Liczymy pasujące modele…
This Silica Box is for the AMS Hydra Mod , but it also works perfectly with the standard AMS. It fits perfectly and the volume is larger than in other versions. There are also versions that support a Hygrometer. This is the Hygrometer I…
Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu
I redesigned from scratch my favourite silica container by Malolo. I loved absolutely everything about it, except that it prints a little slow. I used horizontal slots so that it prints much faster with less retractions and hops. In 0,3mm…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
Model To prevent fast dry out of your started silicone/acrylic cartouche print this cap and screw it onto your cartouche. The cap has a conic inside to close the opening better as just a plain cap. Printing instructions I used PLA but…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this silica gel container mostly for two reasons: I looked at several different silica gel containers and even printed a few but always found something I was not entirely happy with (I most likely didn't look at every single…
Wydruk około 3,30 €–4,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…
Wydruk około 4,26 €–5,21 € nettoWstępna wycena jednego wariantu
About I really love original Silica gel spool container by @gdrag. However I wanted to achieve Three additional goals: Make a spiral (vase) print to reduce filament and time, Add some distance between side holes and internal wall of the…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This tool set helps you get a perfect finish on your silicone caulking. You'll find the following: straight profiles for corners (5, 7, 8, 10, 12, 14, 16 mm) rounded profiles for taps, fittings, or recessed joints (5 and 15mm) a tool to…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Silica Gel Container with a closing lid held by a small clip.
Wydruk około 1,69 €–2,06 € nettoWstępna wycena jednego wariantu
🇻🇦 ¡Benvenuti in Vaticano! Welcome to the Vatican! The world has a new Pope, Leo XIV, and on this occasion, MiniWorld3D is bringing a major landmark of Rome and the world to our library. This entry is a highly-detailed model of St Peter's…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
This is a remix of gdrag's excellent Silica gel spool container cap / lid, modified with a large funnel to make filling easier. The funnel is twice the diameter of the container opening so it really helps to keep from spilling those…
Wydruk około 2,41 €–2,95 € nettoWstępna wycena jednego wariantu
I really liked the original model by @gdrag and the idea of @Lorro to use a wavy mesh. So I combined the two to get a smooth external surface with the wavy mesh. It prints faster avoiding retractions and with less vibrations. The bottom…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
Remixed with bottom chamfers for better bed adhesion. No supports needed Fits new AMS ribs. Use a rubber band to hold the sides together Original model by @muddtt had fillets, which was a pain to print with ABS and other materials…
Wydruk około 1,39 €–1,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My take on a silica gel container using honeycomb infill for the top and bottom of the model to get a nice grid of holes. I've included files for the large (180x100x25mm) and small (60x60x15mm) box. Was inspired by…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Used to store almost 1 kg of silica gel. If you print the container with high temperature resistance filament, you can use it also for drying silica gel in dry box. Dimensions are similar to other spools. Easy to print, no supports, no…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
Sealant/Silicon Cartridges Cap Print in pla in 0.25mm
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
New molds, much better: https://www.printables.com/model/1185152-new-better-crucible-molds-for-microwave-metal-melt There are 2 different size molds. I print them in PLA 20% infill. The Lid and inside cups should be printed @0.16 mm layer…
Wydruk około 15,10 €–18,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Silica gel / desiccant containers to help You store Your filaments in dry conditions. This is a remix of Malolo's containers, main differences are lid which now contains slot for a hygrometer and reworked container heights. In differences…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Silica Gel (Desiccant / Moisture Absorber) Holder for the center of a filament spool. Especially designed for purefil filament spools but should fit other spools as well. It has a temperature and humidity sensor in the top. The top is the…
Wydruk około 2,32 €–2,84 € nettoWstępna wycena jednego wariantu
I had some silica gel lying around, and I wanted to make a container for it so that I could use it in my filament drier. I was searching for a good one, but they all seemed to have large holes that would only work with larger silica gel.…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Why should I use this desiccant container? It's sized to fit into any spool from .5kg and up. It uses much less desiccant while also maximizing the water absorbing surface area. The desiccant can be rapidly dried in a microwave,…
Wydruk około 10,13 €–12,38 € nettoWstępna wycena jednego wariantu
Easy to print, no supports, no bridges. You can print a cap or use a cheap thermometer. Use skewer to open the container. Container_A - Fits Prusament spool Diameter 50 mm Height 70 mm Container_B - Fits Polymaker spool Diameter 54 mm…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Organization of sealent or silicon tubes. Can be extended to hold as many tupes as you want in fusion.
