Counting matching models…
This is a scan of a small cat statue in a stretch pose. The statue was constantly being knocked off the window sill by our real cat who apparently didn't like the competition. The statue had some damage, so I repaired what I could and…
This is a high resolution scan of an antler off of a deer. It's about 12" wide by 17" tall but it can be scaled to fit your printer. I tried to set the scan in a good position to print, but some adjustment will be necessary. A great trick…
I downloaded this file off of Grabcad. The author of this version is Hans de Ridder who made some changes to the original by Ferdi Kahraman. I repaired some issues to the model and made printing possible and easier. See link…
***Update: Aug 18, 2025*** Added left side cutter. This was actually the original way I did it and was unpopular in the discord during development due to widespread superpinda use at the time. Obviously with the cutter on the left, the…
This is a remix of one of my own designs, Cat stretch. I reduced the cat mesh to a lower poly count, and then copy rotated them into 3 positions forming a circle, and then rested a nice sized (almost 8" in diameter) dish balanced between…
The wife wanted this to help her when she paints her finger nails. You can adjust the height to suit by scaling it in the vertical axis in your slicer. Category: Accessories
This is a remix of QuinLed Dig Quad case by subboo on thingiverse. See link to his design This a case for the quinled dig quad v3 with ethernet (abe) I include the step file if you wish to make changes. I provide a couple of variations.…
Just got a David SLS-2 scanner and this was a rubber facehugger that came with the computer game AVP (preorders), that I just had to scan. It came out pretty good for a first attempt. Great scanner btw I love it. Anyway, this might be…
* Update 9-10-22 * Updated scan with some minor error corrections and positioned the scan with the base of the statue in the x-y plane. This is a scan of a cat dressed up as a vampire for Halloween. Enjoy! If printing via FDM, please…
This mounts to an xbox style wireless controller. It maintains the right joystick control in a centered position while allowing backward and forward motion only. This allows for an easier good swing in the advanced modes. (e.g pro). This…
***Update Oct. 28 2025*** I now include the stock vtx plate exact replica, STL and STEP files included This is a model of the atomrc penguin's plastic nose that screws on to the front. You can print one in any color to accent your…
This is a trellis that can be scaled to any size to suit for supporting potted plants. At 100% scale it measures approximately 273x197x4 mm My wife requested I design this for her as the store bought ones either rot out quickly or are too…
Update 01-18-23 Wide faceplate added! Update 01-17-23 I rebuilt the model from the ground up and improved it further. Added the step file for those who wish to make changes. Coming soon: Wide Faceplate version! Update 01-16-23 I replaced…
Here is a short demo of the street glider https://vimeo.com/659992058 Note: You will need a printer with at least a print area of 290mm x 280mm in X and Y. This is the bare minimum size. Perhaps I will design some split models in the…
***Update Jan 23, 2024*** Added horns to mount Beacon Rev H ***Update 09/26/23*** Revised bottom horns cleaned up the model slightly This is my mod of the EVA3 mount for orbiter2 and rapido, to add support for a Beacon and ebb42…
This is a replacement landing gear (skid) for the SAB Goblin Fireball 280 rc helicopter The photo shows the actual skid next to the 3d printed replacement skid Sorry for the large file size, but I found problems with the print when…
See original model for more detail. This is an alpha untested design (although the original is fully tested). Be sure to print the models in the orientation as I have saved them in. I include the step file for those who wish to make…
***Update June 9 2025*** Revised front print to add hole for bolts that hold belt. It did not pass all the way through the top. rev A ***Update November 28, 2024*** Fixed actuator added to parts. To use this actuator you will have to…
There is a version for the V1 version of this toohead found here: https://www.printables.com/model/1088377-ratrig-toolhead-v1-with-filament-cutter There is also a version for the v3.1 toolhead v1 upgrade found here:…
***Update March 8, 2026 Revised error in rome.txt file. The hotend section was misplaced and now corrected by moving it ahead of the ROME section to prevent any hotend distances defined in the ROME section from potentially being…
* Update 1/22/22 * Added a stretched version of the fs_buddy design so stubby antenna can fit on the sharkbyte vrx and not interfere. * Update 1/17/22 * Added file fs_buddyfor04xwcap. This file is the fan cap, with an fs buddy attached to…
