Search results: cw

Sort order

799 models

P
PrintablesAdam Kimmerly

Morse Code Paddle / CW Key

BACKGROUND: As an avid portable HF operator, regularly activating SOTA summits and parks for POTA, I have been disappointed with the performance, cost, and size of cheap morse code paddles. So, I designed my own. For portable ops, or to…

Downloads
4,618
Likes
505
Rating
4.98
P
PrintablesLirion

Router lift for Dewalt DCW604

This model is inspired by the design by USSA Design (watch their video here: https://www.youtube.com/watch?v=2JYTYOJt_m4). I made my own so it worked with my Dewalt DCW604 router. You will need to print 4x support screw 4x support screw…

Downloads
1,090
Likes
251
Rating
5
P
PrintablesBill Porter

Case for K6ARK Dual Paddle CW Key

I really like the K6ARK morse code key, but I have managed to break a couple of them by carelessly storing them in my kits. This case prevents the paddles from being touched while stored. It is designed to hold the key in the case with a…

Downloads
285
Likes
36
Rating
5
P
PrintablesZbyněk Král

Filament Dryer Adapter for Gorenje FDK500GCW

The Filament Dryer Adapter, a complete redesign of the original by @Haprog , was created in OnShape and subsequently modified for the Gorenje FDK500GCW dryer. This adapter is compatible with all Gorenje dryers featuring a 310 mm tray…

Downloads
114
Likes
19
Rating
5
P
PrintablesVincent

Bushing Baseplate for Dewalt DCW600B Palm Router

These baseplates replace the stock baseplate and integrate a bushing for use with templates. I use these for engraving bits which don't have bearings. It can be hard to see what you are doing with dust extraction so I printed one in…

Downloads
67
Likes
6
Rating
0
P
Printablestomatis

Cover substitution for BK21-V27454-FCW on the inside of sliding door of a Ford Transit Custom

Self designed alternative cover substitution for BK21-V27454-FCW on the inside of sliding door of a Ford Transit Custom Prequisites: * Some welding glue (like UHU Plast Special) * Some more bit elastic glue (like UHU Plus 2 Component…

Downloads
61
Likes
4
Rating
5
P
PrintablesMatthew 144

Pointy flash hider 14mm CCW for airsoft

flash hider for airsoft https://www.printables.com/model/578627-fgc-6-fgc-9-mkii-stingray-flash-hider-14mm-ccw-for

Downloads
39
Likes
3
Rating
0

Circle cutting jig for DeWalt DCW600 router ; vykružovací přípravek pro frézku DeWalt DCW600

Na přípravek se originálními šrouby připevní tělo frézky DeWalt DCW600. Do materiálu pro opracování předvrtáme otvor průměru 1,5mm ve středu zamýšlené kružnice či oblouku. Jezdcem nastavíme poloměr otáčení frézky. K výtisku je zapotřebí…

Downloads
33
Likes
7
Rating
0
P
PrintablesMiki

AfterburnerPCB_to_CW2

content 3 pieces 2 washer 1 adapter. U need to cut out a bit from the cw2 enclosure so Ucan plug the connector of the toolhead. No support needed. nozzle 0.4 layer height 0.2

Downloads
9
Likes
1
Rating
0
P
PrintablesMücke

APS/FCW - Striker 12 - Sling Locking Bolt Airsoft - Free Download

A bolt that prevents your wire-sling-loop-thingy from backing out while gaming.A bolt that prevents your wire-sling-loop-thingy from backing out while gaming. Its an easy print, use your prefered settings.

