Counting matching models…
Embroidery sock frame is a great tool, but the model needs some tweaks for brother 10cm hoop even after setting the params in OpenSCAD. The most important is that the model needs some room beneath. I made room beneath, strengthened it and…
As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…
Why 0.3 Nm? source: The right Torque for your Prusa XL Nextruder Nozzle by INVESTEGATE Printing open the PrusaSlicer file as project print the objects using PETG (DON'T throw the purge, may it is needed later). Object torque-case-B is…
Print settings: zero top layers zero bottom layers zero infill 3 perimeters 0.4 nozzle 0.2 layer height no supports I used PLA.
A 15cm X 10cm photo frame, optimised for fast 3d printing. Printing instructions 2 perimeters cubic infill 10% no supports 0.2mm layer height Because plastic shrinks when cools down after printing, you may need to enlarge the model on Z…
I recommend to center the laser from the software, then, using two vertical positioners (printed with different colors), manually center the engraver head as shown in the pictures. Also in the picture: Z-Axis lift:…
Bill of materials: PETG filament 12 M3x16 (or M3x14) screws mosquito net TPU filament (optional) superglue 2 magnets : 6x3mm Assembly instructions print the parts: assembly the rectangle frame using 4 bars and 4 corners, that snap…
The Towa Digital Tension Gauge is the perfect way to measure bobbin tension on both commercial and domestic style embroidery machines. Towa supplies L and M Style Bobbin Case Adapter. Here is an adapter for Brother bobbin cases for…
Usage, building instructions and materials: NEW !! 2024-10-21 - version 4: experimental new multi-material gears with print-in-place bearing improved design of the main body 1. Usage This is how this device is used to quickly load…
BOM: Multitool digital thickness gauge (3D model here) Instructions: print the left and right tools attach the tools to the Multitool digital thickness gauge use the device: Checkout a similar tool with ball bearing here .
Printing instructions filament: PETG 0.4 nozzle 2 perimeters 0% infill zero top layers zero bottom layers.
because glasses gave rounded faces, they don't make good contact with the rollers so increasing the presure helps. Inside the glass their is a wheel ( a Plastic Bearing 6200 10x30x9 from ali express ) with a TPU tire. It is connected to…
BOM: 2 Z809 ball bearings Multitool digital thickness gauge (model here) Instructions: print the left and right tools print 2 pins attach the tools to the Multitool digital thickness gauge use the device: Checkout a similar tool without…
I redesigned the front part of a cheap chinese thickness gauge to be able to attach different tools, like ones for belt tension check. The tools are uploaded as separate models. Bill of materials cheap chinese plastic digital thickness…
The Thinker of Hamangia (Romanian: Gânditorul de la Hamangia ) , also known as Thinker of Cernavodă or collectively The Thinker and the Sitting Woman , is an archaeological artefact, specifically a terracotta sculpture. This ancient…
You can buy a Prusa XL here and get 200 Prusaments .
Preparing the print Open the 3mf file as PrusaSlicer project (settings for Prusa XL will be loaded). If you a have a different machine than Prusa XL , to get more transparency you need to apply to your machine the settings I used from…
You can buy a Prusa Core One here and get 100 Prusaments .
Should be printed în PETG (PLA is too britle). You can buy cheap UM2 collets pack (10 pcs - $2) here https://s.click.aliexpress.com/e/_oBiPN3h Also checkout the model with PC4-M6 Pneumatic Connector…
To hold the filament you can use the provided rod or an M3 bolt (≥10mm) Also checkout the model with UM2 Quick PTFE Pipe Coupling Collet https://www.printables.com/model/1133522-optimised-prusa-xl-side-filament-bypass-um2-quick
You can buy a Prusa MK4S here and get 100 Prusaments .
Please read all the steps: using transparent PETG, print the model on a smooth plate ( I used https://www.aliexpress.com/item/1005007385189249.html or https://www.aliexpress.com/item/1005008566969906.html 100℃. For other plates, change…
Mikolas from Prusa : „Once you print a large layer from PETG or PP on this sheet and remove it, PLA will stick to it awesomely forever. Don't ask me why.😅 But we love this sheet at Prusa! I have it literally on every single printer in our…
Bellow you will find the list of materials and the assembly instructions. Bill of materials Here is the BOM with links: 230gr of Transparent PETG - Geeetech $12 per 1kg spool 5 ⨉ 100mm 2020 Aluminum Profile - $5 per 4pcs 1 ⨉ 300mm 2020…
Is your Prusa XL showing flickering toolhead LEDs or throwing the "Extruder motor is not spinning" error mid-print? This is a widespread issue caused by electrical connector fretting/oxidation – tiny movements in the Dwarf board cable…
The backpocket is for the battery recharger or for used batteries. I printed it with a 0.6 nozzle volcano, 0.6 layer height, 2 perimeters (3 on a 0.4 nozzle), 5% hexagonal infill using Geeetech transparent PLA. I set my Prusa Mk3S to 200%…
Horizontal holes ar not ok to be rounded. Best to use this romboid cylinder to make a hole suited for 3d printing. The model can be added to Prusa Slicer gallery and used as negative volume. Adding to gallery: After that, it can be added…
You can buy a Prusa Core One here and get 100 Prusaments .
