Search results: dfr

Sort order

Counting matching models…

P
PrintablesMava

IKEA Trådfri - Wireless motion sensor mount

Adjustebel wall mount for IKEA Trådfri wireless motion sensor. Extra parts 3xM3 8mm countersink screws and 3xM3 nuts. Glue sensor holder to lid Print instructions Model is drawn to fit in two M3 nuts internal. On 0.15mm it will be on…

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant

Downloads
280
Likes
35
Rating
4.8
P
Printablesices

IKEA Tradfri Motion Sensor Corner Mount

🇬🇧 IKEA Tradfri Motion Sensor Corner Mount A holder to mount an IKEA Tradfri motion sensor in a corner. The sensor is simply plugged onto the holder. The holder can be glued into the corner, but also has a hole for a countersunk screw. 🇩🇪…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
214
Likes
24
Rating
5
P
PrintablesSev

DFRobot Mini Router Case

This case fits the following combination of parts: Raspberry Pi Compute Module 4 IoT Router Carrier Board Mini (https://www.dfrobot.com/product-2242.html) Waveshare 19623 CM4-HEATSINK Raspberry Pi Compute Module 4 Four 15x2.5mm standoffs…

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
154
Likes
10
Rating
5
P
PrintablesAndrew

Ikea TRÅDFRI Shortcut-Button adapter to Jung AS500 series

Small adapter to mount a Ikea TRÅDFRI Shortcut-Button to JUNG AS500 frame (Rahmen 3-fach Jung AS500 583 WW alpinweiß). I use a 6mm magnet to hold the button in place and 4 screws (M3 6mm) to fix the adapter into the Jung AS500 frame. Have…

Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
8
Rating
0
P
PrintablesCookieBerlin

Light switch Jung AS500 Ikea TRÅDFRI

This design combines two IKEA TRÅDFRI with a Jung AS500 light switch. Two 14mm x 4mm magnets are glued to the back to hold the TRÅDFRI. For printing I used white PLA and glued both parts together, otherwise it wouldn't have fit on my…

Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
0
Rating
0
P
PrintablesPieter Koenen

Magnetic fixture for the Tradfri Movement Sensor of IKEA

Magnetic Fixture for the Movement Sensor of IKEA A light weight but strong solution for fixing IKEA's movement sensor to a steel surface. This use case is for magnets sized 9.8 mm in height and 6 mm in diameter. Create your own model…

Print approx. €0.44–€0.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
8
Likes
1
Rating
0
P
PrintablesThomas

Arduino Uno + DFRobot LCD Shield Case

This is a small case for an Arduino Uno with the DFRobot LCD Shield. It has some extra space to one side to store some small additional circuits inside plus there's an opening for external wires. Mount the shield and top/bottom case parts…

Downloads
914
Likes
57
Rating
4.67

Adapterplatte für die RT0700 Makita Einhandfräse

Hier ist meine Version einer Adapterplatte um die beliebte Makita Einhandfräse mit der Makita Führungsschiene sicher führen zu können. Ich habe es in PETG gedruckt. Sollte aber auch mit ABS/ASA gut funktionieren.

Downloads
353
Likes
81
Rating
0
P
PrintablesStina
Downloads
322
Likes
43
Rating
4.92

Articulated mount Ikea Tradfri motion sensor (PIR E1525/E1745)

The 3D printed mount is designed to perfectly fit the Ikea Tradfri motion sensor, ensuring a snug and secure fit. Whether you prefer a more permanent installation with screws or a flexible and removable option with magnet, this 3D printed…

Downloads
316
Likes
42
Rating
5
P
PrintablesSkeleton Dan

Godfrey from Elden Ring

Godfrey from Elden Ring in his casual outfit, not in boss form

Downloads
302
Likes
36
Rating
0

TRÅDFRI lysdæmper til FUGA vægkontakt

Konvertere en IKEA TRÅDFRI ON/OFF knap til at ligne en FUGA IHC Wireless vægkontakt. Ingen lodning nødvendig. Jeg sælger ikke disse kontakter, men en lignende løsning kan købes hos LAB3D . Dele du skal bruge 1 x Indsats, vælg imellem 4…

