Liczymy pasujące modele…
This is a standard 330ml can crusher design that I published on Thingiverse a while back. It is inspired by a design featured on 3DPrintingNerd's youtube channel. For this version I've thickened up the body from 5mm to 7mm and the 3mf and…
Wydruk około 6,16 €–7,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Full make of can crusher 2.0 6338K413_OIL-EMBEDDED FLANGED SLEEVE BEARING_6338K413 90034A029_LOW-STRENGTH ZINC-PLATED STEEL THREADED ROD 2_90034A029 92949A835_18-8 SS BUTTON HEAD HEX DRIVE SCREW_92949A835 And regular house screws to mount…
Wydruk około 31,53 €–38,54 € nettoWstępna wycena jednego wariantu
Application This is a high performance 6x3 propeller for RC model airplanes. The 6 means it has a size of 6 inch in diameter (roughly) and the 3 means that is has 3 inch of average pitch. Thanks to the straight form, without the usual…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For use with the bases at https://www.printables.com/model/429098 use this to push pixels without blisters or agony. I don't have enough drill presses for a work party, but these will get the job done. Way cheaper and better than a socket…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Use this device to push in MSR mini groundhog stakes without hurting your hand. Then after removing the stakes from the ground unscrew the insert and use it to scrape the mud/dirt off of the stakes.
Wydruk około 2,01 €–2,46 € nettoWstępna wycena jednego wariantu
1.13g cover for inverted (pucher moded) tinywhoops main boards. (Designed for Betafpv meteor 65 but it should fit to most brushless tinywhoops) printed on I3 MK3s+
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Remix of @lukfilipsk stake pusher.
Wydruk około 0,62 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This was created in Fusion and can be tweaked to fit your seed tray of a different brand as long as it has holes in the bottom to push the seedlings out. You can make the base thicker if you want but I found that 1/16" was sufficient. I…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
I broke the steering crank on my Mad Crusher so I made a replacement. The model is very simple, but works well. It is bulkier than the original for strength, but maintains the original linkage angles. Mount with original bushing and…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This was created in Fusion and can be tweaked to fit your seed tray of a different brand as long as it has holes in the bottom to push the seedlings out. You can make the base thicker if you want but I found that 1/16" was sufficient. I…
Wydruk około 4,00 €–4,89 € nettoWstępna wycena jednego wariantu
A replacement plunger/pusher for the magimix 5200/4200 food processor Clean and easy print. fits perfectly. much cheeper than ordering the original one. Enjoy.
Wydruk około 3,77 €–4,61 € nettoWstępna wycena jednego wariantu
Hello There! This Pusher Propeller ( P-Prop ) Plane is a model designed with the goal of being close to 100% vase mode printing and is capable of being printed in both LW-PLA and PLA. (UPDATE 2/5/2023): A new wing design with support for…
Herb Grinder with room for a magnet. has been working for some time now without any problems! printed at Layer height 0,15 no supports needed there is room for a small magnet (5mmx2mm) (you will need some glue to hold it in place) In my…
Had my first clog on my Bambu X1 and realized it was not an easy task to clear it as is :) Jump into cad 10 min later my Prusa Mk3s saved the day! How to use it: Undo the hot end when cold, you don't want the fan running as it can touch…
This product is to crush pills to make pills easier to consume. With a simple twist, the pill is turned into a fine powder that can be mixed in soup/food. Print instructions no need for brim or raft printed in 0.2mm but you can increase…
Ultra minimalist toothpaste squeezer design that's plenty strong! Works great for other things like facewash, lotion, etc. Measure the width of your tube at the end to make sure you choose the right size (there are 4 to choose from…
Since the new Flush Snaps are a little flimsy, it can be difficult to push them into their Multiboard counter parts - especially if you chose the tighter versions. So I made this little tool to help with that. Print settings I print these…
This is a simple Totoro-themed toothpaste squeezer. The opening is 60.62mm wide. The model is 117mm wide, 70mm tall, and 4.5mm deep. Add a couple extra walls to print the design faster (and for added rigidity). This is based the opening…
I like the design of Bounet's clog pusher. I wanted to include a ptfe tube within to help guide the filament when doing a cold pull to clear out the clog. I designed 2 versions to have the 2 screws secured by either nuts or brass inserts.…
