Search results: din

Sort order

20,642 models

P
PrintablesM4NU

Precision Tweezers v2 - 3D Folding

A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. I published an improved model of these tweezers (Precision Tweezers V3) :…

Downloads
41,808
Likes
12,184
Rating
4.67
P
PrintablesSneaks

Dino-Clip Mechanical CAM Chip-Clip (PRINT-IN-PLACE)

🔥 NEW 2025 DESIGN AVAILABLE: The official, newly improved version of the Dino-Clip is now available for download on Etsy ! It features an updated Dinosaur design, improved strength, and flawless break-away support removal. The new…

Downloads
34,750
Likes
7,683
Rating
4.94

FlexiDinos Günther the flexi Stegosaurus print in place articulated dinosaur

Edit: Thank you for 15.000 Downloads! I've made a 2025 Update of the model! You can download Fünther here! I wanted to make a Flexi Dinosaur since I first saw the Flexi Rex. As my son had his birthday last week I decided this would be the…

Downloads
23,486
Likes
4,917
Rating
4.97
P
PrintablesRalf Hörhager

Sanding Wedge V2

General information As you might have guessed from the title, this is the 2nd version of my sanding wedge. I made the models in Autodesk Inventor. The new design is Fully 3d printed, no bolts or nuts needed. Also check out the Remixes…

Downloads
15,428
Likes
4,672
Rating
4.92
P
PrintablesPrusa Research

Hinged lid for adding MMU2S to Original Prusa Enclosure

Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…

Downloads
10,227
Likes
1,063
Rating
4.8
P
PrintablesUWcharlie1983

Velociraptor Dinosaur

The Velociraptor Head is a little more complex to print than many of my other animal heads because the teeth require support. You will probably also want support for the back of the jaw, but this model printed fine for me without support…

Downloads
7,448
Likes
1,130
Rating
4.98
P
PrintablesJake Reeves

The Elder Wand - Wizarding World of Harry Potter

I designed this Elder Wand from pictures after watching the Harry Potter movie series again in anticipation of Halloween. It is divided into two pieces so that it will print on smaller print beds, but have also included the full wand for…

Downloads
7,306
Likes
842
Rating
4.83
P
PrintablesToby3D

Cute Mini Dinosaurs

Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…

Downloads
7,182
Likes
1,444
Rating
4.76
P
PrintablesA2S_dESIGN

Folding soldering iron stand

Practical support for tin soldering iron. Universal size. Its small folded size allows it to be stored anywhere. Very practical to carry in the toolbox. Print in place.

Downloads
6,251
Likes
2,124
Rating
4.92
P
PrintablesMiroslav Faist

Empire State Building (SKYSCRAPER) - detailed model

Skyscraper modeled onscreen on YouTube. I used PLA, 0,10 mm layer height and 0.4 mm nozzle. You dont have to use any supports and 5 % infill is fine. In this configuration, it will take roughly 17 hours to print.

Downloads
5,811
Likes
342
Rating
4.89
P
PrintablesDragon

Dino Balance

For single player this simple balancing game has one main goal… see how many dinos you can stack on the wobbly base. With two players you will need two of each dinosaurs printed. Each player will start with 10 dinosaur pieces. Then one…

Downloads
5,473
Likes
2,758
Rating
4.91
P
PrintablesSheepMe!

Bending Jig

I found this jig made from wood on my trip to Japan twenty years ago in the alleys of an electronics market in Shibuya, Tokyo. I thought why not share with you the little tool that has served me well for years. Model 133 x 17.5 mm Bending…

Downloads
5,393
Likes
2,354
Rating
4.92
P
PrintablesAlexMu

Spooly cable safe - no bending cables

After a lot of prototyping now my final version. KEY FEATURES lightweight for traveling cables up to 6mm in original size /small one 4mm cable big radius to protect cable from breaking wheel design to see the cable snap in design for easy…

