Search results: dif

Sort order

6,019 models

P
PrintablesDynamite

Rotating 4 rings toy Fidget Sphere different patterns

I wanted to strech my knowledge of the 3D design software and I always like a nice fidget. Especially a fidget which suites 3D printing very well. These sphere can easily be printed without supports. After printing it needs a bit of…

Print approx. €5.37–€6.56 excl. taxPreliminary estimate for one variant

Downloads
8,959
Likes
1,310
Rating
4.81
P
Printablesfifindr

Fidget Ring Spinner (11 Different Sizes)

Use random seam position + classic wall generator. A simple wearable fidget ring that works as a spinner, allowing the outer ring to rotate smoothly around your finger. Designed as a compact and discreet fidget toy for everyday use,…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
4,460
Likes
576
Rating
4.78
P
PrintablesBSP.Creations

Tri-Holder - Holds Your Phone At 3 Different Angles

This phone holder is designed to hold your phone vertical or horizontally at three different angles: 60, 70 or 80 degrees. The holder comes in 2 different models, the lightweight or infilled model. The lightweight model prints on its side…

Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant

Downloads
2,696
Likes
388
Rating
4.88
P
PrintablesPrism08

RC CAR Differential #3

This time it's a full redesign including the gears… And obviously in order to reduce the size, I had to make some compromises. So I no longer use ball bearings for the spider gears which are now directly on a tiny PLA axle. As the spider…

Print approx. €2.78–€3.39 excl. taxPreliminary estimate for one variant

Downloads
1,636
Likes
192
Rating
5
P
PrintablesPrintedGuy

Customizable pixel box on desk v2.0 - different sizes

Hi everyone again! Thank you for a lot of ideas, comments, feedback and downloads of my (silver winner in design contest ): v.1 Pixel Box project ! I'm so sorry you that you had to wait so long, but after a loooot of working, testing and…

Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant

Downloads
1,593
Likes
977
Rating
4.93
P
PrintablesArne S

Beer bottle holder for the fridge (different bottle types available)

This print holds six bottles of beer in your fridge and prevents them from rolling around. The model can be used sideways or upright depending on your needs. Perfect if you need to keep a six pack of bottles chilled but with the least…

Print approx. €8.04–€9.82 excl. taxPreliminary estimate for one variant

Downloads
1,361
Likes
296
Rating
4.92
P
Printablesblmak

Water diffuser for garden

I designed this water diffuser to avoid the holes created in the ground when watering, it allows to use higher flows. Its designed to be connected to a water quick connect. I printed it standing up with quick release connector facing…

Print approx. €3.89–€4.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,281
Likes
408
Rating
4.92
P
PrintablesPrism08

Differential #5 with limited slip RC Unimog edition

06/01/24: I have released my UNIMOG RC Chassis (model U5023 - 2014) at 1/10 scale . Remixed for my Unimog RC design (in progress). See my Diff #4 for mounting instructions. You need 8 MR63ZZ ball bearings per differential (for Unimog 16…

Print approx. €5.45–€6.66 excl. taxPreliminary estimate for one variant

Downloads
1,068
Likes
247
Rating
5

Würfel Cube Puzzles, 3 Difficulties, Enlarged, Labelled, Improved Tolerances

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a remix of Cube-Maker's…

Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant

Downloads
1,051
Likes
314
Rating
4.91
P
PrintablesDusanJ

RC car differential

See attached .3mf project for information how to print particular parts or print them all in one.

Print approx. €6.53–€7.98 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,013
Likes
247
Rating
3.5

The PrusaWatch - Individually modifiable Band / Strap in for watches in TPU

The PrusaWatch - Individually modifiable band/strap in for watches in TPU As you can see, I decided to create a watch strap. There are many straps, so I wanted to design one that stands out from the rest. The result is the PrusaWatch…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
985
Likes
199
Rating
4.89
P
PrintablesSASSy Design

Crystal Tower - Light diffuser Lantern

A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant

Downloads
887
Likes
385
Rating
5
P

Tamiya TT01 wheel hexes [different widths]

