Search results: bcar

Sort order

240 models

P
PrintablesEpicxxxx

Rev 2 EX BCAR.

Barrel Mounting System (designed to print at .12 layer height) The Rev 2 EX BCAR system is designed with performance in mind. The new mounting system implements Extra Inch Technology®. The new barrel mount increases average velocity to…

Downloads
1,756
Likes
221
Rating
4.88
P
PrintablesEpicxxxx

"ex" bcar barrel mount

Plain barrel mount for the “ex” bearing centering and rifling devices. This piece comes ready to print, I would recommend a brim at least on the main portion as you will see there is very little surface touching the bed. unfortunately it…

Downloads
830
Likes
102
Rating
5
P
PrintablesLeedle Dynamics

Hardware Free BCAR (For DZ Muzzles or 15mm OD Alu Barrel)

A bit of an experimental BCAR with agressive twisting for sticking inside DZ Muzzles or on the outside of 15MM OD aluminium tube

Downloads
605
Likes
133
Rating
5
P
PrintablesMighty Shrub

"Ex" BCAR Front End - Dart Zone Max Outlaw

Would you like your Dart Zone Max Outlaw to be more accurate, and look awesome while doing it?? Look no further than this drop-in replacement part that uses the “Ex” BCAR design by Epicxxx. This is installed just like the rest of…

Downloads
581
Likes
99
Rating
5
P
PrintablesManta Design

Xshot AEB Motorized Piston Pump BCAR Shroud

Update 8/4/25: Added a couple more versions with slightly adjusted openings if the original is too tight or loose for you. Alter the scale in your slicer if you need further adjustment. Easy to print shroud that friction fits over the…

Downloads
550
Likes
106
Rating
4.75
P
PrintablesCorvus

Xshot BCAR Shroud + Barrel Color Sleeve _ MPP _ X-Shot Motorized Piston Pump _ (or LONGSHOT 2.0)

Update --------- BCAR Shroud 1.1 ------> X-Shot MPP (or LONGSHOT 2.0 with EXTENDED custom barrels) + optional Barrel Color Sleeve for the MPP Wrap two to three layers of e-tape around the narrower rear section of the BCAR and insert it…

Downloads
432
Likes
104
Rating
5
P
PrintablesMisplacedMoose

"Moose Bite" SBCAR for Pro Nerf Blasters

Bearing orientation is marked on the prints themselves and it's not what you expect. Long collet needs 43 mm of barrel to attach to and is recommended for a tight concentric fit. Shorter collet needs 25 mm of barrel. Hardware is either 9…

Downloads
425
Likes
87
Rating
5
P
PrintablesTaffert Designs

The Nerf MooseSlug BCAR (bearing SCAR)

NEW!! - Added "Shorty" version for better muzzle clearance on Gecko 2.0 now 7mm shorter same shroud fits both versions.. _________ Features: Stronger pressure tongues won't snap easily Coarser threads won't strip Easy to turn grip Short…

Downloads
390
Likes
93
Rating
5
P
PrintablesChance

LockSleeve BCAR

This is the LockSleeve BCAR. It's what I use for competitive matches, and I think it's pretty damn good. It has two pieces: the Core, and the Sleeve. The Core has 6 "fingers" that sit around the barrel and are flexible. The Sleeve has…

Downloads
355
Likes
66
Rating
5
P
PrintablesMisplacedMoose

Foamgasm/Chance 15 bearing and 9 bearing BCAR

This thing is a waste of bearings compared to current options. Use this instead Uses either 9 or 15 3x7x3 F683ZZ flanged bearings and 3mm x 14mm pins to assemble. I used Foamgasm's collet and lynx connection and Chance's inline bearing…

Downloads
326
Likes
38
Rating
5

Shearforce Variable-Mode Nerf Rifling Attachment (PBCAR)

The Shearforce PBCAR is a variable-mode rifling attachment platform inspired by the principle behind the Rexfire Akasha “Super BCAR.” Featuring an initial, more aggressive PCAR segment to pre-rotate the dart, followed by a gentler BCAR…

Downloads
312
Likes
92
Rating
3.4
P
PrintablesZafC

Celestial BCAR

About: BCAR with aggressive venting and lots of options. Inspired by the Flag and Armor CNC BCAR and drawing ideas from Thantacles' RIPPCAR theory. Recommendations: >7 degrees low for up to 180fps, 6 degree med/high at 200, 5 degree high…