Downloads
258
Likes
30
Rating
5
P
PrintablesWegBier

Tradfri On/Off Switch Skadis Mount

An IKEA Skadis mount for the Tradfri On/Off Switches. The base plate from the Tradfri switch is screwed onto the Skadis holder with two M3 nuts and bolts, I used M3x6. You could also just use the provided double-sided tape to fix the base…

Downloads
220
Likes
68
Rating
4.67
P
PrintablesBridget

DFROBOT Baron car robot chassis modified top levels

This exists because I am procrastinating on making progress with python, Linux and learning to better utilise my pis. I have driven this around my house using a pi & Adafruit motor hat like a little FPV car, controlling it from my PC, and…

Downloads
211
Likes
24
Rating
0
P
PrintablesSerhan KIYMAZ

Protective Enclosure for DFRobot FireBeetle 2 ESP32-E

Enhance the safety and aesthetics of your FireBeetle 2 ESP32-E with specially designed 3D-printed case! Tailored to fit both header-equipped and headerless boards, this case offers robust protection while maintaining easy access to…

Downloads
209
Likes
11
Rating
0
P
Printableseggy

Floyd Bedframe Stands

Didnt print or test out anything yet, just recreated the hardware with some reinforcement. also included are the Fusion360 files. Spots for wood slats are sized for 1.5in. Dips for the ratchet straps are 1in wide. You can find info about…

Downloads
185
Likes
9
Rating
0
P
Printablesuli_2035

Waveshare 7.5 inch ePaper case for DFRobot Firebeetle

This is a remix of " WaveShare 7.5" e-Paper case - symmetrical borders " by ASW. Charging can be done via USB port without opening the frame. Additionally, a tilted version is available. Update 2024_10_09: Added the forgotten…

Downloads
179
Likes
15
Rating
5
P
PrintablesMalte

Massage Bedframe/Mattress Headrest

A headrest for bedframes and mattresses works with both professional headrest pillows, travel pillows and rolled up towels. Can be disassembled for storage and transportation. Attention: For the bedframe mount you ll need to check your…

Downloads
177
Likes
35
Rating
0
P
PrintablesTritschi

Filter Opening Tool for WaterFilter "Drufi DFR"

Friend of mine asked for help, he could not open the water filter. So I designe one from scratch. Here it is: TinkerCad → first excerpt printed in PLA, low perimeters, low height. It fitted right at the first shot. A little bit refined,…

Downloads
173
Likes
4
Rating
5
P
Printablesgsatelite

Arduino Ultrasonic sensors, Generic and DFRobot module adaptors R.1

Arduino Ultrasonic sensor adaptor. 2 models: Generic and DFRobot module

Downloads
146
Likes
9
Rating
0
P
PrintablesDrDice

FUGA IKEA Trådfri adapter

Der findes mange smarte IKEA Trådfri adapter til LK Fuga serien. Dog syntes jeg at de enten ikke var "åbne" nok, så man skulle sidde og fedte med at modificere stl filerne, eller også var det for omstændigt at skulle bestille en masse…

Downloads
144
Likes
9
Rating
0
P
PrintablesKahera

Case for ESP32 C3 super mini + DFRobot mmWave Radar (SEN0395)

A small box created to fit a ESP32 C3 super mini + DFRobot mmWave Radar (SEN0395), in my case for use with ESPHome. It has a snap fit lid with slots to make it easier to get off again. I've added my parameterized Fusion360 file for easier…

Downloads
143
Likes
10
Rating
0
P
PrintablesTony Lehnert

Tradfri Switch Desk Stand

This is a desk stand for the Tradfri on/off switch. I made two versions. One fits the switch with its metal base plate, the other fits the switch without its plate.