Welcome, all RC enthusiasts! One of the reasons the TT-01 is a great beginner chassis is the absolute lack of suspension adjustability - you can't mess up the setup this way. However, the chassis is rather nervous and tend to oversteer,…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant

Downloads
504
Likes
75
Rating
5
P
PrintablesAku N

RC Tank T-34 PS. 231-1 Part 6 dual differential gearbox

https://youtube.com/playlist?list=PLcrufmroGYFnFEDnIxH_HovsyGvH1X6Ub Please make part number 1 “Traks" first because it is the most challenging assembly. https://www.prusaprinters.org/prints/99893-rc-tank-t-34-ps-231-1-tracks This section…

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
441
Likes
46
Rating
0
P
Printablesjoanvdp

LED diffuser grid for ws2812b strips display

LED diffuser grid for ws2812b strips (60 leds/meter) display. I would recommend to print it 0.2 layer height, print the 3 first layers with white PLA then change filament to black. Pictures are from 4 8x8 grid glued together for a 256…

Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant

Downloads
333
Likes
62
Rating
5
P
PrintablesKevin Barker

100° Modified Hinges for Modern Gridfinity Case

Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…

Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
327
Likes
97
Rating
4.78
P
Printablesgillis

Sealable Box With Many Different Compartments

This model is for bed size 210x210 Do not scale down the model because the hinges will not work! If you have a Prusa Mini then visit this page instead https://www.printables.com/model/237266-box-print-in-place The Model is Print-in-place.…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant

Downloads
323
Likes
60
Rating
4
P
PrintablesFlederlaus

Diffusor-Schlüssel - Wasserhahn Perlator für Gr. 18, 22, 24

Ein Schlüssel, für die Größen 18, 22 und 24, um den Perlator von einem Wasserhahn zu lösen oder wieder anzuziehen. Die üblichen Werkzeuge sind sperrig und nie zur Hand. Leicht verstaubar lässt sich damit schnell ein Sprudlerkopf vom Hahn…

Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant

Downloads
301
Likes
16
Rating
4.5
P
PrintablesLeon Kabel

Elegoo Neptune 4 Plus Diffusor

The light of my Elegoo Neptune 4 Plus was a little to bright for my liking. So i desgned this. My recommended print settings: * 0.4 mm nozzle * layer height same as file name * 4 walls * infill doesnt matter * You dont need supports Happy…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
249
Likes
53
Rating
4.8
P
PrintablesSaphyreKry

Modified Deburring Tool Case Insert (AFA Tooling) - Rugged Box Style

This is a modified version of Lndnny's Deburring Tool Case 150mm (AFA Tooling) - Rugged Box Style . A fantastic case for the hexagon handle. This lower insert is modified to accommodate the Round Aluminum Knurled handle version. I haven't…

Print approx. €2.68–€3.28 excl. taxPreliminary estimate for one variant

Downloads
240
Likes
36
Rating
5
P
PrintablesMike81622

PVC pipe bracket / holder (different sizes)

I recently added a heat pump to our pool, so I had to redo some of the piping and needed some brackets to hold them in place. Off the shelf brackets didn't work so I made my own ones and thought I'd share them, in case someone has the…

Print approx. €2.27–€2.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
239
Likes
66
Rating
5
P
PrintablesCollinsb

*Fix* Filament Sensor Lever i3MK3S+ Modification Fix

Is your i3MK3S+ printer wanting you to unload filament and reload filament in the middle of print for no reason? What's happening here is that the lever arm inside the extruder isn't fully blocking the light inside the sensor when the…

Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
198
Likes
20
Rating
5
P
PrintablesVoidFusion

4pin RGB LED Strip Diffuser

This diffuser is designed specifically for the 4pin WOWLed magnetic 30cm RGB light strips that you can get from amazon they come in a three pack with a three way adaptor. If you print these with a translucent white filament they diffuse…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
189
Likes
32
Rating
0
P
PrintablesUlbisch

Sink drain hair sieve - different dimensions

This strainer is easy to print and can be used in conjunction with the sink drain stopper. I printed it in PETG, however should also work with other materials. There are three different sieve types with different drain diameter offered.…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
174
Likes
63
Rating
5
P
PrintablesOlivier Popiers