Downloads
5,240
Likes
1,253
Rating
4.75
P
PrintablesFC2M3D

Cute Stylized Triceratops Dinosaur Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊

Downloads
4,730
Likes
675
Rating
5
P
PrintablesMarc Bresson

Parametric stackable cable organizer / winder (one-way or two-way winding) with FreeCAD files

Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…

Downloads
4,389
Likes
582
Rating
4.81
P
PrintablesMy 3D Prints

4 in 1 Tool - Filament & PTFE Cutter + Filament welding

This is another 4-in-1 tool for 3D printing in the style of my model https://www.printables.com/model/191102-spatula-3in1. With this model you can cut 1.75mm filament at 45° and 90°. You can also cut the PTFE tube at 90°, and you can even…

Downloads
2,688
Likes
860
Rating
4.8
P
PrintablesLoubie3D

Schrodinky: British Shorthair Cat Sitting In A Box(single extrusion version)

EDIT: I forgot to add in the name kindly given to my cat by Mark "Velocity Painting" Wheadon ( https://t.co/LF6wu0B4sd ): Schrodinky! A couple of weeks ago, I posted a very cute picture on Twitter of a British Shorthair kitten sitting in…

Downloads
2,680
Likes
425
Rating
4.96
P
PrintablesMaxstupo

DIN Rail Clip (Heat Insert Version)

A modified version of the 35mm DIN Rail bracket by Fabian. Uses heat inserts (M3 x D4.6 x L4.0). Hole spacing is 51mm. Step file included. A springless version is available here .

Downloads
2,545
Likes
196
Rating
5

FlexiDinos Fünther the flexi Stegosaurus print in place articulated dinosaur (Günther 2025 update)

You did it! The original Günther has reached 15.000 downloads, so here it is: Fünther. It's like Günther but one better. With a shaped body so it fits the rest of the FlexiDinos. Edit, 23. 7. 2026: Updated the MOST 1:100 version and cover…

Downloads
2,305
Likes
298
Rating
4.98
P
PrintablesJonW

DJI Mini landing pad

Drone landing pad 300 x 300 mm designed for my DJI Mini 2. Printed without top and bottom layers (black part), for a better effect. Print 2x Part 1 and 2x Part 2. Print instructions : Layer height : 0.2 mm. Infill : Honeycomb 20 %. 2…

Downloads
2,256
Likes
385
Rating
4.82
P
PrintablesTimbroddin

Dean the MMU dino

This is Dean, the droopy dino, coloured for MMU printing. I found him on Cults3D and since it was just a single STL, I used PrusaSlicer to paint him. Original model by BirdBott .

Downloads
2,228
Likes
290
Rating
4.92
P
PrintablesObe_Design

Resistor Lead Bending Tool - Leg Forming

A handy resistor lead bending tool designed for quick and accurate forming of through-hole resistor legs. 🔧 Includes: A 6.3 mm spacing slot – ideal for standard 1/4W Arduino resistors A 10 cm gap – useful for larger power resistors or…

Downloads
2,129
Likes
644
Rating
4.96
P
Printablesdteng

Print-in-Place Folding iPhone Duo Mockup

This model provides a representation of the overall dimensions for the iPhone Duo, to evaluate how it feels in the hand, and whether or not it will fit in your pocket. It was modeled using overall dimensions announced by Apple (not a…

Downloads
1,950
Likes
61
Rating
4.67
P
PrintablesTritschi

Tool Box for Prusa Tools (for adding upcoming Core One, XL or MK4S)

EDIT 21-Apr-2023: Added an Voron-Edition: https://www.printables.com/de/model/458704-tool-box-toolbox-for-voron-3d-printers-several-ver EDIT 20-Apr-2023: Added an Ender-Edition:…

Downloads
1,888
Likes
786
Rating
5
P
PrintablesJack

dual folding Wall Hook

wall hook folding out for coats or phones ( print in place ) can also be scaled to 70% (50% for the bold)

Downloads
1,818
Likes
458
Rating
4.89
P
PrintablesLucky

Flexi Dino Brachiosaures V2

Flexi Dino Brachiosaures V2 pour compléter votre collection. D'autres Dino… sont disponible.

