Counting matching models…
Its a battery holder. Made by fafabienman from https://www.thingiverse.com/thing:3358129 I did not make the model I'm just show casing it. Print instructions I printed this in 0.3 layer height and no supports did a good job and pretty…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
Designed with a spring-loaded snap mechanism , it allows quick access while keeping cables securely in place. Function The mount features 5 slots , each suitable for cables up to Ø7 mm . To open the mount: Press the textured side outward…
Sonos Beam Mount for Apple Studio Display (height-adjustable stand) A one-piece bracket that hooks into the cable slot of the Apple Studio Display's tilt- and height-adjustable stand and holds a Sonos Beam (Gen 1) right below the display.…
Magnetic Case for Synaptics Coralboard SL A compact magnetic enclosure designed for the Synaptics Coralboard SL development board. The enclosure provides quick access to the board while maintaining access to essential development…
Overview A compact desktop housing for the common 16 mm, M12x1 thread momentary push button (the red-cap style). The base snaps on without screws, a hidden magnet holds it to steel surfaces, and the cable enters at an upward angle to keep…
Designed for M3 countersunk screws, and designed to flush-mount an Anderson SB50 plug.
The motor cover and stator are secured to the motor using the original screws that come with the motor. Motor is a Samsung DE31-00029H. You can also use a DE31-00029K or DE31-00029J or any other 29 motor. Solenoid is a JF-0826. I use the…
This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…
A simple cylinder to avoid accidentally turning knobs on the USB Audio interface.
Modified the original design to fit a 5V 30AMP relay. I have modified the dimentions to fit a 5V 30Amp relay that I had to use in a project.. Amazon link (no affiliation) - https://www.amazon.com/gp/product/B07DSZFLMQ Relay Dimentions:…
A small and extremely portable Pinecil case that suits my needs. Has space for: 1 Pinecil soldering iron 7 Soldering iron tips 1 Solder spool 1 608 bearing hot iron stand Most heat set insert tips. Iron stand assembly: insert a 608…
Wall mount for Kaisi K-2208 Paste Extruder Uses command strips on the back for mounting.
Printer: Ultimaker S3E Filament: Extrudr glowEx PETG Layerhight: 0,2 Infill: 100%
Adapter for 5015 5V fan to round pipe. Sized for 10mm ID PVC piping. Epoxy or glue in place Decrease layer height for better quality. Print nozzle facing down to eliminate support requirements.
I'd like to share my deshroud mod for the ASUS GeForce RTX 3070 DUAL graphics card. It holds two 120mm fans (120x120x25) with standard mounting holes. I printed it with a wall count of 3 and 40% cubic infill. It may not look very stable,…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare Connector Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Sensor mount for Sonoff SNZB-02P Outdoor housing: https://www.printables.com/model/1014449-outdoor-sensor-housing BOM 1x M4 threaded insert (https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m4-standard-50-stk-pcs) 1x M10…
As Aqara U200 doesn't have 10mm diameter adapter, and especially for my EVVA 4KS deadbolt with hole for retainer - I had to model it by myself. Made few iterations before to gain perfect for my purposes. * By the way, it should also fit…
Build a professional protective housing for your Raspberry Pi 5 with the official Raspberry Pi M.2 HAT+. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry…
Build a professional protective housing for your Raspberry Pi 5 with Pimoroni NVME Duo integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare PCIe to M.2 Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare PoE HAT integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
3D recreation of the Wisconsin Electric Machines and Power Electronics Consortium (WEMPEC) logo: wempec.wisc.edu I used an air compressor nozzle and braided fishing line to pull the LED Filament and wire(s) through the hollow channels.…
#1 Casing dedicated for Flip-disc Binary Clock. The project files for self-modification can be found below. The Binary Clock can be found on Kickstarter Project Repository Tip: When printing, it is best to add a brim due to the…
#2 Casing dedicated for Flip-disc Binary Clock. The project files for self-modification can be found below. The Binary Clock can be found on Kickstarter Project Repository Tip: When printing, it is best to add a brim due to the…
components: 1) 4xM2 2) https://vi.aliexpress.com/item/4000559875991.html 3) https://vi.aliexpress.com/item/4000194710902.html 4) https://vi.aliexpress.com/item/1005001861065786.html 5) https://vi.aliexpress.com/item/1005001412953443.html…
#3 Casing dedicated for Flip-disc Binary Clock. The project files for self-modification can be found below. The Binary Clock can be found on Kickstarter Project Repository Tip: When printing, it is best to add a brim due to the…
This is a model I made for a physics assessment for school, and thought I would upload it for other makers. I apologise if the instructions aren't clear as I haven't designed it around being constructed by others, but I will try my best…
Electrical safety warning: Messing with electrics is dangerous and carries risk of death. Please don't attempt to use this electrical box if you are not familiar with electric safety procedures and regulations in force in your country.…
My Baofeng UV-5R knob recently broke, so I decided to make a new one that is more ergonomic and durable. The new version has ribbed surface for better grip, better markings (that could be filled with colored enamel paint ;) ) and far more…
This is a high-precision CAD model of a full metal stainless steel push button designed for use in electronics, specifically for 230V applications. The model is accurately scaled to match the real-world dimensions of a standard push…