Downloads
5
Likes
2
Rating
0
P

Tamiya Lunch Box – Front Shock Tower Brace ( frame CW-01 ) Barra duomi anteriore per Lunchbox

ENG: I designed this front shock tower brace for the Tamiya Lunch Box CW-01 chassis. The brace connects the two front shock absorber mounting towers, increasing the structural rigidity of the chassis and reducing flex under load.…

Downloads
5
Likes
3
Rating
0
P
PrintablesSalas Designs

Tapo TCW61 for Ender 3 and Ender 3 Pro

Camera holder for the Ender 3, designed to securely accommodate the Tapo TCW61 as well as other cameras that utilize the same size adapter. The design also features integrated notches to accommodate zip ties, allowing for a tighter and…

Downloads
4
Likes
3
Rating
0
P

Shox spacer Tamiya Lunchbox cw-01 spessori ammortizzatori per Tamiya Lunch box

ENG: I designed these 7 mm spacers for the stock shock absorbers on the Tamiya Lunch Box (CW-01 chassis). They fit on top of the chassis shock mounts and feature a snap-fit design, allowing them to clip directly onto the threaded shock…

Downloads
2
Likes
1
Rating
0
P
PrintablesRecticle

Airsoft Suppressor SOCOM 2 Series 14x1 CCW

Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…

Downloads
3,895
Likes
427
Rating
4.86
P
PrintablesCustomCreations

Voron CW2 Stealthburner EBB SB2240 PG7 Umbilical Mount

This mount raises the PG7 so you don't have a large “S” loop when using the smaller mounts. This design was provided by Nyxcode on Voron discord. Enjoy

Downloads
2,633
Likes
298
Rating
4.94
P
PrintablesKajasX

dust and sawdust extraction module for DeWalt milling machine DCW600 DCW604

Alternative sawdust extraction adapter for the DeWalt DCW600, DCW604, D26200, DWP611 milling machine. This adapter has the huge advantage that it does not have to be screwed onto the milling machine, but just clicks. In addition, it has a…

Downloads
2,175
Likes
381
Rating
4.94
P
PrintablesPlasticPusher

Voron Stealthburner CW2 Umbilical SB2040 CAN BUS cable anchor

[English] I used the chain anchor 2hole design, closed the hole at the tip and enlarged the anchor a bit because I didn't like the designs or the just didn't fit. It includes a M12x1.5 thread to be able to attach a PG7 cable gland. Just…

Downloads
1,671
Likes
138
Rating
5
P
PrintablesDavid Relich

UPDATED - Voron 2.4 CW2 (RC1) Filament Runout Sensor Mod

I print big things and the thought of wasting filament and time because suddenly, in the middle of the night, the filament runs out, is not something I am fond of. So I created a simple filament sensor mod for Voron's CW2 (RC1), using a…

Downloads
1,104
Likes
254
Rating
4.56
P
Printablesex-nerd

DeWalt DCW210 Sander to 27mm Festool hose adapter

Adapter allowing DeWalt's DCW210B sander (or any other tool compatible with the DWV9000 adapter) to a Festool 27mm dust extractor hose, with or without the twist-lock mechanisms each connector allows. Updates: 2025-09-21 Increase…

Downloads
1,083
Likes
145
Rating
5
P
PrintablesGodlikeOne

Mock Suppressor For Airsoft - 14MM Counter-Clockwise (CCW) Threads - Fits xCortech Tracer

I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…

Downloads
1,083
Likes
97
Rating
3.67
P
PrintablesJonathan Kayne

Iambic CW Morse Code Paddle by KM4CFT

This is my take on an Iambic Paddle for CW (Morse Code) Operation. It takes inspiration from the CWMorse Pocket Paddles but is smaller and can be made at home! I Recommend printing this in PETG for durability, but you can print this in…

Downloads
1,035
Likes
142
Rating
5
P
PrintablesNortonTech

Filametrix Body (CW2) for SB2209/SB2240 with Dual Filament Sensors and ECAS

V1.1 - UPDATE: As @Hornet331_645553 noticed and mentioned, there was a slight misalignment with the lower sensor. I have implemented a fix for it as well as added slightly more clearance for the upper D2F switch, hopefully making it…

Downloads
832
Likes
106
Rating
5
P
PrintablesB0urne

12mm CW to 14 CCW threaded airsoft adapter

A 12mm CW to 14 CCW threaded adapter for fitting a tracer unit or mock suppressor on an airsoft gun.