Downloads
1,816
Likes
198
Rating
4.81
P
Printablesfivesixzero

Biegelehre Improved - Through-hole component lead bending tool

Accurately bending leads on radial, through-hole components like capacitors and resistors has never been this fun! :D Inspired by the fancy tools used by the talented Marco Reps in his GPS Nixie Clock video , I modeled a Biegelehre from…

Downloads
1,758
Likes
185
Rating
4.88
P
PrintablesUWcharlie1983

Dinosaur #3

The Triceratops Head should be a fairly easy print requiring only minimal supports. For similar models see my Collection of Animal Heads/Busts that I have designed or remixed. All of these designs use the same bracket to mount, making…

Downloads
1,507
Likes
293
Rating
4.83
P
PrintablesTJC_3dprinting

Welding helmet key chain

A small welding helmet with a loop for a split ring. Made for the engineers at work. Scales down nicely if you want it a bit smaller to fit in your pocket. No supports required. If you would like your own company initials or simple logo…

Downloads
1,424
Likes
183
Rating
4.9
P
PrintablesBdaboy

Kids Dino Cage

Pictures show Rev0 before I realized one of the snap slots was way off so there are considerable gaps. These should all be fixed now so the updated versions fit together quite well. Included are two sizes 70x70mm and 100x100mm but the…

Downloads
1,354
Likes
199
Rating
4.67
P
PrintablesManelTo

earrings chrome (cactus and dino) / pendientes chrome (cactus y dino) (freecad files and gcode)

They can be used combined with each other or not. Printed with 0.4mm nozzle, 0.15mm layer height and 20% density Added freecad file in case you want to modify the design Se pueden utilizar combinados entre sí o con un sólo motivo. Impreso…

Downloads
1,310
Likes
144
Rating
5

Reading Bar (Flat)

The flat reading bar isolates text on a page so readers can focus on reading one or two lines at a time. This tool can be helpful for those with dyslexia, ADD, and ADHD. Currently, there are two versions of this tool: one with a small…

Downloads
1,208
Likes
148
Rating
4.83
P
PrintablesLucky

Flexi Dino Triceratops

Flexi Dino Triceratops Dimension de l'objet 154x72 mm Ep 12 mm

Downloads
1,188
Likes
128
Rating
4.9
P
PrintablesTHop3D

Google Chrome Dino decoration

Chrome dino. Easily printable without supports if the dino and cacti are laying flat on the buildplate. Might need to be scaled slightly to fit smaller buildplates. If anyone has any questions please contact me, THop3D

Downloads
1,181
Likes
325
Rating
4.9
P
Printablesyukosteel

Leica M mount 6bit lens coding template

Precise template for 6bit coding of Leica M mount lenses. It's inspired by existing "Leica M Coding Tool" but that one didn't work for me, so I've used caliper to measure Leica M10 mount and designed more precise model from scratch. NOTE:…

Downloads
1,152
Likes
34
Rating
5
P
PrintablesNordheim

Sanding Wedge fully 3d printed

The thread in this version is not as strong as a normal screw but it worked for me. I had to screw it in a couple of times until it worked good. I printed it as shown in the picture below, used a bit of support for the thread in the main…

Downloads
1,142
Likes
210
Rating
4.9
P
PrintablesAleš Stárek
Downloads
1,139
Likes
151
Rating
5
P
PrintablesMichal Fanta

Ascending Track - W1

Ascending rail compatible with BRIO and IKEA wooden rails. See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code…

Downloads
1,117
Likes
96
Rating
4.08
P
PrintablesMaker404

Optimist (Opti) Sailing Dinghy model

Model Optimist (Opti) sailing dinghy for teaching purposes. This remix removes the words off the sail. I scaled it up some as well. Some supports are needed. The gcode file attached uses the new organic supports.