Rigidificateur de canon/bouteille pcp Carabine Hatsan factory

A imprimer en 0.2 avec supports Nécessite 2 vis M3x25 et deux boulons M3

Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant

Downloads
173
Likes
10
Rating
0

Magnetic Flash Modifiers (Yongnuo YN685)

A set of magnetically mountable light shapers for Yongnuo YN685 flashes, consisting of a gel holder and a honeycomb/grid that reduces the light output angle to roughly 40°. The magnets used are widely-available 8x3mm neodymium ones (dia x…

Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
171
Likes
41
Rating
0
P
PrintablesPlaneta13

differential

differential - functional model

Print approx. €8.19–€10.00 excl. taxPreliminary estimate for one variant

Downloads
150
Likes
22
Rating
5
P
PrintablesNils Kal

Printing Booth LED Logo - Different Logos Available

Here is my design of a hexagonal LED Logo to put in your printing booth. The covers are interchangeable so you can even design your own front! The whole print doesn't require any other hardware than an LED strip. Also you won't need any…

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant

Downloads
134
Likes
94
Rating
5
P
PrintablesBOZ

Fidget Gear Ring V1 – Triple Herringbone Planetary Gear - Anti Stress Ring - 51 Different Sizes

⚙ Fidget Gear Ring V1 – Triple Herringbone Planetary Gear 🆕 Update – Ring Release Tool Included Since some users have experienced difficulties loosening the gears after printing, I have created matching two-piece ring clamps for every…

Print approx. €1.51–€1.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
133
Likes
16
Rating
2
P
Printablesso meone

Fast Print fully parametric LED Matrix Cover / Diffusor made in Fullcontrol, tested with: 8x8 16x16 32x32

A parametric LED Matrix diffusor front plate. fullcontrolXYZ based, 100%extrusion, 0 travel, 0 retractions. Extrudes at 0.8mm, which is totally fine for a 0.4nozzle. A bigger nozzle will probably allow much faster print speeds. Prints as…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
131
Likes
11
Rating
0
P
PrintablesMark Makies

GlowBit 8x8 LED Matrix Cellular Diffuser

I printed at 0.2mm. The bottom when printed, which becomes the top, is done with two layers at 45 degrees. I used generic white PLA, but anything that is slightly transparent should do. More of my builds at makies.au

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
126
Likes
8
Rating
0
P
Printablesjaln

Corsori Food Dehydrator (CFD-N051-W) Modification to Filament Dryer

This is a design for modifying a COSORI 11.62" Food Dehydrator CFD-N051-W; 350W--will NOT fit the Cosori CFD165FD 13.8" 450W model! . The shell allows drying two spools of filament at a time. I used Polymaker Transparent PETg. On the…

Print approx. €6.37–€7.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
115
Likes
23
Rating
4.67
P
Printables3dBastler

Fly Wheel Modified for Nerv Blaster "Stryfe"

Modified the fly wheels from the Blaster of my son, i replaced one with this part printed in PLA, result is better firepower and less sqeezing of the darts. Print instructions I use PLA and 0.20mm layer high, PETG will work fine too.…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
111
Likes
22
Rating
0
P
PrintablesGamerMechanic81

Temples modified for zenni plastic glasses frames

My wife's temples on her glasses broke. These fit her frames. These are designed to have a nut embedded in the bottom for threads. Use a soldering iron to melt them into place as you would a heat set insert.

Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
105
Likes
9
Rating
5
P
PrintablesERIK3DP

Mounting Cover for Rosahl M-1J1R Electric Dehumidifier Membrane based Filament Drybox

This is a mounting cover/frame for a Rosahl M-1J1R electric dehumidifer membrane which can be used for a filament drybox of around 20-30l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…

Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant

Downloads
101
Likes
17
Rating
5
P
Printablestom

Ein Satz verschiedener Haken/ A set of different hooks

Ein Satz verschiedener Haken zum Schrauben oder Kleben. Wir nutzen diese Haken als Schlüsselbrett. Die Bohrungen sind ausgelegt für Holzsenkkopfschrauben Durchmesser 2,5mm. Ungenutzte Bohrungen kann man mit "Abdeckung Bohrung" und etwas…

Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
95
Likes
14
Rating
5
P
PrintablesHarms3D

LED Diffusor Coaster for Coacktail / Drink / Bottle

A drink/bottle coaster diffusor with simple LED lighting. The goal was to construct a small housing for a LED sticker without support. I hope you like it. It consists of a lid and bottom that are held together with a bayonet catch. The…

Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant

Downloads
90
Likes
42
Rating
5
P
Printablesmacc

Modified back cover for fysetc 2.8 lcd display board

Modified back cover part to fit fysetc 2.8 lcd display board (speaker and connector have a different position). Other parts see original model “Prusa Mini - Back cover with USB”

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant

Downloads
83
Likes
7
Rating
5
P
PrintablesLudo B

8 Verschillende bolders voor aanlegsteigers. 8 Different bollards for jetties

8 Verschillende bolders voor de modelbouw 1/87ste om boten aan te meren aan de kade. Ik heb het op ware grote getekend en dan verschaald naar 1.15 voor 1/87 te bekomen. Voor de modelbouw zal het niet te veel moeite kosten om met wat…

Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant

Downloads
81
Likes
2
Rating
0
P
PrintablesCrazyRonny

LED Strip Channel with Diffusers - include corner joiner end end cap

Don't find what I was looking for to put in my Lack Table Enclosure, so I created this one. I try a few good design I found around but none was really what I was looking for… I don't want to see any screw, I also want a track to put my…

Print approx. €1.26–€1.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
76
Likes
18
Rating
4
P
PrintablesPlasticPeer

Bird nesting house with 3 different looks Timber frame, Bricks and Football.

Bird nesting house with 3 different looks Timber frame, Bricks and Football. You will need all the common files and a set of one of the designs to make a house This Bird house can be assembled mostly mechanically, only the Rooftop of the…

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
75
Likes
24
Rating
0
P
Printablestimfahrner

Short Diffusor Led Lenser P7R

Just a small and portable diffusor for Led Lenser P7R Just printed another one and got some pretty bad overhangs with 0.3 resolution. with 0.15 everything was fine. So maybe play with the resolution if you are not happy with the result.

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant

Downloads
70
Likes
13
Rating
4.5
P
PrintablesJoseph Craig

TaoTronics-Ultrasonic-Cool-Mist-Humidifier Replacement Duct

Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
70
Likes
6
Rating
0
P
PrintablesTRex22

Creality Ender 2 PRO Handle with Z Axis stabiliser modified for bigger hands and tools

I remixed this model so that larger tools can fit through the handle holes to screw it down. I also made it longer to be more ergonomic. I also flattened the bottom to help improve printing. I usually print with a 0.4 mm nozzle at 0.16mm…

Print approx. €2.88–€3.51 excl. taxPreliminary estimate for one variant

Downloads
66
Likes
9
Rating
4
P
Printablesvitico1101

Soporte para audifonos de casco

Soporte para audifonos de casco detalle de Dota2

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant

Downloads
65
Likes
6
Rating
0
P
Printableswilsondg

PrusaBox Enclosure 4 Way Relay Holder in Cover Lid Modified to be held with two screws

This model is a variation of Collin Hill's lid design to hold a 4 way relay under the lid. When I printed his design, my board was just a bit too wide to fit in the slots, so I modified the design so that on the right side, the relay…

Print approx. €2.82–€3.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
61
Likes
13
Rating
0
P
Printablesgam3fr33k

65 Mustang Falcon Galaxie Fresh Air Vent Baffle Diffuser

This is a reproduction designed from scratch using dimensions from a Ford original floor fresh air vent baffle, specifically for a 1965 Ford Mustang. The part number is C4AB6201820A. I have never found any reproduction for this part, and…

Print approx. €6.82–€8.33 excl. taxPreliminary estimate for one variant

Downloads
60
Likes
9
Rating
0
P
PrintablesPaul

Modified MMU3 Selector (very slight)

The stock MMU3 Selector tends to break when tightening the clamp that holds the FINDA in place. My first one broke, as it seems they made the hole larger than the previous model. I ended up remodeling a couple features on it. First, I…

Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
58
Likes
10
Rating
0
P
PrintablesmC_rOMeo

Raspberry Pi Zero 2 W modified frame for Einsy RAMBo (MK3S/+)

It is a frame for the Pi Zero 2 W to install it on the Einsy RAMBo and I added space for the full colored GPIO header w/o unneeded pins and USB&HDMI port cover to protect against shorts.