Downloads
804
Likes
72
Rating
5
P
PrintablesNuno

RCW-0001 Ultrasonic Sensor Case

Remix of "Ultrasonic Sensor Housing" by Ivanchew to fit an RCW-0001 sensor instead of the original SR-04 sensor. If you don't know, the RCW-0001 is a 3.3V ultrasonic sensor which is ideal to use with an ESP8266 :) Onshape model can be…

Downloads
788
Likes
14
Rating
0
P
Printablesmilspecmoehring

Airsoft Glock Compensator for 14mm CCW

Airsoft Muzzle device for Glock Models with a Threaded Barrel. Attaches via M14x1 LH threads. This Print consists of two parts. A threaded insert which goes onto the threaded portion of the outer barrel and the comp itself which simply…

Downloads
758
Likes
113
Rating
0
P
PrintablesBudwin

CW Flash Inspired Helmet

CW Flash Inspired Helmet Enjoy Category: 3D Printing

Downloads
719
Likes
113
Rating
5
P
PrintablesLCSteve

DeWalt Router DCW600 Circle / Edge Tool

I needed to make some varying sized circle cuts with my DeWalt 20V DCW600 router and found bobmakes awesome model. I am even more thankful that he included some cad files as my made mods so much easier so THANK YOU! I originally started…

Downloads
702
Likes
148
Rating
5
P
PrintablesAdam Kimmerly

Leg Strap Base Plate for K6ARK CW Key / Morse Code Paddle

Love your K6ARK morse code paddle, but want more mounting options? Look no further. Simply print one of these three 3d printed plates to suit your needs; the angled ones for a right or left leg strap, or the straight one for a desk mount…

Downloads
683
Likes
94
Rating
5
P
Printablesmilspecmoehring

Barrett Style Muzzle Brake for 14mm CCW

Airsoft muzzle brake inspired by the distinctive muzzle device used on the infamous Barrett anti-material rifles. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 100% Infill 0.1mm Layer Height…

Downloads
675
Likes
67
Rating
4.5
P
PrintablesRon

Stylish Ticwatch Pro 3 stand

A stylish remix of a Ticwatch Pro 3 stand - The model is separated into 3 models for easier print with minimum support and allows you to print it with two different colors. A wider Base with the company's logo. I provided only STL files…

Downloads
659
Likes
104
Rating
4.85
P
PrintablesRoed

Voron Stealthburner with CW2 - Door and mount for BTT EBB36

On my Voron 2.4r2 i have an BTT EBB36 v1.2 installed. Since the board is mounted on the back of the LDO Nema 14 stepper behind a ClockWork 2 the cables came extremely close to the drag chain when homing. Also the wires were exposed on the…

Downloads
654
Likes
82
Rating
5
P
PrintablesLiron

Mobvoi TicWatch Pro 5 Stand

Rotate Y-axis by 90 degrees Infill: 20% Resolution: 0.28mm Support: yes Block support for text part (and pen holder)

Downloads
637
Likes
50
Rating
5
P
PrintablesYuriO

Rigid EBB36 v1.2 mount on Voron CW2 / Stealthburner - Tested on VT

This is a rigid mount for the BTT EBB3.6 v1.2 toolhead board on the ClockWork2 / Stealthburner. The plate is supported on three points and a lot more rigid than other solutions. It was only tested on a Voron Trident. No tests currently on…

Downloads
622
Likes
64
Rating
5
P
PrintablesTurge
Downloads
622
Likes
121
Rating
4.88
P
PrintablesonlyJ35T3R

Voron Stealthburner CW2 M12x1,5 Umbilical Cable Holder

Simple M12x1,5 Cable Holder for Umbilical with Can-Bus. BOM: 1x M3x20 SHCS 1x M3x8 SHCS 2x Heat-Set Insert M3x5x4

