Liczymy pasujące modele…
A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…
The original Bambu Lab swatch is OK but it had a few things that needed to be fixed. label: I've added a a slot for a standard 12x22 label with 2 mm corner radius - like those for Niimbot or Brother Label printers. If you don't have one,…
See Zip file for all files including STL & STEP. ---Citations: Inspired by the Recovery Tactical MG9 Angled Mag Pouch. ---Description: Holds a mag, at an angle. Designed for the Taurus TX22. Mag release is ambidextrous. ---Variants: A:…
This is a custom rim designed to fit the popoular LEGO 43.2x22 tyre size. I was kinda unhappy with the stock rims because they don't really look realistic, which is why I decided to print my own. I got the outer part of the rim from…
Liked the shelf by Pizzaman76 but wanted it a bit bigger so I made it 220x220mm
This is a remix of the weighted backplate design from aaextra44 on Thingiverse. I printed this in PA6-CF on my X1C and noticed the trigger would not function when the part was installed on the TX22. Through trial and error, I was able to…
This is a magazine loader/speedloader/thumb saver for my Taurus tx22. It fits all models of the taurus TX22's (standard, competition and compact). No support needed. I added a hole in the wing for a key ring after I printed it so it's not…
This is for adding 8 to your TX22. You will need to get a longer spring and a screw for holding the base in place. infill 15% gyroid .16 layer. https://www.blackdogmachinellc.net/5pk-9heavyspring.aspx
This is a slip-on spacer for use with full size 16 round magazines in a TX22 Compact. Nothing holds it in place other than friction, easy to remove if you're sharing mags between different TX22's. The photo of three mags shows (L-> R) the…
It is a hideout for hamster or other small pet. Quick project that can fit to the standard 225x225 printer
Print at a layer height of 0.2 mm If you want to make it bigger or smaller change the X and Y scale, leave Z at 100%
Wanting to use Taurus TX22 full size 16 round mags in your TX22 Compact? They fit, but leave a gap between the top of the floor plate and the bottom of the magazine well. Does that bother you? Me too, so I wasted a lot of time coming up…
Had this for a bit and decided to post it even though I have not printed it yet, which I really hate to do as I think everyone should print their own project first just to make sure nobody else wastes material and time but I just don't…
I tend to give a home to abandoned thinkpads with missing parts. I remixed my X200 HDD cover to fit a X230 I recently got. Printed without supports, 0.1mm layer. Fits like the original after a little bit of cleanup. Print Settings Printer…
This 3D Model is always helping me out even if i use a Bed Level Sensor to get the perfect first Layer. You can Stop the print after the First Layer its just heigher for better view. Filament: PLA, PETG, ABS, ASA Layerheight: 0.2mm
I made this to enclose the lower portion of the 34-round magazines made by ProMag. They always looked a but funky to me so i made the lower portion look more like the grip of the gun itself.
This mount allows you to mount your 22x22x8mm GPS on the front of the Mario5 Frame. It is designed to fit the GEPRC M10 Series but works with other GPSs aswell. Just look out for the dimensions.
Made after losing one. Hope this helps.
A decorated designed tiles to mount on the wall. Can be mounted in 2x2, 3x3 or 4x4 array. Each tile is 22cm by 22cm (8.6in) Print is optimized for minimal filament consumption while keeping solid structure Inspired by the design of…
A simple one-piece 608 bearing (8mm x 22mm x 7mm) without balls suitable for replacing a real bearing for testing or static modifications. Designed with tight tolerances, rounded corners, and printed in PLA in minutes. Edit: Added a new…
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 16pt mesh is constructed of 16 20mmx20mmx0.2mm squares in a 4x4 grid with 2x200x0.2 lines connecting each grid element to provide whole…
This is a pin for the mag follower of a tx22, I used the Pin from the 16 round mag to get the measurements. Functions well, printed on a bambu labs printer with .08 resolution.
