Counting matching models…
This model is a simple but super satisfying upgrade for the printer: it covers the heatbed cable entry and, at the same time, works as a dedicated holder/guide for the accelerometer cable . The result is exactly what I wanted: the…
This is a 3D printing speed test. It consists of two 3D models, optimized for testing speed and acceleration of the perimeters and the infill respectively. You can use these to tweak your speed and acceleration settings and look for…
I was frustrated by the need to re-attach the screws to the standard Creality bracket whenever I need to run input shaping with my Sonic Pad. So I created a version which simply slots in (firmly) to a semi-permanent bracket on the…
A simple test tower for tuning acceleration and jerk/junction deviation. Fully customisable with the source file: https://cad.onshape.com/documents/1afa1c55109b3ef715f6a6c1/w/23d23b4f073e5e6749fc66f2/e/18cceba522813632f4ef37ec Companion…
Snuff box with build in catapult. New Version with a dent, for a more easy lever movement (only visible on the renderings, not the real photos). I prited it in PLA with a 0.35mm nozzle, 0.20mm layer height and a honeycomb infill of 0,20.…
As a follow-up on my temperature-tower for Bambu Studio, I created this Acceleration-tower . (and also a speed-tower ). Its width is designed to fit in a 1x2 gridfinity basket. The general presets work, but I want to explore the effects…
Intro: These are adapters to mount the Simagic P-HPR (Haptic Pedals Reactor) for the Heusinkveld Sprint Pedals . All 3 pedals (clutch, brake, accelerator) are included. Models: You will notice that there are 2 models per pedal, labeled…
In order to use the Klipper firm through the Sonic Pad on the Creality Ender-3 V3 SE printer and the vibration sensor for vibration compensation, you need parts to connect the sensor. This data is a guide case file for connecting a…
Bracket for securing the ADXL345 accelerometer to a V6 nozzle. Available in both heat-set insert and thread tapping types. Required: One M3x10 screw and two M3 screws of appropriate length to secure the accelerometer.
Print the mesh flat and then use heat (heatgun/hairdryer) to carefully wrap it around your wrist. I have posted 2 sizes of mesh depending on how big your wrists are. The rune stone fits into both. I painted mine with acrylic paint AFTER…
The original Ender 5 S1 fan guard is made of metal and weighs appx 50g. Replace it with a lightweight 3D printed version that has a provision to mount the accelerometer from the Sonic Pad for input shaper tuning. You can see the install…
The Input Shaper functionality on your Original Prusa MK4/S, MK3.9/S or MK3.5/S can be calibrated using an optional accelerometer . You can find more information about the accelerometer here . Print instructions Download the latest…
Modeled for Ender-3 S1 Pro using right-hand stock fan mounts. Reuses stock short M3 from shroud to mount the sensor, mated with a M3 x 4mm brass insert. Requires M3 x 8mm, possibly 6mm, to replace the repurposed shroud screws. Amazon US…
Holder for the full Starbond 3 pack variety kit. Has places to store all the accessories that come with it. Added a slot for a glue dish, you can put masking tape over it to make it reuseable. Made with OnShape. Edit here . Support: You…
Hi, I made brackets to test my Sovol SV06 Plus with Portable Input Shaper from FYSETC. This specific one is slightly easier to use - requires only USB-C and flashing firmware to it. There were no brackets available for SV06, so I decided…
A Prusa gyorsulásmérő doboz könnyen nyomtatható. A fedél kétféleképpen készíthető, felirattal vagy anélkül.
…Please be sure to hit like & post a make, I'd love to see your prints! Here's my over engineered Y Axis captive mount for the Fysetc Portable Input Shaper ADXL345 USB C Accelerometer bed mount. It's designed for ANY PRINTER with a PEI…
To use an ADXL345 (possibly similar), and a Raspberry Pi Pico as an input shaper for Klipper systems as a secondary MCU. Programming settings, and wiring were pulled from NERO 3D and the following video:…
Acceleration speed of 6 stages are configurable in slicer. Default configured values, update it as you wish: Perimeters Extermal perimeters 30 19 35 21 40 23 45 25 50 27 55 29 Use any filament, i personally use Prusament PETG glossy black…
This project uses IR sensors to detect when a ball is near then triggers a relay switch to the external power source letting current through the wire which pulls the ball away from the sensor and to the next magnet. No programming at all.