Downloads
615
Likes
57
Rating
0
P
PrintablesKajasX

Sawdust catcher for DeWalt DCW600, DCW604

Sawdust catcher for DeWalt DCW600, DCW604 to increase sawdust extraction efficiency, which is easy to snap onto the original base of the DeWalt DCW600 milling machine (theoretically it should work for the D26200, DWP611 as well, but I am…

Downloads
601
Likes
90
Rating
5
P
Printablescliftoce

Voron Trident Horizontal Umbilical Chain for Stealthburner/CW2

Background After switching my Trident over to using a CAN toolhead and removing the X/Y cable chains, the one thing that I wasn't satisfied with was umbilical wire management. Unlike on the Voron 2.4, piano wire isn't very practical since…

Downloads
597
Likes
100
Rating
5
P
PrintablesUntangleWORKS

FGC-6: Sound Amplifier for 14mm CCW for airsoft

this is modeled so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels. there is the normal version and a FGC6 version this will give a bit more sport by sliding a bit over the barrel.…

Downloads
594
Likes
81
Rating
4.33
P
Printablesjmillerfo

Voron 2.4 CW2 Filament Out Sensor

Discussion Update 25 June 2024 The lower filament path is designed for a PTFE tube with a 3mm ID/4mm OD. Chamfer the end next the gears. This will provide a large target for the filament as it exits the extruder drive gears. Update V2.6:…

Downloads
589
Likes
114
Rating
4.5
P
PrintablesLittle

SB2209 / SB2240 - CW2 Cable Bridge, PG7

Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…

Downloads
585
Likes
80
Rating
5
P
PrintablesRob W1RCP

Iambic CW Morse Code Paddles with Bearings and Magnetic Return

The paddles I've created differ slightly from the design that I Remixed. These paddles use bearings for less friction, and the return tension is created with magnets instead of a spring. I have uploaded a PDF with step by step…

Downloads
578
Likes
49
Rating
4.8
P
PrintablesFoppemoa

Electrolux dual hose conversion for EXP35U538CW

This is a dual hose conversion rear panel for the "Electrolux Chill Flex Pro EXP35U538CW" airconditioner. I implemented the same Electrolux connector made by wejn . It works great with his 150mm hose attachment .…

Downloads
575
Likes
48
Rating
5
P
Printablesolsenge

--->>>"Macwatch"<<<--- Apple watch stand/charger

Introduction: Inspired by my own “ https://www.printables.com/model/474843-integrated-businesscard-machine ” I wanted to make a somewhat similar design for an apple watch stand/charger. I therefore came up with the “Macwatch” resembling…

Downloads
574
Likes
90
Rating
4.67
P
PrintablesKajasX

base for DeWalt DCW600 D26200

Alternative base for DeWalt DCW600 and D26200 milling machines. I made this base so that I wouldn't have to screw the original base onto the milling table every time I wanted to use the milling machine on the table. Cutting depth…

Downloads
559
Likes
152
Rating
5
P
PrintablesAdam Kimmerly

Single Lever Morse Code Paddle / CW Cootie Key

BACKGROUND: After designing a super simple iambic paddle for portable ops , I had multiple requests for a single lever version. So, here it is. I added a small snap-on cover to the design, but it's not entirely necessary. The hole in the…

Downloads
553
Likes
73
Rating
5
P
Printablesbobmakes

Router Sub Base for Guide Bushings for Dewalt DCW600/DCW611

I recommend 4 top and bottom layers, 3 walls, 30% infill.

Downloads
542
Likes
82
Rating
5
P
PrintablesPrusa Research

CW1 IPA tank cover - locking system

Locking system for Original Prusa CW1 IPA tank cover prevents spillage of containing liquid in case of accidental tipping. Print instructions 3MF is prepared for all in one printing. No supports required. Tested with Prusament PETG

Downloads
533
Likes
100
Rating
4.9
P
PrintablesUntangleWORKS

FGC-6: FGC-9 MKII Stingray flash hider 14mm CCW for airsoft

this flash hider design is from the designer Hotsauce, that is made for the FGC-9 MKII Stingray edition. that is modded so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels.