Wydruk około 3,11 €–3,80 € nettoWstępna wycena jednego wariantu
Standard silicone cartridge nozzles are too wasteful for my taste - you have to push out a great volume of material to fill them and get it going out of the nozzle. Also, there's never one around when you need it, because they're…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Silica gel container with screw cap. Height 55mm, width 53mm. 13 Jan 2021 update added model with smaller holes to better support silica gel brands with uneven pellet sizes
Wydruk około 2,94 €–3,60 € nettoWstępna wycena jednego wariantu
If you want, you can support my project on PayPal . I am very grateful for every small donate :) Thank you! Descpription: Two sizes of perforated cylindrical boxes for silicagel. Small box - 24,5 mm (height: 17 mm) Big box - 50 mm…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
SilkaPRO Evo ✨E’ l’evoluzione del celebre accessorio per la sigillatura fai-da-te! Con un design ottimizzato per la stampa verticale e una punta smussata di precisione , questa versione garantisce ancora più facilità d’uso e una finitura…
Wydruk około 1,25 €–1,52 € nettoWstępna wycena jednego wariantu
Just a quick and dirty solution for the wall mounted drybox https://www.prusaprinters.org/prints/4605-wall-mounted-drybox-with-sensor
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
eine praktische Silika-Dose findest du hier: https://www.printables.com/de/model/607142-silika-dose-silica-tin-silica-container
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
I live in a very humid climate in Florida and need to make sure my expensive (but best quality) filament from Prusa is all dry and dehumidified. I have designed/remixed a solution to use rechargeable silica gel with a digital…
Wydruk około 3,86 €–4,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the silica gel container by the user TC! I used the container A model that fits Prusament spool Diameter 50 mm Height 70 mm - fill the container with silica gel perls - add a sensor module - put it into your filament…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .
Wydruk około 29,78 €–36,39 € nettoWstępna wycena jednego wariantu
This is a quick model I put together when I couldn't cut consistent 10 mm length silicone tubes for the silicone bed mod. Works with the recommended 7 mm OD automotive silicone tubing and the cutting slot is 0.5 mm which works well with…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modeled in Fusion 360 and then made permeable to air by modifying the models with cylinder volumes that delete the perimeter/bottom/top layers for the parts that should be porous. The 60% gyroid infill gives a very small pore size that…
Wydruk około 2,84 €–3,47 € nettoWstępna wycena jednego wariantu
I made a silica gel container, and I wanted to make a funnel for it so that it is a lot easier to pour in you silica gel. So I whipped this up in Fusion and put it on my printer. It makes it so much easier to pour silica into it. Here is…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wanted to use this design with my silicon springs and added handles. Great concept so I chose it. I added a 3mf with the supports on the strain relief so you could see how I did it. Printed on my 2 Aquila's converted to Ender 3 V2's using…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
Created this to hold rolled silicone baking mats.
Wydruk około 3,67 €–4,49 € nettoWstępna wycena jednego wariantu
A magnet-held basket for desiccant silica gel bags. Prevents the filament from absorbing humidity during long prints. Makes sense only in combination with a filament side door , like this one . The silica gel bags should be regularly…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a place to store my set of E3D Revo Six nozzles that was: enclosed - to keep dust away expandable - you print as many nozzle holders as you have nozzles modular - positions can be swapped freely The excellent v2 side drawer by…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It’s a press-fit handle designed for the Bambu Lab A1 Nozzle Cleaning Brush. Printing recommendations: Use at least 4 perimeters for added stiffness Compatible with 0.4 and 0.6 nozzles Print with a high-temperature material. PETG HT 100…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's an unraveled silicon cube showing the Miller indices (grid structure and directions) of pure silicon like in silicon wafers. Can be used to help understand how a wafer is etched depending on said wafers orientation. This type of grid…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
This is a remix for a 50 mm model that can be used for Prusament Spools
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
After getting cheap round hygrometers and printing a bunch of hygrometer lids I found that they would not fit because they are tad too large to go through the lid opening in the original lid and have very hard latches which do not…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
I cut the front of the box at the same angle as the inside to reduce filament and print time
Wydruk około 1,71 €–2,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple silica pot with fitting for a simple lid. The fit is smooth and can be improved for a better fit. Suggestion: reduce 1% of the lid for a firmer fit.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
There are quite a few nozzle brushes around. I wanted a brush made from silicone that cleanes the nozzle very soft and without scratching the brass of the nozzle. The handle is printed in PETG (Prusament PETG white in my case). The brush…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keyhole Pegboard holder for my wolfcraft silicone gun. The Pegboard-spacing is 45mm. Prints without supports.
Wydruk około 1,49 €–1,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: The funnel is designed for original 800-gram “Traiva” silicagel container. No supports needed. CZ: Trychtýř je navržen pro originální 800-gramový silikagelový obal značky “Traiva”. Tisknout lze bez použití podpěr.
Wydruk około 1,76 €–2,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In combination with blinding the tube will slow down the drying of the silicon.
