Liczymy pasujące modele…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
These are simple variations on the Sony NP-FW50 battery holder by RodLaird to hold different numbers of batteries. I was impressed with the simple but very secure design but had no need for 4 batteries. Anything from 1 to 6 is now covered…
Holds 4 Sony Batteries, simple push-in / push-out. I tried to make this super fast release, since we all know these batteries don't last long. UPDATE: Added a 6 battery version. NOTE: Works with Sony A7,A7II and other Sony products that…
remove the RAM mount ball by unscrewing the centre screw close the hole by screwing the screw back in or replacing it with a suitable M4 screw remove the 4 screws at the corners of the metal plate press 4 pieces of M3 nuts into the…
[Only Planing Adapter] This dust collecter adapter works beautifully for the planing function of my dewalt DW1150 jointer/planer combo. It should also work for the very similar DW50. If its not tight enough on your shroud, you can drill…
So I was looking for a case for an AZ-Delivery CP2102 USB to TTL Converter (https://www.amazon.de/gp/product/B07N2YLH26/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1) and found this model on Thingiverse:…
This is a general purpose low profile wall mount case for the Guition JC3248W535 3.5" display. The front part supports the display using the screws supplied, and clips onto the wall mount bracket. I specifically made this to mount the…
Viaduct rail compatible with BRIO and IKEA wooden rails. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini Straight Track - C2…
a Remix of a Remix ;)
--- Import from Thingiverse / Reupload This was my very first design some years ago and what started my 3d-printing journey. We don't have this planer anymore but this model may still be of use to someone. I also added my original…
Battery holder for sony batteries, available in multiple sizes Features: - Allow easy printing, less visible layer lines - Multiple sizes to choose from NOTE: Layer adhesion must be spot-on, or the latch strength will be greatly…
For Sony Alpha 7M2 Battery - NP-FW50 and two SD-Card Slots
Gridfinity compatible: 1x3 grid size (and 50mm tall - non stackable) Includes sockets for the standard gridfinity 6x2mm magnets (I found magnets unnecessary due to the weight of the batteries since I only take out one at a time. I left…
Hey there, made fitting mounting plates for the carpuride W502 screen - these mounts are compatible with this handlebar mount for quadlock:…
Prints fine upside down without any supports Tested in PLA but probably longer lasting in PETG because it snaps in This attaches to the pegboard using cleats so it can securely attach to the pegboard. Why? Well when I would remove some of…
Print time ~20 Minutes Filament ~20 Grams F3D File included, if you want to customise it a bit more The fit is not overly snug, the batteries are loose but don't shake too much. Print Settings (Ankermake M5C) Nozzle 0.6mm Filament PLA+…
3d Druck Modell für die klassischen W50 Modelle
Simple box with sliding lid. No supports. Model name optional, but can be printed with a different colour.
I didnt found a holder for the Batterys and they rolling arround in the bag. So i made them
This is my second iteration of a replacement wristband for the above mentioned Casio watches and probably others. In this configuration its not suited for large wrists. The wrist on the Photo has about 20cm circumference and uses the…
Printed upside down with supports with an Ender 3 on super quality settings. Replacement key for low profile ctrl. Category: 3D Printing
A few years ago I made a small, poorly made box for a Tang Band W5-1138SMF 5 1/4" subwoofer plus two 6 1/2" radiators. It worked and sounded alright but now that I have developed better CAD skills and understand the modifications I wanted…
FeelWorld FW568 5.5 inch Field Monitor Shade No screws, sticky stuff, etc, except for double-sided tape (or general-purpose glue) to stick some black felt to the inside of the shade to kill reflections. Alternatively paint the inside of…
a holder for the wiwacam mw5 camera.
I have fixed it, they have changed it like 3 times since i designed this, why they do this to me? I use this kind of glass cleaners. I did not like the box sitting on my table. It was ugly. So i designed a holder for it. RED one is PETG.…
I made this to help contain an ESP32 with a W5500 so that they can be kept in a tidy package. I just used a rubber band to hold it together, this was my first project in CAD so I wasn't sure how to secure them together yet.