Downloads
284
Likes
82
Rating
5
P
PrintablesNekronomekron

hikari 103 - Nerf Blaster BCAR with quick release

I updated the hikari and made a modular version. You can find the new model here: https://makerworld.com/de/models/2446079-hikari-203-modular-bcar Explore the "hikari 103" - a high-performance 3D printed BCAR (Barrel Contact Accuracy Rig)…

Downloads
261
Likes
58
Rating
4.67
P
PrintablesChance

Null Pointer - A zero-degree BCAR

Uses either 9 or 15 MF63ZZ bearings (https://www.amazon.com/MF63ZZ-Shielded-Flanged-Flange-Bearing/dp/B07K78GY7N) and an equal number of 8-12mm M3 countersunk screws…

Downloads
214
Likes
53
Rating
5
P
PrintablesTi

Hardware-free "ex" threaded bcar

I took the threads from the ex bcar and grafted them onto Leedle's hardware-free bcar. Then I cut it in half. Compatible with the pins and rollers of the original hardware-free bcar, as well as any mounting system that uses the original…

Downloads
212
Likes
44
Rating
5
P
Printables79th Jedi

Nerf BCAR without cover

Same as the original BCAR with cover in every way, except that the main unit does not have the cover, because i like the aesthetic. Original files for the lock/collet are included as well. Link to the original BCAR with cover is under the…

Downloads
207
Likes
45
Rating
0
P
PrintablesZafC

Super BCAR Experimentation

Basically a public beta of "Super BCAR" testing models I throw together on a whim Apparently the Akasha BCAR works really good. Whether it's the enormous porting, the inline PCAR, progressive crush, or all of the above, I've no idea. May…

Downloads
205
Likes
58
Rating
5
P
PrintablesMoxieMan

Hardware Free BCAR - Ex Compatible

Use all the support parts from the original, but print this version of the body. There are a number of Rev 2 EX BCAR mounts now for various blasters. Now you can have a fully 3d printable BCAR. EDIT - uploaded a better version. Original…

Downloads
204
Likes
42
Rating
5
P
PrintablesWaFfLe

Umoya SuperBCAR

UPDATE: 20261002 I have been swamped with work and unfortunately haven't been able to dedicate the time to working on this project. However, my schedule has freed up and I should be able to get the final release version out by the end of…

Downloads
184
Likes
47
Rating
5
P
PrintablesMisplacedMoose

21 bearing BCAR and muzzle brake for 16mm nerf barrels

Uses 21 F683ZZ 3x7x3mm Flanged Ball Bearing and 3x14mm pins

Downloads
179
Likes
41
Rating
5
P
PrintablesCorvus

Rev 2 EX BCAR Adapter _ X-Shot Fury-X

Plug-in adapter for the EX BCAR Rev 2 to be easily attached to the X-Shot Fury-X. Works with the standard muzzle of the FuryX! It just needs 4g of filament. Other Fury-X stuff can be downloaded here. The file is already pre-oriented. My…

Downloads
169
Likes
39
Rating
5
P
PrintablesTofuKat762

5xR BCAR

This is the 5xR BCAR, the culmination of all my past BCAR work. I use this as a no-compromise BCAR for competitive games, incorporating design elements from past works, commercially available BCARs and imput from competitive players for…

Downloads
152
Likes
38
Rating
5
P
PrintablesZafC

Hardware Free BCAR for DZ muzzles and 16mm barrels with alternate V rollers

Leedle's BCAR adapted to friction fit over 16mm barrels, and alternate V shaped rollers (same size and larger). Some models require 10% scaling -v2 has bits to better friction fit over barrels so you can forego tape

Downloads
152
Likes
21
Rating
5

HCB Hardware Free BCAR

This is my take on a modular hardware free BCAR. It makes your blaster more accurate and also looks dope as heck. Its very accurate, even compared to other SCARs and BCARs I have laying around. It just uses pieces of filament as axles.…

Downloads
143
Likes
79
Rating
5
P
PrintablesJem657

Hardware free BCAR for 16mm OD barrels

This is a remix of the hardware free BCAR to fit on 16 mm OD barrels You will need to print 12 Pins and 12 Rollers. Make sure they will spin relatively freely when installed. If not trim the edges of the rollers and pins or sand the holes…

Downloads
132
Likes
24
Rating
5
P
PrintablesBuilder BB

GryphEX BCAR

Made using epicxxxx's bearing centering and rifling device with changes to accommodate fitting to a Gryphon with Banned Blaster cage. A tapered guide was needed to feed the darts into the device. Turned the orientation of successive sets…

