SwingAway Camera bracket mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a simple bracket to mount a small camera at a 45degree angle. practical to monitor printers, plants, equipments...
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
simple SwingAway mount for lightweight camera (45degree~)
i created this to easily mount an esp32-cam near the ceiling, having the camera hang down at a particular position. it would normally have caused trouble since the camera would have been in the way each time i worked in this area. i then invented this simple SwingAway pivot and stopper. it enable the user to easily swing the camera out of the way and attach it temporarily near the ceiling in a horizontal plane.
there is a build-in 45degrees stop so the camera is naturally resting at that angle.
requires a 8mm fiberglass rod for the extension. the user can choose to have the camera at any length desired. pivot pin is around 5mm~ you can use just about anything laying around, even a wood dowel. simple jam it in or slightly glue your pin in place so it doesn't move away.
combined with my stick to tripod adapter: printables.com/model/578986-monopod-from-fiberglass-rod/files