A simple storage rack for holding 6 NP-FW50 battery packs for Sony APS-C mirrorless cameras. Hold batteries snugly, making it a good option for tossing into your camera bag without worrying about having batteries get lost or difficult to…
Dieser Adapter macht es möglich standard DN50 Rohre mit Dachrinnen der Nennweite NW53 (z.B. von Marley) zu verbinden. ------------------------------------------------------------------------------------------------------------ This…
This design is used to collect rainwater from a gutter. The input side is compatible to the NW35 gutter pipe size. At the output (overflow) you can connect the DN50 pipe. The rainwater will be forwarded through a ¾" hose compatible…
Hey team, I've been working on this model for a little while and it's at the point now I'm able to wear it for testing, so I thought I would share. In the future I may upload another version pending my results :-). The band was designed…
I purchased a cheap carburetor kit with cables from Amazon, for my Yamaha PW50. The cable was to short, and the rubber grommet was way to small, and would not snug fit into throttle hole. So I modeled up an adapter in Fusion 360, and made…
This is a casing for replacing a W5W bulb on a motorcycle Check the project out: https://cad.onshape.com/documents/92e5c3f798f8a6130066ce51/w/ae7076d22dcda7223fb65552/e/e8d850c0570b8a4c87a23cd0?renderMode=0&uiState=66744d19abe31d625ad50dec
Nozzle: 0.4mm Layer height: 0.2mm Material: PETG Supports only needed for 2.5 drives. Screws: 4pcs 6-32x6mm countresunk screw for 3.5" drives. 4pcs M3*5mm countersunk screws for 2.5" drives. You can print in place. After the successful…
Printed using eSun PLA+ black and Generic PLA Orange
ENG Holder Adapter for G-Shock GW-M5610U-1, should be compatible with GW-5000U-1 and other GW-5xxxx models from G-Shock with similar rigid bracelet and shape. Original Model by @PRINTSY…
This is the 3D enclosure for the XIAO W5500 Ethernet Adapter. It is a compact PoE development board featuring the XIAO ESP32S3 Plus, with an integrated, isolated PoE module and TPS563201-based power conversion that delivers a clean 5V…
CARPURIDE W502 SET AVALIABLE AT https://cults3d.com/es/modelo-3d/artilugios/carpuride-w502-set It includes back flat plate for quadlock :)
Replace your old NP-F100 & 200 batteries with a Sony A6xxx battery. You will need : -x4 blade terminals 6mm (2 regular and 2 half-cut →3mm)) -x2 Electric wire -x5 10mm M3 screws Printable without support (be careful to orient the parts…
just a socket for a w5w bulb for hardware works in your car... DESCRIPTION: no soldering - all you need is a printed part, w5w light bulb and two 0.5mm2 wires (optionally multimeter pins for the other ends - you can use even nails or pice…
This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…
This is an enclosure I've built for my electric boat. It houses the electronics to read out the state of charge, cell voltage and temperature of my battery packs. A STM32 uses ethernet to interface with a battery management system via…
This is a mount for the Carpuride W502. I used it to mount it vertically to the dash of my golf cart. I have included the step and fusion file in case anyone wants to modify it.
Tank mit stutzen einfach zu drucken ohne support 1:10
This table clamp allows you to mount the Makita PW5100C to a table for polishing rocks. It keeps the PW5001C in its intended downward position, while allowing you full access to the polishing pad. Having it in the downward position also…
Fits my SW 5906, printed in PC carbon fiber blend, has survived 20+ rounds of target ammo and 10 of +P. 1st one was printed on a Prusa Mini+ and I was surprised how well it printed the carbon fiber. Needs just a cleanup with a fine file…
Fits a bit snug. Use a bit of grease on the knob shaft (….uh).
Vesta Sentinel quick draw mount PDW50 Kiss, no need for high tech solutions :) Allows for wall, under desk and various other places to fit the Vesta Sentinel and have quick acces to it. Not "snug fit" for this reason, print as-is and your…
I sold the DVD drive in my laptop to fund my electronics modding habit. Instead of having an unsightly gap, I modeled this part which allows me to store an HDMI adapter and a USB-C to barrel jack adapter. It clicks in without you having…
The original cover didn't fit on my W510, I don't know if there are multiple styles of the HDD door, but I modified this one with a few simple cuts so that it fits on mine. Category: Computer
A module for the Keyestudio W5500 board to be mounted in the 19" DAP 2U rack frame . To use the front plate you have to remove the power jack of the board. The front plate has three 3mm holes for LEDs. Use M3 screws to mount the board…
If you own one of these RC planes you'll soon find yourself with a broken motor mount and a paper weight. Have more flight time with these than the original ones and work flawlessly. Combined the drive arm with the mount to make the model…
Hi, here is another keyboard riser I designed for my work mates. It only fits on the Cherry DW5100 keyboard but perhaps some one can find inspiration on the simple hight adjustment concept. I can't say for sure but maybe sometime in the…
Resized, customized a bit for this little module (which lacks any mounting holes of any kind). Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: 0.3 Infill: 10% Notes: PLA Category: Electronics
I used extenders for my pins, but you may not have to. Printed in PLA+ 20% Infill No supports
May fit other TVs with a distance between bolt holes of 36mm.