Downloads
527
Likes
57
Rating
4.67
P
PrintablesTiten

24MM RH/CW to 14MM LF/CCW for airsoft AK's

Print slow and with supports, high infill/multiple perimeters for strength.

Downloads
525
Likes
26
Rating
0
P
PrintablesLeiwandizer

Stealthburner CW2 CPAP mod

Substituted the 5010 part blower with a much more powered WS7040 blower

Downloads
522
Likes
89
Rating
5
P
Printablesdsharlet

DeWalt trim router dust shroud (DWP611, DCW600, A27941)

I really don't like dust flying around my garage, routing edges was always one of the worst offenders. This shroud, combined with the standard dust collection port for DeWalt trim routers, will nearly eliminate stray dust from edge…

Downloads
502
Likes
78
Rating
4.5
P
PrintablesCitruspers

MP7 12mmcw to 14mmccw adapter (airsoft)

A simple adapter to mount common 14mm CCW parts on your 12mmcw MP7 AEG barrel

Downloads
501
Likes
40
Rating
0
P
PrintablesPetr Kašpar

Stealthburner cw2 filament sensors with ECAS latch

My update filament sensor before and after the extruder for ERCF Rabbit Feeder. 2x sensor D2F-5 2x ball 5,5mm 4x tapping screw M2x10

Downloads
499
Likes
66
Rating
5
P
PrintablesUntangleWORKS

FGC-6: thread protector for 14mm CCW for airsoft

this is modeled so it can be threaded on the 14mm CCW barrels tips of airsoft replicas and the FGC-6 14mm CCW outer barrels. print settings: 0.2 layer hight should be fine. you can use the 8 layer walls and a 40% infill. but personally I…

Downloads
494
Likes
46
Rating
0
P
PrintablesPrusa Research

CW1 to CW1S Platform Upgrade Printable Parts

Upgrade the platform on your CW1 to the CW1S version. The platform will become easily removable with the option of attaching the protective FEP foil. Both the Platform star and the Ring separately fit both the MK3S+ and MINI+ bed sizes.…

Downloads
488
Likes
36
Rating
4.86
P
PrintablesTheVoronModder

CW2 Lightweight

Introducing the “anorexic” ClockWork 2 aka SKELETONIZED CW2. Lighten up your heavy StealthBurner Tool Head. Use PIF Standards for printing. Preferably ABS, ASA or tougher material. Layer height: 0.2mm Extrusion width: 0.4mm, forced Infill…

Downloads
470
Likes
94
Rating
5
P
PrintablesDivideby0

Wall mount for DeWalt DCW210 20v random orbit sander

Wall mount for DeWalt DCW210 20v random orbit sander

Downloads
465
Likes
60
Rating
5
P
PrintablesEdan farr

Honeycomb 14MM CCW thread Airsoft suppressor

Hey all, Made this Suppressor while I had some down time and had nothing to do. Fits a 14MM Counter Clockwise thread that is common on most Airsoft rifles. Made this for my G&G combat machine. Adds about 155mm of extra outer barrel length…

Downloads
465
Likes
49
Rating
5
P
PrintablesGonzoStrange

Updated CW2 EBB SB2209 Fan Housing / Filament Sensors for ERCF / Filametrix / Dragon Ace

CW2 Main body for use with the BTT EBB SB2209/RP2040 canbus toolhead board. Dual filament sensors for use with the ERCF. Updated 9/23/25 New and improved EBB fan housing, way more room and improved air flow. Fixed the tight limit switch…

Downloads
459
Likes
65
Rating
5
P
PrintablesfbeauKmi

PUG holder for CW2 / LGX Lite

Nice feature No need to disassemble the wire harness to install this gland. Bill of Materials Category Qty Description Notes Hardware 3 M3 heat insert Voron BOM Hardware 2 M3x10 SHCS

