Liczymy pasujące modele…
Often I found myself needing thumbscrews on my projects, and since M3-M8 are my most common used sizes i deceided to make myself some, and this is my Knurled version of my standard thumbscrews. The thumbscrews are designed for socket head…
*** Assembly Videos At bottom of this page*** Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non printed parts list is below along with easy step by step assembly videos. Help is available, usually…
Often I found myself needing thumbscrews on my projects, and since M3-M8 are my most common used sizes i deceided to make myself some: The thumbscrews are designed for socket head screws and use a nut in the compartment on the underside…
A simple thumb pick to play both rhythm and melody on the guitar at the same time. You will likely have to try a few different scales to find one, that fits your thumb securely, yet comfortably. Check the full article about 3D printed…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 New hands for DUMMY 13 Get your Dummy 13 here: /model/593185 Have fun!
This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…
These thumb tabs mount underneath the heated bed. Allows easier removal of the steel sheet in the same way that the MK3 works. Print instructions Must be printed from PETG due to high temps. Part is best printed vertically on one side, no…
A small and handy tool if you like manual massage, but finger strain is an issue. It features grooves for four fingers, as well as a small concave thumb rest, which allows the tool to fit comfortably in the hand (some variation expected…
Pinky finger/thumb brace (splint) Suitable for fractures of the fifth metacarpal bone, to stabilize injured ligaments of the metacarpophalangeal joints (between fingers and a palm). Depending on the length, it can be also used to fixate…
When I realized that commercial GoPro style thumb screws are often much bigger than needed, making the whole camera setup frequently more bulky then necessary, I started to create my own thumb screws of different length. Then last weekend…
************************************************************************************************** These transmissions are intended for use with “Thumper” and “Morrigan” 1:8 scale models. Thumper -…
This is my entry for the ring competition. It is a thumb ring to hold the page open. Version 1: The thumb hole has a diameter of 26mm, if you require bigger let me know and I'll add in some bigger or smaller versions. I printed with 10%…
This is a customizable camera mount screw, but you can customize it to any other thread if you like. I designed this in order to be able to use longer cam mount screws on Noctaro's cam stand with the TPU anti slide part. Most important…
Collection of Metric Knurled Thumb Screw Collection including : M3x6, 8, 10, 12, 16, 20 M4x6, 8, 10, 12, 16, 20 M5x8, 10, 12, 16, 20, 25 M6x10, 12, 16, 20, 25 M8x 12, 16, 20, 25, 30 For general purposes PETG, PLA works ok. For some…
Loved the Page holders around, but I wanted a honeycomb style one to match my honeycomb book stand!
1. Introduction The perfect toys to print if you want to play “thumb war” like a true Jedi or with the dark side of the force like a Sith Lord ! First, chose your handle and your destiny ! I design all handles based on the real ones you…
Optional parts for Thumper (Click on files to see visual 3D files) Narrow wheels fit trailers. Wide wheels technically fit. beware of oversizing. STL files have a Prefix letter. All parts for each set are marked with the same prefix…
Thumbstick Tops for Odin 2. Top is the same size as Joycon tops. All parts are meant to be friction fit, use glue at your own risk. 4 Thumbstick styles 1 Height Adjuster for use with stock top Printed on A1 Mini. The smaller the layer…
There is a addition to make it move like the one in the movie! https://www.printables.com/model/807628-dune-thumper-functional With the release of Dune Part 2, I challenged myself to model a 3D printable model of the Thumper as seen in…
Introducing custom 3D printed thumbsticks designed exclusively for the Legion Go handheld! Elevate your gaming experience with these meticulously crafted thumbsticks tailored to enhance comfort, control, and precision during gameplay.…
DESIGN INTENTS Replacing thumbsticks that are damaged on PS4 controllers Design for 3D printing (and not a blind replica of the original) Overhangs and bridges have been adjusted to work on any calibrated 3D printer Stick is a little bit…
A solution to eliminate the hide and seek game every time the MMU2S door is flipped. No disassembly or extra components required, reuse existing tension screws and springs, I printed the bases separately in a darker colour and I can…
