Counting matching models…
Pokeball -1 - Single -piece model drawn at Ø2.25". Example above was printed in TPU with 2 walls and 10% infill with a brim. 0.4mm nozzle & 0.2mm layer height. It weighs about 10g. There's a flat on the bottom to facilitate printing. If…
A variety of sized yarn bowls 7x4 pictured just holds my largest yarn ball. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.4mm x .15-.25mm layers (variable) Infill: 1.2mm wall x 40% infill…
The planet Saturn, designed to be made with rainbow material and glued together. The smiley face in the center of the ring is intended to use more material and make the colors change faster. The details at the joint between the top and…
Can be printed from PLA, but PETG is preferred for weather resistance. I use 1.5mm walls, 0.25mm layer height and 30% infill. Print with support if using the bordered version. Add your own logo or letter from a separate file to add or…
A calibration block for 3D printers. This has gaps from 0.05 up to 0.5mm with labels on each one. Test it with whatever your preferred print settings are.
Made on my ender 3. The wall thickness and infill is critical to make this model (D) float correctly at the water line. I used a 0.4 mm nozzle, 0.2mm layer height, 1.5mm walls, and 15% infill. Tree supports work well. A solid version of…
Print with enough wall thickness so the hook end is solid. Orient the part so the main flat end is against the build plate. It should print fine without support using a 0.4mm nozzle and 0.15 layers. 1.2-1.6mm walls and 25% infill works…
A very simple set of stairs that can be printed for a dollhouse. Print with 0.4 or 0.6mm head 0.2-0.25mm layer on 0.4mm head. No support needed. Use a “fuzzy skin” modifier to add a carpet texture on the stairs. This will print on a 10…
A stackable basket for onion & potato storage in your kitchen. This is as large as can be printed on an Ender 3. The Basket-2 and Top-2 have been redesigned to be lighter so they can print faster and use less material at some small cost…
Just a fun Spider-bot character to add to a spiderman costume or as a toy/decoration. There's a loop at the bottom to attach a strap or a flat surface for attaching a magnet Use small layers (0.15-0.18) and support.
This Texture block is a demonstration of various textures. It was intended to be safe for a toddler to play with, but it also works as a fidget toy with all of the various textures to run your fingers across. Print Settings Printer Brand:…
This is a fountain pen that uses a Jowo #6 nib unit & Standard International Cartridge/converter. You will have to purchase those separately. I recommend the Opus 88 units available from JetPens, but any Jowo #6 housing should work. I…
1 inch sides. 1.6 inch overall diameter d20. Designed to be printed from flexible TPU to be safe for children to roll safely, but works well as PLA too at 100, 150, or 200% scale. Print Settings Printer Brand: Creality Printer: Ender 3…
This is my original model. However, the size was inspired by https://www.printables.com/model/456661-choochoo-a-3d-printable-4-tone-train-whistle-v31/comments/840929 200% size which sounded great but took a lot of air. After 9 iterations,…
Make from PETG for better chemical resistance and for cleaning. Hand washing is recommended The flat cookie cutter will print with almost any setting. The roller should be printed vertically with the flat end on the bed. I did not need…
A re-creation of the standard plastic tinker toys plus a few new versions. Designed with my niece. Use with 0.375" dowel rods. These can be printed with PLA and any settings. I chose a 0.4mm nozzle, 0.2mm layer. 2-3 walls, 4 top & bottom…
Print with 2-3 walls (1.2mm), 0.2mm layer height and 15% minimum infill . No support needed. Update 2026-03-27: Added new versions with 2 areas and 1 area. The big open tray works well as a dice rolling tray too. Update 2026-04-12: Added…
Print 0.25mm layer height with 0.4mm nozzle. 1.2mm walls and 15% minimum infill. This should fit comfortably on the table or in the hand.