***Update January 16 2025 Revised “Back” STL file to improve the tie wrap holes at the bottom to secure the beacon cable. The holes are larger and more robust. ***Update January, 15 2025 Revised "Back" STL file to improve thin wall issues…
This is an earring stand I designed for my wife. I provide a .8mm support box for the cross brace, so it's best to print with .4mm extrusion width. Add supports between the cross brace and the support box. I found this prints better than…
This is a 100mm diameter drink coaster which is intended for 2 or 3 color printing only. Update 27-4-23: Added model with .6mm thick white bottom for easier printing. Update 10-8-25 Added three color Jets logo for 2025 First two layers…
* Update 8-25-22 * Added manifold and hose adapter for 4" hose and 120mm fan * Update 11-3-21 * Added Level foot spacer for original leveling feet * Update 9-16-21 * Added note about vibration from fan * Update 7-4-21 * Added gasket (TPU)…
This is an inline filament sensor you can use on any 3d printer. This was modified from a Helge Keck design for ROME Print the model as set in the model file. Use supports for the bottom hole only. use 4 perimeters and print the threaded…
Here is my ROME setup (for more information on Helge Keck's ROME see https://github.com/HelgeKeck/rome ) for my VCORE3 500 printer. Some of these are remixed versions of Helge's designs and some are original. This is a fully tested setup…
On my Vcore3 500 the cable support on my eva3 hotend broke after only a couple dozen hours. It is a weak design because it has to make room for the 4028 fan or the dual 5015 fans that run perpendicular to the back plate in the stock EVA3…
This is a dual exhaust wall mounted fitting for 2.5" duct from McMaster-Carr. (Automobile exhaust duct). McMaster-Carr p/n 5398K12 or similar od/id and style. I have a triple exhaust system here:…
Update: Nov 9, 2024; I have added a UL listed version of the switch now linked below. The original model is for a version of switch that was slightly smaller and had only a CE rating. I have left the older version in place for those with…
This is a simple device that clips onto a filament reel and holds the end of the filament in place. There are currently different files for 1Kg Makerbot PLA, ABS and Matterhacker ABS and PLA style reels. There will be more styles in the…
This is the winglet, and a hook for bungee launching, for the TBS Caipirinha 2. The winglets are an exact replica of the coroplast winglets in the kit, but with sealed edges and more strength. They only weigh 5 grams more than the…
You can purchase press on knobs for socket cap screws but they don't have a very good grip. I needed one for 5mm socket cap screws that I could apply more torque with. They have star shaped knobs that are much better in that regard, but…
This is a cockpit frame I developed for Dynam's ME262 twin 70mm edf jet. I wanted an FPV experience to simulate sitting in the cockpit. But the canopy that comes with the kit is just painted clear plastic and trying to look through that…
***Update June 9, 2025*** I revised the side mirror and added a mirror back print to allow a thin printed plate (mirror_back) to be adhered to the side mirror recess, with the stick on mirror “glass” pre-attached. This way the mirror will…
***Update 11/8/24*** I have added a file for the vcore4 electronics enclosure to mount the raspberry pi with the geeekpi fan. Print two of these mounts. You'll also need 4x 3mm heat sets, 2x 2.5mm heat sets, and 2x 2.5x16 and 2x 2.5x8…
This is a suction cup mounted sponge holder or scrub brush holder. I include a step file of the design if you wish to modify it. You can try to print the suction cup, but I'm not sure it would work very well. It is included so you know…
These are scanned from an old set (circa 1930's) of hand carved classic wooden chess pieces. They were scanned on a David SLS-2 system using David 4 software. When you slice these in your software, be sure to lower the base of the pieces…
The enc2 bowden clamp extended is extended out from the enclosure for better alignment with the filament spool. It uses a 5mmx 50 bolt and 5mm 3030 tnut for mounting. The enc2 spoolholder 3mm mod gives more space from the hardware on the…
This is a removable build bed design that you can make as an upgrade for your Taz 4, Taz 5 or Taz 6. It is comprised of a precision machined, level adjustable, ultra lightweight aluminum tray with magnets and separate square glass bed…
