P
PrintablesConnor Pritchard
Hinged Case for Ultrasonic Sensor (HC-SR04)
Print settings (example) Raft or Brim: None Supports: No Layer height: 0.2 mm Infill: 100 % Screw hole is 4mm diameter.
- Pobrania
- 3045
- Polubienia
- 512
- Ocena
- 5
Wyniki wyszukiwania: sr04
109 modeli
P
Printablesplog
HC-SR04 ultrasonic sensor mount for 9G micro-servo
Currently refining a small obstacle avoiding mecanum robot for an introductory robotics club and needed a simple mount for a servo driven ultrasonic sensor. This design is a single piece print with no supports that printed quickly in PLA+…
- Pobrania
- 1709
- Polubienia
- 39
- Ocena
- 4,5
P
PrintablesBalex
Ultrasonic sensor HC-SR04 mount on servo
Just added the smile like on the original design https://www.thingiverse.com/thing:1364024 :-) Fits perfectly Ultrasonic HC-SR04 sensor and standard servo mount Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2…
- Pobrania
- 1538
- Polubienia
- 36
- Ocena
- 5
P
PrintablesMarek
HC-SR04 Ultrasonic sensor case
This is the case for HC-SR04 ultrasonic sensor (RED VERSION). The blue one has diffrent dimensions and is not compatible with this case. Print Settings Rafts: No Supports: No Filament: Doesn't matter Category: DIY
- Pobrania
- 948
- Polubienia
- 24
- Ocena
- 2
P
PrintablesKiko64
HC-SR04 minimal case
a minimal case for a HC-SR04 sensor, fits without screwing.
- Pobrania
- 894
- Polubienia
- 51
- Ocena
- 4,75
P
Printablescohenco
Ultrasonic sensor case (HC-SR04)
Print with 20% infill After printing, the case is ready to slide onto the transmitter and receiver on the HC-SR04.
- Pobrania
- 727
- Polubienia
- 21
- Ocena
- 4,5
P
Printablesspeedmonster
HC-SR04 Case
This is a case for a HC-SR04 ultrasonic sensor which is part of water level meter project by using Arduino. The case printed using TPU. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2…
- Pobrania
- 648
- Polubienia
- 17
- Ocena
- 4
P
PrintablesNaesstrom
ultrasonic sensor (HC- SR04) bracket servo mounted
I just flattened the foot and added a groove for a servo mount instead at the bottom. A great tutorial on how to make a arduino radar can be found here: http://howtomechatronics.com/projects/arduino-radar-project/ Category: Engineering
- Pobrania
- 608
- Polubienia
- 20
- Ocena
- 4,33
P
PrintablesSavageRodent
HC-SR04 Casing + Angle Adjustable Cradle
This is a casing & supporting cradle for HC-SR04 (Ultrasonic Distance Sensor). Key features: No screws or adhesive need to assemble the unit itself. The vertical angle of the HC-SR04 can easily be adjusted by tilting it up or down in the…
- Pobrania
- 608
- Polubienia
- 83
- Ocena
- 4,71
P
PrintablesTomKnox
HC-SR04 Ultrasonic Sensor Module
Arduino compatible Ultrasonic sensor Buy the HC-SR04 Sensor HERE
- Pobrania
- 513
- Polubienia
- 17
- Ocena
- 5
P
PrintablesRCWeinstadt
JSN-SR04T ultrasonic distance sensor Holder
5° tiltet holder to correct the tilt of the sensor
- Pobrania
- 446
- Polubienia
- 12
- Ocena
- 0
P
PrintablesFonsoPrints
HC-SR04 minimal case (NO SCREW HOLE)
On my occasion I will end up gluing the box to another surface :)
- Pobrania
- 404
- Polubienia
- 10
- Ocena
- 5
P
Printablesnikoster
HC-SR04 Ultrasonic Sensor Mount
Use M3 screw for installing
- Pobrania
- 396
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBartBE
Housing for Nocemcu and HC-SR04 ultrasonic distance sensor
This is a housing for a NoceMCU v3 and an HC-SR04 ultrasonic distance sensor. The lid will stay on when held upside down, but it's easy to remove. I designed this together with my son as an introduction to 3D modeling. Print Settings…
- Pobrania
- 390
- Polubienia
- 25
- Ocena
- 0
P
PrintablesPablo Cruz
JSN-SR04T Water Level Sensor Case
I used JSN-SR04T waterproof ultrasonic sensor to calculate the water level in a water tank. The idea is to calculate the distance to the water level and use that number to calculate the volume of water inside the tank. The sensor is…
- Pobrania
- 383
- Polubienia
- 26
- Ocena
- 0
P
PrintablesMike
Ultrasonics mount (HC-SR04 to SG-90)
This is a printable design to mount the HC-SR04 ultrasonics sensor to the Micro SG-90 To make this design work you'll need four small screws (or two - for each opposing corner) to mount the ultrasonics sensor to the print. And you'll need…
- Pobrania
- 377
- Polubienia
- 15
- Ocena
- 5
P
PrintablesDerek Purdy
JSN-SR04T Case with Lid
JSN-SR04T Waterproof Ultrasonic Distance Measuring Module case with lid. Feel free to remix if needed, the lid is very tight the first time you try to put it on. I need to find a way to get it to not move around so much inside even…
- Pobrania
- 327
- Polubienia
- 14
- Ocena
- 5
P
PrintablesNahuel
HC-SR04 Ultrasonic Range Finder Mount - Arduino Smart Car
This is a set of mounts you can print to hold your HC-SR04 Sonar Range Finder in the front (or back) of an Arduino Smart Car. The images show how to mount it. Please note that the three of them have different mount shapes to match the…
- Pobrania
- 317
- Polubienia
- 31
- Ocena
- 5
P
Printablesideenwerk.me
GoPro-hinged mount for AJ-SR04M / JSN-SR04T ultrasonic distance sensor
purpose this mount offers rugged angular adjustment even on rocking platforms for sensors AJ-SR04M / JSN-SR04T, used in many arduino/raspi-zero etc projects. material if you platform is used in direct sunlight, don't use PLA, as it will…
- Pobrania
- 314
- Polubienia
- 10
- Ocena
- 0
P
PrintablesJohn
HC-SR04 Ultrasonic sensor waterproof mount
This is my latest attempt to get the HC-SR04 to measure reliably the water level in a tank. Previous attempts with the waterproof JSN-SR4T ended in erratic results due to multiple reflections from the tank walls especially at low water…
- Pobrania
- 309
- Polubienia
- 15
- Ocena
- 5
P
Printablesp2baron
Case and bracket for D1 mini and JSN-SR04T ultrasonic sensor
Description This case is designed to house a Wemos D1 Mini and a JSN-SR04T ultrasonic distance sensor. It’s ideal for use with ESPHome and Home Assistant to measure distances, such as monitoring the level in a water tank. Design Overview…
- Pobrania
- 304
- Polubienia
- 26
- Ocena
- 4,67
P
Printablesx3beche
HC-SR04 Holder
This is a custom-designed holder for the HC-SR04 module, ensuring secure mounting and alignment. It features: Top or Bottom Mounting : Two M3 holes with a 20mm center-to-center distance for attaching the holder to other surfaces. Also…
- Pobrania
- 285
- Polubienia
- 10
- Ocena
- 0
P
PrintablesFilgy
JSN-SR04T ultrasonic sensor lid mount for IBC water tank
This mount is used for mounting JSN-SR04T water level ultrasonic sensor on top of the IBC lid.