Downloads
434
Likes
40
Rating
5
P
PrintablesJDeVil

HCW-M421 Delay Timer Enclosure

Mountable enclosure for HCW-M421 Delay Timer Module. Requires: 4x M3 heatset inserts 4x M3x15mm brass standoffs 4x M3x6 screws of your choice for the lid Update 1: Added option of Lid with Integrated Standoffs in Lieu of Brass Standoffs…

Downloads
427
Likes
29
Rating
0
P
Printablestachanka71

Mock Suppressor for Airsoft-14mm CCW Threads

print with brim for better adhesion

Downloads
418
Likes
26
Rating
5
P
PrintablesUnknown1622

127 mm ( 5" ) Airsoft Mock Suppressor / Silencer ( 1/2 inch CW thread )

print thread side up 100% infill 0.2 mm layer height

Downloads
417
Likes
29
Rating
0
P
PrintablesKajasX

Circle jig for DeWalt DCW600 DSW604

Circle jig for DeWalt DCW600 DSW604, which is attached to the original guide of the parallel stop and also uses the original locking screw. It is only necessary to melt the nut M3 to fix the circle axis

Downloads
412
Likes
135
Rating
5
P
PrintablesHenryA

EBB36 mount for Voron Stealthburner (CW2)

This is my take on EBB36 canbus board holder for Voron Stealthburner. I have taken the model from Kotvic (Thank you!) and pretty much redesigned it to address some issues I have found with the original model: Heat inserts holes were too…

Downloads
404
Likes
50
Rating
5
P
Printablessorted

Voron Stealthburner CW2 Chain anchor PG7

Remixed Stealthburner CW2 chain anchor for PG7 mount

Downloads
400
Likes
33
Rating
5
P
PrintablesAdam Kimmerly

Ultra-Portable CW Morse Code / Telegraph Key

BACKGROUND: As an avid portable HF operator, regularly activating SOTA summits and parks for POTA, and an SKCC member, I wanted a fun little straight key to fit in the smallest possible kit. So I made one… For portable ops, or to mount it…

Downloads
382
Likes
64
Rating
5
P
PrintablesKuna

Voron Stealthburner CW2 EBB36 cable door with fan

closed cable hole on top added 30x30 fan with mouning holes Now nicely closing all cables with the EBB36 mod on Stealthburner.

Downloads
381
Likes
57
Rating
0
P
PrintablesFunky Dysfunc

Buck Converter USB Case HCW-P715

One base with screw holes, one without. The lid should be orientated so the lugs don't push on the capacitors. 0.20mm, shouldn't need supports.

Downloads
376
Likes
39
Rating
4.67
P
PrintablesSven Kah

Voron Stealthburner CW2 PG7 Mount

Just a simple mount for a PG7 - fits CW2 Used it with the BTT EBB 2209/2240. May fit other boards aswell. 1x heat set insert (Standard Voron) and 2x M3x8 SHCS needed.

Downloads
372
Likes
24
Rating
5
P
PrintablesTommmy47

Airsoft Adapter 12mm CW to 14mm CCW

I'm re-designing it because I needed a 14mm CCW inside.

Downloads
359
Likes
22
Rating
0
P
PrintablesPbourgui

Dewalt DCW600 base

This router base will assist you in routing grooves at an equal distance from the edge of a board. I used two screws, washers and handles that I had on hand. The screws are ¼ inch 20.

Downloads
357
Likes
93
Rating
5
P
PrintablesHadrik.

Stealthburner CW2 EBB2209 CAN PUG (Umbilical)

Use with the CW2 cable bridge.stl from BTT. Too big to work with the regular cable cover so i added a cutout. You'll have to print it with supports. Add two M3 heat-set inserts into the clamp. Secure with M3x16 screws (or longer, but they…

Downloads
352
Likes
44
Rating
0
P
PrintablesMichsiv

Stealthburner CW2 Umbilical mount (all cables)

Same setings as Voron parts. It needs supports for print!

Downloads
349
Likes
36
Rating
5
P
PrintablesCNC Kitchen

AEG AXP26U338CW ChillFlexPro 2-hose conversion

AC shroud to convert the one-hose AEG AC to a two-hose AC for better efficiency. Fits a 125mm intake hose. Also includes the 3D scan of the back.