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
56
Likes
5
Rating
0
P
Printablesmkoistinen

Waveshare Ethernet/USB HUB HAT guard and Modified RaspPi Zero Guard for PrusaLink

As PrusaLink/PrusaConnect now supports USB Webcams, I've remixed Prusa's Raspberry Pi Zero frame for Einsy Rambo model to provide some protection for Waveshare's Ethernet/USB Hub pHat. The Waveshare pHat comes with brass spacers and some…

Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
55
Likes
11
Rating
4.33
P
Printablesjcjames_13009

Octagonal boxes for anti-insect essential oil diffuser

I had anti-insect essential oil diffusers in damaged wooden boxes looking like Camembert ones I designed simple octagonal box and lid with Fusion 360 to replace them. Printed on my Prusa MINI+ with Prusament PLA Galaxy Black and Vanilla…

Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant

Downloads
52
Likes
12
Rating
0
P
PrintablesZeroCircle

Wurkkos TS11 Diffuser/Cover

Printed in transparent polymaker PETG, max 15mm/second print speed makes the diffuser clear but transparent enough. Prints without supports. I used a archimedean curve on the external face which looks pretty cool.

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47
Likes
8
Rating
5
P
PrintablesHollaDaywalker

Portal Turret Pumpkin (Modified Eye Piece)

Modified eye piece for ByteSlinger's Portal Turret Pumpkin.

Print approx. €1.95–€2.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
44
Likes
16
Rating
0
P
PrintablesRonald Lokers

NiteCore MH12GT - 25.4mm light diffusor

A diffusor that can be used with the NiteCore MH12GT or any other flashlight that has a head of 25.4mm wide.

Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
3
Rating
0
P

Puzzle Christmas Tree Ornament - Very Simple but Difficult

The 10 precent who figured this out are MD's. Everyone else gave up or over-torqued the tree and broke it. You can put a $1 - $100 bill in the trunk and offer it as a gift or prize. The buttons on the side of the trunk are simply…

Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
7
Rating
5
P
PrintablesPlasmo.cz

Parts for modifying instruments Octavia 2

Parts for retrofitting 3D color instruments from VW into Skoda Octavia 2.

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
2
Rating
0
P
PrintablesCelta

Corner with hole for Light diffuser

Modified the corner piece for Lowell Alleman 's LED diffuser . Added a small hole to let the cable exit.

Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
7
Rating
5
P
PrintablesATXMatt

EVA-DRY E333 Dehumidifier Stand

Based on the EVA-Dry E333 Stand by DaJMasta https://www.thingiverse.com/thing:3747734. This a perfect stand for the EVA-DRY E333 Dehumidifier, works perfect for your dry box or enclosure. I'm using it in my dry box with some double-sided…

Print approx. €4.31–€5.27 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
11
Rating
5
P
Printableslayershifter

Modified (LCD) Cable cover for Prusa XL

This cover is a remixed version of the Z stepper motor cable covers with more wiggle room for the cables to bend. I created it, because I felt the original cover where the LCD assembly cables leave the frame provides insufficient guidance…

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
11
Rating
0
P
PrintablesLukas

Window dehumidifier

Story: We have recently moved into a new apartment. It is a nice flat, but pretty old. The bedroom and living room have two rows of windows each. During the winter months a lot of humidity accumulates between those windows. In order to…

Print approx. €11.47–€14.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
33
Likes
9
Rating
0
P

Bag Clips (Modified with Finger/Thumb Tabs)

These clips are used to seal your open potato chip bag. Three sizes are available. Because there is a large printing overhang for the tabs, I included tree supports which removed easily.

