Liczymy pasujące modele…
Highlights: MERV 13 filter maintains a good airflow rate while capturing the majority of particulates. HEPA 13 is available for extraction applications. Reusable cartridge uses low-dust coconut-shell activated carbon. Can be used as a…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
Theatre Mask - Comedy/Tragedy
Wydruk około 4,03 €–4,92 € nettoWstępna wycena jednego wariantu
I like to split the bolts down the middle for increased strength. Using a flathead with a deep groove allowed me to easily install it in the shed. I'll do the same for the longer bolt too when I have the time. 6/24/25: Uploaded most…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
2" Back Flap Loose Pin Hinge For Theatre - from the original by J. R Clancy of Syracuse NY. Created by me in Fusion 360. Used as a demonstration item for my drafting students. I printed the body halves at 0.1mm and the pin at 0.05mm
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Wanted a spare RC Masthead Wind Indicator. 1.5mm SS rod, K&S #5126 3/32" brass tube, lead fishing weight, 3D printed vane, 4mm SS bead w/ 1.5 mm hole, 22 gauge wire insulation, super glue and silver solder.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tactile image of the Brazil's Northeast region. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate in Braille). To…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Theater Chair Mug Platform I made this so we could use our theater chair cup holders for Mugs with handles.
Wydruk około 2,29 €–2,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tactile image of the climate in the northeast region of Brazil. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Tactile image of the Brazil's northeast region map. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate in…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
This is an adaptation of the Voron Stealthburner Printhead to be used with the hotend of Bambu Lab X1C/X1 The Bambu Lab X1C and X1 printers show an impressive performance and quality - using a special hotend. The performance of the hotend…
The rest of the files can be found → HERE ←, as well as a description of the necessary parts. The model is put directly on the filament slot on the printhead. Therefore, to change the filament, you will no longer need to remove the tube…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. The boxer configuration with two…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. Printing and Assembly The parts…
I remixed printheadcoverspare.stl by DuckDoCad and added a modified KingCobraHead AM09 from Tow4D.
A simple printhead case replacement for Anycubic Vyper. Main goal was to allow makers to “see” easily when the small strain gauge led is lit (to avoid print head crash into bed). Then I replaced stock air deflectors with wider ones that…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. Printing and Assembly The parts…
This version is printed in one piece and includes a receiver at the top for a PTFE tube. Installation: 1. Attach the filament sensor to its original plate. 2. Fit the sensor with the plate into the mount by tilting the sensor so that it…
A (mostly) realistic model of Shakespeare's Globe Theatre. It comes in four layers that are individually printed (with alignment pins) so there is no extreme bridging or supports required. It also lets you see inside each layer for…
I'm not as professional as OrzOrzOrz and therefore the model might not be as perfect as the original. As for the original, I printed it with the front facing down and used only support for the front fan base. A demo video if the Printhead…
Fit to Parts: Extruders: -Sherpa Mini -Hextrudort -LGX lite -HGX lite -Orbiter 2.0 -Orbiter 1.5 (see adapter plate) -Sherpa micro (see adapter plate) -Bowden -BMG like (see adapter mount) -Titan (see adapter mount) Hotends with BMO/V6…
I adapted the Elegoo Centauri Carbon Printhead Fan cover (credit: magedark) to utilize the High-Efficiency fan grille STL developed by Noctua (credit: Noctua_at). I'm not sure about any actual efficiency gains from this fan, but according…
Modified the distance of the mounting holes for the hotend, measured my as 6,9mm, the original project is 6,5mm which is not perfect as it needs a tight fit. Added also a version for heatinserts M3.