Downloads
131
Likes
18
Rating
5
P

Dart Zone BCAR Shroud

a cosmetic cover for the Dart Zone BCAR by covering the bearing holes, allows the blaster to be safely ‘deprimed’ by covering the barrel with a fingertip

Downloads
131
Likes
25
Rating
0
P
PrintablesGemeneye

GP3D Nerf Pro Torrent Pump Kit with Epicxxxx Rev 2 BCAR Compatibility

Hello everyone! This is my remix of GP3D's beautiful Nerf Pro Torrent Pump Kit that allows it to be used with a Classic Epicxxx Rev 2 EX BCAR as well as with my 3D printed Torrent Stocks . I absolutely love GP3D’s aesthetic stylings, so…

Downloads
130
Likes
57
Rating
4.5
P
PrintablesFlygonial

Twist Clamp 3-Inline BCAR (5/8" to 16mm)

A general-purpose Nerf BCAR meant for 16mm OD barrel mounts. Features a barrel clamp to secure into place and a thumbscrew designed for extra leverage. Requires 12x M3x8-12 bolts, 9x F683ZZ 3x7x3 bearings, one M3x20 bolt and one M3 hex…

Downloads
130
Likes
37
Rating
5
P
PrintablesMoxieMan

Venom Pro Muzzle Extension (With BCAR option)

Follow the printing instructions for the original model, with one exception - print at .16 layer height or .12 layer height for the threading. Use it with the hardware free BCAR located HERE . Or use one of these alternate tips in lieu of…

Downloads
127
Likes
21
Rating
0
P
PrintablesChance

Zinc 2.0 - Integral Bearing SCAR (BCAR)

Uses: 9 3mm x 7mm x 3mm F683ZZ bearings ( https://www.amazon.com/dp/B07Z3DRZX9 ) 9 3mm x 14mm steel dowel pins ( https://www.amazon.com/dp/B07Y58JKMC ) This piece replaces your Zinc 2.0's front piece and integrates a 10 degree BCAR into…

Downloads
120
Likes
22
Rating
5
P
PrintablesDritten999

BCAR for Orion Blasters Lynx v2

I remixed the “ex” bearing centering and rifling device to integrate with the Lynx by Orion Blasters. It slots over a 45cm barrel and is secured with the standard front pin and a 10mm m3 button head screw and a heat set insert in the…

Downloads
119
Likes
26
Rating
5
P
PrintablesCorvus

Adapter - Silly SCAR Thread : EX BCAR Rev 2 Thread

Adapter - Silly SCAR Thread to EX BCAR 2 Thread Adapter to screw on an EX BCAR Rev 2 to a Silly SCAR thread (nut) quick and easy. Use the O-ring seal as usual to attach and fix the adapter to the barrel. Works also great with the Threaded…

Downloads
118
Likes
31
Rating
5
P
PrintablesFlygonial

Gameface Trion M3 Bolt BCAR

The Trion is a blaster that comes as a neat package configurable for a variety of games out of the box but doesn't include a muzzle device. 7.5 degrees was specified as a middle-ground twist ratio that isn't excessive for 200 FPS, is well…

Downloads
117
Likes
33
Rating
5
P
PrintablesChance

Trion BCAR

A BCAR for your Trion. Attaches to the orange plastic muzzle attachment point. The first few times you attach/detach it, it may be very tight on the last little bit, but it should wear in to be a snug-but-doable hand twist. If you can't…

Downloads
116
Likes
26
Rating
0
P
PrintablesCake

EX BCAR Remixes

A series of experimental BCAR remixes for the EX BCAR system. Many of these are untested. All are set at the 12.8mm squish setting except for CXCAR3-12-8_12-9, which goes from 12.8 to 12.9. The ones with increasing numbers are progressive…

Downloads
115
Likes
22
Rating
0
P
PrintablesTi

ScadDcar: Hardware-Free BCAR/DCAR With Customizable .scad File (Ex and Ex Rev 2 Threads)

Want a bcar, but don't want to shell out for bearings? Do you have very specific requirements for what your blaster needs to optimize accuracy? This is a fully printable bcar, or dcar, that you can customize yourself using OpenSCAD. Just…