- Pobrania
- 243
- Polubienia
- 19
- Ocena
- 0
P
Printablesgregor_autischer
ESP32 Ultrasonic Water Level Sensor Housing (with HC-SR04 Mount & Cutout Template)
This 3-part 3D printable housing system allows you to install an ESP32 and HC-SR04 sensor into a waterproof container or tank lid for use as a smart fill level sensor. It’s perfect for home automation projects using ESPHome and Home…
- Pobrania
- 240
- Polubienia
- 15
- Ocena
- 0
P
Printablessmysnk
HC-SR04 Mount
Requires BS_Joint.stl from https://www.thingiverse.com/thing:2427726 Category: Electronics
- Pobrania
- 207
- Polubienia
- 11
- Ocena
- 0
P
PrintablesTodward
Case for HC-SR04 ultrasonic sensor
This is a case for the HC-SR04 ultrasonic sensor. I made it especially for outdoor use because I need a sensor for measuring the water level of water tanks. The sensor cable can be fixed with a cable gland (M12). If you fill the case with…
- Pobrania
- 192
- Polubienia
- 17
- Ocena
- 0
P
Printablesisaacramirezd
HC-SR04 ultrasonic sensor, wall support
This supports are designed to hold the HC-SR04 ultrasonic sensors to the wall. It is ideal for monitoring the level of your tnaks or your wells. The two pieces are holded together with two screws and the cable of the sensors passes…
- Pobrania
- 182
- Polubienia
- 19
- Ocena
- 5
P
PrintablesCatniped
HC-SR04 ultrasonic sensor holder for ORP
an open robotics platform ( https://openroboticplatform.com/ ) compatible holder for the HC-SR04 ultrasonic sensor. attaches with 2 M3 flatheaded screws (height of the head of the screw should be around 2mm). sensor is easy to mount,…
- Pobrania
- 176
- Polubienia
- 9
- Ocena
- 0
P
PrintablesKevin
HC-SR04 mount.
Printed with Prusament Jet Black 0.3mm supports are required.
- Pobrania
- 175
- Polubienia
- 10
- Ocena
- 0
P
Printablesanonxyz
HC-SR04 Distance Sensor + M3 Mount
Accurate model of the HC-SR04 Ultrasonic Distance Sensor along with a 3d printable mount for it.
- Pobrania
- 164
- Polubienia
- 3
- Ocena
- 0
P
PrintablesaRGiRob
hc sr04 case
this is a remix of the original H-SR04 minimal case by KIKO64. i tagged this as a remix but it not really a remix since i designed it from scratch also adding some different backs. the reason why i made this is that my chinese sensors are…
- Pobrania
- 163
- Polubienia
- 14
- Ocena
- 0
P
PrintablesArchie Haddley-Morris
Ultrasonic sensor case (HC-SR04)
I printed in 0.2 mm nozzle on a p1p with a basic autogenerated tree support
- Pobrania
- 158
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJensa
Bracket for HC-SR04 Ultrasonic sensor
Pointed at 10 degree angle, to look down at stuff
- Pobrania
- 156
- Polubienia
- 8
- Ocena
- 4,5
P
Printablessilvestre125
JSN-SR04T ultrasonic sensor lid insert for IBC water tank
This JSN-SR04T Ultrasonic Sensor Lid Insert is designed for use with IBC water tanks. It's an easy way to install an ultrasonic sensor to measure water levels accurately.
- Pobrania
- 142
- Polubienia
- 5
- Ocena
- 5
P
PrintablesAdam Thomas
SparkFun Qwiic Ultrasonic Distance Sensor Case HC-SR04
This is a case for the Qwiic Ultrasound Sensor https://www.sparkfun.com/products/17777 that can be mounted from behind. It also works with the identical (apart from colour) Zio Ultrasound Distance Detector…
- Pobrania
- 124
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLC-3D
HC-SR04 distance sensor mount for Joy-It robot car
For a school project we are using the Joy-It robot car. On this car we have to mount 2 HC-SR04's. I did this with the help of this (self-made) model. As you can see the sensor fits perfectly in the mounting piece and the mounting piece…
- Pobrania
- 115
- Polubienia
- 7
- Ocena
- 0
P
Printablespico
SR04T - Ultrasonic distance sensor cone
Threaded cone for ultrasonic distance sensors. Thread diameter: 28 Thread pitch: 2mm Heigth: 66mm Outer diameter: 44mm Inner diameter: 21.8mm Category: Parts
- Pobrania
- 110
- Polubienia
- 3
- Ocena
- 0
P
PrintablesThomas
SR04M Mount
simple mount to put a SR04M (or SR04T) to a beam on my carport to detect a parked car
- Pobrania
- 108
- Polubienia
- 7
- Ocena
- 0
P
PrintablesH_MasterPro
HC-SR04 Box
La caja es rectangular, de color negro y con un diseño minimalista. Presenta un hueco en uno de sus lados, especialmente pensado para permitir la conexión de los pines del sensor HC-SR04. No tiene líneas ni detalles adicionales en la…
- Pobrania
- 107
- Polubienia
- 11
- Ocena
- 0
P
PrintablesChris Twomey
HC-SR04 + HC-SR501 Casing + Angle Adjustable Cradle
Remix from https://www.thingiverse.com/thing:1799012 Allows housing for both HC-SR04 and HC-SR501 for when you need both motion and distance detection. It also fits a small microcontroller in the rear, though you will need to use glue or…
- Pobrania
- 107
- Polubienia
- 14
- Ocena
- 0
P
Printablessimchill
HC-SR04 sensor bracket
Sensor bracket for the HC-SR04 sensor . Using this bracket you can mount the sensor on top of a servo motor.