Print approx. €4.04–€4.94 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
6
Rating
0
P
PrintablesMichael

Ford Focus MK4 | handle light diffuser V2 (REMIX)

Diffuser fitting a Ford Focus MK4 to install Aliexpress ambient lights.

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
5
Rating
0
P
PrintablesBOZ

Fidget Gear Ring V3 – Triple Herringbone Planetary Gear - Anti Stress Ring - 51 Different Sizes

Fidget Gear Ring V3 – Triple Herringbone Planetary Gear 🆕 Update – Ring Release Tool Included Since some users have experienced difficulties loosening the gears after printing, I have created matching two-piece ring clamps for every ring…

Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
6
Rating
0
P
Printablesdada

MOX Box modified parts to add a fan

Update 24/08/2023 : Add of an easiest way to plug a fan to your Mox with a unique part to print. The Turris Mox is an modular, open source and secure router. Even though this is a great router, it tends to get hot and reboot. To fix it, I…

Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
1
Rating
0
P
PrintablesArt3Design

Waveshare Ethernet/USB HUB HAT guard and Modified RaspPi Zero Guard for PrusaLink

pdated version of the RPi Zero Frame to protect the Waveshare Ethernet/USB Hub pHat for Webcam usage with PrusaLink.

Print approx. €0.64–€0.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
24
Likes
6
Rating
0
P
PrintablesRo3Deee

Bottle cap with with tube hole for dehumidifiers

The include project is for 41mm bottle cap diameters and 13mm tube diameter. The provided Freecad sourse file can be modified for other diameters. Print settings: ZERO top layers 0.3 layer height 3 perimeters

Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
6
Rating
0
P
PrintablesHenk

A different type of 3D Maze

This design of a 3D Maze is originally based on an article from Scientific American from September 1988. There this is called “a van Deventer Maze”, or “Oskar's Cube”. You can also find more info about Oskar van Deventer and his puzzles…

Print approx. €2.94–€3.59 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
8
Rating
5
P
Printablesparticleflux

Different sizes for the "Redesigned inserts for the Precision Screwdriver Case"

Another remix of the inset for the "Precision screwdriver case" by TimATX

Print approx. €2.38–€2.91 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
5
Rating
0
P
PrintablesFélix

LED track and diffuser for printer enclosure

I've made this LED track and diffuser for my printer enclosure (which I also designed, built out of wood, and could share the model for if some folks are interested) I've printed the rails, corners and front with opaque white PETG, and…

Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
19
Likes
6
Rating
0

Humidifier bottle cup, UMS V1

Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…

Print approx. €2.03–€2.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
2
Rating
0
P
PrintablesKri_U

Ultimate Cereal Drybox official remix - modified base for boxes with wider lids

some boxes like theses (which I don't recommend cause the handle squeeze most spools, buy theses one instead if you're in France) come with a lid opening that is a little wider which cause the base to not fit in the lid (see the arrows in…

Print approx. €3.89–€4.75 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
5
Rating
0
P
PrintablesRPK

Battery Exctractor Modified

DE: Dankeschön an Luca, diese Idee macht mir meinen Batterieorganizer noch wertvoller! AA und AAA Batterien haben oft im Bereiche des Plus-Poles eine ringförmige Kerbe. Damit der Hebel bei Vorhandensein besser daran angreifen kann habe…

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
2
Rating
0
P
PrintablesMarAlMe

WdtPro S3000 Diffuser

English: Diffuser cap for the WdtPro S3000 flashlight. Printed in transparent Filament PM PETG. Deutsch: Streulichtkappe für die WdtPro S3000 Taschenlampe. In transparentem Filament PM PETG gedruckt.