Model Yazıcının X ve Y eksenlerinin acceleration testinin yapılmasını hedefler. 400mm/sn² ivme ile başlar 1400mm/sn² ivmeye kadar çıkar. Vazo modunda ve 0.2 katman yüksekliğinde basılır. NOT: Test esnasında makinenizin başından…
I found that the STL's Creality provided for mounting the accelerometer packaged with their Creality Sonic Pad would not work with a Micro Swiss NG so created one. With very little area on the NG for a mount to work, I chose to utilize…
This is a simple mount to attach the KUSBA USB accelerometer to a 3d printer bed up to 7 mm thick. All you need is a few M3 screws and one nut. Check out my universal hot-end mount
Mount your Kusba ADXL345 USB accelerometer quickly on probably any toolhead directly to your nozzle to get most accurate readings BOM (I used for my build) M3 20mm x 2 M3 6mm x 2 standard 5mm Threaded Heat Set Inserts x 4 Please let me…
Magnetic Mount for ADXL345 Accelerometer This design is a detachable mount for an ADXL345 accelerometer to be used with Klipper 3D printer software for measuring resonance for its Resonance Compensation (aka Input Shaper) feature. The…
Print with PLA on a flat side without supports, so it looks like an L from above. Use M3 or similar screws to mount the accelerometer to the part and itself to the extruder (check picture 1)
Since the PRUSA Accelerometer does not have to be permanently connected to the printer and recalibration the Input Shaper is only necessary if modifications are made to the printer, I looked for a way to store the accelerometer safely.…
I’m excited to share my latest project: a custom case for storing the original Prusa accelerometer , specifically designed for the MK4 and MK4S 3D printers. The case is made up of two parts. The inner section is my own design, created to…
This is a simple remix of a remix - because I love heatset inserts. Credit to Anatoly Kharkov for the ingenious dual purpose clip/mount design: Fits both the X and Y axes for the Ender-3 V3 SE The clip is a nice secure fit on the bed Easy…
The inner part of the case is my own design, and you can find it in the description. This is just the outer box!!!
Designed for Ender 3 V3 SE but will fit any 42mm stepper motor with threads. Use 2x M3x6 for the stepper holes, 2x M3x8 for the sensor (both brackets). Use a binder clip for the bed mount.
This mount can be used either on the printer head (with screws) or mounted on printer bed (with binders) There are 2 models - one for regular nuts and one for heat insert nuts. heat insert nuts dimensions - M3, outer diameter - 4.2mm,…
does not need supports. but takes forever to print
Hi, I made brackets to test my Sovol SV06 Plus with standard ADXL345 chip, altered from my other PIS ADXL345 input shaper, so photos are visible there for now. All holes are measured for self tapping, no need for heated thread inserts.…
This is a simple mount to attach the KUSBA Usb accelerometer to almost any 3d printer. All you need is a few M3 screws. Please note that this is only used to run input shaping and then should be taken off so that your heatsink gets proper…
Update 2024.06.19: Added a variant that can fit several models of accelerometer: BTT S2DW 1.0 (tested) BTT ADXL345 v2.0 (tested) Mellow Fly-ADXL345-USB (untested; should be OK in REV6) GY-291 / SparkFun ADXL345 (SPI) (tested) GY-521…
I made these 3D models to facilitate the attachment of the ADXL345 USB accelerometer to both the head and bed of the Anycubic Kobra 2 Neo. These models serve as effective solutions for integrating the accelerometer, in order to measure…
This is an adapter for the BTT's S2DW accelerometer - https://biqu.equipment/products/adxl-345-accelerometer-board-for-36-stepper-motors?variant=40446852759650 It allows you to mount it more rigidly rather than using provided soft washers…
FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄 --- Handle for the Gulfcoast-Robotics.com "Y Carriage" Y-axis tray holder…
Wanted to not have to take my bltouch off to take resonance measurements on my Sermoon D1 with Sonic Pad for Klipper. Let me know if you have any trouble but mine seems to be working well but made a few adjustments based on that. 11/6/22,…
These are the handles for the MELLOW FLY ADXL345 (affiliate link) . Two for mounting on the extruder to measure the X axis, The v2 version for vertical mounting, the v3 version for horizontal mounting. The third for mounting on the bed to…
Remix of the Neptune 4 (Pro) bed plate aligner by @true_2030893 supporting the standard ADXL345 accelerometer.