Downloads
332
Likes
27
Rating
4.5
P
PrintablesAgent Mess

Discworld Bookmark

This simple bookmark features a representation of Great A'Tuin and a quote by Terry Pratchett. The design of the Great A'tuin was inspired by the works of Paul Kidby. More of his works can be found at: https://shop.paulkidby.com/featured/

Downloads
328
Likes
65
Rating
5
P
PrintablesFaceHaver

Prop Bottle Silencer adaptor - PCO1881 to 14mm CCW / 1/2-20 UNF thread

Little part to fit a plastic bottle to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While a big bottle has a…

Downloads
325
Likes
38
Rating
5
P
PrintablesMatyas2603

Cyma Glock 18C Tac Rail and 14mm CCW Barrel

Cyma Glock 18C Tac Rail and 14mm CCW Barrel

Downloads
319
Likes
52
Rating
5
P
Printableshidara

Voron Stealthburner CW2 E3D V6 Revo printhead bracket (Aliexpress)

BETA The printhead brackets supplied at Github allows for pressure fit around the neck. However there is a tiny bit of wiggle in this mount but the Aliexpress version also allows for removal of the neck to expose M2.5 bolt holes. These…

Downloads
317
Likes
39
Rating
5
P
PrintablesIconic FAB

Horizontal chain mount for Voron Stealthburner (CW2)

Forget flimsy CAN wires free flying around your Voron's enclosure. This is the mod solving the issue the way Bambu Labs X1 does it. Check this mod in action here: Recommended print settings Extrusion width: 0.4mm, forced Layer height:…

Downloads
314
Likes
88
Rating
5
P
PrintablesSchumo

Mini Wheels - CCW Classic

I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…

Downloads
309
Likes
49
Rating
5
P
PrintablesTiskoviny.EU

Discworld: Ankh-Morpork (Boardgame pieces)

EN: Boardgame pieces for the Discworld: Ankh-Morpork These are faithful copies of wooden figures for a board game that no longer exists today, which expired due to the revoked license. If you need to replace a piece or would like to…

Downloads
306
Likes
44
Rating
5
P
PrintablesJP

HCW diagonal easy connector

an easy way to connect two hcw panels or just to have two inserts

Downloads
304
Likes
55
Rating
5
P
PrintablesPrusa Research

CW1S Printable Parts

Printable parts for your Original Prusa CW1S Curing and Washing machine. Print instructions PrusaSlicer's default PETG 0.2mm presets. For the HEATER FLANGE CW1S_ASA part, please use Prusament ASA filament as it has a better thermal…

Downloads
302
Likes
30
Rating
0
P
PrintablesMC1457

EBB CW2 cable bridge for drag chain

Remix to add a drag chain mount. For Switchwire with EBB SB2240_2209 CAN bus adapter, specifically to allow a drag chain for use with Beacon bed probe rather than umbilical. This is a new mix that has not been tested yet! There are two…

Downloads
299
Likes
41
Rating
0
P
Printablesanp27

Dewalt DCW210 Cordless Sander to Festool Cleantec Adapter

Dewalt DCW210 Cordless Sander to Festool Cleantec Adapter This adapter allows a Festool Cleantec dust extractor to be used with the Dewalt Cordless sander (O-Ring also required). This sander is generally a good design with the exception…

Downloads
297
Likes
29
Rating
0
P
PrintablesKajasX

Trimming jig for DeWalt DCW600

Adapter that allows the protruding parts to be milled into a plane. The adapter snaps into place on the original base. Assembly and disassembly is a matter of seconds. At the end of the adapter is a spherical handle that helps stabilize…

Downloads
281
Likes
120
Rating
5
P
PrintablesKajasX

circle jig for Dewalt DCW600 DCW 604

Circle jig for Dewalt DCE600, DCW604, which is easy to snap onto the contact surface of the original base without any tools and can be milled with even small circles. It is necessary to screw the M5 screw without a head into the sliding…