Print approx. €1.10–€1.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
2
Rating
0
P
Printablesriethmueller

Flexible holder to fill cardboard tubes of different paper towels (e.g. kitchen towel)

I don't like to do anything in plastic. My favorite material is wood but 3d printing is the perfect add-on to that. So I designed one holder for workshop towels and kitchen paper towels (core ~40mm) for wood (if you are interested in the…

Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
0
Rating
0
P
Printablesjohnsonfarms

Flashlight Diffuser for Fully Printed Flashlight

These are diffusers that fit the fully printed flashlight . Replace the original bulb conductor with this threaded one, then pick your diffuser and screw it on. I have found it most usable to actually glue the diffuser to the bulb…

Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
2
Rating
5
P
Printablesmacsddau

Reed Diffuser Corner Shelf

Discreet, in a corner of the toilet or bathroom, fits perfectly with the 100ml bottle from the Durance brand. The piece is thin and deforms easily. Mounting it on the wall and adding the bottle provides enough hold. Do not use PLA as it…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
0
Rating
0
P
PrintablesFloralCoal

samsung flip 5 desk light diffuser

I made this to diffuse the light from my flip5. Its great as a very soft night light. Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 3 Infill…

Print approx. €3.45–€4.22 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
3
Rating
0
P
PrintablesTDM465

modified LimeLite v28 mount box

If you use the Coral Accelerator with the LimeLite and you use this (or the original) bracket, see the back-mount Coral bracket here https://www.printables.com/model/908221-coral-accellerator-bracket-for-limelight-bracket

Print approx. €5.15–€6.30 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
1
Rating
0
P
PrintablesPutocreo

Ornamental fountain diffuser.

Spare part for a trumpet-shaped ornamental fountain diffuser. Includes a threaded element as the fixing accessory. I needed it, so I redesigned it with some improvements. I love solving problems with 3D printing.

Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
6
Rating
0
P
Printablesvi_psal

Nitecore HC30 Headlamp Diffuser

printed with transparent ABS-T

Print approx. €1.27–€1.56 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
1
Rating
0

Boya flotador para deshumidificador

Boya flotador para tanque de agua de un deshumidificador marca Ufesa. Lo he realizado: En PETG con 2 perímetros y un 10% de relleno.

Print approx. €3.83–€4.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
0
Rating
0
P
PrintablesJérémy Reeder

15° Deflector for Scent Diffuser

I don't like how this turned out. I was going for 30° of deflection, but 15° was all I got. So go instead with my 80- or 90-degree deflectors, which work beautifully. Instructions Print without infill, without solid top layers, and…

Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
0
Rating
0
P
PrintablesAKarel

Bottle Attachment for Humidifier-Fragrance Night Light Fumigator

Reinforced bottle attachment to replace the broken original in the humidifier-flavoring night light fumigator

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
8
Likes
0
Rating
0
P
PrintablesMaran87

Termet - Tech sterowniki ST-292 v2 modyfikacja obudowy zdalnego sterowania / modification the remote control case

PL Jest to modyfikacja spodniej części obudowy (tej z wtyczką 230 V) zdalnego sterowania centralnym ogrzewaniem firmy Tech sterowniki ST-292 v2 (występującą też pod nazwą Termet). Modyfikacja polega na usunięciu wtyczki 230 V i…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
0
Rating
0
P
PrintablesPrintyet

LED-Eckprofil 45° mit Klick-Diffusor, Endkappen und Verbinder

LED-Eckprofil 45° – mit einklickendem Diffusor Ich habe dieses Profil für LED-Streifen mit einer maximalen Breite von 15 mm in Fusion360 entworfen. Der Streifen wird auf die schräge Fläche im Kanal geklebt, das Licht tritt unter 45° zu…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
4
Rating
0
P
PrintablesLutraVulgaris

Car silhouettes! different models

scale it up, make it flat, integrate, do what you want ;) I print with 1 layer raft to compensate for fine lines. Had some trouble on a first print without it, they tend to curl up for there is too little adhesion for a single line. for…

Downloads
11,862
Likes
2,884
Rating
4.96

Drink dispenser (different models)

Drink organizer. New model 2024 https://www.printables.com/es/model/781648-2024-stackable-rotary-drink-dispenser New model 2023 https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser And modular model :…

Downloads
10,350
Likes
6,381
Rating
4.66
P
PrintablesCasaPrint3D

Turbofan aroma diffuser - Car vent mini Jet engine

This miniature jet engine easily attaches to your car's AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container. Update 11-May-24: Version V2 Added Important: Using a heat-resistant material is…