- Pobrania
- 106
- Polubienia
- 7
- Ocena
- 0
P
Printablesphillycheeseman
JSN-SR04T Sensor Mount
JSN-SR04T Sensor Mount v11
- Pobrania
- 106
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKlausellus Wallace
JSN-SR04T Sensor mount
Hexagonal sensor mount for JSN-SR04T ultrasonic sensor
- Pobrania
- 105
- Polubienia
- 3
- Ocena
- 0
P
Printablespixeltoplastic
Rotating Ultrasonic Sensor Mount (HC-SR04) with SG90 Servo Housing
This is a custom-designed scanning mount for the HC-SR04 Ultrasonic Distance Sensor , specifically engineered for obstacle-avoiding robots and Arduino projects. The design consists of two parts: Servo Base: A cylindrical housing designed…
- Pobrania
- 93
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTony3670
ultrasonicsensor arduino hc-sr04 mount/holder
hc-sr04 sensor compatible with an arduino It's easy to attach the model to a contruction with bolt and nut or screws. No specefic printing instruction needed.
- Pobrania
- 84
- Polubienia
- 0
- Ocena
- 0
P
Printablesgeokscott
Ultrasonic outdoor sensor JSN-SR04T and waterproof DS18B20 digital temperature sensor
This is a mounting bracket that holds a JSN-SR04T ultrasonic sensor and waterproof DS18B20 temperature sensor for mounting to a 1" square tube. This is part of a project to measure the water level of a creek. The sensor will be extended…
- Pobrania
- 82
- Polubienia
- 5
- Ocena
- 0
P
PrintablesAntonin Kadrmas
Holder for HC-SR04 (M3)
Holes in this model is modeled for M3 screws . The hole is in the middle of the bottom part. Sizes on pictures are in millimeters.
- Pobrania
- 80
- Polubienia
- 6
- Ocena
- 5
P
Printablesdgemily
ultrasonic sensor case HC-SR04
A cute Alien design for an ultrasonic sensor (HCSR04) enclosure. It's a snap-fit box and doesn't need any screw..
- Pobrania
- 79
- Polubienia
- 6
- Ocena
- 0
P
PrintablesStobbart
Fixation aimantée HC-SR04
Boîtier pour capteur ultrason HC-SR04 destiné à la fixer à l'aide de deux aimants de diamètre 15 mm. Deux parties imprimables.
- Pobrania
- 77
- Polubienia
- 12
- Ocena
- 0
P
PrintablesMr.KoiFish
Utrasonic sensor HC-SR04 holder
Hello, I'm uploading my own version of an ultrasonic HC-SR04 sensor holder. This design has a tight fit, so please be careful when inserting the sensor. To print, please place the gadget in the orientation shown in the photos. This will…
- Pobrania
- 73
- Polubienia
- 5
- Ocena
- 0
P
Printablesebarnes
SR04 Distance Sensor Case
This is a case I drew to hold my SR-04 that I use for Inventr.io lessons and also for DIY prototyping projects. It snaps together requiring no glue. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Yes Supports: No…
- Pobrania
- 70
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAWSW
20x20 profile HC-SR04 Ultrasonic Distance Sensor holder
20x20 aluminium profile HC-SR04 Ultrasonic Distance Sensor holder. Printing instructions: 0.2 speed profile. Supports active from the print bed. Happy printing =)
- Pobrania
- 69
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPenke Electronics
Sensorgehäuse Sensorhalter Ultraschallsensor HC-SR04
Dieser hochwertig 3D-gedruckte Sensorhalter wurde speziell für den HC-SR04 Ultraschallsensor entwickelt und sorgt für eine sichere, stabile und passgenaue Befestigung in deinen DIY- und Elektronikprojekten. Ideal geeignet für den Einsatz…
- Pobrania
- 69
- Polubienia
- 8
- Ocena
- 0
P
PrintablesVictor Gusev
HC-SR04 stand
This model holds up an HC-SR04 ultrasonic sensor upright for easy use. The photo shown is tpu, however it should work with other materials such as PLA or PETG. useful for robotics applications. 2 models, one shorter one and one taller…
- Pobrania
- 68
- Polubienia
- 2
- Ocena
- 0
P
PrintablesVojtěch Šalbaba
JSN SR04T Water Proof Integrated Distance Measuring Transducer Sensor Holder
Holder intended to be glued into DN600 manhole ring
- Pobrania
- 60
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNotLikeALeafOnTheWind
8020 mount HC-SR04 Ultrasonic Distance Sensor w-cable tie
This 8020 series 10 mount adds a connection point for wire ties. It does not need a special printed tool to remove the sensor from the mount. It can be used standalone. Print instructions Category: Electronics
- Pobrania
- 60
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSachin Agrawal
HC-SR04 Ultrasonic Sensor Mount
We needed to mount HC-SR04 ultrasonic sensors onto our Arduino robot. I couldn't find one that had the right dimensions, so I made my own. The sensor technically goes in upside down, which allows for easier access to the pins. Attachment…
- Pobrania
- 58
- Polubienia
- 2
- Ocena
- 0
P
Printablesantonio2709
caja arduino hc sr04 y pantalla lcd 16X2
caja Arduino con hc sr04 y pantalla lcd 16X2, además cuenta con un interruptor y un puntero laser para saber donde estas midiendo
- Pobrania
- 58
- Polubienia
- 8
- Ocena
- 0
P
Printableswalidmafuj
AJ SR04 M cover
Simple cover for water resistant distance sensor aj sr04m. the outer diameter of the sensor is 23mm.
- Pobrania
- 54
- Polubienia
- 0
- Ocena
- 0
P
PrintablesF1sh
HC-SR04 case
A case for a HC-SR04 ultrasonic sensor with 4,5 mm fastening holes.
- Pobrania
- 51
- Polubienia
- 0
- Ocena
- 5
P
Printables3d modeli
подставка для ультразвукового датчика HC-SR04
Больше интересного в моём тг канале https://t.me/detaliAnton
- Pobrania
- 51
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKevin
HC-SR04 Double Mount
Printed with Prusament Jet Black 0.3mm supports are required.
- Pobrania
- 49
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBart
JSN-SR04T enclosure
JSN-SR04T enclosure works with v2 and v3 sensors, can be mounted two different ways - from bottom or top, includes seals if you print boxes in PETG and seals in TPU, or can print the whole box with full lids in TPU90 works great cable box…
- Pobrania
- 45
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMagig_I3Prusa
iltrasonoc sr04 mount Simple FDM fastprint
prytti simple mount for the ultrasonic sensor to be fasten at some plete small holes closed for fast good front plate print
- Pobrania
- 44
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKaluschke
Housing for Raspberry Pico W and HC-SR04 ultrasonic distance sensor
Housing for Raspberry Pico W and HC-SR04 ultrasonic distance sensor small design, with holes for LED and BOOTSEL button the contacts for the HC-SR04 need to be bent over or better solder them other direction. enough space to connect them…
- Pobrania
- 43
- Polubienia
- 3
- Ocena
- 0
P
Printableshectare3D
Ultrasonic Sensor(HC‑SR04) Stand
This simple 3D‑printed stand holds a standard RCWL‑1601 (HC‑SR04‑compatible) ultrasonic distance sensor upright and stable on a desk. I designed it for primary & middle‑school STEM lessons so students can: plug jumper wires into the…
- Pobrania
- 42
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBrikkitronMaker
Lego-compatible Brikkitron enclosure for HC-SR04 distance sensor
This is a Lego-compatible enclosure for an HC-SR04 ultrasonic distance sensor. These sensors almost always come in the same form factor, but the circuitry on the back-side may differ. The provided enclosure should be compatible with…
- Pobrania
- 40
- Polubienia
- 8
- Ocena
- 5
P
PrintablesRe_Fan
HC-SR04 Ultrasonic Sensor Simple Case
Case for HC-SR04 ultrasonic sensor, can be mounted using 3M double tape
- Pobrania
- 40
- Polubienia
- 0
- Ocena
- 0
P
PrintablesChris Ko
5° angled AJ-SR04M / JSN-SR04T Adapter for 25mm PVC pipe
This is a 5° angled AJ-SR04M / JSN-SR04T Adapter for 25mm PVC pipe. The ultrasonic sensor will sense right down the pipe. I'm using it for liquid level measuring in small (25-80L) containers. Has little holes in the sides to allow air in…
- Pobrania
- 39
- Polubienia
- 1
- Ocena
- 0
P
Printablesabasson
Outdoor Snap-Fit Enclosure for ESP32-S2 Water Tank Level Monitor (JST-SR04T, WS2812 LED Support)