This is a Nozzle Brusher I designed for my Voron V0.1. Say goodbye to cleaning your nozzle manually. This device will automatically clean the nozzle upon starting a print, or at any point using a macro. A guide for installation on the…
A string of six Nerf X-shot crusher shell casings for nerf dart ammo belt. Fully integrated with original nerf belt. All six darts can be printed in place, just sacrificing a little cross sectional area that is more for aesthetics than it…
Can crusher for 355 ml (12 fl oz) aluminum cans. Also works for 221 ml (7.5 fl oz) cans. Made with a bottom that centers the can. Also, there are drain holes (so make sure your can is empty) to aid in cleaning and poking the can back out…
This is a simple solution to issues associated with trying to push small aluminium tent stakes into the ground - and getting your palms cut due to small surface area of the stake, or deforming them if using a hammer. This simple tool…
The changes to the original are as follows: Scaled the plunger to 99% on the X and Y axis This was recommended by the original uploader, I've just done it so you don't have to. Scaled both the plunger and the body to 110.37% on the Z axis…
The parts can replace the hinges of the Skullcandy Crusher wireless headset, which gets broken very easily. The parts are designed to be printed without any support on any FDM printers.
... this is the perfect digital to analog interface for mechanical engineers! Consists of a "button pusher arm" and a bracket to hold down the servo. I used two of these to automate my coffee maker: first servo pushes power button, a…
A simple twist pill crusher. This was made to crush pills for a dog that was fussy with taking tablets so hopefully it can help you too. I have not tested printing this in PLA although the M60 threads was made with added clearance. The…
When downloading, do not forget that you do not need to click Download All, because in this case you will get a 404 error, because the site is broken and no one is going to fix it. Download files one at a time by clicking Download each…
2 colour grinder with palm tree print. Print with min 40% infill or higher. No need to print with support. You ned to have 10mmx10mm magnet and 10mm washer for the screw (thin).
This is a sight pusher for Glock Slides. This device will hold the slide in place and allow pushing the sights off a Glock Upper Slide. You will need the following hardware: 4x 5/16 Nuts 1x 5/16 3.75-4" Bolt 1x 5/16 1.25-1.5" Bolt…
I tried to design an indestructible frame taking advantage of Prusa XL multi material print capabilities. My configuration: LIPO: 2S 450mah FC: Flywoo GOKU F405 HD 1-2S ELR AIO V2 Motors: HGLRC SPECTRE 1202.5 Motore Brushless 11000KV…
WC Pusher Plate (Drückerplatte), compatible to Geberit Sigma I accedentaly bought a Delta pusher and had to fit it to a Sigma backend. Instead of returning it and getting a fitting (and more expensive one) I made a Sigma-compatible pusher…
This is my attempt at the Miltech Crusher from Cyberpunk 2077. I referenced screenshots from CDPR and drawings/pics from Volpin Props. Those guys are awesome, check them out. Modeled in Fusion 360 There is a text file with the bill of…
A printed Pusher so your Stryfe or other compatible Blaster can shoot Half- and Full lenght Darts. Print this flat agianst the Bed. A 0.2 layer height should be suffiecent. 2-3 Walls/Perimeters and 10-20% Infill. I printed mine out of PC…
This is my new project: a pusher boat, or a Dutch "opduwer" from 1927. "Opduwers" come in various shapes and sizes. https://nl.wikipedia.org/wiki/Opduwer The pusher is on a scale of 1:10 and is approximately 60cm long. The design isn't…
This add-on improves the filament retraction of the spool in Creality CFS, by eliminating the friction between the factory bumpers and the spool, which can become problematic as spools get lighter with less filament on them. Also no more…
This design is a clip that fits over a rada mechanical shower timed valve and keeps the water flowing without having to keep pressing the button. The cap fits over the button, press, and turn to lock onto the water pipes. Simple,…
This is a Remix of the great "Paste Pusher Animals" by makeplace and my own "Toothless-cookie-cutter" It was kinda requested by marianok . Thanks for the inspiration ;) Use the "smaller" Version. It fits 4cm wide tubes Let me know if…
If you're interested in a prebuilt or custom blaster build, please check GryphonsAndMore on Etsy! This is sort of hard to explain. The Gryphon is a “nerf” style foam blaster by Flygonial. There is a remix called Shirdal P4 by Skwiggums.…
Used this model as a reference when making a case to hold my SwitchBot button pusher like this one: https://www.printables.com/model/681036-switchbot-button-pusher-case-for-liftmaster-811lm-
This 3D printable Button Pusher can be inserted into the base of the Maslow4 in the half-moon shaped gap. It will hold down the button on the router so that you can change the bit.