Print the main board and vase at a 45 degree angle. Will just barely fit on an Ender 3 The main board has support designed in. No need for extra printed support if using a 0.2mm layer height. The base can be printed with a 0.2-0.25mm…
A train for young kids to play with that has stackable elements. Assembles without glue. You'll need 6 wheels and hubs for an engine, 4 of each for the car. the engine and each car will hold 3 blocks high. Minimum reccomended print…
Uses flat-head screws or 60x10x5mm rectangular bar magnets to mount. Print each holder upright without support. Print the base plate flat against the table, using support for the slider joints. Use 3-4 walls to give it maximum strength.
Tough PLA works best. Regular PLA can be brittle. Print with a 0.4mm nozzle max. Adaptive layer height down to 0.1mm because there's fine detail on all of the parts. The inset adapter goes behind the refill. It may be trimmed or shimmed…
This is a fountain pen that uses a Jowo #5 nib unit & Standard International Cartridge/converter. You will have to purchase those separately. I have used an Opus 88 nib unit purchased from Jetpens for this build. I chose to style this one…
Centerpiece for Mexican Train Dominoes. fits a domino that is 1" x 2" -1 model is the regular size -2 model is smaller and can be printed in about 70% of the time with 50% of the material. Print Settings Printer Brand: Creality Printer:…
Designed for a 1/12 scale dollhouse with my niece. Use a fine layer height (0.12mm) and support the bottom side of the bed for best results. Changing up the top surface pattern in your slicer can give the fabric a textured look. Other…
2 bases which can be printed to go along with a set of 1 inch Tetris blocks and turn them from stacking blocks into a balance game. Print light, 2-3 walls and 15-20% infill. 0.2-0.25mm later height with a 0.4mm nozzle.
Tiny models to fit on a 12mm grid. designed after weapons rather than humanoid minis because it's hard to print something recognizable that small with FDM. Print the round “standin” one on its flat base without support. it works best if…
Update: I've become aware that the section may not fit most standard Jowo #6 sections as this was designed while I was using the Fountain Pen Revolution nib & feed units and was unaware that there are 2 different form factors. While fully…
Update 2026-09-27: See my new version for multi-material printers here Folding Cribbage board for 3 players. This will fit a deck of cards in the middle. The tracks are at different heights so you can color the tracks with a simple…
Prints best if you use the Adaptive layers feature. Assuming a 0.4mm nozzle, use a minimum layer height of .15mm and an upper layer height of .25mm so it can print the threads well, but also print the thin end quickly. 100% infill works…
Travel sized game for Mills, also known as 9 Men's Morris. It's an ancient game that anyone can learn, but also takes skill, like Tick Tack Toe for those who like chess. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
These notched blocks can be stacked up across each other to build complex rectangular structures. Great fun for kids. All of the blocks are rectangular in section with 45° chamfers so they can print in FDM without support. The standard…
Print with 0.2mm layer heights. No support needed.
Print the pin on the large flat head. Print the guide on the flat side. Neither will need support. Print the spool holder on the side with support “touching buildplate only" and then add custom supports on the areas that still overhang at…
Print with a 0.4mm nozzle max. Adaptive layer height down to 0.1mm because there's fine detail. Print both parts with the flat face down and use a brim. No support should be necessary. Print them one at a time for the best result to…
Sewing machine pattern cam for 1964 Kenmore 158.650. Basic Zig Zag. This may fit other Kenmore sewing machinemodels. After finding that replacement parts were just too hard to find, I decided to just make one myself. The blueprint is…
Intended for resin printing. It writes a bit dry and has higher feedback than metal or glass pens, but it's much easier to replace.