Downloads
108
Likes
24
Rating
5
P
PrintablesNekronomekron

hikari 103 slim - Nerf Blaster BCAR with quick release

I updated the hikari and made a modular version. You can find the new model here: https://makerworld.com/de/models/2446079-hikari-203-modular-bcar Explore the "hikari 103 slim" - a high-performance 3D printed BCAR (Barrel Contact Accuracy…

Downloads
107
Likes
25
Rating
0

Hardware free BCAR for the Nerf Infinus

Edit 05/10/2024: After some more modification i've updated the design and it's now compatible with any dart design. Introduction This is an internal BCAR for the Infinus based on the Hardware free BCAR by LeedleDynamics. The rollers have…

Downloads
101
Likes
41
Rating
5
P
PrintablesMisplacedMoose

BCAR for SpitfireProducts Ranger Sniper Nerf Rifle

Hardware required: 42 x F683ZZ 3X7X3 bearings 42 3x22mm (or shorter) pins These can be found on Aliexpress, Amazon, or Moose Mod Shop

Downloads
100
Likes
31
Rating
0
P
PrintablesYetiEngineering

OpenBCAR - Nerf Rifling

OPEN-SOURCE, I have both .step and .stl files available aswell as my .f3d file Nerf rifling with options for 15, 12, 10, 8, 6 or 4 degrees of angle. Has ~12.55mm of crush Most options use 4 rows of 3 Options marked as compact use 2 rows,…

Downloads
95
Likes
58
Rating
5
P
PrintablesAshton Rogers

Silly-compatible Nerf BCAR

It is designed to be printed without supports. This is a significant improvement from my previous BCAR. It lacks porting/venting so it will not be ideal for high PT/barrel ratio blasters. Let me know what you think! The BCAR and the…

Downloads
93
Likes
32
Rating
5

Rev 2 EX BCAR adapters for the Protean

Introduction After tinkering around with the BCAR barrel inserts for the Protean and being frustrated with stuck and (with the dual stage cage) chewed up darts, I've started looking around for alternatives. I've stumbled upon the EX BCARs…

Downloads
92
Likes
17
Rating
5
P
Printablesflubb42

Nerf Nstrike Hardware Free BCAR

Created something silly yet simple for spring-modded Nerf blasters, as the full-length darts flew everywhere after the FPS increase. I was surprised it wasn't made yet, so here we go again. I took the model of the Nerf Delta Muzzle from…

Downloads
87
Likes
42
Rating
0
P
PrintablesMoxieMan

Rev 2 Ex BCAR Adapter for Venom Pro w/ lower Picatinny Rail

Have a BCAR & a lower picatinny rail on your Venom Pro. Print on its nose with organic supports (ensure you adjust your top z-distance. I used a .12 layer height with a .16 top z-distance and the supports came right off with no issues. I…

Downloads
86
Likes
20
Rating
0
P
PrintablesMoxieMan

Rev 2 EX BCAR Adapter for Venom Pro

Who doesn't like the tactile satisfaction of screwing on a silencer… I mean BCAR to your blaster and then lighting up your best friend? Now you can do that with a Venom Pro. Print & insert, attach your favorite Rev 2 EX compatible BCAR. I…

Downloads
85
Likes
22
Rating
0
P
PrintablesAndy L

Triangular Moose BCAR

Was having good results with Taffert Designs MooseSlug BCAR, but I really wanted that oddball triangular aesthetic - designs of which seem to have largely disappeared off printables/thingiverse/cults. So I remixed. Yes it's nowhere near…

Downloads
85
Likes
18
Rating
5
P
PrintablesLoneWolf052

'Woof' BCAR - Hardware free, low profile BCAR for the Fury X

UPDATE 30th Dec 2025: Added 'loose' versions of muzzle and rollers with more clearance for the filament. If you have trouble getting the filament in or if the rollers don't roll freely print the loose versions. This is a short and low…

Downloads
83
Likes
25
Rating
4.5
P
PrintablesChance

Covered 3-layer BCAR

Update 9/8/22: Added looser-fitting cover after reports of overly-snug covers. This is a 3-print, 3-layer (9 bearing) BCAR for foam blasters. There are vents near the base to allow excess pressure to escape without fishtailing the darts.…

Downloads
83
Likes
23
Rating
0
P
PrintablesZafC

Variable Hardware Free BCAR for 16mm barrels or DZ muzzles

Entirely printable BCAR with various options for rollers and angles. 5 ,6 ,7 ,8 ,10 ,12 , 15 degree options and more Flat, rounded, or V shaped rollers Additional crush by aligning the shroud to press rollers in. Make sure the rollers can…