These are orientations I have made in order to fit this project easily onto a 220x220 built plate and save you the time
Found out my refurbished thinkpad x220 only came with one hard drive caddy arm. I wanted to also take advantage of the fact that you can easily swap the hard drives on the thinkpad x220 too.
It is a copy of a double-ended wrench organizer (6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22mm). I replaced the original organizer of the combination wrench set with this one for the set of double-ended wrenches. This other organizer…
Now with a nice tight fit on the mag. This works like the factory loader now, with a little larger exterior that might be easier to handle for you.
GPS Mount made for VOLADOR II. It may be compatible with other drones. Printed on TPU 95A 20% infill
Inspired by the Duplo Baseplate Puzzle I wanted to print the biggest single piece Duplo baseplate fitting the new PrusaXL. I came up with a 22 by 22 nubs baseplate. (352x352mm in 100%, 356x356 in 101% scale factor.) Scale Factor Duplo…
The original file didn't fit on my ender 3 V2 but I didn't want to print it in two parts. There are still lots of details where the baseplate fits in the L-boxx so it would still fit snug. I will add a make or add a photo when it has…
Ahoj, toto je moje diplomová práce z roku 2020. Rád bych se s vámi o ní podělil, jelikož se jedná o plně funkční model. Jedná se o kopii Eachine Wizard x220 s drobnými úpravami (zpěvnění ramen atp. kvůli tisku z plastu). Šroubky jsou…
Adjust the scale using print scale on your slicer, this model is 1:10.
Here is my video explaining the process of making such wall arts:
This custom-designed 3D printable mount allows you to securely attach a 22"x22" IKEA Skådis pegboard to the side of an IKEA Bror utility cart—without the need for any additional hardware. It is fully compatible with the standard fasteners…
2U sized mount for an ATX PSU in a 10-inch rack modified for a 220×220 mm build plate I would highly recommend printing in PETG rather than PLA, as PLA may deform from tension and heat. If you place this model in the centre of the build…
Due to the simplicity of the model no supports are needed. I printed with PETG with 0.2mm layer size on 0.4mm nozzle. The exact material and configuration you are using do not matter a lot though I guess.
To assembly it correctly, use some hammer, or just use hot air to get your bearing warmer.
PETG, 5% infill, 2 layers. Maybe 200x200 will be fine with small mods. If you want so, let me know in the comments, I'll create smaller versions then. It's a simple work, but boring and took me quite some time, so you don't have to waste…
Who doesnt love the Taurus TX22?!! I Printed my remix this night and it looks wonderfull and smooth!! Thanks again to @Racoon Dev for sharing the .Step file <3!!
Replacement badge for the Lenovo Thinkpad x220, its designed to be printed with multiple colors, but it can be printed in a single color as well. Size of the model : 26.5mm x 9.5mm Print settings: Layer height : 0.2mm Add color change on…
These are for helping align a smaller 220x220 build plate for a Anycubic Mega S. The default build plate is 240x220 (build area is 210x210 due to clips). I wanted to change the default glass for a PEI sheet, but it's very difficult to…
Use the latest version of Orca Slicer and load the project which, will already have the pieces on plates with the correct colors and settings. This is done in 2 prints and then the C3PO is carefully put into the background piece. It is…
Hey fellow makers! Please note: These are just the 608 bearings, the extra fidget spinner that I used to show the spinning potential will be available here >>> […
lego bricks 1x11 to 1x22
6/15/26 Finished version 1. Press fits tight and uses original rear sight screw to fasten it. Requires 2 M4 heat set threaded inserts. I used Yaocom inserts from amazon, but any of them should work as long as they aren't too long. Print…
I appreciate the osVAC system. Created a male adapter to fit my Bosch PKS 18 LI2 hand circular saw, simply by parameterizing igamis scad template. Outer diameter is a cone with 34.5mm/35.5mm diameter and 22.5mm length. Fits nicely. Used…
This is the same model, but shortened by 15 mm to fit in size for 220x220 tables (like Sapphire Pro).