5 lightswitch cover is made for a freestanding metal box, not a drywall installation. Large single opening lightswitch plate is modeled off a standard cover. It's not relief cut in the back. The remote holder is designed to hold a small…
Works well with the Polymaker cardboard spool adapter. https://www.printables.com/model/495778-polymaker-cardboard-spool-adapter Print with at least 1.6mm minimum walls and 25% minimum infill. the PIN and GUIDE print without support, The…
This is a tiny pen that'll only take Standard International Short cartridges. If you're looking for a full-size pen. Check here: https://www.printables.com/model/747037-jowo-6-fountain-pen This is a fountain pen that uses a Jowo #6 nib…
A Knockdown target intended to be used with my pokeballs https://www.printables.com/model/617378-pokeball or similar size & weight ball. This is designed in such a way as to only fall down if the plate is hit rather than the lever arm.…
Broken out from my Clock design https://www.printables.com/model/1127210-hummingbird-fuchsia-clock Print with 0.4mm or smaller nozzle. 0.12 - 0.16mm layers. Edit 2025-09-03: Updated with thicker connection point and larger hole so these…
Works best when printed in multiple colors so you can see the contrast with the X on the bottom and the other letter on the top. To change the colors in Cura if you're using a single nozzle printer, use the options from the title bar…
Folding Cribbage board for 3 players. This will fit a deck of cards in the middle. It's just small enough to fit on a standard 200mm square bed. The tracks are at different heights so you can color the tracks with a simple material change…
Earring holder is 10 inch tall as-drawn with 5x 10 inch crossbars. Holds 36 hooks (18 pairs) and as many studs. Great for large earrings. I made mine on the Bambu X1C. To print on an Ender 3 or Prusa Mk 3, the project will need to be…
Works best if you print the inside and outside seperately. Requires no support. 0.22 layer height is reccomended on a 0.4mm nozzle. PLA Pro works best. Orient the inside on the large base, Orient the outside on the end so the open end is…
Designed to print without support. The coloring will need some kind of multi-material printing system. Give it at least 2 walls and 15% infill. 0.2mm layers should look fine on a 0.4mm nozzle.
Prints fine with a 0.4mm nozzle and 0.25mm layers without support in 4-6 hours. One version is provided with a base. One version is provided without any extras so you can add your own base or mounting holes.
My own take on a spool adapter to allow Cardboard spools to work with Material manager systems Prints without support, flat on the buildplate. UPDATE 2024-11-18: Added the “extra-holes” version because none of my holes were lining up on…
WORK IN PROGRESS Upper wind deflector aftermarket part for Goldwing Motorcycle. Logo model thrown in for fun. Print from PETG to better withstand the outdoors. Category: Replacement Parts
Optimized for 0.4mm nozzle. Should be printed with 0.1mm layer height The centerpiece can be found at the following link: https://www.printables.com/model/373216-mexican-train-dominoes-center-piece
A bookend representing my family members all reading. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .4mm x .15mm Infill: 30% ; 1.2mm walls Filament: any PLA+ any Notes: The Woman will need the…
Designed to hold a Shure PGXD2 wireless microphone (35mm). I've included the 30mm drawing too and the STP for the original. Additional hardware required: The microphone stand threads are 5/8-27 UNS. You can buy an adapter to fit a 1/4-20…
The bucket itself can take over a day to print. I used 3 walls and it's a bit heavy, but sturdy. 2 walls and 15% infill should work fine. 0.4mm nozzle with 0.25mm layers. The bucket should print without support If needed, drop the model…
An adaptation of my Fountain pen design for the Pilot G2 gel pen refill https://www.printables.com/model/627346-kitless-turned-pen-jowo-6 Follow the instructions provided on the other page. A tap and die set will be required to finish…
Size: The individual squares on the board are 1.75 inches. The bases on the chess pieces are 1.5 inch octagons. The pieces themselves are 0.625 inches diameter approximately. Chess board and bases are designed so that you can switch…
Print oriented on the largest flat side. 0.4mm nozzle and 0.22mm layer height recommended from PLA Pro. No support needed. Warning, the sides of the base are thin and tall. This will not hold up to mild abuse like my other box designs.…
Print in place using supports as “touching buildplate only” to support the handle. Use thick walls of 1.6mm.