In addition to the DFrobot board, expansions can be installed in this housing. The board dimensions for the first and second mounting levels are also available for download. More information and electronics design at: http://www.averon.pl
Since this dipstick is easily breakable(and mine broke) I modeled it! Modeled using SolidWorks. Used photoshop for known dimensions and calculating rest. Found some of the dimensions in a Russian forum:…
This is a compact bracket to hold a WIWACAM W5 so it can be mounted outside of a bird box or for a cage. The camera can be found here on Amazon.…
A Gridfinity 1x1 NP-FW50 Battery Holder. For those who just need two.
Storagetray to mount Powerextra Charger and two NP FW50 on a Ikea Skadis Pegboard
All printable without support at 0.1mm layer
A box with a lid for Ардуино UNO + UNO Proto Shield +Ethernet shield W5100
English End cap for pneumatic quick disconnect plug NW5. Can be used to protect and seal matching quick connects on water cooled welding torches. Printed with SainSmart TPU flexible filament on a stock Creality CR-10S. Deutsch Endkappe…
Modular storage for Sony NP-FW50 batteries (used in Sony Alpha cameras) Category: Containers
Print time ~25 Minutes Filament ~30 Grams F3D File included, if you want to customise it a bit more Print Settings (Ankermake M5C) Nozzle 0.6mm Filament PLA+ Layer Height 0.40mm Layer Width 0.62mm Perimeters 2 Top / Bottom Solid Layers 2…
Made a Gridfinity bin to hold K2_Kevin's battery holder and used Kelly Egan's bin as a reference to add a few SD card slots. Hope it's useful to someone!
The Queen Bee Pro from Bulkman3d comes with mechanical endstop limit switches. While ok, they're not fantastic, and I wanted something a bit longer-lasting. I designed these two (three if you count the mirrored Y axis as an extra version)…
Stray light deflector for the BenQ W5700 rojector
Flipper Zero Ethernet / LAN Module Enclosure (W5500) A lightweight, compact, and protective 3D-printed enclosure custom-designed for the Flipper Zero Ethernet module (W5500 Lite breakout board). This case protects your exposed wiring and…
This is an adapter to mount a Raspberry Pi 3B+ (or any RPI with the same mounting pattern) in a BCN D25, W27, or W50 printer (It might also work on an R19 Sigma or Sigmax, but I haven't checked yet). The mount and Pi replace the original…
AkkuAdapter-26650-36650 kezu kh-w503
Plastová pohybová matice z pohonu křídlové brány Moovo XW432 , XW532, NiceHome ARIA200/ARIA400. Materiál: PETG Tryska: 0.4mm Výplň (infill): 100% Tištěno tryskou 0.4 mm, výškou vrstvy 0.16 mm, infill 100% na Bambulab A1, PETG se skelným…
This is a cover or mount for the optic Sensor Omron TL-W5MB1. Is used in some heavy idraulic press and the cutting oil used on that machine literally worn the plastic component of the sensors destroying or making brittle the plastic where…
NEFF W5320X0EU /18 FD 8606 700157 opening handle. PLA works fine. Print with supports in the front section. Öffnungshebel Waschmaschine NEFF.
This is a servo frame to mount the FrSky Xact W5651H upright instead of on the side. The servo cutout is 8.0mm x 23.5mm. It adds 2mm of mounting height. The servo is being fixed by screws in the mouting adapter. The mounting lashes of…
A dedicated desktop charging stand for the Blackview W50 Pro , featuring a curved C-shaped support and a tilted watch platform. Features 20° tilted platform for easy viewing and access. Recess for the watch’s rear sensor and a holder…
Print out of whatever material you have on hand.
Factory stand broke during transport. Replacement phone holder for Sunny Rower RW-5910. Printed in PLA, supports needed under insertion tabs. Fits existing hardware. Printed in high infill (50%) for stability. Holder uses existing screen…
SUPPORTS ARE A NEED Velcro is attached/glued to the back of the holder and can be easily attached to your backpack.