Print in PETG Props need to be trimmed a litte bit
I had a problem on my ender 3 s1 pro on prusa slicer thaqt i could not use my full bed size due to the purge line in the gcode and printer profile in prusaslicer . That is kinda fooling the slicer so if ANYONE has a better way of doing it…
The first version I uploaded was 207mm wide. On my Ender3 v2 it would not slice. I changed the print bed size, it did slice then, but one side was not able to put the brim down correctly. I squeezed everything tighter and was able to get…
Bracket for Lenovo X220 X230 2.5" HDD / SSD. You need two pcs of this to insert drive into laptop. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: gembird PLA+ red…
Design considerations: use 300 mm saw blades, ergonomic, but small enough to be printed on 220x220 mm bed. To mount the blade you need two M4 screws (at least 25 mm long) and two M4 nuts. Recommended print settings: if your print bed is…
Hi, this is my original project for Eachine Wizzard X220 V2 (but it will also suit to many other 5" quad drones). It's size is designed for typical antennas and Beitian GPS BN-880Q with compass. Print it in slow motion with 100% infill…
The painting “Cat moon halloween” for my Light frame for hueforge / lithophane arts This work was created for "Halloween 2026: Make It Move 🎃" Among the movable elements there is a hinge for the foot, which acts as a stand for the frame…
LIGHT BOY S FULL ATX PSU SINGLE FULL PCIE Every piece as been remodeled from scratch for a 220mm x 220mm bed size. 0.3mm tolerances. (loosy goosy for the lazy people, like me :) ) Accommodates 2x 120mm slim 15mm height fans located on…
This is made for a friend with some finger dexterity issues, for his Taurus TX22 16 bullet magazine. It allows him to easily load his magazine with better control.
Stackable Drying Box 110x110x40mm 110x220x40mm Honeycomb Style Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this…
No need supports to outer part (because I added chamfer)
Kitchen cutlery organizer Box 22x22x10cm I use it for car slleping build three areas for organising cutlery and other kitchen tools Print settings 0,2mm layer 5 walls 15% infill no supports
Generic PLA. 0.20 speed. Supports under arches and overhang.
Print this and adjust your Z-Offset while its printing! Works for Bed leveling too!
S&W Shield-2 9mm & 45cal, and the Glock 43 mags work perfectly. Taurus TX22 has a wider base, it will not allow side-by-side storage. The single holder version works great with the Taurus. The prints are a better way to store firearm…
Taurus TX22 spring retainer. This retainer limits the standard mag to 10 rounds To comply with the Canadian limit. I took the measurements from the original retainer. You can find the files for the mags in many places including…
Elevate your filament sampling experience with these custom-designed Bambu Lab filament swatches , meticulously crafted to showcase infill patterns like never before. These swatches feature unique, see-through designs that make infill…
Needed a way to attach a sling to my Ruger 10/22 with the Magpul x22 Backpacker stock. I did not want to pay for Magpul hardware so I designed my own. Uses one m3 or m4 screw. I don't remember the length and can't take mine out at the…
HSW Display Shelf Designed to fit my remix of KYZ Design's display found here https://www.printables.com/model/1531541-hsw-large-display-stand-225x225-remix However, it uses standard HSW mounting dimensions so it's compatible other HSW…
Quick print vase mode stackable tray box for mechanical keyboard keycaps. Holds up to 120u of keycaps. Prints both tray and lid in vase mode.