Downloads
1,082
Likes
47
Rating
4.5
P
PrintablesDionarap

Landinggear for Eclipson Model A (Free Version)

I downloaded the Free version of Eclipsons Model A. but there is the fuselage with the Landinggear not included. So i designed one to glue on the free version. it takes D3mm steelrods, wich are bended in shape. 15mm then 90° angle, then…

Downloads
1,010
Likes
48
Rating
5
P
PrintablesJKM

Coordinate XYZ - FANUC/ABB robot

Visualization of the XYZ coordinate system, including rotation of the FANUC/ABB robot axes A model created to help you orient your robot in XZY coordinates and rotate. Magnets are inserted into the model for better placement. Printing:…

Downloads
977
Likes
21
Rating
0
P
PrintablesJKM

Coordinate XYZ - KUKA

Visualization of the XYZ coordinate system, including rotation of the KUKA robot axes A model created to help you orient your robot in XZY coordinates and rotate. Magnets are inserted into the model for better placement. Printing:…

Downloads
969
Likes
17
Rating
0
P
PrintablesStrankler

Shelly Mini DIN-rail holder

As @FragileCobra_1676165 Shelly plus DIN-rail holders has no version for a Shelly mini, I made a remix of his model to have one. On the bottom are two openings. (1) is to access the Reset Button of the Shelly mimi, (2) is designed to…

Downloads
923
Likes
65
Rating
5
P
PrintablesHenningge

DIN EN ISO 527-2 Typ 1B Tensile test / Zugprobe

Bei Fragen gerne Anschreiben, oder wenn ihr mir die Anforderungen für eure Probe schickt, kann ich dazu auch eine fertige Druckdatei hochladen. Für Creo .prt Datei Anschreiben. Die .gcode Datei ganz oben entspricht den Anforderungen der…

Downloads
907
Likes
20
Rating
5
P
PrintablesLoogle

Sling Wing - Folding Wing Slingshot Glider

Intro I love flying wing gliders, but they're very difficult to launch by hand with any significant flight time due to instability at high speeds and typically large aspect ratio. I came across expired US Patent 4836817 for a folding wing…

Downloads
904
Likes
209
Rating
5
P
Printablesyul

Sliding+Legolini+-+Pump-Action+Repeating+Mini+Bow for Prusa Mini

Sliding+Legolini+-+Pump-Action+Repeating+Mini+Bow Prusa Mini version This is only a remix of the original made to be printed on Prusa Mini Original by Łukasz Janikowski Print instructions Made for prusa mini printer. Print without…

Downloads
887
Likes
79
Rating
0
P
PrintablesHD_Creator

Folding propeller for pusher and tractor planes

Application This is a high performance 6x3 propeller for RC model airplanes. The 6 means it has a size of 6 inch in diameter (roughly) and the 3 means that is has 3 inch of average pitch. Thanks to the straight form, without the usual…

Downloads
835
Likes
101
Rating
5
P
PrintablesDVE

Bow Sander (Sanding Bow) with f3d file

I have a lot of 1" thick sandpaper strips for the Rockler Bow Sander. The problem is that the tension adjustment is not well thought out - it's very difficult to get good tension. I've fixed that with this design. I've attached the Fusion…

Downloads
829
Likes
173
Rating
5
P
PrintablesGeekMomProjects

Snap-Together Folding Dodecahedron Frame

This model prints flat, then folds into a dodecahedron frame. The inner sides snap together (as shown in the video below) to hold the shape without any additional connectors. Print in PETG (as PLA is not sturdy enough) at 0.2 mm layer…

Downloads
808
Likes
184
Rating
4.94
P
Printablesncsandor

Skull with Brain - Candy Hiding Place

Print Settings Material: Prusament - PLA Opal Green / Gembird - PLA Plus Black Nozzle: 0.4mm Layerheight: 0.2mm Post Process Not necessary