Downloads
139
Likes
39
Rating
4.75

Fox Racing Speedframe Improved Visor GoPro Mount

This replaces the stock Fox Racing Speedframe GoPro visor mount with one that uses zip ties. I recommend printing in TPU 95A at .16 Optimal with 5 wall loops (P1S). This makes the upper part solid, but allows the bottom to conform to the…

Downloads
138
Likes
7
Rating
0
P
Printableskaufi

Adapter switch Ikea TRÅDFRI / ABB Tango

telo.stl = spodek.stl + ramecek.stl Adapter switch Ikea TRÅDFRI / ABB Tango https://3dwarehouse.sketchup.com/model/748550cf-a6cd-469e-9de8-4ecc606f8e29/Adapt%C3%A9r-Tr%C3%A5dfri-ABB-Tango Print instructions Category: Household Summary…

Downloads
135
Likes
26
Rating
4.75

Ramme til FUGA med plads til IKEA TRÅDFRI knap

IKEAs firkantede fjernbetjeninger er lidt for store til FUGAs rammer. Derfor har jeg lavet disse rammer. De passer til: Genvejskontakt Trådløs lysdæmper Fjernbetjening til rullegardiner Husk at plastik skrumper når det køler ned. Derfor…

Downloads
134
Likes
27
Rating
5
P
PrintablesInspector5

Fox Speedframe Flat GoPro style mount

Couldn't find a good mount for my helmet/light combo. So instead of using a bunch of zip ties or twist ties, I modeled one in Fusion 360. It's a flat style GoPro mount that sticks on with double sided tape where the vizor meets the…

Downloads
127
Likes
21
Rating
5
P
PrintablesChristoph

Griff Nordfrost Gefrierschrank / Nordfrost freezer handle

Handle for Nordfrost Freezer - might work for other freezers as well hole to hole distance = 140mm __________________________________________ Griff für Nordfrost Gefrierschank Lochabstand 140mm Print instructions Category: Replacement Parts

Downloads
122
Likes
4
Rating
0
P
Printableszadak

CardFrame | Toploader Card Frame & Stand

A minimal frame and stand for trading cards in toploaders with a precise, secure fit and no added bulk. Currently only testet with Ultra PRO toploaders. Just added v2 that improves the fitment a bit. Tested Print Settings PLA 0.4 mm…

Downloads
118
Likes
10
Rating
4
P
PrintablesNiko

IKEA Tradfri Dimmer switch mount

This IKEA Tradfri dimmer holder serves two purposes. - mount the Switch to the wall - avoid switching off the power with the “old” wall switch GIRA brand Wall switch with an opening of 55mm x 55mm It's designed to work with a 6mm magnet…

Downloads
118
Likes
19
Rating
5
P
PrintablesKall0

Ikea remote controller covers (Trådfri, Styrbar and Somrig/Rodret)

Lightswitch covers to cover your existing switches with covers that fit different Ikea remote controllers. Use the magnetic cover that comes with the remotes. Designed to be used with this holder…

Downloads
117
Likes
7
Rating
0
P
PrintablesMalte

Bedframe Massage Headrest Version 2

Version 2 of my headrest for bedframes and mattresses works with both professional headrest pillows, travel pillows and rolled up towels. Now more sturdy and and with a lip to hold towels and travel pillows in place. Can be disassembled…

Downloads
115
Likes
19
Rating
0
P
PrintablesMirko

IKEA TRADFRI Motion Sensor Angled Corner Mount and AAA tray

I hacked these parts together as I needed a battery tray and an angled corner mount for my IKEA TRADFRI motion sensor This is the AAA conversion mount. My tray fits inside the mount. Wire the batteries in series so you get +3 Volt.…

Downloads
114
Likes
35
Rating
5

IKEA Tradfri Shortcut Button Holder

Print Settings: PLA 0.2 0.4 Nozzle no supports

Downloads
111
Likes
7
Rating
4.5
P
Printablesfrankyp

DFROBOT Solar Power Manager carrier

Carrier for the DFROBOT Solar Power Manager 5V

Downloads
109
Likes
10
Rating
5
P
PrintablesNate15329

gridfinity5x5-drawer-solidfront

Tired of drawer handles breaking the front honeycombs during assembly? If so, this eliminates this issue by filling the front drawer side solid.