Mounts for Sv07/+ accelerometer to make changing its location easier and faster. Tips and info Both mounts use the same locations and orientations as they would without the box. would recommend printing the “BOTH” file and printing the…
Really quick simple design for mounting the ADXL345 Accelerometer to my Eryone Thinker Series printer for tuning with Klipper. Require 2 x M3 6mm, 2 x M3 8mm (for bed mount) & 2 x M3 16mm or equivalent for head mount. Print Settings…
ADXL345 Accelerometer mount designed to fit on the James Tongue mount on the RailCore 300ZL. This accelerometer is used for the Input Shaper testing process for Klipper (and potentially other firmware such as RRF and Marlin).
Honeycomb Storage Wall - CA Glue & Accelerator Holder. For 2 Oz Zip Kicker aerosol and 1 0z Zap a Gap CA Glue
This replaces the “brace” part of the Dragon Burner toolhead ( https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner ) for the Voron v0.2. You can mount an ADXL345 accelerometer to it for measuring resonances. The brace needs to…
Part list: 12mm metal ball 4 Mosfet Transistors Insulated copper wire 4 infrared emmiter 4 infrared sensors 4 inverter * 5V 2A power supply Some resistors * I used the 74HC02E and connected the two inputs together and therefore converted…
This is a model of a medical linear accelerator based on the “Halcyon” Unit marketed by Varian Medical Systems (Palo Alto, California). Medical linear accelerators are large and highly sophisticated medical devices that emit focused beams…
…Please be sure to hit like & post a make, I'd love to see your prints! Mount Fysetc Portable Input Shaper USB C Accelerometer on your SV06/+ Use 2x M3 heat inserts & 2x M3 5mm bolts for the accelerometer & 8mm M3 bolts for attaching to…
I got fed up with existing tensioners for my printer and made these ones from scratch. You're gonna need four M5 bolts, two for the tensioners and two for mounting the Y tensioner. The required length is anywhere from 1 to 2cm, depending…
I have widened the gutter where the soldered contacts go and i have remove some of the walls that were on the old version which didn't seem to serve a purpose. Layer Height: 0.16 Infill: 80% (I have used this purely for strength as I will…
Allows you to not have to take the CR Touch off to take resonance measurements for Sermoon D1 with Sonic Pad for Klipper. This is a remix of the below two designs. sermoon d1 adxl 345 mount by PA3MA - Thingiverse Sermoon D1 CR-Touch mount…
I used the Gridfinity Generator Fusion360 Add-In (linked below) to create this model. https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&appLang=en&os=Mac
Optimized design of Teaching Tech acceleration test print, for 0.4mm nozzle with minimal line width setting of 0.2mm.