The model combines a functional mechanical design with a fun Frankenstein/Halloween appearance, making it suitable for makers, workshops, garages and Halloween projects. 🖨 Features 🧟 Frankenstein-inspired monster design 🥫 Designed for…
I have used Thingiverse Shuflie's design to crash several cans, but preferred to go for something more sturdy building upon his model. No artistic elements, just functional. Redesigned based on the original STLs in Fusion 360. Sharing…
the boilie crusher is intended to grind boilies
A tent stake pusher that was inspired by the Aluminium Tent Stake Pusher/Handle; I re-designed the piece to be compatible with both 90 degree V style tent stakes as well as the groundhog style Y stakes as I like the freedom to use both…
Meet the angriest molar in town! With clenched fists, a furious frown, and even a cavity battle scar, this tough little tooth is ready to fight plaque and cavities. Perfect as a funny desk buddy, dentist’s office decoration, or just a…
I got tired of the sore hands, so made a quick block to allow me to push ws2811 pixels into megatree strips. I added support under where you push in the pixel which made it a good bit easier to push. Uses ¼-20 countersunk screws to attach…
On Artstation there's a solid Jack Crusher phaser model by Nick T that I remixed to split up for printing in parts. Update August 23 2025 - The original model size seemed a little too big, so I scaled it down to 92%. The new size feels…
A replacement for the hinge of Skullcandy Crusher Wireless headphones. THIS IS NOT A MOVING HINGE!!! This is a rigid replacement that will be easier to print.
After printing out another sight pusher I decided I wanted to make a version that was smaller and quicker to print with a captured pusher. I also wanted to use more common hardware and I wanted it to accommodate supressor height sights up…
This is an updated version of the Sturdy can crusher based on feedback in comments and my own user experience. What is new: Made it taller to allow crushing of sleek cans Added chamfers to holes, bottom and top to avoid cutting edges Got…
While Silly's alternate pusher does clear nightingale magazines as advertised, its a little tight compared to the original. I spliced on the sealing version of Silly's pusher to the body of the original design to let magazines drop…
Giant Crusher from Elden Ring
Mobula6 / Meteor65 compatible frame. Print in PLA, PETG might work but found mine to flex too much. Print slow, will make it stronger. After printing break the supports under the ducts and FC mounts. You might need to re-drill holes on…
I beefed up the frame by using 5 perimeter walls and adding a second spot to hold the slide on both sides. The pusher was redesigned to fit suppressor height sights. I added a hole in the wrench so it stays captured to the tool and a…
Funnel to fill your DI canisters with a packing/ pusher to help get the Resin packed tight
This is a remix of https://www.thingiverse.com/thing:4654240 but with 3d-printed handle. Other parts are same as original This device helps to crush grapes in the production of home-made wine. Supplementary material: stainless steel bolt…
Easy print tool to add to your sewing toolbox. Print with 3 perimeters for strength. The point can have an issue with warpage, so best to add a brim. Thanks @Tiffi226! I hope you like ❤ my model and will post your makes! Happy printing!