Downloads
106
Likes
10
Rating
0
P
PrintablesTommi

Tradfri switch ON/OFF

You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL

Downloads
105
Likes
11
Rating
5
P
Printablesreboot81

Ikea Trådfri Driver Holder

Holder for Ikea Trådfri driver 503.561.87/603.426.56 First created design ever. Printed in 0,3 PETG, Perimeters: 4. 10W driver only needed one holder. 17,8x54,7mm inside dimensions.

Downloads
103
Likes
13
Rating
5
P
PrintablesshakeNbake08

IKEA Tradfri Remote Stand

Dock to place the IKEA Tradfri remote on a table top instead of mounting to the wall I used a 6x2mm magnet (other sizes will fit) and a M8x20 screw, and 2 M8 nuts. Glue the magnet into the top of the cavity of the main components Screw…

Downloads
101
Likes
28
Rating
5
P
PrintablesSuperDave

Camera Case for DFRobot 8Mp Camera

A simple case for the DFRobot 8 Megapixels USB Camera, that i am currently using for my Octoprint webcam. You will need one small 2.5-3mm self tapping screw to mount the tab to the case. I o designed it to mount to any of the many…

Downloads
100
Likes
5
Rating
0
P
Printablesmintonette

IKEA Tradfri Button Holder for Skadis

Slots firmly into the IKEA Skadis pegboard. Fits both the Tradfri shortcut button and 2-button dimmer; both are the same dimensions. Uses the existing metal bracket and adhesive which come with the button. Recommend printing face up with…

Downloads
91
Likes
23
Rating
4.5
P
Printablesgrosdode

Ikea Tradfri Styrbar wallmount

Holder to mount the Ikea Tradfri Styrbar to a wall. Hole pattern also fit a German (Unterputzdose). You need two additional Magnets or iron plates 20mm x 6mm x 1.5mm to hold the Styrbar more save. just press or glue the magnets (iron…

Downloads
88
Likes
8
Rating
0
P
Printableshosebei

DFRobot Beetle ESP32 Case

See also the FreeCAD File if you would like to change something.

Downloads
86
Likes
1
Rating
0
P
PrintablesHybridkunst

Case for URM37 Ultrasonic Distance Sensor from DFRobot with Interface to Servo

For my first robot project I want to use the URM37 ultrasonic distance sensor from dfrobot. So the first thing to do was to design a good housing for the sensor and make it attachable to a servo. Category: Robotics

Downloads
84
Likes
8
Rating
0
P
PrintablesStuart800

T250 Split Legs and Split BedFrame

First of all, a big thank you to Matt for the outstanding development work on the world's fastest printer (accelerated by Volgger to WR), the T250. On the T250, the four legs are so high that not everyone can print them. I split the legs,…

Downloads
82
Likes
19
Rating
0
P
PrintablesTomas Rendek

Ikea tradfri button cover - Doorbell

Doorbell cover for Ikea home smart shortcut button. https://www.ikea.com/cz/cs/p/tradfri-rychly-vypinac-bila-40467765/ Print with supports, then carefully remove it. Sliced for two colors (black last 4 layers).

Downloads
76
Likes
11
Rating
5
P
PrintablesKagnaw

Tradfri switch holder

Ikea Tradfri (Trådfri) light switch & Shortcut button holder. That fits the Skadis (skådis) "peg bord" There seems to be two versions of the metal backplate, they changed the "slot hole" it should fit both. Its purposely made quite thin…

Downloads
76
Likes
28
Rating
5
P
PrintablesSebazzz

IKEA Tradfri remote template

Purpose I had a spare IKEA Tradfri remote lying around, and wanted to turn it into shortcut buttons. I didn't find any suitable template to start with, so I created my own. Usage Either: Load the STEP/F3Z in your favorite CAD tool Use…

Downloads
76
Likes
21
Rating
5
P
Printablesivosak

Tradfri ON-OFF Switch cover

I have bunch of TRÅDFRI on-off switches at home and because of children it become mixing so I was unable to recognize which switch drive what, so decided to make custom enclosure. Use thin flared screwdriver to remove original top case…