This is a mount to attach ADXL accelerometer to print head without drilling holes in it. You use M3 bolts and heat set nuts to give this mount a way to squeeze grab onto the lip of the existing bracket that holds the z-sensor. Very…
Reoriented Y mount to maintain accel orientation
Designed for ADXL345 accelerometer to be mounted on Prusa MK3 bed sheet (or any bed up to 3.5-4mm thick). You will also need 4pcs M3 hex nuts, 2pcs M3x16 DIN912 screws, and 2pcs M3x12 countersunk (I recommend) screws. The default version…
Purpose Test your printer's maximum acceleration and tune other settings like input shaping and belt tension How to do it Print and gradually increase speed and acceleration as you print, examine for artifacts like ghosting, rounded…
Made this Accelerator pedal for P2000 kit. It might work with other simagic products, but I don't know. **UPDATE 4/4/2025 Integrated M6 threads into the pedal and minor fitting tweaks. Created matching brake or clutch pedals. Easy to…
This is a modified version of the Prusa accelerometer bracket for the Nextruder that works with E3D ObXidian High Flow Prusa Nextruder nozzles (and probably with E3D brass HF nozzles too). For installation and usage, please refer to…
The model should be printed somewhere on the bed where it does not interfere with the homing sequence (for exmaple front-left corner), and oriented as needed. Do not remove from the build plate. Allow the bed to cool down and mount the…
Mounting support for a generic ADXL345 accelerometer. created to be used with the creality official mounting bracket for a CRTouch/BLTouch. The board is secured on heated insterts for easier removal to switch the accelerometer onto the…
This model is a modified version of @Peter_260424 Fan Shroud which gives a bit more clearance for the heater block, adds a cut out for the BLTouch(Though I'm using a CRTouch) cabling and attaches it to the main body to give it more…
Prima che lo shaper di input venisse rilevato fissando l'ADXL sulla superficie di stampa e il risultato non era certamente il migliore, fissandolo bene il risultato è perfetto
I purchased a Creality Sonic Pad for my Ender 5 Pro, but the brackets for the Res.Sensor that Creality has on their web site all require supports... I tried printing one of them, and I tossed it after I 5min of filing down leftover…
Thanks to norfanos and RetroD for creating two mounting options that work great together. So I've mashed them together!
A remix of Paul Phillips' ADXL mount. However, it uses this particular ADXL345 combo unit from Mellow Labs: https://www.aliexpress.com/item/1005005486458306.html Bill Of Materials One Mellow RP2040/ADXL345 module - see AliExpress link…
Liked the model of MisterT, but I wanted to be able to scale it so I can test a large range of values. therefore I removed the changes in shape over the Z axis. X is 1 stripe, Y is 2 stripes
A simple caddy to hold 4 - 1oz Bob Smith Industries (BSI) super glues, 2 - 2oz accelerators, and 4 glue tips.
COMPANION PART: https://www.printables.com/model/342844-ai3m-anycubic-i3-mega-biqu-h2-adxl345-acceleromete https://www.thingiverse.com/thing:5722491 (backup in case its ever not available here) NOTE: I may modify the design to rotate it…
You should need 2x m3x50mm to mount it to the MINI stealthburner. i used M3x8mm to attach the sensor to the Mount. BIG thanks to iano0100 for the original model (especially for the fusion file), witch was for the “normal” stealthburner
I have created this model for my MK4 accelerometer, so it can stay permanently connected and parked in some safe space. The holder consists of two parts connected together and put on the xBuddy box (it fits right into the two holes and…
A remix to support the Bigtreetech ADXL Accelerometer being clamped to the nozzle for more accurate input_shaping As original author mentioned, HOME BEFORE MOUNTING
This mount is designed as a compatible alternative for the Prusa Accelerometer mount. It integrates seamlessly with the Delta-P fan duct modification. As shown in the pictures, this holder is also suitable for measuring the heatbed. Print…
Designed for ender 3 neo. Should work with ender 3 v2 neo, ender 3 max neo, ender 2 pro which have similar hot end. I use a MPU 9150 accelerometer with 15.4mm hole distance. Popular adxl345 boards with a 15mm hole distance should work…
This is a remix of the Rat Rig V-Minion Bed WAGO mount by Squirrelbrain with a mounting option for the KUSBA USB Accelerometer (ADXL345) for Klipper . I recreated it from scratch using measurements from Squirrelbain's STL as accurately as…
I spun up a quick model to colocate my favorite glues: Gorilla Glue Clear (my new favorite general purpose) Loctite gel superglue Loctite liquid superglue (Glue stick, accelerant, or what have you). The focus was the first two items, but…
A very simple bracket for the Neptune 4 Plus to offset the accelerometer when installing the TBStron3D Y axis linear rail kit. The accelerometer will rub against the linear rail and mount creating pressure on the rail and bed bracket. The…
Mount for a Haptic Transducer on the accelerator pedal for SIMSONN Pro pedals
Replacement bushings are sold from many of the E30 companies that I could have bought from, but decided to try this out instead. These bushing typically crumble and leave slop in the pedal. There are youtube videos on how to replace this…
RatRig V-Core 3 ADXL345 Accelerometer Shroud Mount with radioactive cover
Recently upgraded my Ender5pro with a Microswiss NG direct drive hot end, but I needed a way to mount the Creality Sonic Pad resonance sensor to the new hot end. I came up with this mount that bolts to the BLTouch sensor bracket (that…
Just follow the creators instructions.
