Liczymy pasujące modele…
I used 4 m3x30 and 2 m3x20 socket head bolts and nuts. I printed it with carbon fiber petg with 60% infill but I recommend the highest infill youre comfortable with. The grips are pla and 20 to 30% infill is fine for them.
attach to your ps4 controller and get racing
Skid-steer loader (Easy print - NO SUPPORTS) for some parts like seat, body, cage and axis caps use glue Print settings 0,2mm layer 3 walls (for axis use 5 walls) 15% infill (for axis and inner part of wheels use 50% infill) for long axis…
GR.3S DIY Steering Wheel Disclaimer: This project has reached end-of-life status and will no longer receive updates or ongoing support. All current and upcoming projects are now available exclusively through my webshop . PERSONAL USE…
What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have laying around...also skateboard bearings superglue WARNING: over time the frame will create shiny patches on your…
What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have laying around...also skateboard bearings superglue WARNING: over time the frame will create shiny patches on your…
add al the components together! start racing! :)
Formula 4 Steering Wheel with Assembly Guide This project contains the components to build a Formula 4 style steering wheel that is compatible with popular sim racing software SimHub. This is the same style of wheel used in the iRacing…
I designed and tested these replaceable parts for the Jiabaile 1/43 drift car. They increase the steering angle and make the car more controllable and suitable for tight race tracks. It’s a bit more consistent regarding the angle of…
The original version is far superior to the stock steering arm. I modified it so the slotted piece of the arm that attaches to the servo was longer. The original model would make the front end dip down when steering extreme left or right.…
A Power HD Storm 15 steering servo arm finely tuned to the Traxxas 4 tec 2.0 (25T)
Modeled by trial and error. Fitment will be slightly off so shape it with sandpaper. Print face down and use supports. I used ABS+ to prevent warping on a hot summer day. Used body filler to fill the imperfections before painting. The…
Quickly throwing this together so I can post it to LoyalMoses… maybe a last minute model entry? maybe? Stomp Test Passed. This model follows the 2024 Christmas Community Print Drive Standards.
Garmin Edge Mount for the steering column in 2 parts: The Base is attached to the steering column with the original steering column cover screw. The Mount is attached to the Base with 2 M3x10 conical head screws. Drill 2.5mm holes at the…
Printing Instructions: All printed parts are made from PLA and should be printed in the orientation in which they appear. Part Strength Support Bed 15% No Motor Retainer 100% Touching Buildplate Oar 100% No Oar_Short 100% No Oarlock 100%…
The weight for 100% density ABS is ~47 grams.
Just print it and it should be good.
I made spare tracks for my rc skid-steer, because i had to much grip on carpet or hard surface with the original tracks. Due to the high grip level of the original tracks, they often slip off the wheels when i turned the loader. With the…
What is a dashboard without steering wheel and steering column. I designed this so that it looks a bit real and do not forget the turnswichtes. to make the flashing light switch fit, you have to cut it in the middle. the holes in the…
Edited version of the original (https://www.printables.com/model/181710-logitech-g29g920-steering-wheel-magnetic-paddle-sh) to fit a pair of 20x6x1.5mm magnets on both sides. I used magnets with a 1.6kg pull force that I had laying…
These items are for making the F06/F10 steering wheel unlock and engage the SZL on E8x and E9x BMWs when swapping to the newer steering wheel. Print from a temperature-tolerant filament (e.g., ASA, ABS, PETG, PA6/PA12) and affix in place…
Laegendary Thunder truck replacement part. Left and right sides available. You may need to ream out the holes for the bearings and bushings depending on your printer settings.