Thumb screw caps are an easy way to turn a 3 mm, 4 mm, or 5 mm hex socket screw into a thumbscrew. They press fit onto the head of the screw and make the screw easy to remove by hand. They are great for adjustable or removable assemblies.…
The original by Bababbak is a lovely design and does what it needs too with allot of practical simplicity. But the authors own recommendation was to print a remix with a metal spring. I've always been a bit of a purest in finding ways to…
I needed to replace a missing thumb screw, and since my CAD design is parametric I thought I might as well make a range of sizes while I was at it, just in case of a future need. Sizes include : INCH Metric #6 M3 #8 M4 #10 M5 1/4" M6 If…
These are optional tops for Thumper 4x4 Rock Crawler. The original model is here https://www.printables.com/model/323433-thumper-18-scale-rc-car-cj7-rock-crawler-by-blackc/files…
They are basically the same as @Elothan's design. Only difference is the added cross bridge features so that they can be printed without support or punch through layer. The STLs are rotated in the printing direction. The bridging are…
A simple fully printable thumb piano (Kalimba ?) in 3 parts. I set 3 perimeters and: 1) PLA+ with 100% infill for the pads. 2) PLA with 100% infill for the shell. 3) PLA with 10% infill for the intermediate part. Just glue the parts…
I saw the thumb index from UTG and I thought I could make something similar and it looks like it could be useful. So I made this simple design. If you don't know what this does it's a piece to rest your thumb of the support hand for a…
!!!!!! It has come to my attention that not all 40T gears are the same. Some have a much bigger shoulder and are much thicker. I got mine on Amazon. link below. The wrong 40T has an option of a shaft up to 15mm, The cheaper version only…
Every time when I need some thumb screw, I'm missing some of its dimmensions in my collection. It is quite annoying. The easiest way to have a thumb screw is to make your own i.e. DIY by using ordinary hexagonal socket screws of type…
Almost out of filament? Print these with the last few fractions of a meter, and in a just a few minutes you can sing the blues. You can also load up a new spool set up a new print, and Rock ON while the new prints proceed! These couple of…
I was feed up to always had to use and find the right Allen key to be able to remove the toolhead cover. So I made this thumb screw to facilitate its removal. It's quick and easy now :) ❗ Disclaimer Most of the thumb screw versions are…
With this pocket-sized drum, you can release your inner Buddy Rich while keeping your fingers busy. It is surprisingly loud. Printing The ThumbDrum-skin-drum.STL file contains 2 separate parts: the drum skin and the drum body. If you want…
I recommend to print this standing on one surface at the Bottom like one of the pictures show. It might work best if the inner gap is facing upwards. I printed mine on an Ender 3 S1 with - Fillamentum Wizards Voodoo PLA - 210°C - 0,08mm…
SMA is one of the most common coaxial RF connectors and I happen to use them all the time. The wrench dimension is 5/16", which is almost 8mm. The spec usually calls for 4 to 8 in-lbs of torque for these connectors, which is about as…
Thumb brace for fixation of the 2nd thumb joint. I designed the brace when I dislocated my thumb while climbing. It works pretty well for me, but I have small hands. You can just change the scale to make it fit you properly. If you extend…
I've tested it on Fujifilm X100T and X100F, but it should work with X100, X100S, and X100V too. It has a snug fit so it won't need a screw to stay in place like the ones you can buy do.
I made thumbstick covers/grips/locks, whatever you call them. There is an STL for one that works without thumb grips. And an STL for one that works WITH thumb grips. (I've personally tested this with Skull&Co thumbgrips and it seems to…
This is a remix of the MMU2 thumbscrews for the MMU2 S . The longer thumbscrew should avoid accidentially pushing buttons on the MMU2S. If you already printed the short/original, you just have to replace the left thumbscrew, because there…
Knurled thumb knobs for ISO M4, M6 and M8 Hex nuts or bolts. Diam = 18mm, Thickness = 10mm. Printed with PLA, 0.4 nozzle, 0.2 layers and 40% infill. Also included : 3MF containing my preferred custom G-Code and all settings. Updated :…
This throttle wraps around the Rad Runner's rotating throttle and is secured in place with an M3 screw. There are ridges to help the band bite into the rubber throttle, but you can add rubber pads or a strip of neoprene or dip the band in…
This is a magazine loader/thumb saver/speed loader for the Ruger Mark 1,2,3,&4 (I,II,III,IV).