EACHINE Wizard X220 Feet (16mm) Drone skid plate/feet, designed for my EACHINE Wizard X220. I used M3x10mm Titanium screws with these feet, they go through the feet, frame and motor protectors to screw into the motor. The motor screw…
Radial-Wellendichtring Ø 35 x 22 x 6 (Simmering) !!! NICHT FÜR VERBRENNUNGSMASCHINEN oder Schmierstoff haltige Getriebe geeignet!!! !!!Dies Teil soll einen handelsüblichen "Simmering" ersetzen. ACHTUNG NICHT in Verbrennungsmaschinen,…
Compact model with very thin 1.6mm walls. Prusa slicer project files included with all necessary settings - take a look at the support and seam configuration for base model before printing from stl. Print parameters: print in STRUCTURAL…
backplate for a Taurus tx22, print standing up with supports for best strength
Parts are not oriented, I'll let you play with that in your slicer The larger piece does fit flat on 220x220 (longest length is 215mm) check original post for more info, and/or want to print it as a single piece…
ALL FUTURE MODELS WILL BE SHARED HERE: https://cults3d.com/en/users/antirice/3d-models Taurus TX22 magazine holder for the Honeycomb Storage Wall. Holds 4 magazines. Print details (as pictured): Printer: FLSUN V400 Filament: Duramic white…
I wanted a single print chess/checker board that would fit on my Ender 3 printer. I designed this board to fit with-in the 220x220 bed size. To print the darker squares, use post processing of gcode and enter a pause. Finally switch the…
Print on side with angled portion of alignment posts facing towards the build plate Required Original Mounting Screw 2 - M3 Heat-Set Inserts/M3 Nuts 2 - M3x6 SHCS Recommended Settings .1mm Layer Height 4 Walls 99% Infill PLA+ Or Better…
Probably best printed in tpu or some sort of wear resistant filament
Relocates the antenna to a much more crash resistant location. Print in TPU, PETG or ABS
This organizer has two options one that is exactly 220 and one that is a 1mm smaller on 2 sides for printer that refuse to print the full size. Features: Top left scissor slot. Standard size sticky notes slot with a snug fit in the square…
Simple Test if your whole bed is in correct level. You dont need much material and its printed fast
A bracket to attach the baby phone on the Baby bed. In our case a Paidi bed (frame: 50 x 22mm) and a Philips Avent baby phone camera. The clip is designed with a print in position hinge.
Give your IKEA SKÅDIS wall system a modern, designer look with this fully custom distressed reinforced Voronoi panel , sized to perfectly match the original 220×220×5.1 mm SKÅDIS tile. Strengthened geometric lines + clean textured finish.…
The Same Great Display in a Smaller Package I love KYZ's display stand but found the walls were too big for my printer. There are other sizes available but I wanted to retain the ability to use the large accessories so I made some…
everything split down the center for no support printing, use cuts of filament in locating holes and glue together. need 50 of the chain halves Category: Costume
Not for X220s. If you are interested in a version for the X220s you can contact me. I attached the gps module with 3m double-sided adhesive tape. but you can also use a cable tie (2.5mm). Layer height 0.2 - 0.32 TPU 95A
This is 220x220x250 Giant Cube Challenge for all Creality Ender 3 printers. You can flex on anybody that you printed a giant cube! Would take about 3 to 5 days depending on printing speed.
Print in TPU or PETG for best protection
(Google translated) The arrow stand is 220x200x82mm, for 8x8 arrows (64). The holes get larger and larger, from 6.7mm, 7.7mm and 8.6mm. Fits my ID 4.2, 5.2, 6.2 carbon arrows from min.1000 to 500 spine. The distance between the holes is…
Use the latest version of Orca Slicer and load the project which, will already have the pieces on plates with the correct colors and settings in framed and unframed versions. Print at 100% infill with a layer height of 0.04mm with a base…
A camera mount designed for Eachine x220 v2 fpv drone
Replacement for old / broken ladder feet for metal profiles up to 51x22mm. Best print standing on closed side. Minimal support can be used for better results.
mini LED single spot suitable for LED 5 mm reflector
Sling mount for the Magpul X22 backpacker chassis. Use an m5 screw of your choice to secure mount to hole. Print on it's side with supports and a .4 nozzle or smaller.
The original part breaks easily on this monitor, this is a replacement part In order to replace the part you need to remove the monitor plastic cover (you need to start from the frontal frame, it's easy), look for a video on youtube,…
The perfect level test for most ender 3 series and other 220x220 build volume printers Intended for 0.2mm layer height (if using a purge line you should have to shrink its width)
mini LED twin spot suitable for LED 5 mm Reflektor
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
Designed for a BN-220 GPS.Need new Screws M3 x 16mm