Easy to print without supports and easy to assemble using screws. PLA, infill 50% (it is strong enough, no need to make 100% infill). Use rubber band between steering and modell. I recommend to use Velco Strap to stabilise U-lock position…
This is a printable replacement for the steering horn for a Tamiya DT-01. Since I happened to be missing a steering horn on a DT-01, I thought it logical to make a printable file for one. It fits exactly the same way the original part…
Like most 2nd gen S10 pickups and blazers, the plastic dash parts have broken into pieces. The recessed mounting holes on the underside of the steering column panel are a common break point. Rather than buy a whole new panel, I made these…
Youtube video: https://youtu.be/TWOMCni3EWI This 3d printed project is another remote controlled toy robot that is driven by a single motor. It can move forward or spin in place. It uses a two way to one way rotation mechanism to…
I designed this part to adapt a standard ATV rubber boot on the steering column universal joint of my B9 A5. This joint is a weak component. Printing: PLA 15% infill, .4 nozzle, 3 walls, manual supports on the surfaces shown on the pics.…
Change color settings at 1,09 hight
I made this boat rudder for my boat project that can fit in my coreless motor
Multicolor print Symbol for autopilot/autosteer, based on ASABE symbols standard
This connector plug fits the control port on a electric power steering pump to 02-08 Mini Cooper's. The units have 3 control pins and a main 12v power plug. To start the pump, pin-1 needs to be connected to 12v+, and then pin-2 needs only…
This is a simple Parallel movement demonstrator. This is one of several solutions to the problem of steering and parallel control. It will need (3) M3x.5 @ 8mm screws, for which I highly recommend pre-tapping the holes in the base.…
A simple remix for @tig33rs original bracket that removes the paddle shifter mounts.
Like most 2nd gen S10 pickups and blazers, the plastic dash parts have broken into pieces. The recessed mounting holes on the underside of the steering column panel are a common break point. Rather than buy a whole new panel, I made these…
Honda NT1100 Steering Wheel Nut Cover This steering wheel nut cover is designed for the Honda NT1100, created using PLA filament with a 15% infill and no supports required for printing. The design includes two variations: one with a logo…
I broke my ACXWA steering arm on my miot and i got a 3d printer so i remixed it with a wider head and bigger holes. If the steering binds at full lock use a zip tie (check image) and that should work very well. Also you its a high…
As it is described in a title ;) In short - this is the ONLY WAY to solve ALL wltoys12428 steering issues! buy cheap parts from ali - https://s.click.aliexpress.com/e/_DCCUMIV print base and top plate from this topic print servo holder -…
Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…
This model was made to design a mechanism to control the steering wheel using Ag Open GPS
-Parts List: M3 Screw (atleast 16mm long) M3 Nut (can also be replaced with a threaded insert) Plastic Glue -Assembly: Put some grease on the shaft then put one half of the knob on the shaft so it slots in and can rotate freely then glue…
¡Absolutamente! Aquí tienes algunas opciones para tu maqueta de geometría de Ackermann: Título: Maqueta de Geometría de Ackermann 3D Visualiza el Ackermann: Maqueta Imprimible en 3D Comprende el Ackermann: Modelo Físico Interactivo…
This model is designed for PLA filament for strength and rigidity. I would recommend that you tweak the design to fit any vehicle you choose- this is designed to fit standard bearings but you can scale and adjust the model files as you…
Check LOG bellow for changed parts! _ INTRODUCTION This controller is a 3-axis + 15-button HID, designed with Euro Truck Simulator 2 in mind. It also works with other games. The steering wheel has 900 degrees of rotation and force…
DirectForce Wheel 🏎 📄 Description DIY Direct Drive steering wheel, powered by a hoverboard motor! This project includes a fully 3D printable enclosure, essential mounting parts, components list and a build guide, ensuring a solid and…
I printed mine in a fuzzy texture to hide the layer lines but it can be printed just fine without texturing too. If using the STI panel with the inlay text, it could be filled with paint, or there is a cutout version for using a colored…
Formula 4 Steering Wheel with Assembly Guide This project contains the components to build a Formula 4 style steering wheel that is compatible with popular sim racing software SimHub. This is the same style of wheel used in the iRacing…
Multicolor print Symbol for autopilot/autosteer, based on ASABE symbols standard
Modeled this adapter with the conspit wheels in mind The hexagon and triangle piece I reccomend manufacturing in Aluminium 6mm plate The cilinder has a diameter of 75mm, length of 28mm, the hole in middle has a diameter of 20mm, and 4…
I designed this part to adapt a standard ATV rubber boot on the steering column universal joint of my B9 A5. This joint is a weak component. Printing: PLA 15% infill, .4 nozzle, 3 walls, manual supports on the surfaces shown on the pics.…
I was not going to upload this as it's not perfect, but here you go. You need a standard skate or fidget spinner bearing . Printed bearing for this exist but are for from good IME. Superglue the bearing to the middle because it will move…
I purchased a Motion Pro 08-0550 Steering Head Bearing Race Driver Set and wanted a holder to put them in my toolbox, the race adapters snap in place.