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A drying rack for reusable silicone “ziplock” pouches/bags, this allows you to stand the bags upside down while keeping them open to properly dry after washing them.
Wydruk około 15,83 €–19,35 € nettoWstępna wycena jednego wariantu
Print with a perimeters of resulting thickness > 2.4 mm or with 100% infill Supports are only needed for the cap (paint them in slicer) Silicagel drying balls with diameter d > 2 mm Base dimensions - 85x35 mm, Height - 175 mm Capacity: up…
Wydruk około 13,48 €–16,47 € nettoWstępna wycena jednego wariantu
Násypka a trychtýř mají tříchodý závit podle originální lahve. Tloušťka stěn je 2 mm. Odměrka je na 100 g. Moje tiskové nastavení: Petg Výška vrstvy: 0,2 mm Výplň: 50 % Perimetry: 6 Podpěry nejsou potřeba
Wydruk około 3,07 €–3,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Silicon cable holder for Dodge Polara 1963.
Wydruk około 0,62 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ich kann sie somit hinter die Filamentrollen stellen und damit leichter und schneller entnehmen . Beachtet bitte die original important Print Instructions von Shaun @Shaun Danke für die Freecad Datei. Ich habe wieder etwas gelernt.…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
This is a mold for 7 Silicone feet that mount under the grates on a Viking Stove. They match the originals exactly. It is very easy to pour the silicone into the 2 part mold and make as many replacements as you want. Happy Printing. Video…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
This 3D printable educational model demonstrates the basic principle of semiconductor doping using a physical, hands-on approach. The model consists of a base plate with recesses for individual atom pieces. Silicon atoms are represented…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
These boxes are specially designed to be printed really fast and also to have as many holes as possible to let the wet air reach the silica-gel inside. The screw cap is an easy and durable way to close the box and also open it again to…
Update A loading funnel is now available as well, download it here ! Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me…
UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…
You like your filament dry ☂. And yes, there are some silica gel boxes out there already. But most of them are a bit too generic are lacking features like a hollow core … … or a bearing mount option to work as a filament roller. 😍 And…
No brim or supports required. A set of finishing nozzle tips designed for silicone, caulk, sealants, adhesives, and similar cartridge-based materials. The nozzles screw directly onto standard cartridges and feature integrated finishing…
You like 🥰 the KID'nR filament spool silica gel boxes, but your spools don't fit as they have a larger inner core diameter? Here it is the KID'nR XL : All the features as the standard model but now for spools from 56mm - 90mm inner core…
This is a remix of SoftFever's middle dry box AND SamH's remix for AMS that works with round hygrometers that are available on Amazon in the US. Use the top from SamH's remix project. Updated 10-20 Added indent to back wall for AMS roller…
Designed to fit universally on silicone sealant cartridges with an S15 × 2.5 thread , it is a simple and reusable solution for storing partially used cartridges. Features Helps prevent silicone from curing between uses Universal fit for…
Notice! This version is obsolete. An updated version compatible with both stock and all Hydra versions is available here: https://www.printables.com/model/1633611-high-capacity-ams-silica-dry-box About This is only compatible with Hydra…
NO software modification are required if you have a K1C Just print, glue up the original silicone brush and screw the bracket in place reusing the 2 carriage screws. Now you can use whatever plate you want. I have included a brush mold…
A compact tool designed to clean caulk and silicone cartridge nozzles after use. The spiral tip helps remove leftover material inside the nozzle, preventing silicone or sealant from hardening and allowing repeated reuse. Simple,…
utile utensile per facilitare la stesura del silicone,si consiglia stampa in TPU
This tool features interchangeable head pieces , allowing you to choose the finish that best suits your project. Two head styles: Chamfer – creates a clean, angled finish Round – produces a smooth, curved joint Each style comes in three…
Created a new Silica Gel Desiccant tray for the Bambu Lab printer. I think there must've been some revisions on the AMS unit because the trays I've tried on this site don't fit because the ribs are too long on my AMS. I tossed a rubber…
This Slim Silica Box is for the AMS Hydra Mod, but it also works perfectly with the standard AMS.