Downloads
81
Likes
19
Rating
5
P
Printableslucas32

No Hardware BCAR For Silly Threading

Print with original settings

Downloads
81
Likes
23
Rating
5
P
Printablesgifd

Dart Zone Pro MK3 Experimental BCAR

An experimental 5° BCAR for the Dart Zone Pro MK3. Designed for Worker half length darts and made to fit into a Banned Blasters cage. Friction fits into the blaster using the cage and muzzle, with a piece to keep it in place. Still in…

Downloads
81
Likes
17
Rating
4
P
PrintablesHoneyBajjar

Rev 2 EX BCAR Suppressor Shroud

Can be used on any blaster that takes the EX BCAR rev 2 and has the exposed barrel space behind the bcar to accommodate the suppressor. Replaces the “DecoRing” part of the BCAR. Four versions are available: Regular for Classic BCAR…

Downloads
80
Likes
29
Rating
0
P
PrintablesLeeOh

BCAR for FDL-3

Angle: 8 degrees (optimized for FLD-3 standard build) Recommended FPS range: 130 - 200 FPS Required: 12 x MF84ZZ 4x8x3mm Flanged Bearings 12 x M4x10mm Screws 12 x M4 Washers Compatibility: Work with both half and full length darts. Note:…

Downloads
80
Likes
13
Rating
0
P

BOXER PRO SC BCAR by DMF

LASER YOUR OPPONENTS WITH THE BOXER PRO BCAR FROM DMF. Based on the Voidrunner zero degree BCAR this attachment help stabilizes the darts you are flinging causing major problems for the opposition. The rows are your preference. This takes…

Downloads
73
Likes
38
Rating
4
P
PrintablesManta Design

Fat Boy BCAR Shroud Xshot Motorized Piston Pump MPP

The Fat Boy BCAR Shroud features an interchangeable design. Included are 5 different shrouds that friction fit on for easy swap. Also has a built-in clamp that keeps it secure around the bcar and barrel. Uses M3 hardware but isn't…

Downloads
72
Likes
34
Rating
5
P
Printablesfirelion

“捷兔”5线轴承管 Agile Rabbit LockSleeve BCAR

介绍看图片。 2024/04/22 UPDATE: ADD 10/15/20/25 Bearing Version. BOM: F683ZZ flanged bearing 30 3 x (8 min~20 max) set screw 30 Aluminum alloy/PC/PVC … Tube 36mm OD x 34mm ID, 100mm long for 30 bearing version, 85mm long for 25 bearing version,…

Downloads
72
Likes
6
Rating
0
P
Printablesnammybd.

XShot Longshot BCAR/WCAR/DCAR

Made to work perfectly with a stock XShot Longshot. I extended the mounting area to 19 mm to get rid of the empty space that can hinder performance. I also added a screw hole on the side of the mount and expanded it to be able to screw it…

Downloads
71
Likes
8
Rating
0
P
Printablesmainmachine

X-Shot Thrasher Internal Ex BCAR

The thrasher is an excellent blaster however it isn't quite accurate enough for me out of the box. The internal barrel is simple and there's lots of room in there, so let's stick a BCAR in there! I originally wanted to put a version of…

Downloads
71
Likes
20
Rating
5
P
PrintablesTrevor

EX BCAR 18 Bearing Suppressor Lookalike

I took Epicxxxx's bearing centering and rifling mod for standard 16mm barrels and doubled up the amount of bearings then created a suppressor appearance cover to fit around it. I included 3 variations of crush with 8 degree spin. From…

Downloads
71
Likes
14
Rating
0
P
PrintablesMWHall

Meowser EX BCAR

NEW UPDATE Added a revision 2. This uses the threading from the rev 2 EX BCAR, so you can thread on any BCAR size/twist you want. Files and assembly/print instructions for the BCAR itself can be found here…

Downloads
71
Likes
8
Rating
0
P
PrintablesTi

Dart Zone/Gameface Trion "Ex" Bcar Thread Adapters

Attach your bcar with “ex” threads to your gameface trion or dart zone blaster! The original ex bcar barrel mounts are intended to be printed at .12mm, therefore so are these. They both need supports, touching build plate only. Print the…

Downloads
71
Likes
21
Rating
0
P
PrintablesZafC

Infernal BCAR - A Hardware Free Modular BCAR

A cheaper, fully printable, modular alternative to the Celestial BCAR. All the original angle and crush options are here as well as some additional angles that wouldn't error out my timeline. The customizable shroud designs return and a…