This is a purpose-built outdoor enclosure designed for a JoJo tank level monitoring project utilising an ESP32-S2 microcontroller and JST-SR04T waterproof ultrasonic sensor . The case features: Snap-fit lid for tool-free assembly while…
- Pobrania
- 38
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKurodo
Assembly for ESP32 and HCSR04
I started with [thingiverse/thing:3738687 by SantiMZ], and added an assembly for the ESP32 and the associated electronics. All parts are inserted in a standard PVC pipe which is fixed on top of a water tank. A mobile cover protects the…
- Pobrania
- 36
- Polubienia
- 0
- Ocena
- 0
P
Printablesdavidgsieiro
HC-SR04 CAR HOLDER
Designed for installing in robotic standard chasis car used in educational robotic. Need two M2 screws (and nuts) for holding to chasis.
- Pobrania
- 35
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKDM3Dmodels
HC-SR04 ultrasonic sensor
This 3D model is for creating for designs in your labs or pictures or making hole in some containers
- Pobrania
- 34
- Polubienia
- 5
- Ocena
- 0
P
Printablesmuchtall
Morton MC30 Water Softener HC-SR04 Ultrasonic Salt Level Distance Sensor Bracket
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) This is a bracket for mounting an HC-SR04 ultrasonic distance sensor inside the salt well of a Morton MC30 water softener. This is part of a Home…
- Pobrania
- 34
- Polubienia
- 0
- Ocena
- 0
P
PrintablesYuri
HC-SR04 spectacles
Glasses for HC-SR04 ultrasonic range finder. Very snug fit. Won't come off during battle. ;) Print instructions Category: Robotics
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBeardedBabs
HC-SR04 50mm PVC pipe adapter
Adapter to hold a HC-SR04 in a 50mm PVC pipe. I use it as a water level sensor, with a ping pong ball inside. To make HC-SR04 waterproof, I coat the PCB with nail polish after soldering proper cables instead of default connectors.
- Pobrania
- 30
- Polubienia
- 1
- Ocena
- 0
P
PrintablesChristophe Landrain
HC-SR04 ultrasonic sensor bracket (to fit on chinese robot car)
This was made as an upgrade to a DIY ESP32-CAM-based robot car. The bracket was made to fit under the ESP32-CAM module, using the same screws. PLA print (0,20 layer height, 0,4 nozzle). Made to integrate with this car body:…
- Pobrania
- 30
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNorm807
Water Softner Salt level sensor bracket for HC-SR04 sensor
Remixed Wiktor's HC-SR04 case and added it to a bracket to fit our salt tank. Also remixed the lid to fit the case and bracket. This fits our tank with the lid on so I didn't have to drill a hole in my tank lid. Uses a D1 Mini esp board…
- Pobrania
- 27
- Polubienia
- 2
- Ocena
- 0
P
PrintablesH4DeS
Case for HC-SR04 (mounting in Arduino Car)
I printed using 0.2mm of layer high and 15% infill, but you can increase the fill depending how much resistance you'll need. Also, I used supports, but the model is able to print off supports, in this case, may you need to adjust the…
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
PrintablesH.Dot
XRP Proposal with HC-SR04 Ultrasonic Sensor
This model is based on the concept of a XRP Robot, it uses two back wheels and only one at the front, three HC-SR04 Ultrasonic Sensor and a Raspberry Pi Pico as a controller plus a motor controller for the motors. It can be used as a…
- Pobrania
- 25
- Polubienia
- 13
- Ocena
- 0
P
PrintablesAndy Forsberg
SR04 Ultrasonic adapter for Blistik's Pan & Tilt
This is a replacement part for Blistik's Mobius Pan & Tilt. This part allows the use of a HC-SR04 ultrasonic sensor with the Pan & Tilt mount. (use with these parts: https://www.thingiverse.com/thing:1401116 ) The ultrasonic sensor is…
- Pobrania
- 23
- Polubienia
- 2
- Ocena
- 0
P
Printableskjoh
HC-SR04 Board Mount with LED
Thanks mayaway for creating the original. Changed a couple of things, adding an LED that's connected to the echo pin (with a current limiter in series). It will pulse the same length of time as the echo pin is pulled high, so short…