Ever wanted your iPod mini to be USB-C? Fret not! This case lets you do that without modifying the iPod in any way. You just need an old 30 pin cable and a USB-C female port (like this one for example:…
This is a replacement 1.7Ghz LNB housing that will fit older 2.4Ghz Wifi Grid Antennas. I used this to receive GOES-16 weather satellites on L Band (1.7Ghz). The dimensions of the copper wires are approximate but its tuned to 1.7Ghz using…
The case is for jufy111's 18650 holder. Here's the link: https://www.printables.com/model/999328-18650-battery-holder-case/files I designed it with snap off supports so that it can be printed diagonally for most stability. I do recommend…
Official Enclosure for the Growmax Garden Automation Board by OpenSensor.io This is the official enclosure for the Growmax garden automation board sold by OpenSensor.io. I print and include this model with the kits I sell, but I'm also…
Housing for the ZERO-DISP-7A touchscreen from Waveshare I tried to make it as compact as possible and to keep it as simple as possible. Total height is about 25mm Recesses for display control buttons on the side. There are 2 slotted holes…
Just a small case for the Case for Hailege USB zu RS485 TTL Serial Converter Adapter FT232RL 75176 https://www.amazon.de/dp/B07Z1V5WQS
Some knobs for 6mm D-shaped pots. You can print it and use a marker to paint the indicator line, print with a small inlay piece, print it in Multicolor, or use a small string of filament for the indicator. Use CA-glue to mount the parts.…
I don't like to use glue as the original design intended so I've added holes to secure by screw. I also made its blade holder longer as that's what I have, and a different version that have a bend for wire to exit perpendicular to fuse,…
A nice cloud to put in your child's room to monitor the air quality discreetly (CO2, humidity, temperature,...). To put on the bedside table or hang on the wall. Another variant is available here :…
Box for Arduino Nano, Display and sensors. It wont likely fit your components as I made it for my needs but wanted to share it anyway. You are free to remix it as much as you wish. (Yes I know DHT22 can measure temp and humidity so the…
very swag tiny carnival if you down load you can add ur own motors or whatever you want. You can use it for figure photography.
EN I designed this sliding cover so that the lights of the Vodafone ConnectBox (Compal CH7465) don't disturb my sleep. Preferably in dark filament so that no light gets through. When attaching it, press it down evenly so that no layer can…
This design is based on the work by DaveM . I created a new design for the case that is heavily inspired by Dave's design but tailored to my tastes. The screws for the faceplate are now hidden and the case is more minimalistic. Photos…
4x m3x8mm (or 6mm) screws are used. The screws go directly into the plastic (modelled as 2.9mm holes). FreeCAD and Step files are available if anyone wants to modify it, e.g. add heat-set inserts. Stand consists of two feet, so print file…
quand la HC3 est dans la baie de brassage les ondes ne passe plus à cause de la structure métallique j'ai donc fabriqué un support pour la fixer sous la baie de brassage , avec un gabarit de pressage des trous il faut 4 vis de 3x8
i made this button as a part of a larger project, it uses a standard cherry-mx style key and a 45mm outer diameter RGB ring (model is parametric so this can be modified). This button serves as an attractive option for important…
I have designed a custom enclosure for the WZ3605E module. The enclosure offers two power input options on the back: a DC 5.5x2.5mm jack or a USB Type-C port. The USB Type-C power delivery is managed by the PDC004 trigger module, ensuring…
This can hold an adafruit feather or featherwing neatly on top of the stacking headers to make it easier to solder.
This is a simple case designed for an ESP8266 IR transmitter and receiver circuit (ESP_IR_TR_WIFI) that I bought from AliExpress. I designed the case to accept M3x5x4 threaded heat inserts and M3x10 countersunk screws. The USB is only for…
It's a simple case for the Flipper Zero 3-in-1 Expansion Board Parts needed to build one 4x M3x10mm Screws
This case fits a Raspberry Pi Pico, a sensor and 3 AAA Batteries The sensor is a AHT20 / BMP280 combo with digital temperature, humidity and air pressure. It suppors the I2C interface so reading values with the Pi Pico ist easy. Some…
This terminal block is designed to offer flexibility and convenience for various electronic projects. While the spacing between terminals is fixed, the number of terminals is customizable, with a maximum of 10 terminals per block. It can…
The mounting brackets have 5mm holes for screws. The tenda switch has the following dimensions: - Width: 101 mm - Length: 100 mm - Height: 26,5 mm Happy printing and mounting :)
This holder fits nicely into a solder tip stand such as Aliexpress item 1005001861509937. Prints without supports and should do the job.
About I am sharing with you my project of another guy ring for www.DX-WIRE.de 10m heavy-duty 2013 mast. There are various *.3mf files available for diameters as measured on the mast I got from dx-wire, I hope they are consistent among the…
Note that this model requires supports. print with the diamonds facing down and the holes for the batteries facing up. Once support material is removed there should be adequate space for nickel strips to be welded (in theory)
Elko plate holder for SmatThings. The button still works when it is in place
Seagate GoFlex brand backup drive has a removable USB 3.0 base that can be used as a USB to SATA connector. For years I've used the USB for years to copy data from old drives or clone a system by carefully connecting everything hoping not…
This is a soldering jig for helping align things like header pins on circuitboards that follow the 0.1 inch breadboard convention. The jig has 50 x 50 holes.