Elegoo Centauri Carbon Printhead Fan Cover A bit loose but it can rotate when there is wind blowing from the layer fan <3
This is a remix of Ibot_3D's excellent Voron Stealthburner printhead for the Bambu hotend. Changes include adding support for Filametrix, moving the wire path out of the way of the filament cutter, and tightening the slot for the hotend's…
Designed for a CW2 extruder. Other extruders may not work (untested). Required Hardware: 2x M3x12 or/and 2x M2,5x8 2x M3x16 6x Heat Insert You can either secure the hotend with the holes usually meant to screw the fan on (M2,5) or you can…
Designed a magnetic frontcover for the printhead, that can be used with the original Printhead without further modification (adapter required) and a version with a new base plate. I keep the original style and dimensions as good as…
Designed by: ericthepoolboy Hardware Kit and Build Support by MakerRx Before overhead valves took over, there was the Flathead V8 - raw, simple, and legendary. This 3D printable scale model brings that piece of history to life with moving…
This Shakespeare globe theatre was initially made as an English assignment. I made it in Blender and also made some renders with it. Ironically, this was made nearly a year ago, but I finally got around to uploading it. :) Here's a small…
The idea was to make miniature spotlights that can be controlled via a standard lighting controller, like the one we use in the theatre I'm working at. You can open and close the barndoors, as well as move the whole spotlight around, just…
Credit to the hardworking guys in the Voron Community for the Stealthburner https://github.com/VoronDesign/Voron-Afterburner/releases/tag/sb-beta0 Design is license under GPLv3 as per Voron license…
This modification is intended to carry over as much as possible from the stock Anycubic printer (Vyper Rev. C, Kobra Plus and Kobra Max), but to get an direct drive extruder and better part cooling. My target was to be very compact with…
Features: M3 threaded Inserts (ADXL spacing 15mm) Improved the heatbreak duct curvature for better airflow. Improved heat-break fan fitment + fan alignment (new). Improved LED PCB clearance/fitment Reinforced mounting lugs Hex Key access…
While waiting vzbot official printhead, I design a printed printhead modified from eva to have the same feature as vzbot alu printhead. adjustable fan height, QD2 support, CPAP Fan only, support orbiter 2, vzhextrudort, lgxlite, sherpa…
Say hello to Pango, the adorable pangolin who’s ready to roll into your heart (and your print bed)! With a curled pose and detailed scales, Pango brings texture, charm, and wildlife flair — all in under 30 minutes! ✔ One monocolor 3MF…
A simple EBB36 CanBus Board Mount with Cable Strain Relief for VZBot Printhead CNC V2 It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5 mm It's…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to 3D Print and/or Laser cut an ESP32 WiFi connected Weather Forecasting Theatre with E-ink Display. Meet WeatherBot, my WiFi…
This is a slot together interactive BTS Black Swan Stage The curtains slide in and out, as do the figures. Print without supports and with 'print thin walls' checked Let me know if you would like another concert stage? If you are a fan of…
Phaetus Dragon HF Mount for Stealthburner Why not use the P-DRG Mount? I just finished my v2.4 build, and my set had the HF variant of the Phaetus Dragon included. The obvious goto was to print and use the standard P-DRG mount since it's…
no supports needed, print it standing up or orizontal, you will need an M3 drill bit to drill 4 M3 16mm screws to fix the fan with the protection grille if you don't use the 14mmm protection grille if you print the one with brass inserts…
Note:The nozzle of hotend installation of modification based on V6 is around 1.5mm step out than the modification based on RevoVoron
Designed a magnetic backcover for the printhead, that can be used with the original Printhead without further modification. I keep the original style and dimensions as good as possible. Only the hole for the usb-cable is bigger, cause i…
Update (15.06.23) - Now works with the Orbitor, you will need to print Orbitor Bottom Back Brace Orbitor Filament Sensor Orbitor Top Back Brace Orbitor EBB Mount Update - I have added an additional version of the base (withgantrybase),…
UPDATE: the old design is not balanced, when the boat is lopsided it swings to one side... A new version is uploaded A small wind vane for small sailboats, I needed one for my Pouch Faltboot. It can be quickly attached and detached so…
Remixed model to lay flat for wall mounting.
Stealthburner remix of different design.
