Liczymy pasujące modele…
A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…
Liked the shelf by Pizzaman76 but wanted it a bit bigger so I made it 220x220mm
Print at a layer height of 0.2 mm If you want to make it bigger or smaller change the X and Y scale, leave Z at 100%
I tend to give a home to abandoned thinkpads with missing parts. I remixed my X200 HDD cover to fit a X230 I recently got. Printed without supports, 0.1mm layer. Fits like the original after a little bit of cleanup. Print Settings Printer…
This 3D Model is always helping me out even if i use a Bed Level Sensor to get the perfect first Layer. You can Stop the print after the First Layer its just heigher for better view. Filament: PLA, PETG, ABS, ASA Layerheight: 0.2mm
These are orientations I have made in order to fit this project easily onto a 220x220 built plate and save you the time
Found out my refurbished thinkpad x220 only came with one hard drive caddy arm. I wanted to also take advantage of the fact that you can easily swap the hard drives on the thinkpad x220 too.
Ahoj, toto je moje diplomová práce z roku 2020. Rád bych se s vámi o ní podělil, jelikož se jedná o plně funkční model. Jedná se o kopii Eachine Wizard x220 s drobnými úpravami (zpěvnění ramen atp. kvůli tisku z plastu). Šroubky jsou…
Adjust the scale using print scale on your slicer, this model is 1:10.
Here is my video explaining the process of making such wall arts:
2U sized mount for an ATX PSU in a 10-inch rack modified for a 220×220 mm build plate I would highly recommend printing in PETG rather than PLA, as PLA may deform from tension and heat. If you place this model in the centre of the build…
Due to the simplicity of the model no supports are needed. I printed with PETG with 0.2mm layer size on 0.4mm nozzle. The exact material and configuration you are using do not matter a lot though I guess.
PETG, 5% infill, 2 layers. Maybe 200x200 will be fine with small mods. If you want so, let me know in the comments, I'll create smaller versions then. It's a simple work, but boring and took me quite some time, so you don't have to waste…
Replacement badge for the Lenovo Thinkpad x220, its designed to be printed with multiple colors, but it can be printed in a single color as well. Size of the model : 26.5mm x 9.5mm Print settings: Layer height : 0.2mm Add color change on…
This is the same model, but shortened by 15 mm to fit in size for 220x220 tables (like Sapphire Pro).
Print in PETG Props need to be trimmed a litte bit
The first version I uploaded was 207mm wide. On my Ender3 v2 it would not slice. I changed the print bed size, it did slice then, but one side was not able to put the brim down correctly. I squeezed everything tighter and was able to get…
Bracket for Lenovo X220 X230 2.5" HDD / SSD. You need two pcs of this to insert drive into laptop. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: gembird PLA+ red…
Hi, this is my original project for Eachine Wizzard X220 V2 (but it will also suit to many other 5" quad drones). It's size is designed for typical antennas and Beitian GPS BN-880Q with compass. Print it in slow motion with 100% infill…
The painting “Cat moon halloween” for my Light frame for hueforge / lithophane arts This work was created for "Halloween 2026: Make It Move 🎃" Among the movable elements there is a hinge for the foot, which acts as a stand for the frame…
Stackable Drying Box 110x110x40mm 110x220x40mm Honeycomb Style Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this…
No need supports to outer part (because I added chamfer)
Quick print vase mode stackable tray box for mechanical keyboard keycaps. Holds up to 120u of keycaps. Prints both tray and lid in vase mode.