Downloads
76
Likes
15
Rating
5
P
PrintablesBOSSailing

Tradfri remote controller holder | IKEA SKADIS |

Print it and remove the support. You need just to slide the controllers magnet holder to the hook, then put it onto the skadis wall panel. Printing settings: 15% infill Support enabled 0.2 layer height

Downloads
74
Likes
12
Rating
5
P
PrintablesEdurobot

Ikea Trådfri Omlopp bracket for Prusa Mk3

Simple and dirty support bracket for Ikea Trådfri Omlopp light, for Prusa Mk3/Mk3S

Downloads
72
Likes
11
Rating
3.5
P
PrintablesOrg like a pro!

IKEA Tradfri Motionsensor stand

A simple stand for the IKEA Tradfri Motionsensor

Downloads
71
Likes
10
Rating
4
P
Printablesjackharvest

Bed Shelf (U Channel Press Fit) with Cable Organizer for 2x4 Bedframe

Leesherm takes the cake here - its a great shelf. I Remixed it to fit a 2x4 bedframe (I build a triple bunk bed myself, and the frames are all 2x4's (...which are actually 1 1/2 x 3 1/2, but whatever; Thanks wood industry). I used a…

Downloads
71
Likes
13
Rating
0
P
PrintablesKongolasse

Wall mount tilt swivel holder for TRÅDFRI motion sensor

This is a tilt swivel holder for the motion sensor “TRÅDFRI” from IKEA. You can mount it with screws or use double-sided tape that comes with the sensor. This makes it much easier to aim and set the sensor more precisely. Edit: Maybe try…

Downloads
71
Likes
9
Rating
0
P
Printablesilei.ol

IKEA Tradfri Shortcut-Button Wall Mount / Wandhalterung

This Tradfri Shortcut-Button wall mount is designed to be placed on any wall in your home. A magnet is used to hold the button. Double-sided tape is used to mount it to a wall. The cut out in the center of the back is for the magnet. The…

Downloads
68
Likes
7
Rating
0

osVAC - Makita DRT50 Akku - Einhandfräse

Für den Anschluss an unsere Absaugung nach dem osVAC-Standard wurde diese Adapter angepasst. Sollte aber auch auf Makita RT070x - der 230 Volt Variante - passen.

Downloads
66
Likes
6
Rating
0
P
PrintablesLeMartini

dfrobot BNO055 enclosure

4 brass insert nut M3 4 M3 1.5cm screw 1 test board 2 5x1 female header

Downloads
66
Likes
2
Rating
0
P
Printablesjakkra

IKEA Trådfri Wireless dimmer case

Note that it requires some Fusion 360 knowledge of Fusion 360 to change the text to whatever you want.

Downloads
66
Likes
12
Rating
0
P
PrintablesDJ

Ikea Tradfri switch holder

This model holds your Ikea Tradfri switch in place. First I created 1 model with an angular exterior (which in my case holds the switch even better). For other folks I also created ones with a flat top. Tradfri-swtich-holder 7 mm height…

Downloads
65
Likes
11
Rating
5
P
PrintablesMartinPP

lightswitch cover for TRADFRI IKEA smarthome switches and buttons

lightswitch cover for TRADFRI IKEA smarthome switches and buttons. Stop your familymembers and friends from turning off your smart lights the wrong way! No tools required!

Downloads
64
Likes
16
Rating
0
P
Printableszadak

CardFrame | Graded Card Slab Frame & Stand

A minimal frame and stand for graded trading card slabs with a precise, secure fit and no added bulk. Currently supports PSA-sized slabs only. Additional slab types will be added later. Tested Print Settings PLA 0.4 mm nozzle 5% infill No…

Downloads
64
Likes
5
Rating
0
P
PrintablesSwesen

IKEA trådfri dimmer exxact

Snaps into the empty frame of an Schneider exxact. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0.2 mm Infill: any Category: Household Supplies

Downloads
64
Likes
8
Rating
0
P
PrintablesSpin360

Item Holder for IKEA Malm Bedframe (or any bedframe with 40,5mm thickness)