Hello 3D printing community! The TZ-V2 hotend is a Bambulab hotend derivative that features a unique radiator allowing for both groovemount and Phaetus Dragon 4-bolt pattern mounting options. It's an affordable, high-flow hotend, and its…
4028 Mount for VzBot F3d Racing RatRig CNC'd aluminum Print Head. 2 version, M3 nuts or M3 Heatset Inserts BOM: 6 x M3 nuts or M3 Heatset Inserts 4 x M3x35mm Bolts 2 x M3x25mm Bolts 2 x M3x10mm Bolts 1 x M3x8mm Bolt + M3 Nut/Heat Insert…
Theatre Mask earrings Category: Fashion
adaptor for neptune 4 plus for enclosed filament build
This is a remix of Jmperou's original (https://www.thingiverse.com/thing:5380573) design the only thing I altered was the screw hole circumferences so that I do not have to use threaded inserts. All of the sizes were adjusted to accept…
11.3.2023: Backplate fixed, small collision was there. Design is prepared for: MGN09H linear rail Rapido HF hotend Vz-HextrudORT extruder 40mm front fan Axial 4028 rear fan Euclid probe STEP file included. Design is prepared for V-Core…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
*MODEL UPDATES* 1ST DEC 25 MODEL ADDED IN FOLDER FOR 6 X 3mm MAGNETS DIMENSIONS SLIGHTLY CHANGED TO ACCOMMODATE MAGNETS CABLE MANAGEMENT CAVITY INCREASED SLIGHTLY DETAIL ON LID REMOVED PRIOR EAR PIECE INDENT ADDED TO LID INCREASE INDENT…
BETA The printhead brackets supplied at Github allows for pressure fit around the neck. However there is a tiny bit of wiggle in this mount but the Aliexpress version also allows for removal of the neck to expose M2.5 bolt holes. These…
Hawaii, USA (HI) Southeastern Islands Coastline Topographic Map Hawaii, USA Southeastern Islands mountains and coastlines in a dual color topographic and hydrographic map! Part of the USA of Plastic topographic map collection. Unlike the…
A simple EBB36 CanBus Board Mount with Cable Strain Relief and PG7 mount for VZBot Printhead CNC It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5…
I have modified the Afterburner Voron 2.4r2 print head for the Bambu Hotend. I am providing the front and rear printhead bodies only. For the adapter, see Sam Schmidt's design for the Bambu hotend. In addition, Mr Telip improved the…
Installation: Detach the filament sensor from its original location. Fit the sensor into the mount by tilting the sensor so that it snaps into the top tab of the mount and press to fit the tube from the plate. Screw the plate onto the…
sherpa micro with: changed filament path to front stronger arm stronger rear housing
I recently switched to Voron Stealthburner toolhead from Voron Afterburner. After that switch, I started to experience clogs and I assumed the clogs were a result of insufficient cooling of the Dragon hotend. Despite using a fan that…
( edit 20.03.23): updated version V2 available: fixes the shallow (top left) heatbreak insert. improved notches to allow the heatbreak fan to be inserted easily. set the heatbreak posts to be parallel at 15mm depth (wasn't on original)…
May the 4th be with you! Happy Star Wars Day from MiniWorld3D! This year we did something a bit different, not a location from “in-universe”, but from ours! This MMU & multi-part model was created by Dany Sánchez , you can also print it…
I quickly made this model based off of Hevort's Tentacool. It's not super tested yet so let me know what problems there are. It did require me to further restrict the CPAP duct to allow for the Beacon connector, but seems to work OK so…
Found this hotend in Aliexpress and bought, but when arrived, how mount in my Stealthburner setup? None info found about this chinese Frankenstein… Learned some CAD and solved my problem.
Fan cover for printhead pla+ first layer height 0.2 layer height 0.2 first layer speed at 30mm/s first layer acceleration 300mm/s
This is my Version "ONE" of the Printheadcover for a 3-Fan-setup. (4010 Radial Fan) My Neptune 2 reddit . A easy clean design for the Fan from Dust. Cable space on the right side. BL Touch cable holder. A non hot glue attachment for the…
For VZBot printhead or cnc version you dot need do any changes, but for Sapphire Plus 3D printer you need make some chages. All top cover need turn 180 degree around, my was from factory all ready bend and im not using it. Motor holders…
Accidently mis-labeled by afterburner head, and had requests for a stealthburner. Untested as hotend is installed in my afterburner - but has ~1mm clearance requires the V6 collar to be fitted. Nozzle should sit ~3mm below airduct Voron…
Designed this prop opera glasses / theater binoculars for a friends birthday. There are holes so you can look through them. I printed them "looking" upwards. Supports are needed for the middle bit and under the arm. Enjoy! Category: Props
This was designed in conjunction with a duender build with the challenge of not using any other parts than the parts that came with 2 ender 3s bought on fb marketplace The printhead was made with the same overall height as an assembled…
Previuous version have some problem on belt position, if you already download the previous version, re download again. I already fix the belt positioning deviation. Report any issue to github/vzbot discord or here. MGN9 only. Refer to vz…
This is a modular 3D printable silhouette based on the TV show Mystery Science Theater 3000 (MST3K). Put it on the your TV, computer screen, or even a window! MST3K Silhouette.stl has the 3 characters and is just over six seats wide, and…
9/4/22 - Added RatRig dock and 4mm offset variant.