EACHINE Wizard X220 Feet (16mm) Drone skid plate/feet, designed for my EACHINE Wizard X220. I used M3x10mm Titanium screws with these feet, they go through the feet, frame and motor protectors to screw into the motor. The motor screw…
Parts are not oriented, I'll let you play with that in your slicer The larger piece does fit flat on 220x220 (longest length is 215mm) check original post for more info, and/or want to print it as a single piece…
I wanted a single print chess/checker board that would fit on my Ender 3 printer. I designed this board to fit with-in the 220x220 bed size. To print the darker squares, use post processing of gcode and enter a pause. Finally switch the…
Probably best printed in tpu or some sort of wear resistant filament
Relocates the antenna to a much more crash resistant location. Print in TPU, PETG or ABS
This organizer has two options one that is exactly 220 and one that is a 1mm smaller on 2 sides for printer that refuse to print the full size. Features: Top left scissor slot. Standard size sticky notes slot with a snug fit in the square…
Give your IKEA SKÅDIS wall system a modern, designer look with this fully custom distressed reinforced Voronoi panel , sized to perfectly match the original 220×220×5.1 mm SKÅDIS tile. Strengthened geometric lines + clean textured finish.…
everything split down the center for no support printing, use cuts of filament in locating holes and glue together. need 50 of the chain halves Category: Costume
Not for X220s. If you are interested in a version for the X220s you can contact me. I attached the gps module with 3m double-sided adhesive tape. but you can also use a cable tie (2.5mm). Layer height 0.2 - 0.32 TPU 95A
This is 220x220x250 Giant Cube Challenge for all Creality Ender 3 printers. You can flex on anybody that you printed a giant cube! Would take about 3 to 5 days depending on printing speed.
Print in TPU or PETG for best protection
(Google translated) The arrow stand is 220x200x82mm, for 8x8 arrows (64). The holes get larger and larger, from 6.7mm, 7.7mm and 8.6mm. Fits my ID 4.2, 5.2, 6.2 carbon arrows from min.1000 to 500 spine. The distance between the holes is…
Use the latest version of Orca Slicer and load the project which, will already have the pieces on plates with the correct colors and settings in framed and unframed versions. Print at 100% infill with a layer height of 0.04mm with a base…
A camera mount designed for Eachine x220 v2 fpv drone
The perfect level test for most ender 3 series and other 220x220 build volume printers Intended for 0.2mm layer height (if using a purge line you should have to shrink its width)
Designed for a BN-220 GPS.Need new Screws M3 x 16mm
This is a small 2 part model to mount an Juniper ex2200-12C under a desk. This model utilizes screws to fixate the switch. The triangle part is just for easier mounting as the screws are already spaced correctly. As this is an under table…
Print in TPU or PETG, replaces the LEDs
Full Protection, 10, 15, 20 and 25deg angles. Print in TPU for more durability and PETG for more cam protection (but will break while crashing) Use M3x25 Screws
"Introducing a highly versatile workshop organization system, meticulously crafted for customization and universal adaptability. This innovative design is perfect for anyone looking to streamline their workspace with a system that's…
"Introducing a highly versatile workshop organization system, meticulously crafted for customization and universal adaptability. This innovative design is perfect for anyone looking to streamline their workspace with a system that's…
Same as the original rubber mount, but adapted for a typical chinese action camera. Print instructions 50% infill makes the mount strong but lighter than the original. Print with flexible filament.
Very simple pot or garden tagholder. 6 fits on 220x220 print surface (like my Kobra Go) PETG prints raccomended if used outside.
Vertical stand for EX2200C-12P
"Introducing a highly versatile workshop organization system, meticulously crafted for customization and universal adaptability. This innovative design is perfect for anyone looking to streamline their workspace with a system that's…
It's pretty tight on Wizard x220,but fits. I attached a .blend file so feel free to widen it a bit if needed. You might need a brim, but I did it without and worked great on Creality Glass Bed. My setup: 0.4mm nozzle, 0.2mm layer height,…
A shorter base for the Ultimate router jig. Allows printing on 220x220mm Print-beds.
Gorilla Schnellwechselplatte mit Stativschraube für Sony WX220 Kamera Projektbeschreibung und Anleitung unter http://cool-web.de/3d-druck/gorilla-tripod-schnellverschluss-platte-kamera-smartphone.htm Video unter…
A slighty modified (improved IMHO :P) guard for the x220s camera. Print instructions Category: R/C Vehicles Summary A slighty modified (improved IMHO :P) guard for the x220s camera.