I liked the formfactor of the original, but wanted to make some changes to the design. So I remade it from scratch to change some angles, make softer edges, make the pestle solid etc. I use it to crush some shrimp food into smaller pieces…
Modified @Matt3D's excellent design with a longer, knurled exterior for better grip. Print suggestions: Note that this remix, like the original, prints very large . Maybe larger than you want. I've found that printing at 50% is plenty…
4 walls, 15% infill should work, the pusher does need supports, and you will need a small o-ring to go on the pusher head. the pusher goes in place of the standard breech, but the barrel assemblies have different assemblies as follows;…
Plastic Crusher - experimental pellet extruder designed for Original Prusa i3 MK3S 3D printer Author of the design: Silvestr Tkáč, Make3D Company Limited This prototype extruder is designed as a simple pellet extruder for the Original…
Tent stake pusher compatible with MSR Groundhogs and Easton stakes. MrCitizen did all the work on this, but I wanted a way to attach it to my tent stake bag, so I added a hole. Printed with a little support for the center hole. I used PLA…
Half-Dart pusher for the AF Spectrum. Currently requires trimming of the area that holds the kill switch when the jam door is opened to operate. (See picture with red circle) This is compatible only with the Half-Dart adapter from the…
Print your own chain for your x-shot crusher uses 1.75mm filament as a pin
Hey there, i like to modify or clean my Spyderco knifes but it is always annoying to remove the scales from the lanyard plug. So I designed this Lanyator to solve that problem. It works like a simple chain tool and ensures an efficient…
I wasn't happy that the icons had to be printed out separately and adjusted so that they don't interfere with each other. So I took the icons, scaled them down 75%, and embedded them 2mm deep into the button pushers. I had to make the…
Cap for cutters. You can print it fast strength. Please like if you download the model.
Hinge for Skullcandy Crusher Evo Headphones. Prints in two pieces to allow the user to not have to cut and resolder the headphone cable. Preforms just like the original except for it does not restrict the rotation of the earmuff since…
Running PEX pipe in tight spaces and during remodeling jobs can be a challenge, especially when faced with obstacles, restricted spaces, and pesky insulation. Introducing The PEX Pusher , the tool you didn't know you needed that makes…
Replacement Dart Pusher for the Dart Zone MK3 flywheel blaster. Designed to correct problems with Jamming, and Double-Feeding. in stock form on release**, the MK3 has problems with jamming when using Talon magazines as well as problems…
An ice scraper tool, with a strong ergonomic handle, and teeth for crushing the tough ice on one end and a traditional scraper blade on the other end. This is an easy print (smaller layer heights will create a smoother handle), and no…
This is my solution for blistered fingers after pushing a thousand pixels by hand and with pliers. There are a few similar solutions on thingiverse and I took inspiration from all of them and set out to design my own to optimize it for my…
I tried to use other available tools but encountered some problems, especially during the installation of the new sights (the frame was too flimsy, and the pusher didn't allow the installation of new sights). The tool has strong walls,…
The Table Top arcade style coin pusher, Perfect for fun at home for all members of the family! I made this as a gift for a family, All the major components are laser cut with only a few screws and a single switch and small DC motor…
Should be printed in default orientation. 4 perimeters, at least 5 top layers, 35% gyroid infill recommended as the pusher will see lots of force depending on the props clearance.