Thumbs up 👍 and also thumbs down 👎 it is up to you. Thanks to soozafone for their original design Lucky 13 Printable Jointed Figure
This is just a basic 10 mm tall, 15 mm diameter grippy thumbscrew knob designed for M3 nuts. Great for many projects. This knob was originally designed for 3D printers using M3 machine screws. I matched the hardware from this assortment…
Info: remixed my previous horns cap print - now with open thumb horns Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already scaled original to best fit, so just print this at 100% scale or…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Knurled Thumb Screws, ranging in sizes from M2.5 to M30, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm, 60 mm, 70 mm,…
I've never liked thumb picks because by the time I got one that fit securely enough, it would squash my cuticle into the nail bed below. This design has a contoured interior that distributes the pressure evenly across the nail and the…
Different sizes of thumbscrews, as replacements or for your new projects. Need a size not listed here? Just write me a message and I will add it. How to print: To get the best possible result that does not require reworking, the layer…
A remix of the original adding on a thumbgrip to make it easier to pull the bins out when it's time to recharge. Original Design by Tek: https://www.printables.com/model/1151505-creality-k2-plus-cfs-desiccant-box-optional-lid
This is a Z-axis guide with a thumbwheel that makes it easy to move the print head. This guide consists of two parts th
This is a recreation of Dani Clode's Third Thumb project. I've been working on this for approximately 2 years. Here's a BOM: PLA (or any other rigid filament) TPU (or any other flexible filament) PTFE tube (ID=1mm, OD=2mm) Fishing line…
2D artwork of Thumper from Bambi Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
************************************************************************************************* Dec 10-2023 Thumper axles have been updated for strength. The assembly videos for the old axles are still available in the description of…
replacement for the rubber top of joy-con thumbsticks. based on the shape of Xbox sticks. Must be printed in TPU or other flexible material. I could probably make a version that needed glued on or tight tolerances to allow other materials…
After some testing found that shrinking the original down to 83.8% was a good fit. Also reoriented the part for printing Glued it in with super glue If you'd like to support me please check out my filament wishlist here Print Settings…
Original image re-encoder .py script: https://github.com/alexqzd/Marlin/blob/Gcode-preview/Display%20firmware/gcode_thumb_to_jpg.py Other guide: https://github.com/mriscoc/Ender3V2S1/wiki/How-to-generate-a-gcode-preview Script that I take…
The One-Handed Thumb Book Holder is the perfect solution for avid readers who enjoy reading on the go, whether standing in line, traveling, or simply lounging around. This sleek and ergonomically designed accessory fits comfortably over…
I modeled some thumb-sticks for my Xbox one controller for Lift off; a FPV drone simulator. It has a 3mm screw hole in the mounts so if you want to make your own thumb-stick all you have to is make a thread 3-4mm deep thread to interface…
SCALE THE STL TO 98%, trust me This simple grip for your controller is simple and long-lasting, it takes a few minutes to make, it is a great ally if your thumbsticks are damaged or very old Print: Basic PLA 0.2mm resolution (lower for…
My first shared 3D model. I wanted some more accuracy playing Helldivers 2, so I tried several existing thumbsticks, that are available online, but didn't like them. So I ended up creating my own. Printed in standart PLA, top in different…
This is a remix of thumbsticks for PS4. My son needed them to play Fortnite, and they seem to work well for him. The top parts of the thumbsticks are remixed from PS4 Thumbstick Mods by philbarrenger . Top parts have to be printed with…
small thumb palette, for small hands. in 3mf model added a modificator piece for ironing. 4 lids print with 0.4mm nozzle, 0.30mm layer, infill 10%, flow 0.65mm, ironing in lids only. time to print in Kingroon KP3S only 51 min.
Manual bed leveling the Anet A6/A8 is a little awkward and could be made a lot easier. There are some good solutions on the net - I took the best, made modifications and kept it simple. This solution allows you to cover the entire hotbed…
After overbending my thumb (Doctor thinks it was dislocated for a second, and some ligaments are damaged), i had to somehow stop it from doing the same movement again. After printing in PLA, you can heat the splint in boiling water and…
Thumbstick replacement Probably will work with other XBOX pads too I recommend to: use 0.25mm nozzle (to better reproduce the texture) or print with resin Update: additional champfered version requested by @ntnt
This is a no-glue no-supports removable joystick to hold between your index fingers and thumbs.
Shout out to wolffshaut for the great models! I just had to give it my twist with a foot for vertical printing and a little less angle on the cups. I tried to print this aligned to the x axis first and it came loose twice so I went for 45…
Basically Remix from https://www.printables.com/model/432569-digital-caliper-case-mitutoyo/comments. Added more space for Thumbwheel and changed the text font. Tested on Mitutoyo 500-196-30.
The cap is proiected to be push to fit so you dont need to glue them on ,I suggest to print them with 0.005-0.1 layerheight to be smooth .
You can print this using whatever you want, I've obtained great results with PLA and TPU. No screw required, increase print to 102% if you use TPU to better and firmly fit into the blade. Buy me a coffee if you want to support me!
To get the best strength print with 100% infill.