A simple, lightweight, snug snap-fit guard for arms and motors for Eachine Wizard X220HV. Designed to be very easy to print with TPU plastic. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2…
Added 17cm wrist holders, that was remixed from few model, not only original listing.
Stand for 220x220mm buildplates. x1 4mm glass x3 1.5mm thick steel or soft magnetic PEI, PET etc. There are two versions with or without hex pattern.
Print in TPU use TBS ND Filters: (https://s.click.aliexpress.com/e/_9ROQbh)
I modified the cover to accept two different types of USB-C chargers to make my ThinkPad tablet PC more versatile. I have also made a label for it as a .PDF on an A4 Page. Quick Info: This will only work or only make sense if you're not…
I'm making a 3d print print w/ all the random parts i have left over and wanted strain relief for this 12v 220x220mm heated bed i pulled off an old am8 and could only find ones for the connector types, so i made one for mine w/ the…
It is an adjustable Runcam 2 mount for the Eachine Wizard x220. Print Settings Material TPU Infill: 50%
The rear end for Eachine Wizard x220 upgraded with TBS Unify and stump antenna. Cut off the end of the top plate is required. Print instructions Printed in XT-CF20 by Collorfabb with installed hardener nozzle E3D 0.4.
Full Protection, about 30 grams. 10, 20 and 30deg angles. Print in TPU for more durability and PETG for more cam protection (but will break while crashing) Use M3x25 Screws Update 16/4/20 added 15deg Version
Covers I made to spruce up my boring MDR-ZX220BT headphones. Used double sided tape to glue those onto my headphones - just to keep it reversible. Printed with PLA on Ender 3v2. 0.2 resolution 100% infill 1 wall
The retaining clip of my S2 Lotus side repeater lamp broke off. I didn't want to wait or to pay more in shipping than the price of this repeater. So, I design this clip that slides over the broken one and that is hold in place by the bulb…
TPU for flexible, shock-absorbing properties or PETG for a stiffer assembly.
Custom Anet A8, Prusa Mk2S Y Carriage 220x220x5mm
iFlight XL5 / EX220 GoPro Session pod
A cam mount for a Dji O3 Air Unit on the Eachine Wizard X220 some tape is necessary to sunk it up on the post Print Settings Printer Brand: Anycubic Printer: Kossel **Rafts:** Yes Supports: Yes **Infill:** 70% Category: Parts
Layer height 0,2 - 0,32 TPU 95A.
Ce modèle est divisé en deux parties : Un conduit pour le câble XT60 qui évite que le câble parte dans les hélices et s'abime.(PETG conseillé pour plus de résistance aux crashs Une butée pour éviter que la LiPo ne glisse et tombe du drone…
Minimalistic ESC Cover for your FPV Quad Print time is about 4 minutes. I've designed a minimalistic solution to keep the ESC's of your FPV Quad save from your props in a crash . The slits on the top will probably help to keep the ESC's…
Kit de réparation pour phares Opel Speedster a coller ou a visser en fonction de la version choisie. Pour la colle, la Cyanolit ou préférence epoxy. Pour la version a visser il faut une vis M5 avec tête fraisée diam de la tête 7mm Prévoir…
modelo de Ender 3 s1 con volumen de impresión 220x220x270 listo para usar de base en orca slicer tutorial rapido
XT60 Holder to Eachine Wizard X220s Category: R/C Vehicles
Actioncam mount for the Reely X220 race copter. Print Settings Printer: Renkforce RF2000 Rafts: Yes Supports: Doesn't Matter Resolution: 0.1 mm Infill: 25% Notes: I´ve printed this in PLA using 4 solid bottomlayers, 4 solid toplayers and…
Foxeer Box 2 mount for WIZARD X220S, if you want to edit this file there are Fusion 360 files
The painting “Holo (Spice and Wolf)” for my Light frame for hueforge / lithophane arts Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings. Printing recommendations: To achieve the best effect, use a 100%…
The painting “Fire Goat 2027 #1” for my Light frame for hueforge / lithophane arts Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings. Printing recommendations: To achieve the best effect, use a 100% fill I…