Designed for a 1/12 scale dollhouse with my niece. Print 1 couch and 5 feet which will press-fit in later. No support necessary Changing up the top surface pattern in your slicer can give the fabric a textured look. I also used gyroid…
Print with 0.4mm nozzle and 0.15-0.2mm layer height. 2.5mm walls and 40% infill at 220°C for maximum strength. Orient with the rail mount side down. Use a support interface for easy removal. Because of the large surface area, some designs…
Simple pen holder for your corkboard or foamboard. Holds a pen or pencil in the shallow cup. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .4mm nozzle x .2mm layer Infill: 1mm walls, 30% infill…
Cribbage board in the shape of Mickey's head. This will just barely fit on an ender 3 sized printer. Be sure to take extra care with bed adhesion. the holes are about the right size to fit a set of colored toothpicks, or you can print a…
Tough PLA works best. Regular PLA can be brittle. Print with a 0.4mm nozzle max. Adaptive layer height down to 0.1mm because there's fine detail on all of the parts. The inset adapter goes behind the refill. It may be trimmed or shimmed…
It's just a set of soft jaws I needed to draw for drilling pen blanks. Can be scaled for your own needs. Print Qty 2. Print with thick walls, 2.0-2.5mm and 25-85% infill as-desired for the strength you need. For PLA, use 215-225°C nozzle…
I was having a problem with the Creality multi-kilogram spool holder. Once it would start turning, it would continue to roll and unspool more material which would then fall off the spool and bind up. This is my fix to help keep a 3 kg…
This version has optimized tolerances for 0.8mm nozzles and to be printed with a break-off support material. Hardware required: ¼-20 button head screw, 1 inch long, ¼-20 nut, ¼" fender washer. 0.25mm layer height, 2.5mm walls, top, &…
Based on my previous model https://www.printables.com/model/747037-jowo-6-fountain-pen This is a fountain pen that uses a Jowo #6 nib unit & Standard International Cartridge/converter. You will have to purchase those separately. I…
This is a more advanced version of my previous design for people who really like threads. https://www.printables.com/model/865355-turned-pen-mockup-jowo-6-bg-artforums-mandrel If you're looking for a printed pen optimized for printing…
Angled offset pen holder for a Bic pen. Just add a pen tip. You can also attach the original body onto the backside (not shown in picture). This holder has a 53 degree angle from the table which fits my specific holding angle and makes…
Designed to be printed with a 0.4mm nozzle and 0.2mm layer heights from PLA. The back is 0.080" thick and the overall size is 2 inch. Color changes can be done at layer heights using Cura's menu "Extensions/ Post Processing / Modify…
Designed with the Snapmaker U1 in mind. This will take a lot of purge material otherwise. Use at least 3 walls for strength.
A special request to make a jurassic park themed pen from my normal model. You can color it yourself by separating out layers. I did my own print on the Bambu X1C. Remix of my own model…
Tough PLA works best. Regular PLA can be brittle. Print with a 0.4mm nozzle max. Adaptive layer height down to 0.1mm because there's fine detail on all of the parts. The inset adapter goes behind the refill. It may be trimmed or shimmed…
This version has optimized tolerances for 0.8mm nozzles and to be printed with a break-off support material. Hardware required: ¼-20 button head screw, 1 inch long, ¼-20 nut, ¼" fender washer. 0.25mm layer height, 2.5mm walls, top, &…
Similar to my other clocks: 1 https://www.printables.com/model/1127210-hummingbird-fuchsia-clock 2 https://www.printables.com/model/1404565-hummingbird-clock-4 You can use the components from here:…
Simple Hair clip model for 60mm or 80mm hair clips. Press-fit on. For the simple bar, a bit of fuzzy skin painted on the outside looks good.