Downloads
277
Likes
50
Rating
4
P
Printablesmladendeni

Airsoft 14mm CCW thread cap

This is a thread cap (protector) for airsoft rifles (AEGs). It could be screwed on the threads whenever you are not using suppressor or flash hider. It has 14mm CCW thread (left-hand). Total height: 11mm Diameter: 25mm The idea behind…

Downloads
277
Likes
23
Rating
0
P
PrintablesHanzovski_

12mm cw to 14 ccw - remix

Extendet 12mm thread, I had problem with durabilyty in this place. Slightly shortened 14mm thread, didn't fit my tracer unit. This is my first work with threadet think in 3d programm, so don't except something excellent.

Downloads
276
Likes
19
Rating
5
P
PrintablesAdam Kimmerly

Big Knob Portable CW Morse Code / Telegraph Key

BACKGROUND: As an avid portable HF operator, regularly activating SOTA summits and parks for POTA, and an SKCC member, I wanted a fun little straight key to fit in the smallest possible kit. So I made one… then I modified it for better…

Downloads
271
Likes
32
Rating
5
P
PrintablesGeorge-Corrigan

Dewalt Router Mount DCW600

This is mount for the Dewalt Router DCW600. This can be mounted with screws or pegboard. The second model is for the pegboard clips. -- This prints on its back with supports (for the peg clips), brim is optional. Category: Organization

Downloads
268
Likes
47
Rating
5
P
PrintablesH6K2L8

CCW 14mm airsoft silencer

I got the idea from Novritsch Modular Suppressor V2. Made it to fit in the holster with a pistol. This is 10cm long and it's threaded in 14mm CCW. Holes for M3 bolt and nut to tighten it well in place. This is for looks only! I printed…

Downloads
266
Likes
28
Rating
0
P
PrintablesKaybee

Slice Mosquito Mod for the Voron Stealthburner Final Release with CW1

Here is a quick edit I made to use a Mosquito Hotend with the final release version of the Voron Stealtburner with CW1. I have been using another Mosquito Stealthburner mod that was based on the beta 3 version but decided to mod the final…

Downloads
261
Likes
15
Rating
0
P
Printableslance greene

Transformers CW sunstreaker gunsword

a replica of the Transformers CW sunstreaker gunsword for transformer toys. Best printed on an SLA/DLP 3D printer. Check out all of my transformers guns! Transformers CW sunstreaker gunsword - https://www.thingiverse.com/thing:3693685…

Downloads
260
Likes
39
Rating
0
P
Printablesmilspecmoehring

XM177E2 Flash Hider for 14mm CCW

Airsoft Muzzle device inspired by the infamous Muzzle Device used on the XM177E2. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 0.15mm Layer Height 100% Infill If you need anything, feel free to…

Downloads
258
Likes
29
Rating
0
P
PrintablesMike Froehner

Modular Airsoft Silencer V2 - 14mm CCW - with different skins - completly parametric.

last update 24.02..2025 Hello and welcome to the second iteration of my modular silencer with different skins. If you like you can tip me via paypal: https://paypal.me/crazYm1nd ---------- description This is a complete refactoring of the…

Downloads
251
Likes
28
Rating
4
P
PrintablesFlameintherain

CW Arrow tick arrows

I haven't printed this yet but I'm hopping the friction will hold this in place so it can be removed from the arrow I'm using (edit) V2 files are intended for the bottoms to be formed around my arrows with a heat gun Print Settings Rafts:…

Downloads
250
Likes
42
Rating
0
P
PrintablesEszOzwierz

Gas L96 - Well G96 Project (Front rail and 14ccw adapter)

Hello there, As i really liked my SRS i have tried my luck with Gas Sniper, a classic, WELL G96 (ARES AW338 Compatible) which have some non-standard solutions for todays airsoft standards. First model which i have designed is simple 14ccw…

Downloads
250
Likes
46
Rating
0