Need a holder for all your small accessories that you might need right before sleeping? You wake up with dry lips and don't want to search for your lip balm in a drawer or from the bedside table where you accidentally tip it over and it…

Downloads
62
Likes
11
Rating
0
P
PrintablesMichal

TRADFRI Remote mount

min thickness is 2mm magnet: d6mm x 2mm

Downloads
61
Likes
8
Rating
5
P
PrintablesFuWeissinger

Jung Schalter Blende für z.B. Ikea Tradfri

Du kennst bestimmt das Problem, wenn Du nach dieser Blende suchst 😉. Jemand hat den Lichtschalter betätigt und jetzt ist die SmartHome Lampe stromlos. Mit dieser Blende kann man den Schalter einer Jung Dose überdecken, sodass der Schalter…

Downloads
60
Likes
7
Rating
0
P
PrintablesMattittas

IKEA Trådfri to ELKO RS16

Designed to be printed with supports. I recommend enabling ironing on the topmost layer. The adapter plate snaps into the frame with little force, making a rock solid connection. While searching, it appears this remote/dimmer is now…

Downloads
60
Likes
11
Rating
5
P
PrintablesScartsjer

Ikea Tradfri sensor holder

Ikea Tradfri sensor holder using the supplied tape from Ikea to mount to this holder. now the sensor is removable without tools needed. Print at 0.1mm max. Depending on printer the the tolerances might be a little tight. But it Al's need…

Downloads
58
Likes
8
Rating
1

tradfri led driver screw mount

Mounting bracket for tradfri led driver. This is for the driver that is compatible with the smart home app from IKEA. It has 2 5 mm holes for screws, so you can screw it to the bottom of a desk, for example.

Downloads
56
Likes
7
Rating
0
P
Printablestn00364361

DFRobot CM4 Router Board Case

To assemble the case, you will need: Four M2.5x10 standoffs Four or eight M2.5x6 screws (optional) Four 1.6mm spacers between the CM4 and the router board Print settings: Material: PETG Layer height: 0.2mm Walls loops: 3 Top/bottom…

Downloads
56
Likes
1
Rating
4

Bedside Table with Bedframe mount.

This Bedside Table mounts itself to the side beam of Beds. The slot is Angled to Clamp to slightly differing Sizes, but around 28mm is Optimal. Adding some Anti-Slip Furniture Pads to the inside of The slot achieves a really satisfying…

Downloads
55
Likes
13
Rating
0
P
Printablesangrygriffin

Remixed HP Flex IO V1 Ethernet Mount for DFRobot Intel 2.5gig A+E card

I used BHCS M3x8 bolts to affix the card to the print, and made the existing holes smaller so that the M3 bolts thread into them. Using BHCS bolts meant that the bracket for the top case retention screw has to be bent a little; this may…

Downloads
55
Likes
6
Rating
0
P
PrintablesModel Magic

Cool Hand Luke - Boss Godfrey - 1967

Cool Hand Luke - Boss Godfrey - 1967

Downloads
55
Likes
10
Rating
0
P
PrintablesH3dSprint

Tool to replace filter of Drufi DFR

To use the printed tool, I recommend a pipe or a shaft with a diameter of 16mm out of stainless steel or any other metal material. Part list: printed ring | quantity: 1 printed fixing plate | quantity: 2 pipe or rod ⌀16mm | length: ≥200mm…

Downloads
55
Likes
5
Rating
0
P
Printablesleihog

Trådfri Remote holder for IKEA Skådis

A simple mounting plate for attaching an IKEA Trådfri remote (the round one) to the IKEA Skådis pegboard. The mounting plate is attached to the pegboard using a screw and a T-Nut , and the remote is attached to the plate using the…

Downloads
54
Likes
5
Rating
0
P
PrintablesAlanMG

Ikea Trådfri Gateway Wallmount

Printed with 2 walls, 15% rectiliniar infill and tree supports. Gives a nice discreet mounting option for the Ikea gateway that is still easily accessible.