Update: 1-24-23 Oops I forgot to include the step file, and it has been added to the file listing. This is a shoe mount (like the ones found on top of a still camera for a flash or other accessories) for the HDZero Goggles. It consists of…
The tail is a remix of the impossible tilt. I have revised it to fit the Tricopter LR better. I also strengthened the servo holder. This design uses 3mm IDx6mm ODx2.5mm deep ball bearings (2) in the back mount to reduce friction to a…
This is an exhaust fitting I developed for my Lulzbot Taz 4 or 5 printer enclosure, but it could be used for any kind of exhaust needs. (see thing: http://www.thingiverse.com/thing:746922 ) It is designed to mount to a 50x50mm dc fan, and…
I designed this prop guard for my QAV-PIKO 2" quad. It weighs about 3.25 grams each. I provide 4 mounting holes for 2mm screws at 9mm diagonal spacing, but only 2 screws are required to hold it well. * Update 12/7/2018 * Added a larger…
This is a prescription lens mount for the Fatshark HDO2. If the focus power adjustment in the goggles is not enough to help you see a clear image, you are like me and need special prescription lenses to see clearly. Such as those with…
I don't like Coroplast for wing fins so I decided to print mine. I used ABS on a 100 degree c bed with PEI covered with glue stick. An easy way out would be to use PETG. PLA is not great long term in sunlight. If you're having trouble…
Print two universal arms and one crossbar to match your printer size. The 500 crossbar includes a 5mm diameter hole through the length to allow for a 5mm dia carbon fiber rod to add rigidity. The universal arms are mounted to the inboard…
Inside the electronics enclosure of the vcore4, one wire track is replaced by this print, in order to mount this linked power regulator: https://www.amazon.com/Converter-1-25-36V-Voltage-Regulator-Display/dp/B085T73CSD This mounts in the…
See https://www.printables.com/model/356611-double-exhaust-fitting-wall-mount-with-valves for original design This is a remix of my own design. This print allows you to connect 3 printers to one exhaust outlet (wall mounted). I use a…
This is a battery box and cover for a Multistar 6sx5200mah 10C lipo. I developed this box for the Firefly6 but it could be used for just about anything using this lipo. Unfortunately the box will stick out above the wing of the Firefly6…
This is a remix of LumberjackEngineering's servo deployed Nozzle wiper. With an enclosure on the vcore3 I couldn't fit the servo deployed nozzle wiper for 3030 extrusion anywhere without having interference with the bed, extruder assembly…
I designed an eyeglass holder and it turned into some sort of modern art monstrosity that some people like. I think it's the ugliest thing I've ever seen, which is a positive, since you can't possibly forget you put your glasses on it,…
These are towhooks large and small for launching model aircraft on a bungee launcher. I use the small one for smaller wings such as a Pinata or the Caipi (about 1kg AUW) I use the large one for my Chimera. (2-4KG AUW) They are designed to…
This is a partial remix but Thingiverse is not working with remixes currently so I will simply give credit here in the summary. It is partially based off of this model: https://www.thingiverse.com/thing:2334291 I will also message the…
I grew tired of tie wraps breaking on even a slightly bounced landing with my rcexplorer tricopter. So I developed these flex legs for the tricopter. They will work with any 10mm square tube so these legs are not limited to the tricopter,…
This is a flexible filament guide for a Taz printer (mine is a Taz 5) using pulleys instead of the typical guide tube. I have found the tube creates too much friction with some soft filaments and this can lead to under extrusion. The…
This is the sister product to my other exhaust fitting. http://www.thingiverse.com/thing:749036 Also see the enclosure this was designed for: http://www.thingiverse.com/thing:746922 It is meant as a means to mount the exhaust tube to a…
This thing was inspired by the Lulzbot Taz Enclosure by MrMcGuire. I've attached a dxf file of the panel details of my enclosure make, so you may have them laser cut, or you can use it as a guide to cut them yourself.* Please note the dxf…
The tie downs used to hold the lid down are too short and prevents the lid base from installing properly. This tie down is 2mm longer in the base to correct the issue. Category: 3D Printer Parts
On my VCORE3 500, the stock Ymax endstop did not allow me to place Y=500mm far enough back into the printer and this meant I couldn't print on the bed at any dimension under Y=7mm (instead of Y=0!). The stock Ymax endstop was too big.…
