
3 degree and 6 degree spacers for Reolink doorbell camera, corrects the level of camera when mounted on older clapboard siding. Blender file included. Category: Household
These are a few detail parts for the RDL faction from the tabletop game Obsidian Protocol. - leg bars for the RL-06 Standard Chassis to replace the split ones - ML-32 and ML-34 missiles tubes to replace the hollowed out ones - Ammo Feeds…
Its for The Ortur Obsidian Fan Duct origenal stl Data what in the sd card includetet. Es ist für Ortur Obsidian das Lüfterkanal steck Dings was in der SD Carte dabei war. (Original STL) Print Settings Printer: Ortur Obsidian Rafts:…
Wedge for the Arlo Doorbell to accommodate siding. Fits under that stock Arlo mount perfectly and has passthrough that matches stock for wiring and screws. The angle of the wedge is 5 degrees which is .5 degrees off level which was…
The original model wasn't the right size or had the holes for the brass inserts I needed so I remade the same idea from scratch. You will need some 6mm deep M4 inserts. These will work with the provided M4 screws that come with the…
Drive cage support for Corsair Obsidian 750D computer case. Print Settings Printer Brand: BCN3D Printer: BCN3D Epsilon Rafts: No Supports: Yes Infill: 20% Filament: BCN3D PLA, Tough PLA, ABS Notes: 8 Nov 2024: Rounded up and chamfed. v21…
Removed the opening per request of someone who needed the file w/o the opening. Thanks @scorf for sharing the step file.
Print out of PETG. The ring fits over the stock mount to hide the gap. Should fit over it fairly tight. Adjust accordingly.
This is a an adapter to allow a REOLINK 2K Battery Video Doorbell to mount to siding. In my case it's staggered Hardy Board, but it will work for any siding with a 12mm thickness and a ~7 degree angle…
This is just the rear foot pad for the right side. Left side should be the same but mirrored. Tabs help the piece hold in place, should be ok without glue. Other models have added a third screw or are completely different shapes. Print…
I made this after the original arm rest cover on my Sidiz T50 split, also it doesn't match the original covers very closely so maybe print a pair.. oh but it's tpu so that's going to take you forever, good luck
Use this to install a light or other fixture mounted flat on your siding. Updated to include mounting holes - to siding & for lamp. Moved electrical inlet up for my application.