Downloads
53
Likes
6
Rating
0
P
PrintablesArea51

Enclosure for Smart LED Tradfri driver, IKEA Hack

IKEA Tradfri Home Smart is a great solution for home automation. When it came to lighting the kitchen table, IKEA's driver solution was a big grey unit of only 10W (se photo) - there simply had to be a smarter solution... My solution…

Downloads
53
Likes
12
Rating
0
P

LK FUGA to IKEA TRADFRI adapter

I wanted to upgrade the apartment by replacing all normal wall switches with zigbee ones. But pleacing the new switch next to the normal one, meant that everyone kept switching off the wrong one, ruining the attempt to make the lights…

Downloads
53
Likes
7
Rating
0
P
PrintablesLeon

Ikea Tradis Mount for Tradfri Bridge

Mount for ikea tradfri bridge on skadis board. Printed with supports

Downloads
53
Likes
6
Rating
0
P
PrintablesNitor

DFRobot 1602RGB Box

Small box for the 1602RGB LCD from DFRobot. Requires: 4 x 16mm M3 screws 4 x M3 nuts Print Settings Printer: Voron V0 Resolution: 0.2mm Infill: 15% Filament: add:North PLA Notes: Not really important, print with whatever settings you have…

Downloads
52
Likes
2
Rating
0
P
PrintablesYBR

Tradfri schneider asfora

adapter for Tradfri on a Schneider Asfora shutter with a diam 10mm magnet

Downloads
52
Likes
3
Rating
0
P
Printablesarminth

Lamp shade mod for IKEA MISTERHULT and Tradfri globe

This is an addon for IKEA Misterhult lamp. If you want to use the Tradfri big LED globe, the lamp protrudes a lot from the lamp. First measure is to turn around the metal ring inside the lamphanger, which gets the globe up a bit but not…

Downloads
50
Likes
10
Rating
0
P
PrintablesRobert

Decora Wall Plate with Tradfri On/Off Switch Mount

Created a Decora Wall Mount for a single gang box that would allow for the mounting of a Tradfri On/Off Switch. I used the screws from my single decora wall plate for this new wall plate. For the Tradfri remote, I used 3mm screws and nuts.

Downloads
50
Likes
5
Rating
5
P
PrintablesAdam Strojek

Ikea Trådfri EU Light Switch Cover (Tradfri)

Recently I have changed all lightbulb at my home to Ikea Trådfri. After this change I have left with two problems: where to put remotes when they are not used and how to prevent other people from turn off light using old switch. To solve…

Downloads
49
Likes
9
Rating
0
P
Printablesfrnktrgr

HSW IKEA TRADFRI Wireless Dimmer Plate

Very simple plate to attach the IKEA TRADFRI wireless dimmer (E1743) to the Honeycomb Storage Wall with the included adhesive strip. Requires only 6 grams of filament! Print instructions No supports. My settings for PETG: Layer height:…

Downloads
49
Likes
21
Rating
5
P
PrintablesMatt Finder

Bedframe Remote Holder for Roku Remote

Printed upright with no supports. Printed originally with PLA. Part to fit bed frame is 31mm. To fit to your bed frame use cross multiply. ['your measurement' * 100% / 31mm]. This will give you your percent scale factor. REMEBER if you…

Downloads
48
Likes
6
Rating
0
P
Printableskenny.peterson

IKEA TRÅDFRI Driver Bracket

TRÅDFRI driver units only have 3 screw slots on one side, making it impossible to mount upside down under a cabinet. I originally printed this in Prusa Galaxy Silver PLA to match the body of the driver unit; at least it was close. Because…

Downloads
48
Likes
8
Rating
0
P
Printablescsicar

Tradfri Lichtschalter-Halterung

Halterung für Tradfri Schalter auf einem normalen Wandschalter. Es wird nur die Schaltplatte ersetzt. Das heißt, dass dafür der Lichtschalter nicht aufgeschraubt werden muss.