Downloads
756
Likes
201
Rating
4.89
P
Printablesnem

Small compact sliding desiccant box

A small desiccant Box with 1mm wide gaps and a sliding opening. 90 x 45 x 19.8mm (Base) 90 x 45 x 13.5mm (Short)

Downloads
714
Likes
213
Rating
5
P
PrintablesKlaus

Bodenschoner für Biertisch / Festzeltgarnitur (floor protectors for folding table)

Bodenschoner für Festzeltgarnituren mit einer Breite von 30m. Zur Befestigung können Kabelbinder bis zu einer breite von 8mm genutzt werden. Je nach Anforderung kann der Bodenschoner direkt verwendet werden (z.B. um Steinböden zu…

Downloads
698
Likes
39
Rating
5
P
PrintablesWürth

Würth marking aid for folding rule

Marking Guide for Folding Ruler The marking guide for the folding ruler is an indispensable tool for precise marking and outlining measurements on various materials. This handy and robust marking guide is designed to enhance accuracy and…

Downloads
688
Likes
144
Rating
5
P
PrintablesJonathan Kayne

Baby Yoda Holding Beer Mug MMU

Based off the Baby Yoda holding Bone Broth from the Mandalorian. I was showing off one of my Baby Yoda Prints at a bar when someone came up with the idea. Original Base Model from Cults3D:…

Downloads
683
Likes
111
Rating
4.88
P
Printablesjcjames_13009

Sanding Blocks 125mm and 150mm Sanding Disks

To complete my Mirka DEROS sander and don't have to take it out for small and quick jobs, I designed and 3D printed sanding blocks for the 125mm and 150mm sanding disks I use Design Design from Fusion 360 is quite simple. I started from…

Downloads
672
Likes
130
Rating
5
P
Printablesjackw01

Compact Folding Backpack Hanger v2.0

Notes Update 2023-02-23: Added new clip v3 STL which has highly improved strength over v2; changed material recommendation after field testing. 21c-p2 hook.stl must be printed on its side with supports enabled as shown in the images, not…

Downloads
668
Likes
161
Rating
5
P
PrintablesRoy

wire winder for tangle-free figure-8 winding

Avoid twists and tangles by winding with a figure eight pattern. Scale print as desired. I recommend PETG over PLA to avoid warping with usage in hot weather. October 2022: revised model to remove one hole (the original version broke…

Downloads
619
Likes
51
Rating
5
P
PrintablesLumanieri

Luke's diner sign fridge magnets from Gilmore Girls

Hello. I have recreated the sign for Luke's diner from the 2000 show Gilmore Girls. The files come with both sides of the sign that hangs outside the diner. Six 10x2mm magnets required for each sign (12 in total), pause mid way through to…

Downloads
611
Likes
78
Rating
5
P
PrintablesRadek

Sam Porter Bridges / Death Stranding

3D Printable statue of Sam Porter Bridges from Death Stranding. For changed print settings take a look in uploaded 3MF file. Uploaded Gcode contains manual fillament changes, which doesnt need MMU. For right color order put the gcode into…

Downloads
578
Likes
55
Rating
4.5

Cars Dinoco Sign 3 Color

Color order: White, Orange, Blue. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back…

Downloads
566
Likes
247
Rating
5
P
PrintablesSquasherJoe

Canister Opening Wrench 1L - 60L (DIN 45 / DIN 51 / DIN 61, Ø 48 - 58 - 65 mm)

Simple opening and closing spanner for standard 4- or 8-ribbed lids of canisters between 1L-60L volume (DIN 45 thread, Ø48.2mm | DIN 51 thread, Ø58mm | DIN 61 thread, Ø65mm). Turn tool around or use the included insert depending on the…

Downloads
558
Likes
67
Rating
4.88
P
PrintablesRoland

DJI Osmo Pocket 3 - Stand (including .f3d)

Stand to place your DJI Pocket 3 safely on your desk.