Intended to replace a missing corner on the workstation's faceplate. I made a mistake during modeling - it should've been attached from the inside to the outside, not the other way around... Because of that, dorung the front attachment it…
Intended to replace a missing corner on the workstation's faceplate. I don't exactly remember how it went, but AFAIK it should fit with little to no problem. Polishing inward-facing wall should help otherwise. Fujitsu have models in the…
IIRC it should be for this workstation specifically. For the most part it works, but you probably should trim some pins getting in the way from the print. Hot glue gun, or melting down the plastic pins, is the way to attach it to the…
Taller lid for additional electronics A 50 mm tall replacement lid for the Seeed Studio XIAO W5500 Ethernet Adapter enclosure. Created to provide extra room for modules such as a CC1101 radio receiver, a DFPlayer Mini audio player and…
These are 99.9% accurate row-5 MT3 spacebars. I'm the designer of the MT3 keycap profile, so you could say these are official :) You can read more about this on my blog: https://matt3o.com/mt3-row-5-spacebar-stls-all-of-them/
These are the official 44 Delta Lishi Spacer V2 models for printing at home. They add 4 mm of spacing to compatible SC4/KW5 Lishi tools for use with a matching five-pin lock of the same keyway. If you would rather buy them, the finished…
just a socket for a w5w bulb for hardware works in your car... DESCRIPTION: no soldering - all you need is a printed part, w5w light bulb and two 0.5mm2 wires (optionally multimeter pins for the other ends - you can use even nails or pice…
A Gridfinity 1x1 NP-FW50 Battery Holder. For those who just need two.
Factory stand broke during transport. Replacement phone holder for Sunny Rower RW-5910. Printed in PLA, supports needed under insertion tabs. Fits existing hardware. Printed in high infill (50%) for stability. Holder uses existing screen…
Vesta Sentinel quick draw mount PDW50 Kiss, no need for high tech solutions :) Allows for wall, under desk and various other places to fit the Vesta Sentinel and have quick acces to it. Not "snug fit" for this reason, print as-is and your…
This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…
Precision-engineered, durable handheld enclosure specifically designed for the Guition JC8048W550 display. The design focuses on mechanical rigidity, a professional industrial look, and easy assembly. Technical Specifications External…
This design is used to collect rainwater from a gutter. The input side is compatible to the NW35 gutter pipe size. At the output (overflow) you can connect the DN50 pipe. The rainwater will be forwarded through a ¾" hose compatible…
This is a custom printer profile to use the Epsilon w50 printer with Orca slicer. Profile is tested with pla. You can modify it and use with other material. Print quality encrease a lot respect the original ones. The printer is idex, with…
This is an ashtry design that was commissioned by Loraine to hold large cigars, thin cigarettes, and desk waste. Included below are detailed dimensions for calculated adjustment, recommend decreasing 20% for smaller scale. Overall Size:…
A Battery Case for Sony NP-FW50 or compatible. The Case has a status window to see if the battery is charged or not (see pictures). Print Settings Printer Brand: FlashForge Printer: FlashForge Creator Pro Rafts: No Supports: No…
Liked the idea @Better3DModels had of two separate sections to save some filament. Used the idea to make a holder for a Sharp EL-W516XG. The sides are symmetrical so just print the model twice.
Its a model wiznet W5500-EVB-Pico
![[IMPROVED] Dust Collection Adapter Dewalt DW1150/DW50 Jointer/Planer 100mm Hose](https://media.printables.com/media/prints/394666/images/8521118_ec898caa-ff5d-45a7-b0fa-bed8701fe997_8f4809f5-ea6e-4bfd-af04-7ca93fe0efdc/img_4853.jpeg)
![[Gridfinity 2x1] Battery Tray for 3x Sony NP-FW50](https://media.printables.com/media/prints/745698/images/5823742_6267e7ce-c56c-4880-b22c-4b5178ea7648_20a71c78-0a8b-4610-98b7-f311d00e06c5/img_6570.jpeg)
![[Remix] Modular Watch Stand : Holder Medium Adapter for GW-M5610U-1 / G-Shock GW5xxxx](https://media.printables.com/media/prints/540338/images/4351600_41e9d409-f21a-4e93-8e71-dd39016b6e93/dsc_0482.jpg)
![[Gridfinity 2x1] Bin for ON-FW50 Charger & Lens Cleaning Pen](https://media.printables.com/media/prints/745864/images/5825007_84688fea-a0a4-49d3-99fc-b0eb670093d9_7d9e8cf0-efa5-4276-9a32-2a69e2c843fe/img_6579.jpeg)