I bought a stairway lighting controller (RL-Step-02) which came with the LRS-100-24 power supply. The model for the RL-Step-02 controller I've uploaded here:…
Hold a 6-pin needle connector with this model. The dimensions are for one of our PCBs, but the OnShape model here is parametric so it is can be changed for other PCBs.
Made this when I wanted to mount a wAP and a wireless wire point together with a QMP wall mount but without any zip-tie or similar. Also added both the wAP base and the QMP connection block separately for easy use in other models.
The stairway lighting controller RL-Step-02 I found on Amazon to illuminate step by step the stairs. That looks very good - but it is delivered of course with a lot of cables and with a not very nice power supply with additionally…
Bottom case for the DROK 200407 12V to 5V DC USB Buck Converter Dual USB Port Fast Charger Board with an integrated Synta/Vixen-style finder dovetail for mounting on a telescope. Reuse the hardware and top case that came with the product.…
https://learn.adafruit.com/ch32v203-eink-epaper-calendar-and-clock You will want to add supports for the display cutout.
Screw trays, stackable with 6 or 8 compartments. Handy for electronics disassembly
This support is designed for the edgeless aluminium LED profile. These profiles were only shipped with 2 supports per piece, so they wouldn't be enough if I had to cut them (the profiles). Not finding them available to buy separately, I…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Can be printed in whatever material you want. Bronze filament with light coat of blue/grey stain is looking good… The versions in the pictures is printed in eSUN ePLA Metal Antique Brass
Deutsch: Kleines Gehäuse um ein Shelly mini gen 3 als schaltbare Kabelverlängerung zu nutzen. Vorsicht Hochspannung, 230 V = Lebensgefahr! English: Small case to use a shelly mini gen 3 as a switchable cable extension. Caution, 230 V =…
The full instructions on creating a hidden AI camera with Raspberry Pi: Find 3D-Printed RC cars here.
This is an enclosure for the WT32-ETH01 featuring a Type-C connector, with options for including or excluding a POE splitter. links to the module: POE Splitter 48V To 5V Or This Type C Connector WT32-ETH01 Or This I was searching for a…
AnkerMag Go and Apple MagSafe Currently Supported This is a print in place stand based on my recent designs , the purpose of this version is a travel friendly version. Print Profile I recommend using ABS,PETG or ASA, PLA can deform from…
Breakout box for four DMX signal lanes from Cat-cable. This box is specifically designed for DMX (no shielding, only outputs) with 3 pin and 5 pin per signal lane. All locking hinges are flat to housing outlines. For assembly you need 8…
This is a simple single piece case for an LM2596 DC - DC buck converter. There are several versions of this module but this case is specifically for the version pictured below. It has two mounting holes, a voltage adjustment…
Modified the battery adapter from @Simon_220817 to have better contact of plus pole. Moved the battery 1mm to the front.
This is a longer Version from Josillos Arduino Nano USB Type C mini box This Version is about 2cm longer than the original, to add a small sensor or a few centimeters of extra cable. No glue required. Cover snaps in the box
Wireless Charger Stand. Galaxy PETG, 20% infill. Enjoy.
Enclosure for a Sonoff NSPanel Pro 120 . Couldnt find one online so i made one in fusion . Used some heat inserts for the plate mounting
So today a part which holds the tensioning thing on my Samson SR850s has decided to snap. After 5 years it's understandable I guess. Print instructions: Low layer height, like 0.2 or 0.1 mm (because of in-design supports) 0.4 nozzle…
Charged batteries have the positive pole facing up, empty batteries have the negative pole facing up. With this you can know the state of the each battery.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Here is a link to the github repo => https://github.com/Aesir1/Quack_Quack_Watch
Aqara mount models from @volan are not suitable for screw mounting which is necessary for some wall types. When I tried to use hole in original base for screw, it break off very easily when adjusting the sensor. This is simple remix of…
This is a complete case for the Wantmoore.tech LEDeez v2.0 pixel controller. The lid is a friction fit design. It's relatively thin - so should print with “all walls/top shell/bottom shell" and be plenty strong. .2mm layer height 4 wall…
This is slim compact case for a ST7789 I2C 1.54" TFT Display Screen. The case was designed based on the measurements of this model I ordered from AliExpress. As with the other slim cases I've created the model's clearances are very tight…
Small part printed solid for strength. Use PETG or ABS, pla is not recommended
Here is a 3D printed base for three MB-102 type breadboards (from Aliexpress). I designed it using Tinkercad. Print the base, face down. It measures approx. 20 x 18cm and can take about 15 hours with 15% infill at 0.2mm resolution if…
For assembly, you will need an M5 x 90 DIN 912 screw with a full thread and a cable lug with a diameter of 3.9-4 mm (cable lug for a wire with an area of 6 mm2) or M4х16 DIN 912 screw with nut.