Downloads
556
Likes
45
Rating
4.83
P
PrintablesAinon3Dtisk

Centering device for finding the center

Hello, Welcome to my profile, full of models and miniatures :-) I have here for you a Special tool for finding the center on a round rod or tube, just on any round thing. Suitable for the workshop for various uses. I used Bambulab PLA…

Downloads
546
Likes
193
Rating
5
P
Printablesmeagerfindings

Blunted Folding Knife Remix without Card Kit

This remix of https://www.printables.com/model/193429-blunted-folding-knife, removes the punch out / card kit elements to make it even easier and quicker to print.

Downloads
540
Likes
75
Rating
5
P
Printableschrstnsbrt

Trading Card - Card Tray Commander Deck

UPDATE: New Card Stack uploaded (Update Card Stack closed) . Now little bit higher and closed walls on both sides. Updated Card Stack printed without support and much faster Finally i build a Card Tray that fits my needs. It holds up to…

Downloads
533
Likes
108
Rating
4.86
P
PrintablesBaloo 3D

Din Grogu (Baby Yoda) scout woggle

Pasapañuelo / scarfring / neckerchief for Scouts or CubScout

Downloads
513
Likes
68
Rating
5
P
PrintablesRuben

no wifi dino from chrome (flexible)

this model is the dino from the no wifi game from google i original made it i suggest to print it in slower speed for the links it is a fun toy to play with or to give to sombody as a gift or for fun

Downloads
493
Likes
32
Rating
4.75

Muteflute/Sordina de flauta dulce

A simple and useful muteflute Printed at 0.4mm nozzle and 0.2mm layer quality with eSun petg The gcode file is for an Ender 3 V2

Downloads
491
Likes
20
Rating
4.86
P
PrintablesDVs3D

Peanuts - Woodstock Freestanding Remix

Remix of Dom's Peanuts-Woodstock model for freestanding print display. Remix printed with Prusa Pineapple Yellow and Matte Black PLA; 0.20mm Layers; nice 15% infill; no supports. X and Y dimensions can be adjusted to fit display needs. A…

Downloads
489
Likes
31
Rating
4.67
P
PrintablesIZ Labs

Mini Sanding Block

This is a mini sanding block that you can attach strips of sand paper to and allows for easier sanding with varying shapes (flat and round) for sanding of different shapes. A fellow PrusaPrinters member (@ TimTwix) noticed the flaw in the…

Downloads
477
Likes
78
Rating
4.57
P
Printableszefer

Laser ILCA Sailing Dinghy Boat

This was designed as a greetings card but also suitable as a decoration or fridge magnet. The photo shows it printed using a generic white PLA bought from the Prusa shop.

Downloads
474
Likes
39
Rating
5
P
PrintablesMaxT

Christmas Deer and Christmas Trees, with an optional custom display stand for freestanding use (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…

Downloads
457
Likes
84
Rating
5
P
PrintablesPavel

clown nose (self holding) / klaunský nos (samodržící)

three variants of the clown nose 1 - with a classic hole on the side for attaching a rubber band 2 - with a hidden rubber band attachment inside the nose 3 - a prototype that holds itself by anchoring into the nostrils, yum (if you have…

Downloads
451
Likes
46
Rating
5
P
PrintablesRizz

Wedding Table Numbers

I designed table numbers that can be used for occasions like weddings. It is easy to print them as multicolored prints even without MMU. The gcode files are prepared for that. 5-10 minutes before the end of the print the filament swap…

Downloads
444
Likes
85
Rating
4.5
P
PrintablesNeuraldeepnet

Scandinavian-Designed Portable Purse Holder Hanger Hook - Stylish, 3D Printed, Compact and Durable Hanging Solution