Video of the project here: No, no, you will not open a black hole and tear the universe apart. Well, hopefully not. We will see. This is an add-on for your bike to collect airborne particles on a microscope glass slide. It's literally a…
Ladies, Gentlemen, and 3D printing enthusiasts of all ages, gather around! We present to you the one, the only, the absolutely unshakeable "Mount for BTT ADXL 345 Accelerometer Board For 36 Stepper Motors"! This mount isn't just any…
The mount gets screwed into the print head by temporarily removing the 2 screws on the right with 2 M3x7mm bolts. The kusba is mounted with 2 M3x6mm bolts. The holes to mount the kusba are designed to be threaded with the bolt as its…
I wanted a holder for my two bottles. I have a 2oz. bottle of the Insta-Cure+, and a 2oz. bottle for the Insta-Set. They are a good combination for bonding PLA parts. Because I have a crowded desk, they get moved around all the time. I…
I recently started changing my printers over to Klipper with Mainsail, and could not find any mounts for the ADXL343 accelerometer like Teaching Tech used in his tutorial videos. So I created some options to share! There is a mount that…
…Please be sure to hit like & post a make, I'd love to see your prints! Mount Fysetc Portable Input Shaper USB C Accelerometer on Biqu H2V2 & H2V2S extruders. We have two mountings solutions for the X axis here. An end motor mount that…
A really simple S2DW/ADXL345 mount for the SV06 toolhead that uses the stock part cooling fan mount holes.
My first upload here, be kind :) I could not find a nice mount for my fly-adxl345 accelerometer as most relied either on the stock print head cover or on the mount points that were covered/taken by custom parts cooling rig. So in like 20…
Adapter to mount an ADXL345 on top of the 100's toolhead. Uses existing holes atop the hotend shroud. Designed for this (very common) version of the ADXL345 ADXL345 Accelerometer: https://a.co/d/79bJakJ (The wires it comes with aren't…
New version coming soon ! Presentation video in english : https://youtu.be/uY0l6K3Hjew Vidéo de présentation en français : https://youtu.be/p4RYh3iLJaU English : https://lebois-racing.com/srt-accelerator-pedal-gt Base 30% infill, 0.15/0.2…
COMPANION PART: https://www.printables.com/model/342846-ai3m-anycubic-i3-mega-bed-handle-remix-with-adxl34 https://www.thingiverse.com/thing:5722475 (backup in case its ever not available here) This is useful only if you are running…
Big Tree Tech USB-C ADXL345 Accelerometer Side Mount for Creality Sprite Extruders. Mounts using a single M3 countersunk screw. Uses a thin profile that should fit in with your other Sprite hotend modifications installed. The mounting…
A hotend enclosure + a fun duct made for Creality E-Fit direct drive, but should be compatible with some other scenarios. It has a mount for accelerometer (15 mm between holes) for a Klipper use case. Also has a mount for BT/CR-Touch, you…
Designed for a DIY Accelerometer Trigger for the LabRadar Chronograph Trigger housing has a cylinder for the trigger assembly and a hole for the wire to exit. A velcro strap slot allows for securing mounting without a picatinny rail. Also…
It printed just fine with PLA on my Ender 3. No supports were needed if positioned lying on the side. The layer height was standard 0.2 mm.
A model made as a gift for a researcher. Printed using PLA, the translucent atrium was Atomic Filament Translucent Smoke Black https://amzn.to/4aeFIej Use an CA glue with an accelerator for best results when gluing PLA! These are the…