@9.4.2023 : Duct for Rapido UHF added Design is prepared for original VzBot CNC printhead and following hardware MGN09H linear rail Rapido HF/UHF hotend Vz-HextrudORT extruder 40mm front fan Axial 4028 rear fan Euclid probe STEP file…
Edit V2.1.1: Made little changes to the left mount to better fit the carriage screw. Removed some of the hex openings at the top because the fan housing sits directly underneath and so the openings are obsolete. I liked Marcin's good…
Changed the wiring path to a backside U slot
An artistic mask, perfect for home decoration, artistic performances, costumes, or simply experimenting with painting and finishes. In this file, you will find the mask with or without the attachment system. I also added a .3mf files to…
I am the original creator of the VZ-BOT printed printhead, Using VZ-BOT alu printhead mockup I came up with this design, until Vez see my design on discord, then he message me if he can adopt it as the official printed printhead. And now…
This is a mount for using a 40mm fan in combination with the CNC machines VZ-Bot ratrig printhead. It's specific for using the Vz-Hextrudort and Rapido hotend. It is a WIP as I am still building the printead. STEP file is included for…
Here are replacement drive gears for Athearn and also for Walters Life-Like Proto 2000 HO scale locomotives. There are 2 files for the gears: The "Original" file is the same exact total length as the Athearn gears, part # ATH60024. The…
This is a Anthead mount for “aliexpress bambulab hotend”, not tested yet. it need some “low profiles” M3 heat inserts, link included in the fusion360 file. Bambulab hotend model by @RobertSamples_345778…
Athearn Coupler Retainer Clip HO Train Cars. Replaces the metal clip holding couple in place.
“Beavis, I have seen the top of the mountain, and it is good.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my…
I really wanted to the use the extra Chaotic Lab CNC Tap V2 I had kicking around, but couldn't find a good way to adapt the AntHead to this carriage. I found the original model which somewhat worked, but there were areas that clashed with…
I cut down the anthead docks so that you could see more of the extruders.
Why this print head? Compact and efficient Fits on Ender 2 Pro and Neo series ( not for elder Ender 3 ) Support E3D v6 and Volcano hotends Slightly print volume losses: 165x160 for Ender 2 Pro Easy to print - no supports needed…
Hi. So i have an Ender3 V3 SE, it is my first 3D printer. I love it, but that print head cover, to me, is so boring compared to others, i had to do something about it. After some time of learning Tinkercad and printing prototypes i share…
Combined the Voron Dragonfly BMO Stealthburner printhead with files from the Filametrix project. Tested/working on my Voron 2.4R2.
Down Town block buildings. Downscaled from N scale. Prints easily with the supplied g-code files.
Improved cable routing with cable ties
a new Version of my T1H printhead design for the RatRig V-Core 3 using a MGN12 carriage and a billet main plate. Rapido, Beacon and Orbiter 2.0 on the comparison picture you can see a EVA printhead, T1H and the new T1H2 printhead short M3…
cpap duct for VZBot alu printhead with Quickdraw v2 by annex
DTF Epson I3200 Printhead Cleaning Station. Printed in two parts. You can modify upper part if you need for different type of printhead. On places that cover connectors I put cover cut of heat shrink tubing. It is tight fit.
This is a Theater of Magic Trunk. Theater of Magic is a Bally 1995 pinball game that is quite well regarded. The trunk is a main target and the original and replacements crack and break. Occasionally flexible replacements have been made…
Dream Theater (Majesty) Logo + Keychain FCStd, STL, Step
Stealthburner printhead for Phaetus DropEffect XG hotend
ABOUT & WHY: sure, this is just one of many printheads/fan shrouds/direct drive mods for Ender 3 printers but as I've used few of them and also wanted to upgrade my printer to direct drive, I found all the mods to be pretty big, heavy,…
I needed the stealthburner to fit volcano size nozzle and filametrix.
Kobra 3 Lightweight Printhead V2 For those who are chasing less weight or just want to see the internal mechanisms Difference from the first version Beam thickness increased Diagonals added
![Ratrig Vz Printed Printhead [Beta][Untested]](https://media.printables.com/media/prints/379041/images/3182847_9094d9c8-64b4-4e48-818b-1a31c0cb11ba/screenshot-2023-01-24-063953.png)