A hybrid pusher to fire both half-length darts and full lengths from the same blaster! All other designs i found or bought either were too unreliable or weren't compatible with the OFP anti-jam lid. Credit to Jackskidding for the pusher…
Here's my proxy for the Frosthaven monster, the Lurker Clawcrusher! This guy's on the big side, so you may want to scale him down to 80% or so so that he doesn't overhang the base so much, but I decided to make him bigger so that the…
Hello everyone! This is a 3D printed replacement dart pusher/breech for the Nerf Pro Torrent that allows for magazine swapping without needing to prime the blaster. While you can load and unload a magazine in a stock Torrent without…
UPDATED FILES Did you let a coworker try out your Longshot, and did he subsequently break the pusher while somehow full sending a double feed so bad it required a full disassembly of your blaster? Cause I did, and thats why I designed…
Molle/PLCE pusher tool for easy mount molle pouches/equipment on hard material like thick cordura etc. i like to print this model non planar ,but normal print works as well.
Modified pusher to clear flywheel cages with dart guides. Used in conjunction with Talon compatible cages by ahalekelly ( https://www.thingiverse.com/thing:2843287 ) Feeds perfectly using Worker Talon Adapters designed for flywheel…
If you have a Nerf Rival belt pusher motor die, it is likely a 260 series motor with no readily available replacements. I designed a housing to use a 130 sized motor as a replacement. It has increased venting around the motor to allow…
Prevents the laser cable and optional Air Assist hose from rubbing against the top of your enclosure if you use the xTool risers (or my designed honeycomb centers & risers). Or just to keep them out of the way… Perfect and tested fit on…
You should avoid pushing tent pegs into the ground with your foot as you might bend or even break them. This tool is made to save your palm! The tool has an inner chamfer that makes it self-centering around the tent peg, independent of…
You'll need M3x10 screws or something similar. I used some screws for plastic that are 3.1x10. Both pieces are printed in PETG and glued together. I used a 0.6mm nozzle and around 5-6 perimeters with a 50% infill.
Simple yet highly effective! This reinforcement prevents your X-Shot Longshot Pusher from breaking. Did your pusher already snap? Print, push, glue, and you're back in action. If it's still intact, print and install this reinforcement for…
This is a simple Remix of the Original-Parts, to not Print Parts in Mid-Air and even make the part with only 45Degree Edges All Other Parts can be used from the Original Part-List-Needed for 1 CFS: 32x 693ZZ Bearings ( 8 for each Pusher )…
I dropped the food Pusher one time on a tile floor and it cracked. I couldn't find a design so I made this in Fusion 360. I printed mine with 5 walls with a 0.6mm nozzle which was almost 100% solid. Printed without supports.
The scraper is equipped with a blade that clears frost on one end and a separate ice chipper on the other end that improves ice removal capability. 4 Walls 40% Infill
I made this for my Skull Candy Headphones. I printed the logo in white PLA and glued them with superglue. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: Yes Infill: 15 Filament: . PLA Category: Audio
I made a tool to aid in pushing out the inserts of a honeycomb wall system by RostaP . One end has a pilot for hollow inserts. The center is a ¼" hex for using a screwdriver bit handle with a long bit to add comfort to push. I didn't have…
Had some problems with the pusher catching on the back of the darts in the mag and damaging them, so I did this. Works really well from what I see. The instalisation instructions are shown on the photos. be careful not to remove too much…
This is 3-part model of pusher design for Prusa MK4S to clip on the bracket from Fan. With proper g-code you can eject your prints from front part of the bed after cooling down. This is the simplest solution for automatic printing with…
3d printable stryfe full auto kit just need a cheap geared motor enjoy. Category: Hobby
This is made with the Silver Reed LK150 in mind. The gauge is set to 6.5mm. Feel free to print them all or just the specific ones you need!
Table Saw Pusher 🪚 A simple and practical 3D printable push stick for table saws , designed to help guide material through the saw while keeping your hands farther away from the cutting area. The wide handle provides a comfortable and…
This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…
I wanted to convert my stryfe to half darts, but couldn't find a pusher that I liked, so I made my own! Some notes: Not compatible with unmodified daybreak cages, since their dart guide interferes with extended pushers. You can fix that…