4/23/2026: UPDATED I made a new version that is much stronger and correctly lines as if it were in the original mount. This also works for the XTS-S10 Rally Car, and I assume the upcoming Short Course Truck. I wanted to get rid of the…
Center cover for steering wheels for sim racers or real race cars with QR 70mm. I designed 3 versions: Simagic style - only 3 holes - other holes are hided undeer the cap. You need to use special screws. Rounded cap - rounded cap with all…
This is upload of files that I played with to control one handed my RC cars and Boats transmitters. The objects consist of rings that attach to the radio controller wheel and grip objects that attach to the ring itself. The rings differ…
I made spare tracks for the LESU rc skid-steer, because it had to much grip on carpet or hard surface with the original tracks. Due to the high grip level of the original tracks, they often slip off the wheels when i turned the loader.…
Crash Derby is a family racing game that mixes strategy with a healthy dose of action . Each player drives their own car, trying to move through the game board as efficiently as possible – but this time, the goal isn’t to cross the finish…
Steering column mount this steering column: https://www.speedwaymotors.com/Steering-Column-Mounting-Bracket-3-4-Inch-Shaft-1-25-1-75-Inch,461403.html This is made for the nexgenefi display but if you have basic cad skills this could be…
If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected. Short introduction: This design is created for 6,5" hoverboard motor with magnetic encoder. At the beginning wheelbase was build around…
3D printed prototype of a steering wheel codenamed tangram , as you can use the same pieces (in theory) to build it as you wish. The difference between theory in practice is bigger in practice than in theory. .step file includes kitcard…
Print with tree supports. The mount for the attachments is brittle, and blade may pull apart once broken free, just slide it back together.
The original HPI Racing mini kahuna monster truck battery (Plazma 7.4v 800mah 2S 35c Lipo) is very small (48.5x24.5x19mm) and the battery compartment is tight around that HPI battery so its impossible to use any other small Lipo in that…
RC CAR PRINTED JLB X HSP TRUGGY 1:8 4WS 4WD (4 WHEEL STEERING X CENTRAL DIFF) Ultra-high-performance 1/8 scale RC car, 3D printable, using standard JLB CHEETAH J3 parts. The design is improved, and much more durable than the original.…
This is simple and functional wall mount for custom steering wheels. It includes 3 parts . Slicing I suggest you print each part separately. I used material ASA (ABS or PETG should be fine or even maybe PLA, but i went with a little bit…
This skid steer loader is modeled after the classic Czechoslovakian UNC 060, a machine still commonly found on construction sites today. Its timeless design makes it a perfect addition to layouts from any time period. The kit comes in…
Description Ultra-high-performance 1/8 scale RC car, 3D printable, using standard JLB CHEETAH J3 parts. The design is improved, and much more durable than the original. Easy Fix, Strong, Modulable, Big battery place, Speed 100Km/h in 4S.…
Attaches to your Xbox One controller to act as a steering wheel
This model is compatible with the lego system.
🔁 Compatibility The 3D prints can be used on any Logitech G29 , Logitech G920 and Logitech G923 . The only print that's specific to a Logitech variant, is the lower bezel , which at the moment is available only for the G29, or PS4/PS5…
The cover is designed to fit without any modifications after removing the original rim. The cover is designed to fit without any modifications after removing the original rim from the button assembly. You need: -bar tape (optional but…
This model is compatible with the lego system.
