Counting matching models…
For M5 C Click Here Update 4/17/2023: v0.04, uniformalized all the drawings. I've also added more tolerance to the magnet pockets from 2mm to 2.20mm Update 4/11/2023: v0.03, Modified height dimensions to accommodate ThisFact's M5 Build…
These are accessory side bin/tool tray for AnkerMake M5. For Accessory Bin2 with simplified printing and assembly, please see this link I created these to hold leftover filament from skirts, brims, and fallen supports. In this package,…
Current Version: v1.1 & v1.2b Small update: 4/16/2023: It's come to my attention there is a new type of hot end block that has two pegs. I've taken the liberty to do some modification to my block design and accommodated the pegs. This…
This is a quick 5x5 Bed Leveling Test that I've made for AnkerMake M5. Each cell is enumerated to ensure you have a proper chart. The cells are made to 0.20mm thickness, and the enumeration is 0.50mm. You can measure the cell, letters, or…
Edited 10/5/24: QUEST 3 VERSION AVAILABLE Cool new Features! Made this grip Quest 3/Quest 3S compatible (Grip LED, Geometry Changes) Added a belt hanger assembly Added a knuckle strap battery door Added a knuckle strap Backwards…
This is a modest upgrade to the Surefire X300U-A by replacing one or both of the existing rail clamps with an extension piece. Background: These were iteratively developed in about 9 stages. I later found out similar products already…
This is a work in progress The project started as a concept for a single print unibody open chassis. As I met the limits of my Prusa MK3S, I realized it was not possible and broke down the design into parts. The enclosed design includes…
This is a work in progress The project started as a concept for a single print unibody open chassis. As I met the limits of my Prusa MK3S, I realized it was not possible and broke down the design into parts. The SFX version backplate does…
Hello Everyone, This is a small tool for cutting PTFE for the AnkerMake M5. Proper PTFE length is a way to prevent filament blowouts that can break your printer. I've purposefully made the channel length longer than your standard PTFE…
Work in Progress! Needed: Testers. Please report any issues. These are side accessory bins for the Ankermake M5C EDIT 8/28/23: Corner geometry has been adjusted.
This is a replacement shroud design for the EVGA 3060/3060TI XC with 2 fans. It will fit both Gaming and Black edition GPUs. I wanted a matching GPU to my Monolith rig, however, it seems there are no companies producing a Sub205MM GPU in…
This project is in alpha testing. As such, it may have goofs and slight fitment gaps. I'm working on that as I acquire another GPU to test the fitting. Your feedback is highly valued in this stage Update 7/22/2023: Added a new assembly…
All credit to @ AustinDennis_479320 , @Jared_273781 , and @BlakeDouglas_545792 who created and tested the original design The following modifications have been made: The screw holes are shrunken down to 2mm diameter because my screw holes…
This is a work in progress
Updated 3/10/25: 5.0L Launched! Shoutout to /u/hatigarm work workshopping this with me Soft launch/Work In Progress: spiggytech 4.9L SFFPC General stats: Dimensions: 110mm x 195mm x 229mm, 4.9L overall (minus feet & carry handle) ITX…
This is a simple ITX APU/IGP Small Formfactor PC (SFFPC) I was trying to make a small server device with a spare ITX motherboard and needed a case quickly. As such, this design is pretty rudimentary. Edited 9/2/23: Small dimensional…
EDIT! 4/26/2023: Added a variety of combs that curve width-wise for a more fanned out look. These are combs in varying degrees of bend for the purpose of management in a “hard line” style. The type of cable been tested on are EVGA custom…
Revisiting a concept I made about a month ago, I started from the ground up on a new design piece. The design directed I wanted to move towards was to give it a large amount of activity when assembling the case, so that there would be an…
Small adjustments to @Chris_303543 very badass design. To complete this project, you will still need to download and print the non-included component s. Please get the V3 components. I've also added my own knurled “screw fasteners”. I…
Modified the excellent design introduced by @ SeeJingQi_1472693 for more adaptability and cable management. Moreso. I had a lot of cable to ziptie and wanted somewhere to bundle it. Print 15%, 4wall, with the back down flat against the…
This is a simple ITX APU/IGP Small Formfactor PC (SFFPC) A further development of my previous PicoPSU Chassis to now include a single slot for a LP card. The idea is to flex the design in case I need to turn the computer into a router or…
Work in Progress: This is a backplate mounted cooling solution for EVGA 3090FTW3, it can be used with heatsinks to enhance the cooling ability of the stock backplate, which has heatpipes. I realized the o11 mini's airflow was not doing…
Hello, Enclosed is a custom replaceable shroud for the ASRock A380 Challenger ITX. I found the original a bit boring and wanted to match the design to my case. Assembly Instructions: Print in PETG @ 15% infill Flat sides down. Do not…
Work in Progress. Please give feedback if you have it. Break into Objects. Print on the sides. Tested with ASA @ 0.12mm height, 100% infill, +12 wall Hardware Required: 2x M3 x 25mm screw Pan or Hex head recommended. 2x M3 Nylock