This is arguably the best tray for desiccant beads for the AMS of Bambu Lab. The lid has a recessed grip where a lamella of the tray sticks through. this allows to easily take out the entire tray including the lid but without the risk of…
I had changed all my box to v3, please use my AMS dry box center v3.3mf for print. If the hygrometer(some is so big) is a little small, please use same paper to fit it(I used it in photos). For drying Bambu AMS box, you can directly add…
In Prusaslicer set Vertical sheel perimeter to 5 to get more powerfull tool. Print orientation
Remix to add a handle to the lid. Had to shorten the box to accommodate the lid so you will lose some volume. Includes versions for the rectangular and round hygrometer. Link for rectangular hygrometer:…
This is a small box for silica gel. 190mm long, 68mm wide and 20mm high. So the box fits under a standard spool. The lid snaps in, printed from heat-resistant filament, the silica gel with the box can be dried in the oven. Holds over 100g…
About This is a funnel for easily filling the Adjustable Spool Holder for Silica Gel / Spool Weight with silica gel. It also fits the hygrometer version of course as it has the same lid dimensions. It was designed so it can be easily be…
I redesigned them mostly from scratch to make them slimmer and fit in th AMS with the new Hydra Pro mod. They're about half the size and fit in the Hydra Pro AMS like a glove. The convenient knurled tab on the back make it a breeze to…
I printed mine in PLA, no support and in 0.20 mm
After printing both versions of the center case that supported the addition of the hydrometer, I realized that while the second case looked better aesthetically it did not function well due to the lack of airflow around the unit. Remixed…
This is an adjustable gantry mounted nozzle parking spot and brush for Vorons (2.4 & Trident) using bambu lab's silicone wiper. New Version! Now made more modular and using high temperature silicone RTV to further improve nozzle heat…
This is a container for silica gel: It has quite a lot of holes and in total a quite high hole area ratio, so great air flow . It is printed in vase mode, which makes it quite fast to print (especially without retractions) and it uses not…
The silicone tube/cartridge/cartouche cap helps silicone is not drying after usage See also the version with protector for cartridge and applicator: https://www.printables.com/model/1135314-protector-for-silicone-cartridgecartouche-applicat
Do you need a tool to smooth silicone around pipes to seal any leaks? Or after installing a sanitary fixture? This is the tool you were looking for. This tool features a handle for a comfortable grip and various spatulas with the main…
Description: Recently, I’ve been working a lot with construction adhesive, and every time there was a problem with glue drying inside the nozzle. To solve this, I came up with the idea of making a simple tool that helps clean the nozzle…
Perfekt für Silikon Fugen glatt zu ziehen. Perfect for pulling silicone joints smooth.
Ich hasse es wenn die kurz benutze Silikon Kartusche beim nächsten Mal ausgetrocknet ist... Somit hier ein Verschluss. Damit es optimal dichtet einfach ein Gummiband vorab auf das Gewinde geben (muss aber nicht sein). Der Verschluss ist…
Newer model here - gantry mounted version including nozzle stop to prevent leakage when parked: https://www.printables.com/model/882364-new-version-adjustable-gantry-mounted-nozzle-seal This is a remix of the great design by FunFunBoy…
Silione finishing tool, set of 2. Get those perfect finish silicone corners. Simple tool set, easy print. print 0.2 layer 25% infill material: any [original are made in silicone], but i´ve been using petg and pla, and it works great - if…
Tool for creating nice corners of silicone (e.g. in the bathroom). One object has a 3, 4, 5 and 6mm radius and the other a 7, 8, 9 and 10mm radius. Enough choice for every job!
I've been using the great silica boxes designed by SoftFever (https://www.printables.com/model/269545-slica-boxdry-box-for-bambulab-ams) inside the left/right slots of the Bambu Labs AMS and the thermometer/hygrometer stand by maddtt…
I had so much silica gel left for dehumidifying and drew myself a little box. Can be printed completely without support. In the picture you can see the 3 versions from the development. The last one can be seen on the far left. The Fusion…
Add flexibility to your nozzle cleaner,
Silica Dry Box for BambuLab AMS with rectangular hygrometer and vertical slots. Updated 10-20: Added indent to back wall for AMS roller fix from 'dietrich'. Also added the original lid for convenience. Updated 10-18: Updated with vents…
What started out as a remix has now been completely overhauled in CAD to require a bit less Y-overtravel and be a bit more robust. If you are here to reprint a specific part, or using parts from other remixes, it may not fit together…
Some time ago I found a silicon tube stopper on thingiverse - but it didn't fit tubes sold here (those are 16mm OD of the screw) So I made a new one - but it didn't seal well And then I designed this model, it has space at the bottom (or…
🎯 Silicon PRO 3in1 è lo strumento definitivo per ogni amante del fai-da-te e per i professionisti della sigillatura! Con il suo design ergonomico a freccia e le tre punte intercambiabili, questo accessorio rende ogni lavoro di silicone…
Ergonomic silicone scraper Sometimes I need to replace the silicone around the bathtub, so I used my experience in 3D modeling and created this silicone scraper. The scraper can also be used on the printing plate as a bed scraper !! The…
Stand for MacBook Pro 2021 14 / 16 (M1 Pro, Max ) Upon looking at the sizes for the M2 MacBook Pros, this stand should still work, though I don't have a computer to test it. Printed in PLA 0.2mm Layer height 10% cubic infill No supports…