This is a shelf I use for holding my receiver and/or related video components on my ground station for FPV, although it could be used for anything. It is designed specifically for a Sony Tripod but I would imagine it would fit many…
This is a fitting with bolt on hook designed for those telescopic rods they sell (typically for reaching lightbulbs in your ceiling). The fitting has an internal thread that is 18.4mm OD and 16mm minimum diameter with a pitch of 4.9mm.…
This version splits the mount into a base and cover. The base is glued with goop to the mini drak after cutting off the nose. The cover screws to the base with 3x m2.5 screws (about 10-12mm long is plenty. The hex nuts are captured in the…
Just finished installing 12mm rods on my Taz 5 X-Axis. I believe they are incorporating 12mm rods on the Taz 6 (although differently than I did it). The reason to increase to 12mm rods is to reduce the sag that occurs (worst at the center…
This is a mount for the Mini Talon and the Runcam 3. A Gopro Session will fit as well but will need a 1mm spacer behind the camera to keep it full forward in the mount. The mount mates up with the foam fuse perfectly, due to the design…
* Update 1/17/22 * This case also works with this DIY headtracker found here: https://www.rcgroups.com/forums/showthread.php?3822641-FPV-Head-Tracker-Single-board-wireless-easy * Update 2/19/21 * Added DYS headtracker case for FSBUDDY.…
This is a remix of a remix. This is an alternative tail design for the Mini FPV Tricopter, remixed off of the Alternative Tail for Tricopter. This design uses the BMS 22HV digital servo. It has all metal gears, high torque, is very fast…
* Update 10-5-2018 * Added eagle2 model with 18mm lens opening for larger lenses * Update 10-3-2018 * Added file velcro 1piece version for runcam eagle2 and runcam 3 * Update 11-17-2018 * Added 1 piece for rc3 and eagle2 pro * Update…
This is a tool meant to mount on the tail motor shaft of a tricopter. It's designed for a 5mm x 11mm long shaft and the Wixey digital angle gauge WR300. The basic premise is it is used for calibration the tail servo position in Triflight…
The QAV Piko 2" micro frame is great, except the method employed to hold the battery. A rubber band is used and wrapped around the battery and engages two "ears" on the frame. Removing and replacing the battery was an exercise in…
This is a lightweight cockpit you can print for the Nano Skyhunter to easily provide mounting for the Nerdcam3d MK1 or MK2 and your video transmitter. It prints in two pieces, either the mk1 file or the mk2 file and the lip file. Use CA…
This is a handle that can be bolted to each side of my Lulzbot enclosure for Taz 4 or 5 (found here: http://www.thingiverse.com/thing:746922 ) for easy lifting and moving. Instructions I used 2 shells, 4 layers top and bottom, 40% infill…
If you need one in the USA contact me by pm at FPVlabs. I use the same user name over there. We all hate using Velcro for attaching the Mobius to our TBS Gemini racer. For one, the Velcro doesn't stick well to the Mobius. Secondly the…
Well after about 10 flights with my Gemini racer the stock board camera died. I had a DX-201 on the shelf and since it is such an awesome camera I thought I would design a mount for it to fit in the Gemini. It was quite a challenge but I…
This is a protective cover, and case along with a pivot mount for the Nerdcam3D MK2. I have it mounted on my rcexplorer tricopter. Awesome camera and tricopter! Enjoy * Update * Added file nerdcam3d-mk2_cover_mobius which is a cover with…
This is a mount I designed to put a Nerdcam3D onto a Cinetank MK2. All you need is this print and the mounting hardware supplied with the Cinetank to mount it to the stock hole locations on the forward top of the Cinetank MK2 upper plate.…
Ok one thing that can be a little tricky is getting the Gemini in a perfect orientation to set level. This is due to no flat surfaces, except for the small area under the motors on the CF "legs". I have just completed my design of the 3D…
This part provides a firm base to press against to more easily activate the injector pen while also maintaining a 90 degree angle to the site. Be sure to properly sterilize the part for each use.
This is a camera mount for a Runcam3 (or session) and 1177 or Arrow (or similar) cameras for the Ritewing Z3. This is a fairly old plane but I've had the kit for years and finally got around to finish building it. So I needed a mount for…
See video of repeating servo test of the prototype of this design here: https://vimeo.com/947163639?share=copy The USS Nautilus SSN-571 submarine model created by Liebe Grüsse Marc of cgtrader is outstanding. However the model does not…
These are all currently available results.