This model is compatible with the lego system.
Tired of the stock Simagic logo in the center of your steering wheel? This 3D-printable center cover lets you customize your Simagic Neo X 330R Classic or X-350W Drift wheel with any logo or design you want. (it should also work for…
Ever wondered what makes a car steer like magic? Let’s break the gear mechanism down with my fully printable steering gear project!
This connector plug fits the control port on a electric power steering pump to 02-08 Mini Cooper's. The units have 3 control pins and a main 12v power plug. To start the pump, pin-1 needs to be connected to 12v+, and then pin-2 needs only…
Electrical connector for a electric power steering pump from a 02-08 Mini Cooper. You will need 18g wire and two male spade connectors. First print the connector then remove the sleeves from the spade connectors and crimp them on to your…
Introduction Stuff breaks and, sometimes needs to be repaired and restored. I was asked to make a replacement steering wheel for a "vintage" kid ride-on cars restoration. (The restoration was NOT done by me, but i have attached pictures…
I am working on a 1:24 scale Peterbilt. This would be its steering and suspension
Permet de maintenir le levier de frein serré à l'arrêt
I repair and upgrade old RC cars as a hobby. The steering servo required a new housing compartment and custom steering linkage. The car is a 1/10 scale Hummer H2, model number 6018568 Made from standard PLA, no supports. 4 walls, 30…
Replacement cover for the Keya Steering wheel that allows the steering wheel height adjust to be maintained on New Holland and Case International (Case IH) tractors. Keya Motor is used for Autosteer in AgOpenGPS. Also is a switch mount…
Moulds and Moulding stand for the SimbaSim F4 Steering Wheel Contains the 4 moulds (two for each grip) and a moulding stand. You'll need to attach the stand to the wheel plate with a M5 25mm bold and nut. Moulding Grips with Polyurathane…
The geometry of my results of measurements of the VMAX New VX2 (Gear/Hub) steering strut. It allows to design own parts in CAD for the E-Scooter such as brackets for bags or locks If you have any comments, suggestions or similar, you are…
This detailed nautical helm model captures the timeless look of a traditional ship’s steering wheel. Mounted on a sturdy wooden pedestal with side supports and a base console, the sculpt features evenly spaced handles, a central hub, and…
Moulds and Moulding stand for the Turn Racing AMG GT3 Project Create moulded polyurathane moulds with these models. This includes a moulding stand which you can mount your plate and moulds to while you cast them. You'll need to attach the…
Magnetic Shifter Mod This model is a magnetic shifter mod for the MOZA Racing ESX Steering Wheel. The mod will improve your shifting feel. It will feel shorter, more direct, and more aggressive. You can print it without any special…
I made it to replace the broken one in my kitchen, without having to change the entire tap! I printed it on white PETG, it looked really good!
A 3D printed F1 inspired steering wheel (just the steering wheel) with a 2.8" screen, Direct Force Feedback, buttons and even a paddle shifter! Most of the parts are to be 3D printed but some parts like the motor are to be bought since…
Gas tank spacers for the 1992 Ducati 851 and all 1993+ 888 motorcycles. These spacers allow the gas tank to be raised either 3.5 or 4mm, to clear the frame mounting bracket for an Ohlins steering damper. Spacers are placed between the…
A simple remix for @tig33rs original bracket that removes the paddle shifter mounts.
dapter for the dual-spoke steering wheel from the Škoda Felicia , converting the original spline hub into a mount for an M10 threaded rod . Fits into the original ~25 mm spline hub of the wheel and creates a through-hole for an M10…
Perfect for storing a chain lock and some straps. It leaves space to pass the break cables When printing, rotate the smaller bracket upright. Print 2x for one Outer-Pocket Slide M5 nuts into the slots Use small pieces of inner tubes to…
F3/SFL Steering Wheel with Assembly Guide This project contains the components to build a F3/Super Formula Lights style steering wheel that is compatible with popular sim racing software SimHub. This is the same style of wheel used in the…