Downloads
67
Likes
46
Rating
0
P
PrintablesChance

Covered 5-layer BCAR

Update 8/24/22: Uploaded new version of everything. Bearings are now centered on their flanges instead of their bodies, which better reflects which parts are in contact with the darts and improves accuracy. Vents have been made larger and…

Downloads
67
Likes
16
Rating
5
P
PrintablesTFireFox

HC Diana Threaded BCAR

I have been wanting a BCAR for the Diana for awhile. Unfortunately, the freight is more expensive than the product itself. This is a 15 degree BCAR by Foamgasm that has been shorten and made a little bit wider so that the crush is less…

Downloads
66
Likes
19
Rating
5

Cover Shroud for X-Shot BCAR

This is a shroud cover that fits over the BCAR that comes with the Xshot Motorized Piston Pump blaster. It has very slight channels inside that will grip on your BCAR. The nature of the Xshot BCAR has all the moving parts contained within…

Downloads
66
Likes
23
Rating
5
P
PrintablesCorvus

Threaded Faux Barrel Muzzle *** "EX" BCAR Front End - Dart Zone Outlaw (by Mighty Shrub)

Threaded Faux Barrel Muzzle (ID=17,1mm) --> "EX" BCAR Front End (by Mighty Shrub) - Dart Zone Outlaw I made a printed faux barrel with the thread of the EX BCAR to fit the Outlaw 'EX' BCAR Frontend by Mighty shrub as "placeholder" for an…

Downloads
65
Likes
35
Rating
0
P
PrintablesKptnAutismus

Alternate Rev.2 EX BCAR mount

my take on a BCAR mount. print out of something that can hold it's shape better than PLA. i used ABS, but PETG should work too.

Downloads
63
Likes
19
Rating
0
P
PrintablesAshton Rogers

16mm Nerf Barrel BCAR and PCAR attachment

THE NEWEST BCAR I POSTED CAN BE PRINTED WITHOUT SUPPORT. IT LOOKS BETTER AND IS EASIER TO PRINT. The BCAR is set at 10 degrees with progressive crush. Not sure if anyone has done that before so please give me feedback on its performance…

Downloads
63
Likes
23
Rating
0
P
PrintablesJosh

FDL3 BCAR

Dual stage FDL3 BCAR 15deg. (6) F683ZZ flanged bearings https://www.amazon.com/gp/product/B07Z3DRZX9 (6) 3mm x 14mm dowel pins https://www.amazon.com/gp/product/B0819FZM8F Print at 0.15mm layer height or smaller. Make sure you are not…

Downloads
63
Likes
5
Rating
0
P
PrintablesManta Design

Xshot MPP Motorized Piston Pump BCAR Clamp

I found that the xshot bcar was loose on some of my barrels so I quickly designed this to fix the issue. Model is print oriented and doesn't require support. Uses M3 hardware. *I only have pla+ at the moment so I am unsure if basic pla…

Downloads
61
Likes
19
Rating
5
P
PrintablesChuck Bengis

EX BCAR Rev 2 Compatible Sniper Barrel Brake for Nerf blasters

Made an adapter for Moose's barrel brake using the middle collet on the double ended threads. By keeping the parts separate, the BCAR on the inside of the brake can be swapped by twisting and removing the assembly from the brake housing.

Downloads
59
Likes
26
Rating
0
P
PrintablesTrevor

Nerf Pro Torrent BCAR Collet Front End

I smashed Redcowls front end with Leedle's hardware-less bcar and here we are. So far it works great. You want a barrel that protrudes from the front end 31mm for the best results.

Downloads
57
Likes
16
Rating
0
P
PrintablesJC works

X-shot Spinshot (BreakBarrel) BCAR barrel

I know some mods can boost this blaster to much higher FPS (by swapping to a longer barrel), but I am not a fan of lengthening this already long blaster; I would like to keep it as is. So I made this to boost performance a bit while not…

Downloads
54
Likes
30
Rating
5
P
PrintablesFoamProArmory

The .608 BCAR. A BCAR With MASSIVE BEARINGS

A BCAR With MASSIVE BEARINGS Uses 9 .608 ball bearings which are a perfect press fit on the BCAR. Requires one O ring for the collet. This is a 5-degree BCAR for high fps blasters 200-300fps. More options coming soon! Step file included…