Illuminated Display Case for 3D Models – V2 (250x220mm) This display case is designed for the aesthetic presentation of 3D printed figures, human models, and manga characters. Compared to version V1, the following modifications have been…
J'utilise une stack Speedybee qui est plus grosse que la stack d'origine du Eachine. La paroi ne fonctionne donc pas, étant trop étroite. J'ai donc redessinés une partie de la paroi ,moins longue, mais qui protège les fils. Il faut…
Best if printed in TPU or nylon
These are Mr. Steele V2 style pants for the RCX2207 motors from MyRCMart. The rcx2207 comes with the winding pretty exposed (of course its a bottom-less design), and I wanted to protect them a bit. Print Settings Printer: Prusa i3 Rafts:…
Ce modèle 3d adapte le eachine wizard x220s au air unit o4 de DJI.Il se compose : D'une adaptation des trous de montage d'un support de caméra (insérez un rilsan à l'arrière, puis introduisez un mouchoir découpés, puis plié entre le…
Works in PETG but better in PA or TPU 95A
Pour une transition vers le o4 lite, il vous faudra : "support émetteur o4 lite" "Support caméra o4 lite" Soit "body", soit "Réhausseur drone fpv(avant)" + "Réhausseur drone fpv Arrière" Le "conduit XT60" n'est pas compatible avec "GPS",…
Cet objet est destiné à ranger des plateaux de 220mm par 220mm à l'horizontal ou à la verticale avec un couvercle. Le couvercle est le deuxième fichier. Les problèmes de tolérances sont réglés. Impression conseillée en PETG à la verticale…
The painting “Kemonomimi blue flowers” for my Light frame for hueforge / lithophane arts Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings. Printing recommendations: To achieve the best effect, use a 100%…
The painting “Yae Miko Genshin” for my Light frame for hueforge / lithophane arts Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings. Printing recommendations: To achieve the best effect, use a 100% fill I…
I recently replaced the chassis for my X230 with a new old stock X220 chassis but realized only after installation that the full size DisplayPort left large gaps on either side of the now MiniDP port. It's just a simple insert you can…
The painting “Shaman Seira #1” for my Light frame for hueforge / lithophane arts Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings. Printing recommendations: To achieve the best effect, use a 100% fill I…
The painting “Loona #1” for my Light frame for hueforge / lithophane arts Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings. Printing recommendations: To achieve the best effect, use a 100% fill I…
The painting “Desert Demonic Fenec" for my Light frame for hueforge / lithophane arts Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings. Printing recommendations: To achieve the best effect, use a 100%…
I modified the divider grid layout for the condiment caddy.
UPDATE 2: Added a spring-loaded insert that will adjust based on your container's width! You will need a spring (10 mm in diameter, length based on your preferred "stiffness" of the clamp) and a bolt for it to work! UPDATE: Increased the…
The painting “Avali Avanturist yellow-blue” for my Light frame for hueforge / lithophane arts This painting uses a lightscreen, please be careful! Unfortunately, a photo cannot convey the full beauty and vibrancy of the paintings.…
This piece of cutting edge technology will allow you to remove the VGA port nuts holding the motherboard in place. I hope this finds you when you need it most. While working on my x230t i had problems grabbing onto the nuts as i didnt…
This is a replacement for the lower part of the rear cupholder. You can just push out the old one and glue this one in
Stackable Drying Box 110x110x40mm 110x220x40mm Honeycomb Style Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this…
This is a REMIX of the Stackable Containers by Bndzi. It was resized to 160x220mm