The project started as a concept for a cylindrical “Trashcan” Chassis for the ASRock X300M-STX found in the Deskmini. The whole thing measures 225mm tall from end to end, not counting feet. 175mm in overall diameter from the widest parts.…
This is a quick project I made in collaboration with a friend. It is a small AIO hose manager for the ASUS Prime AP201 chassis using a Arctic LF2 280mm AIO. His chassis had a collision with the motherboard, so the AIO was placed in an…
USE AT YOUR OWN RISK Nozzles are in short supply at the moment so I developed this tool block as a means of floating by until someone produces dedicated M5 nozzles. I have the hardenedsteel ones, but I don't like working with them. This…
These are 4mm shims meant to clip inside the Z-Axis towers to make the M5 compatible with Volcano hot ends. Print 2x, PLA/PETG @30% Cubic (100% recommended) You will need the following items: Polisi3D Volcano Hot End Block Volcano Nozzle…
Building on my previous 4.9L design, and bringing it to contemporary standard, I present the 5.0L It has the following updates: Removed all heat inserts. You can build this with normal M3 nuts Can be built with one screw pack! No more…
Updated 10/27/24: Low Profile design now uploaded. The old style basket did not allow you to put it into a case. This lower profile model should fit into most cases. I really like the design set out by @ SeeJingQi_1472693 and wanted to do…
UPDATED 8/26/2024: putting up some single fan 120mm brackets that never panned out for me. But you might find it useful. This is a small tophat addition to the Sirius S40. It is made to add some more air movement inside the case. You can…
EDIT! This item is now obsolete, the newest design can be found here: https://www.printables.com/model/319513-spiggytech-portable-chassis-for-asrock-x300m-stx This project is a work in progress The idea is to build a small enclosure for…
This is a hot end service tool that I made up very quickly to conduct service. AnkerMake community member Austin Dennis found that this block shares mounting points for the AnkerMake M5. I needed a tool to work on the block when it is…
Updated 6/3/2023 Added screw holes for TPU feet. Also added feet to be made in TPU. Redesigned it from the ground up. This project is a work in progress I took the strong points of the original design and revamped it in such a way that…
This is a phone/mouse holder that I designed to match with NoycePrints' Headphone stand . I really enjoyed the stand and wanted something similar to hold my phone or mouse when not in use. I switch between the Logitech MX Master 3S for…
This is a three piece award made based on the secret panel of this comic. Intended to be printed by the Bambu family of printers, but any printer with a MMU or AMS will work. Small instructions: The objects seem like they don't have text,…
This model has been discontinued from development. A new design can be found here. Designed it from the ground up. This project is a work in progress At Sub3L, this is a 3D Printed complete chassis for the ASRock X300TM-ITX . The cooler…
WORK IN PROGRESS This is for the AnkerMake M5, specifically the retraction indicator mod. (see images) The mod is done by detaching the bowden tube and adding a piece of PTFE tube. The new segment will now raise during retraction so it…
[WIP!] This is the trial run of my own scratch-built sight tool. The original design started to crack on an aftermarket slide, which brought me to scratch-build the design with more meat and more gripping power. This design is the product…
These are some quickly assembled standoffs to extend the Mesh section of the Fractal Design Meshify C. The intent is to give +/-25mm of space so that a longer GPU can be used in combination of a standard thickness radiator by placing the…
This is a small magnet test for figuring out tolerances. It is what I used to figure out the magnet holes in my AnkerMake bins. You can tilt the tool and add supports to make it print wonky, replicating what it would be like to print a…
From The Battle Cats game on Android/IOS. Gamatoto Level 24. What you get with this kit: Gamatoto a base to pose Gamatoto Standard Issue Necktie/Headband Bottle of “Favorite Beverage” Yakitori Stick What is not included: Karaoke let me…
This is a simple magnetic poop bin for the Bambu Labs P1P, X1, and X1C. I made it as a quick solution. The magnets are 5mm x 2mm disk magnets.
This is a tool meant for assembling and disassembling the OEM spring guide of the Springfield Armory 4.5in F and Comp. The actual tool is too expensive to buy for a one-time job. $37+14 shipping, probably tax. Print one of these, $4in…
Stuff you will need: Two M3x4 (@5mm) Heat Inserts (Goes into the holders) Two M3x6mm screws (Secures holders to the L-Ears) M3x8mm works too. (Optional) Two M3x20mm Screws (Optional) Two M3 Nuts How to Print it: The L-Ears can be printed…
I made a box-cat that looks like the tiramisu cat
For use with the Evike Spitfire 28mm Tracer I noticed that some come out of the box very tight and difficult to unthread. This handy tool is so you can unthread the endcap without using pliers, clamps, or vices which can mess up the…
These are all currently available results.
![AnkerMake M5 "Mouth Guard" Ducts [Redux]](https://media.printables.com/media/prints/465630/images/3817259_c15f00bc-2d80-4deb-98fa-0996217b2391/20230428_210523.jpg)