Downloads
10,048
Likes
1,684
Rating
4.88
P
PrintablesWidgets

Sound Diffusion Panels (Square and Hexagon)

3D Printed Diffusion Panels Before printing watch The Next Layer video, Jonathan's setup is amazing and it explains what you can expect way better than I could in this description. At 8.25" (209mm) this is the largest printable diffusion…

Downloads
9,799
Likes
4,413
Rating
4.9
P
PrintablesClay

Gridfinity Pliers Racks Mega Pack (92 different Sizes)

Open ended Gridfinity tools racks. 3x3 through 5x6 grid bases with divisions between 7mm - 39mm 56mm total height 2mm walls all around - Strong enough for a toolbox Div widths are rounded down, most are +.5mm of extra space. Material…

Downloads
9,449
Likes
1,628
Rating
4.95
P
PrintablesN_F_B

Ender 3 v2 STEP file for easy modification and design

Found this amazing model of an Ender 3 v2 to make mods for. This will save you lots of time and headaces. This STEP file allowes you to make designs for the Ender 3 v2 without having to mesure everything on the machine. I used Fusion 360…

Downloads
8,029
Likes
360
Rating
4.5
P
Printablesonez

LEGO TECHNIC COMPATIBLE Gears & Differential

Gears&Differential that are compatible with brick systems. Load the file into your slicer and right click, select “split→to objects”. Then pick the gears you need out of the stl/step and delete the ones you dont want to use - print laying…

Downloads
7,456
Likes
746
Rating
4.73
P
Printables3Dimensions

Junction Box, different sizes

Print your own junction box and attach various WAGO terminals. Whichever you need for your application. Secure your cables with zip ties or various cable glands. Use the threads for your cable glands or drill your own holes to secure the…

Downloads
6,068
Likes
2,296
Rating
4.86
P
PrintablesGokuXIV

Pegboard in 3 different sizes

Pegboard in 3 different sizes. Fully compatible with the IKEA Skadis Pegboard solution. Print settings: 0.2 mm layer height No support needed Mounting: Please use 3mm or 4mm screws. Max head size 8 mm. Either place the board mounts or…

Downloads
4,858
Likes
1,625
Rating
4.91
P
Printablesnhchiu

Noctua Airflow Amplifier for Different Fan Sizes (with Gopro and tripod mount)

Updated: 2024/07/29 Added 180mm version (Silverstone AP181, mounting hole spacing 165mm). Updated: 2024/06/09 Remodeled the outer surface so now it can be scaled to more different sizes without making the shell too thin or too thick. It…

Downloads
4,667
Likes
897
Rating
5
P
PrintablesSimon

200% Dummy 13 Modified

DUMMY 13 resized to 200% with a few alterations. 200% feels like how this model was meant to be. This model does rely on strong materials, I’ve had good results with high quality PLA. I've added a couple of test STLs so you can test your…

Downloads
4,453
Likes
626
Rating
4.86
P
Printables3DMason

Articulated Dachshund - 3 Different Lengths - No supports required.

Cute articulated Dachshunds from https://www.thingiverse.com/coyotelc 3 lengths available from short to super long. Print-in-place. If your printer can do fairly decent overhangs, then supports are not necessary. If you like this model,…

Downloads
4,257
Likes
521
Rating
4.81
P
Printablesspool2kool

led strip diffuser

diffuse you LEDs! Be sure to read the manual to see how. STLs for reference only. Use openSCAD to customize to your setup. need a box? Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Certain parts Resolution:…

Downloads
3,643
Likes
696
Rating
4.91
P
Printablesblmak

Water diffuser for water hose

This is a redesigned version of my previous water diffuser. It's intended to prevent holes forming in the ground while watering, and it allows for higher water flow rates. The diffuser is designed to connect directly to a standard…

Downloads
3,639
Likes
1,435
Rating
4.94
P
PrintablesTomas
18+

The source marked this model as adult content.

Downloads
3,458
Likes
433
Rating
3