Allow your treasured handbag to take a break in style with our beautifully crafted Portable Purse Holder Hanger Hook. Perfectly designed for use on any table or surface, it keeps your purse handy and clean while enhancing the aesthetic of…

Downloads
441
Likes
62
Rating
4.67
P
PrintablesAlvomane

Folding Pillory Handcuff for Padlocks | Klappbare Pranger Handschelle für Vorhängeschlösser

EN: This is a folding toy pillory handcuff that can be locked with a padlock, a carabiner or simply a screw and nut. At the request of the youngsters, the wrist holes only have a diameter of 48 mm. For ‘adult use’, you can simply scale…

Downloads
438
Likes
63
Rating
0
P
PrintablesFC2M3D

Koala Holding a Heart Keychain

Easy to make a cute Koala holding a Heart keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Downloads
430
Likes
53
Rating
5

Vintage Sinclair Dino Sign 4 Colors

Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order Start w/White, Green, Red, Black last. Quick Guide to changing filament~ Have some paper to…

Downloads
406
Likes
139
Rating
5
P
Printablesdubmehard

Dachshund standing statue

Hello fellas, standing Dachshund statue. Enjoy the print!

Downloads
403
Likes
116
Rating
0
P
Printableszuberio

Print-In-Place Adjustable Folding Phone Holder

An easy to print-in-place phone holder/stand with 3 possible angles for the phone. Please note that the STL includes first-layer ‘tabs’ between separate small parts that need to be broken/cut post-print.

Downloads
398
Likes
61
Rating
4.5
P
PrintablesDaHouzKat

Original Prusa Enclosure Folding Door

Features Easy to print and install Only 1 plate to print (5 small parts) Reuse the existing hardware (bolts and nuts) Folds completely to the side of the printer when used with the optional 270° Hinge for Original Prusa Enclosure What you…

Downloads
391
Likes
183
Rating
4.94
P
PrintablesTreetech

Dino-Clip with printed snap-together axles - REMIX

Print the dino-clip in place without supports. Print two sets of axles for each hole with supports. Works great at 0.2mm. Set Infill to any percentage, I am using 20%. Works best to insert both outer axle pieces at the same time or do the…

Downloads
388
Likes
59
Rating
3.5
P
Printables3DHippo

Trading Card Box for 400 sleeved Cards

The box can be closed with a simple sliding mechanism. I have made 2 different types of latches: Flat ones that are exactly as high as the lid Latches with a small hook, so that they are easier to open. If you love this design and want to…

Downloads
380
Likes
87
Rating
5
P
PrintablesToby3D

Wedding Gnomes Duo – Charming Garden Decor for Your Special Day

Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…

Downloads
376
Likes
50
Rating
0
P
PrintablesLukas Mönch

DIN rail holder for Shelly 3EM measuring coils

I designed the holders so that the measuring coils are neatly in one place in the control cabinet. A lower (2.stl) and an upper (1.stl) part are screwed together by 4 screws. 4 M3 nuts are pressed into the lower part. The holder holds…

Downloads
368
Likes
44
Rating
4
P
PrintablesPonte

Dino Tic Tac Toe

This is a small Tic Tac Toe board with dinos. The Dinos need to be printed 5 and 4 times so you can fill up the board. They fit snug in the board. The board is 100x100mm, could be scaled up. The tolerance for the Dinos is 0.2mm. It prints…

Downloads
366
Likes
105
Rating
5
P
Printablesrevbem

BRASS Birmingham Buildings

I love playing the board game "BRASS - Birmingham" ;-) So I decided to make it even more enjoyful and created my own buildings. The buildings are designed to put the original building plates (e.g. beer, …) on the industry buildings. The…

Downloads
359
Likes
55
Rating
0
P
PrintablesEric BEAUGUITTE

Stackable Flower Pot including Plant Saucer

05/23/2024: Plant Saucer has been added *************************************************** This model can be print without any support and all parts can be print into a PRUSA MK3S+. For the “Pot spacer”, you could print 2 at the same…