Downloads
48
Likes
5
Rating
0
P
PrintablesFreeviv

DFRobot Router Case (DFR0767)

Case for DFRobot's Raspberry Pi Compute Module 4 IoT Router Carrier Board Mini. This design uses M2.5 and M3 brass threaded inserts. They may be omitted when the hole diameter is decreased. You will need to download the design file and…

Downloads
48
Likes
0
Rating
0
P
Printableselectronlove

Raspberry Pi DFRobot 5" DSI touchscreen display

Touchscreen assembly for DFRobot 5" 800x480 TFT DSI touchscreen + Raspberry Pi and interior space for Pi HAT. Requires: 4 M2.5x20mm screws for the back of the case 4 11mm standoffs between Pi and HAT (can be printed) + 4 M2.5x20 screws 4…

Downloads
47
Likes
4
Rating
0
P
Printablesmatemaciek

Midframe for Hadley Telescope Rocker Frame and magnetic legs

The same as base, just with holes for rods through the corners. You can put it just below LTA, so it does not obscure movements. For even more stability you can add diagonal tensioners, e.g. using turnbuckles and wires. For that you need…

Downloads
45
Likes
4
Rating
0
P
Printablespixeledi

Case for BLE Sensor Beacon DFRobot

The PCB has enough space in the housing because I use various sensors in addition to the BLE beacon, all of which are different sizes. Create with solvespace have fun

Downloads
45
Likes
3
Rating
0
P
PrintablesScorpionKingdom

CPAP Mask Mount For Bedframe

Holder for CPAP mask to mount to a bedframe (up to 28mm in width). I needed a way to store my CPAP ResMed full face mask on the side of my bedframe instead of just having the mask resting on top of the drawer. This mount works for any any…

Downloads
44
Likes
3
Rating
0
P
Printablesmaui

Mini ESP32-C6 DFRobot Beetle Enclosure

As small as possible enclosure for the DFRobot Beetle ESP32-C6, with cutouts for USB and wires for connecting a ledstrip. Created for my Matter over Thread Ledstrip firmware on Github This is the ESP32:…

Downloads
44
Likes
3
Rating
0
P
PrintablesMFBocka

Ikea Tradfri Shortcut button holder

For attaching use double side tape.

Downloads
43
Likes
2
Rating
0
P
PrintablesHabit

display mount for 5" TFT DFRobot display

an adjustable display mount for the DFRobot 5" TFT display.

Downloads
43
Likes
9
Rating
0
P
PrintablesMarc

Ikea Skadis Holder for 2 Ikea Tradfri On/Off Switches

Ikea Skadis Holder for 2 Ikea Tradfri On/Off Switches (can be put up horizontal or vertically) based on the attachment style of another model which can be found either here on printables…

Downloads
42
Likes
8
Rating
5
P
PrintablesYourigh

Drawer holder for Ikea tradfri switch

Original steel backplate fits to the holder for magnetic attachment. Originally I had just a plate to stick the metal backplate to, but sometimes I'd fling the switch off to the side, so I designed this better holder. Print: requires…

Downloads
42
Likes
4
Rating
5
P
Printablesdan_g

SYR Duo DFR - Water Filter Wrench/Tool

i needed a Wrench to Change the Filter Element of my Freshwater Filter. the New filter came without a Tool. This Design is based on the Orignal Purchasable Tool (2350.00.906 - 2012 and newer) Printed With esun Light PLA. Took about 1.5…

Downloads
42
Likes
4
Rating
0
P
PrintablesPetri

Dimension mock-up for Ikea Trådfri motion sensor

Dimension mock-up of the newer Trådfri motion sensor. I haven't yet decided on how to mount mine so created this for any holder/stand planning. Trådfri_motion_sensor_with_tolerances.stl has 0.1mm dimension tolerances for easier use as a…

Downloads
41
Likes
3
Rating
0
P
PrintablesTyler Camp

Case for DFRobot Fermion 3.5" Display + FireBeetle 2 ESP32-E

Designed in Onshape: https://cad.onshape.com/documents/154f6352c0684ad1f6c7c213/w/fc14bd7f4f4cbd5dd5e331f6/e/c244bb19735c4b2673d084b6?renderMode=0&uiState=63bde45d48f6084327e491f7 Display: https://www.dfrobot.com/product-2107.html ESP32…

Downloads
41
Likes
4
Rating
0