Downloads
53
Likes
34
Rating
5
P
PrintablesNitrEX4

BCAR Compatible Barrel Shroud for Kirin

I remade the shroud from scratch then made the shroud big enough to allow for a BCAR. It can probably fit any BCAR but I've tested with the Worker BCAR without sleeve, ex BCAR, and ex BCAR rev2. Print Instructions: 3-4 walls, 15% infill,…

Downloads
52
Likes
10
Rating
5
P
Printablesmadeinhua

Compact Rev 2 EX BCAR for Dart Zone Outlaw Foam Blaster

This is a remix of Epicxxxx's excellent Rev 2 EX BCAR, shortened to remove the threaded section and with a 19mm insert added. It's optimized for the Dart Zone Outlaw foam blaster. The 8 degree version with #3 crush seems to stabilize Ruby…

Downloads
51
Likes
20
Rating
0
P
PrintablesChuck Bengis

EX BCAR Rev 1 to 2 Adapter

Simple threads linking EX BCAR rev 1 and 2.

Downloads
50
Likes
7
Rating
5
P
PrintablesZafC

Low/No Hardware BCAR/DCAR for Siren Blink

BCAR for the Siren Blink using washers like BaconCreations' DCAR design. Looser version washers need the inner sleeve to get effective crush and friction on darts (It just moves out of the way if not). Sanding of pins recommended to get…

Downloads
49
Likes
16
Rating
5
P
Printablesnil0

Ontos SillyHikari PCAR/BCAR

This remix adds new inserts for the Ontos SillyHikari Scar by LS MODS . Also adds a knurled TPU ring to the barrel attachment base. This setup allows you to quickly switch between different *CARs while maintaining a consistent look. PCAR:…

Downloads
49
Likes
21
Rating
0
P
PrintablesKyle Bernard

NERF Ultra AMP/FOCUS Integrated BCAR for Kuryaka's Short Dart Single Stage Conversion Kit

This BCAR is only designed to be used after mod'ing your Ultra AMP/FOCUS with Kuryaka's Single Stage Short Dart Conversion kit. I have designed this BCAR to be a simple drop-in (NO SHELL CUTTING). This BCAR fills all of the empty space in…

Downloads
48
Likes
13
Rating
0
P
Printablesdonutcat

Null Clamper - A Mishmash BCAR

I fancied up the marvelous Null Pointer by adding the entirely superfluous camlock mechanism from the Hikari 103. Completely unnecessary but feels so nice. Includes 9 and 15 bearing versions. Don't close the camlock without a barrel or…

Downloads
48
Likes
15
Rating
0
P
PrintablesCorvus

Lynx _ EX BCAR Rev.2 Adapter _ (just slide it onto the barrel)

Simply slide it onto the aluminum barrel. I added the thread for the EX BCAR Rev.2 to a friction fit sleeve for 16mm aluminium barrels to easily attach an BCAR to the LYNX. The sleeve has an outer diameter of 19mm and can be slided…

Downloads
47
Likes
23
Rating
0
P
PrintablesChuck Bengis

Rev 2 Ex BCAR Front End for Dart Zone Outlaw

Updated front end to have the male threads for v2 ex bcars.

Downloads
47
Likes
12
Rating
5
P
PrintablesHoneyBajjar

Stryfe Banned Blasters Cage (with optional BCAR)

Both of these cages require shell cutting. For the regular cage refer to the Banned Blasters video on shell cutting a Stryfe. For the BCAR version, extra shell cutting is required near the front, as well as some for the front muzzle…

Downloads
47
Likes
20
Rating
0
P
PrintablesTFireFox

BCAR PCAR Hider

I don't like the long barrel sticking out of my blaster. So I designed a ‘suppressor-like’ thingie to hide my BCAR or PCAR while at the same time making it a little more tacticool (or for some, might just find it ridiculous). I'm using…

Downloads
45
Likes
5
Rating
0
P
PrintablesMSBstudios

combcard v.3

the all new combcard v.3 is a perfected version of my first two combcards (see link below) featuring stronger teeth that are less likely to crack (like you have to try really hard) and a new stylish key ring hole in the corner for that…

Downloads
45
Likes
18
Rating
5
P
PrintablesGikote

Stryfe Muzzle BCAR

Description : I wanted an accuracy device for my Stryfe, and I needed to decrease the FPS a bit. I tried some PCARs and even a NStrike lug BCAR, but was not thrilled with any of the results. That made me think of other ways to mount it…