Printing instructions 100% infill Optional for fast printing: zero top and bottom layers zero angle for infill zero perimeters max speeds and flow Installing of a vacuum bag You need some standard 13mm double tape. Steps: put the spacer…
a small handle for the transparent grid of brother embroidery hoop
Check out the magnetic version : BOM PETG T spring nuts M3 for 3030 - https://a.aliexpress.com/_Eyj33i0 or 3d printed nuts for 3030 for M3 screws M3 screws - 10 mm - https://a.aliexpress.com/_EHrTBG4 A1 silicone brush -…
PEY plates are perfect for printing TPU. The jig can be used to place a 350x350 mm plate, like this one from aliexpress: https://s.click.aliexpress.com/e/_on2kPGH Model includes a pin to secure the jig while placing the plate.
To print in vase mode (spiral mode) in PrusaSlicer, go to Layers and perimeters and enable spiral vase in vertical shells. I also uploaded the freecad source file. I printed it with 0.6mm nozzle and 0.4mm layer height.
3-4 perimeters 0% infill ASA, ABS or PETG 0.2mm layerheight no supports
Prusa XL needs an filament loader. This model is powered by Prusa XL printer power source (24V), is easy to print (no supports, 0 infill), install and it works even with flexible! Videos Bill of materials PETG filament 50 cm cable 20 awg…
When printing tall models, the PTFE tube linking the MMU selector and the extruder can get hanged on the middle roller carriers. This slightly modified cross bar and roller carriers prevents this problem.
for nextruder, Prusa recommends : “The specified torque value is 1.5 Nm (13.3 lb-in). The use of a torque wrench is recommended” for nextruder nozzle retainer screw is 0.2--0.3 Nm ( source ): for E3D v6 block, Prusa recommends : “tighten…
In a small Neolithic village nestled along the fertile banks of the Danube river , two souls, bound by a love as enduring as the stone tools they crafted, found solace in each other’s presence. Their days were filled with shared…
you need: 5 one way bearings (CSK8PPT type, 8x22x9mm backstop cluch - cost $ 1.85 x 5) - https://www.aliexpress.com/item/33040222926.html print 10 body print 5 tyres for the bearing 5mm width rubber band (to put on the tyre for grip). You…
BOM PETG T spring nuts M3 for 3030 - https://a.aliexpress.com/_Eyj33i0 or 3d printed nuts for 3030 for M3 screws M3 screws - 10 mm - https://a.aliexpress.com/_EHrTBG4 A1 mini silicone brush -…
transparent PETG, 5% rectilinear infill. I used a 0.6 nozzle, 0.4 layer height (except top 0.2 layer height)
Open as project in PrusaSlicer . You can: edit the text put your logo paint it Print using a multimaterial if possible. No supports needed, sacrificial layer included: Here is Prusa XL printing it:
Buy using Violent blower link on Aliexpress
BOM PETG T spring nuts M3 for 3030 - https://a.aliexpress.com/_Eyj33i0 or 3d printed nuts for 3030 for M3 screws M3 screws - 10 mm - https://a.aliexpress.com/_EHrTBG4 A1 mini silicone brush -…
I used: PETG transparent filament 1 perimeter and 0.4mm layer height (0.8 nozzle) zero top and bottom layers global zero infill a box modifier (15mm height) with 10% aligned rectiliniar infill (it is important that the infill is paralel…
BOM 87LED 24V 29.5x3.5cm COB compartement cabin ligth - $3 50 cm cable 20 awg cable - $10 (for 30m ) Printing PETG , 3 perimeters, 10% infill, 4 top layers (3mf and Freecad source file included) Assembly
Print settings: vase mode, 0 top - bottom layers. 0.8 nozzle
a model for first layer check on toolchangers (Prusa XL, Snapmaker U1)
the hinge includes a PETG layer
These are all currently available results.