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMichael Eichinger
HC-SR04 wallmount - casted
Assembly Instructions This enclosure consists of three 3D-printed parts designed to encapsulate an HC-SR04 ultrasonic sensor in acrylic casting resin for improved durability and water resistance. Parts Part A — Baseplate Part B — Front…
- Pobrania
- 22
- Polubienia
- 1
- Ocena
- 0
P
Printableswmnl
Watertank fitting with JSN-SR04T level sensor & optional Pump Power Cable Cutout
This is a 3D-printable adapter designed for water tanks with a 2-inch buttress thread. The design features: A hole to accommodate the JSN-SR04T ultrasonic sensor for water level measurement. A passthrough for a 30mm water hose A…
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
PrintablesArjan
housing for hc-sr04 sensor
housing for sensor for use as level sensor for pond
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesArtur
Case for 2x HC-SR04
The case allows for mounting the sensors in the shelf recess. Used for the presence sensor in the toilet. Width: 161mm Depth: 46mm Height: 25mm Printer: Ender 3 Material: PLA Resolition: 0.2
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSirCabbages
HC-SR04 Micro Servo Mount
A HC-SR04 mount for micro servo with metal gears. Can mount 2 HC-SR04 sensors. Sensors are mounted 7 degrees above ground.
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
Printablesthesugarqueen
HC-SR04 Ultrasonic sensor mount for X axis - Elegoo Neptune3
Elegoo Neptune 3 doesn't support M300 and I needed to know when to tap on Print again because I was printing multiple copies of the same model. So I connected an Arduino and an HC-SR04 ultrasonic sensor to a buzzer (also tried with an…
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
Printablesthe_smart_home_maker
Holder to attach ultrasonic outdoor sensor JSN-SR04T to a SolarEdge / KEBA EV charger
This is a holder to attach your outdoor ultrasonic sensor JSN-SR04T to a SolarEdge / KEBA EV charger. I use this to detect whether my car stands in front of the garage and if so, to block opening / closing the garage door. This prevents…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
Printablesjulian428
HC-SR04 adjustable holder
A HC-SR04 holder with a adjustable print in place mechanism. Built in support.
- Pobrania
- 18
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPavel Chaloupka
JSN-SR04T_Holder_Tube
Because min distance is aprox. 200mm, I made the longer tube for this mount. Extender.
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDerek Purdy
1.5" ABS Pipe mounted bracket for HC-SR04 to monitor Sump Pump Level
1.5" ABS Pipe mounted bracket for a HC-SR04 to monitor Sump Pump Water Levels. May want to just drop some hot glue on the corners to stop it from falling out if you adjust or move it. Remix of https://www.thingiverse.com/thing:4595852 and…
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
Printablesottojo
SR04 Stand
Use this as a debug stand for the SR04. Using it on a breadboard is not that useful because you cant move it easily. Just use a bit of hotglue to hold the sensor in place! Category: Electronics
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTeeVau
Remix Ring for HC-SR04 Casing.stl
The Ring does not fit strong enough for me. Made just a ring with the same out diameter but a smaller inner diameter. Now it fits perfect, with a little bit of strength. Use all other parts of thing:1799012 . Print Settings Rafts: No…
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
Printablesözcan inan
Rotatable HC-SR04 ultrasonic sensor support
You can fix bottom part (DisiDisli) and keep support free or just fix all. I shared both in case but I fixed all together finding the right angle. =)
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0