Introduction This accessory will be used in one of my projects currently being developed for the PRUSA Mk4. What is this for? This serves to limit the tightening force on the nozzle when it's being changed. However, please so use it with…
Normally after you catch a fish, you hold it up by the lower lip while you remove the hook and pose for pictures of your big catch. When you're out fishing for predatory fish, like big ocean fish, you need to wear gloves or use a tool…
The picks that I found in the local music stores were unconfortable for me so I decided to plan my own ergonomic design. I optimized it for 3d printers -printing position is important for a good result. After you place it to the slicer do…
The Retroid Pocket 5 is an awesome retro handheld but I broke both thumb-sticks when traveling with the handheld in my sling. I tried printing the Odin 2/Retroid Pocket 5 Thumb Sticks but was not happy with the fit. I printed these…
This is a set of STL, STEP, and SolidWorks files for nut and bolt adapters. The purpose is to convert nuts and bolts so they can be hand tightened or hand loosened. I included sizes from M3 through M12. You can also resize these in your…
A thumper from Dune and Dune 2. Used to attract sandworms. “A thumper is a short stake with a spring-loaded clapper on one end. With the catch released, the thumper would pound repeatedly. It was used to summon a sandworm on the planet…
I tried many of the thumbgrips I found online, but I didn't like any of them so I made my own. I took the best of all designs I tried and combined it into one design to rule them all. You might need to sand it down a little for a smooth…
Action Army AAP01 Thumb Rest Hardware needed: 1 x M3 x 12 Flat Head Hex Screw To mount the Thumb Rest, the mounting pin of the trigger must be pushed in slightly from the right side of the firing direction, so that the pin on the left…
It is a cute ghost holding thumbs up. It is perfect for Halloween decoration and toys.
This is a replacement part for a thumb screw using a standard M6-1.00 x 30mm Hex Cap Screw. Print instructions Recommend using PETG. No supports, no raft, no skirt. It will be a very snug fit; just the way you want it.
Replacement head for a Thumbscrews. This part can be used with a DIN EN ISO 4017 hexagon head screw as a replacement for any screw that needs to be opened and closed by hand. In my case it is a spare part for a music stand. It works best…
I've had arthritis in my left thumb for a couple of years and have been wearing a brace off an on depending on the pain and many times I just wear it at night which seems to help. I did a 3d scan of my left hand and created this in Fusion…
These are replacement joysticks for xbox 360 controllers. The design is suited for 3D printers and not identical to the original. I have experimented with a few different designs trying to find the more grippy design that is easily…
Thumbscrew : ISO M6 Knurled screws - 10, 15 and 20 mm + my F3D file (should you need other dims). Simply printed with Prusament PETG, 0.4 nozzle, 0.2 layers and 20% infill with no issue. Also included : sample 3MF containing my improved…
Remixed the low poly hand to have a base and an inscription. I also included the base model, if you want to add something else on top. Print with low infill.
Support: The case_bottom needs support. Nothing else requires support. Carefully remove the support in the case bottom before assembly. Printing the Geneva gear at 0.12 layer height is recommended for smoother operation as z-seams…
I recently upgraded my camera from Sony A7M2 to Sony A7C. As much as I love small form factor cameras, the ergonomic of A7C is not ideal for my hands. I have seem people using thumb rest for Leica & Fuji cameras and I have always though…
I recently bought a used Nintendo Switch and realized, that the joy-con's thumbsticks weren't the best anymore. But 3d-printing to the rescure. I ripped off the original rubber from the thumbsticks, measured the plastic underneath and…
I recently watched Dune: Part Two and was captivated by the iconic Thumper. Inspired by its design, I decided to create a functional 3D-printed replica with a twist: my Thumper serves as a unique watering system ! Here's how it works:…
3D printed threads are unreliable, so I decided it's better to rely on an actual M5 screw and nut for the otherwise amazing camera mount designed by Sneaks. Some comments Thumb screw Since there are a few variations for the M5 socket head…
I didnt find any suitable thumbsteer for TQ controller (none on Printables) so I made one myself. It simulates the look of a beadlock wheel. Just replace original wheel, reuse the foam (it fits) and you are good to go. This wheel has less…
Book thumb holder in 2 different lengths to accommodate different book sizes. Print flat on bed, can be with 0.2 mm layers. Use more infill to make stronger. 10-20% acceptable.
printed using 0.4mm nozel with layer hight of 0.12mm
This is a Mount for the Runcam Thumb Pro, based off the rather nice looking model by JoyMonkey (available here: https://www.thingiverse.com/thing:5433478 ). I plan to make some various other mounts for this camera,so stay tuned, and don't…
I wanted to be able to open the file and saw on my Leatherman Arc with my thumb so printed a simple insert. It would probably be more comfortable to print out of TPU (scale up 1-2% if you do for a snug fit) but I printed it normal scale…
DJI RC Motion 3 Thumbstick / Joystick replacement because DJI seem to refuse to replace such a simple part. Installation: A simple press fit with a small dab of superglue just before you press the thumbstick in, just as the factory…
My MMU is in a pretty tight location and I can't easily get an allen key in there to adjust the idler tension. Here is a design for some thumbscrews that can be pushed onto 40mm M3 screws to adjust the tension without an allen key. They…