Small vials for crotchet finishing needles and other such small items. Prints best with a 0.1-0.13mm layer height on 0.4mm nozzles Use adaptive layers to minimize printing time. 2-3 walls, 1.0-1.6mm bottom layers. 15+% infill. Will print…
An improved version of my G2 pen which can be found here: https://www.printables.com/model/491413-pen-pilot-g2-gel-capped The edges were widened to reduce the need for a brim The clip was shortened to make it more robust. Tolerences…
Print with whatever standard settings you use on your printer. Then check the X, Y, and Z dimensions for dimensional accuracy. Use the 10mm width of the section to verify your extrusion before adjusting the XY steps. Don't forget to check…
Use filament hinges for the legs. 3 walls and .16mm layer height works well. The little fences fit losely in the holes, they can be printed a bit thicker if you want a more secure fit. The base is the hard part, such a large part can be…
If you're looking for a printed pen optimized for printing with a 0.4mm nozzle, use this instead. https://www.printables.com/model/747037-jowo-6-fountain-pen This model replaces my older test model which was based around the Fountain Pen…
SLS Rocket shaped keychain in the maximum cargo configuration. Can be printed with 3 different colors by level to get a true look. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .4mm x .15mm…
Holds a Pentel RSVP refill, providing a larger area to grip and without the rubber which can become sticky over time. This version does not include a cap. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes…
Basic Maraca and Hockey Goalie stick rattler. Can be filled with whatever you like to create the sound. I used 6mm airsoft beads (which can be quite loud). Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Uses 1-2pcs of 32mm x 3mm (1.26 x .125 inch) magnets to grab a magnetic part. Secure it with a bead of hot glue. Also requires one ¼-20 button or socket head screw. Press the release lever in the handle to drop the part. Print it heavy.…
You can use the components from here: https://us.store.bambulab.com/products/clock-components-kit-011 The back mounts with M2.5 x 6mm long screws (same as my pen models) https://www.mcmaster.com/92010A016/ This is made with layers so it…
Santa's belt clip is now a hair clip. Fits a 80mm barrette. The press fit is tight so use a tool to press on the side and rotate the clip into the slot. Derivative of my simple hair clip:
Print with 0.2-0.25mm layers. One top, one base, and 2 feet. After printing, secure the feet with a bit of super glue. Use the “Cutting Dovetail” and Cura's Modify: Cutting mesh settting set to 0 walls, 0 top/bottom layers and 0 infill to…
Broken out from my Clock design https://www.printables.com/model/1127210-hummingbird-fuchsia-clock Print with 0.4mm or smaller nozzle. 0.12 - 0.16mm layers.
Print with 0.25mm layers. This is a print in place mechanism. Do not use support. May take some force to break the bottom portion free the first time, but after that, it slides freely. Use the “Cutting Dovetail” and Cura's Modify: Cutting…
Similar to my other simple sliding boxes, This one is 2 inches wide, 3 inches long, and 1 inch deep. The STL files also include a blank inner box in case you want to customize the text or not have any. The blue pumpkin nib is painted on…
Load up the 3MF file and print each solid as a different color. Works best with Arachne slicing and a 0.4mm nozzle. Edit 2025-11-24: Added version 2 files and 3MF which is multi-material only and prints face-down so the bed texture is…
Simple phone stand with a humming bird motif. Prints best on a 5-material machine. Several different color schemes are offered in the 3MF EDIT 1 2026-02-08: Added -2 version for 4-color AMS with separated press-fit medallion
About the 3MF files: The X1C_02 file uses a 0.2 to 0.3 mm nozzle to make the find detail on the text The Snapmaker U1 file is the whole base which is 3 colors plus support (4 material). The A1 file is all the parts that print separately…
Filament: Overture copper https://a.co/d/07cZndZZ Overture silver https://a.co/d/04nMbokB Overture royal gold https://a.co/d/0dL59g3U Polymaker Black PLA pro. I used clip https://a.co/d/0iaoRQTy from Amazon Hooks https://a.co/d/01ntnJGN -…
New multi-material printer version of my compact foldable cribbage board Update 2026-10-08: Made the hinge portion thicker to support more reliable printing.
These are all currently available results.