Downloads
45
Likes
27
Rating
0
P
PrintablesCorvus

BCAR Shroud - X-Shot Longshot 2 (compatible with stock barrel, muzzle and BCAR) - XLS 2.0

BCAR Shroud -- X-Shot Longshot 2.0 (compatible with stock barrel, muzzle and BCAR) .... for a bit more color customisation on the blaster and to partially cover these unsightly high-gloss plastic parts. Shrouds for the X-Shot BCAR, to be…

Downloads
45
Likes
14
Rating
0
P
PrintablesAstropulse

Simple 6 Bearing Silly Collet BCAR

Pretty simple, a bcar with 6 bearings. Uses the same 3x7x3 F683ZZ flanged bearings and 3x14mm pins as most of Misplaced Moose's bcars, because it uses the same geometry. Buy two of these:…

Downloads
44
Likes
20
Rating
5
P
PrintablesThe_GOAT

Kuragari - Foam Dart Blaster BCAR

Its the hikari 103 with a silly collet. I also un progressived the rifling and made it 8 degrees of twist instead. Both variants are available for those who want them. This uses F683ZZ bearings and is 16mm barrel compatible because that…

Downloads
43
Likes
14
Rating
4.5
P
PrintablesGeorgy

EX BCAR Rev2 barrel mounts - 15&16mm barrels - slotted - wide bore

Epicxxxx epic bcar V2 tailored to fit 15&16mm OD barrels like on EU Lynx Muzzle vent slots added for underbarreded builds Internal bore widened to 14 mm Follow Epicxxxx's printing instructions for thread printing!

Downloads
43
Likes
12
Rating
0
P
PrintablesZafC

Ripjaw BCAR - A Progressive Celestial BCAR

A dedicated page to a BCAR previously buried under hundreds of permutations of its predecessor. This BCAR uses the Celestial BCAR's geometry to make a set of progressive twist options, maintaining the original flange alignment, heavy…

Downloads
42
Likes
16
Rating
0
P
PrintablesChance

Covered BCARs (3-layer and 5-layer) with o-ring retention

Important note: print the BCAR bodies muzzle-down! Much like my other BCARs, these all use F683ZZ (3mm x 7mm x 3mm) flanged bearings and 3x14mm dowel pins. These also use the same -016 O-ring as Sillybutts' MXL spigot scars (more info at…

Downloads
42
Likes
5
Rating
5
P
PrintablesZafC

Lynx Keyed Celestial BCAR

Celestial BCAR but with the mount adjusted to fit snugly into a Lynx and be secured by the pin. Existed before in the original files, but in very limited configurations. It just seemed a little moot at the time since a standard lynx is…

Downloads
40
Likes
13
Rating
0
P
PrintablesKnoppix Hire

Double Length 12.4mm flange Crush X 20 degree EX BCAR

The original EX BCAR wasn't crushing or spinning my stefan darts properly so I chopped a second one and double stacked.

Downloads
40
Likes
7
Rating
0
P
PrintablesKyle Bernard

Nerf BARRICADE RV-10 Integrated BCAR (Elite Dart Conversion)

This BCAR was designed to be a simple drop-in (NO SHELL CUTTING) for the OLD BARRICADE RV-10. This BCAR fills all of the empty space in the original muzzle/barrel adding much needed accuracy. NOTE: This BCAR will only fit if you are using…

Downloads
40
Likes
15
Rating
0
P
PrintablesCorvus

Smooth Collet + Dekoring (no X-knurling) _ EX BCAR Rev 2

Smooth Collet and Dekoring (no X-knurling) for the EX BCAR Rev 2 I wanted these two parts looking smooth on the outside and removed the X-knurling. My print settings for PLA: 0,2mm layer height 5 walls 20% gyroid infill 7 top and bottom…

Downloads
39
Likes
13
Rating
5
P
Printablesbionicurry

mystery ex bcar

20 bearing BCAR using “ex” threading F683zz 3x7x3 bearings and M3x8 bolts Bearing flange faces arrow in picture

Downloads
39
Likes
4
Rating
0
P
PrintablesZafC

Low Hardware Washer BCAR for 16mm barrels and DZ muzzles

A low hardware bcar using M4 washers to spin darts. Fits over 16mm barrels and into DZ (19mm) muzzles. No barrel stop, so just make sure to stop before it touches the washers. 5,6,7,8,10,12,15 degree options available. Can add more if…

Downloads
38
Likes
14
Rating
0