Downloads
354
Likes
135
Rating
5
P
Printablescgaps

Interchangeable Sanding Contours

Interchangeable Contours – Multiple shapes and sizes to match any project Built-In Sandpaper Storage in Handle – Swap contours/grits easily for seamless workflow. Ideal for Woodworkers & DIYers – Perfect for furniture making, carving, and…

Downloads
349
Likes
155
Rating
5
P
PrintablesATXMatt

St. Louis Cardinals "Block Logo"

Love the St. Cardinals? This great raised logo that you can have at your desk! Printed at .2mm layer height, 20%infill (you could use more), and 1 color change (at layer 60 or about 12mm)

Downloads
334
Likes
29
Rating
5
P
PrintablesDom Cis

Little JOSEF PRUSA character riding a SHEEP - Multi Material

Little Josef Prusa Character riding a SHEEP, designed at the occasion of the Original Prusa MULTI MATERIAL UPGRADE 2.0 release. The model consists of 5-parts - prepared for 5-color print. Printed with MK3 & MMU 2.0 Read more about MMU 2.0…

Downloads
333
Likes
52
Rating
5
P
PrintablesMrRogers

Bookbinding Coptic Signature Punching Tool Guide Jig

Designed for Coptic stitch bookbinding technique Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on center of each 0.13" (3.3mm) hole. Markings are recessed…

Downloads
329
Likes
68
Rating
0
P
Printablespressi

Razor blade precision sliding knife

Minimalistic design suitable for precision workshop projects.

Downloads
327
Likes
35
Rating
5
P
PrintablesRudaisVells

Ball adding machine / Calculator (print in place, no supports) V1.0

This is simple adding machine. Main design of idea and some mechanical principles are taken from Canadian woodworker https://woodgears.ca/ I first saw his marble ball counting machine made out of wood about 10 years ago. Now I decided to…

Downloads
320
Likes
185
Rating
3
P
PrintablesFC2M3D

Dino with Candle Keychain

Easy to make a cute Dino with candle keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Downloads
317
Likes
53
Rating
5
P
PrintablesRosti

Dice Tower - Folding (Flat-Pack)

‘Sägertorn’ is a flat-pack dice tower. Not appearing at an Ikea near you any time soon. It incorporates 3 tumbling slats and a discharge ramp. Board games pack flat, why shouldn’t the dice tower? This tower can pack-flat into the top of…

Downloads
315
Likes
83
Rating
0
P
Printableskilar p

body of the grinding wheel holder 125mm

Držák je určen k uchycení brusných, řezných a brusných kotoučů o průměru 125 mm. Je možné potisknout střední trn nebo lze použít i bez trnu, například s těsněním. Držák lze umístit do skříňky na nářadí nebo do zásuvky. Dá se i…

Downloads
311
Likes
102
Rating
5
P
PrintablesSquidVicious

Chubby T-Rex Dino From Scan

After a dozen scanning attempts, several hours of tweaking settings, and adjusting the mesh and model, I finally achieve “Good Enough” status. Not perfect. Not awesome. But printable, and maybe someone can do something with it. I printed…

Downloads
287
Likes
41
Rating
4.5
P
PrintablesReini

TL-SG108E DIN Rail (Hutschienen) Mount (FreeCAD)

The model is a redraw from scratch of the din rail mount part from CrazyIvan359's Orange Pi 4 LTS DIN Mount and added parts to attach a TP-Link TL-SG108E Smart Switch. It is designed with FreeCAD, so you can easy adapt it to your needs.…

Downloads
285
Likes
19
Rating
5
P
PrintablesCakeman VR

Classic Pokemon Trading Cards Booster Pack- Charizard

I figured this would make a nice display piece and be fun to paint. Instructions: Print it on its side at about a 45 degree angle with supports to reduce the stepping effect.

Downloads
282
Likes
55
Rating
0