15,501 models
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…
A RaspBerry Pi 4 case designed to optimize the airflow around the board and to keep it well cooled without the need of a cooling fan. From the hestetical point of view, it is recommended White PLA, but it can be printed in any color you…
2025-06-07 - Added case file with no logo Remodelled raspberry pi 4 case from microcenter.com and updated by my liking. More ventilation micro SD card adapter slot Cutout for LEDs Tighter tolerances for tighter fit. Print instructions…
This is a 1U Server Rack rack/shelf designed initially to rack mount a bunch of Raspberry Pis. Each 1U shelf should hold up to six Pi 0/3/4/5 or some mixture with accessories. Every attempt is being made so that no supports should be…
Author: Emmett Lalish & ShawnGano Special herringbone planetary gear. The only way you can manufacture this piece is 3D printing as the interlocking gears cannot be assembled afterwards. Waste object (with wipe into infill) is pliers by…
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place Screwless Jack…
I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…
Fits Raspberry Pi 4 B and Hat (SenseHat) This Case also snaps to Domed Top from ... "Raspberry Pi4B Case for Noctua 40mm x 10mm Fan" Toggle and access for camera and GPIO and Toggle. Screws... Pi takes M2.5 (a set of 4 screws and nuts…
The newly released Raspberry Pi 5 is a significant upgrade from its predecessors, offering enhanced performance and connectivity. To complement this advanced board, we've created a new 3D-printed case prioritizing both airflow and…
Case for Raspberry Pi and Sense-Hat board SenseHat NOT required! Breakaway Supports included. New .35mm smaller Z, led window, pop-outs for joystick and GPIO, camera slot and insert cover, io ports edited. Snaps together Bracket for Case…
This model flies really well and looks really cool! Please let the print cool down fully before carefully removing the glider as to not unevenly bend the wings. For better gliding bend the wings and tail wings slightly so there is about a…
You can print this model, which consists of multiple parts, with any 3D printer. It is necessary to change the color by changing the filament in only 1 piece. All you need are filaments of suitable colors(red, black, yellow, green, and…
Marius' really nice Zero W2 case model only comes with a screw-fit back, whereas their Zero W case comes with either snap-fit or screw-fit backs. I tried using the back from the latter model but the pegs were slightly too large (~2.4mm).…
🚀 This is NOT a typical moon lamp 👉 You don’t just see the Moon — you feel it. 🌕 Moon Lamp – High-Relief NASA Edition (Ultra-Detailed Terrain - also visible without light ) with Mechanical Dimmer 🤯 Most 3D printed moon lamps rely on…
This case has 4 versions: Plain : No cutouts and no mesh Plain cutouts : This version also has no mesh but it has slits for GPIO and camera cables Mesh standard : A mesh is added in PrusaSlicer to the 3MF files. This only works when you…
I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…
The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ... I thought I could print the bracket I had designed for the Prusa MK3s. It fits too, but very tight, so it is very difficult to move.…
An OEM profile keycap that clearly marks an exit.** Keycap base model from another designer on Thingiverse, check them out here: https://www.thingiverse.com/thing:2783650 **Not just for Semiologists! Print instructions 80% infill 4 shells…
RPi 'Z-BOX' The RPi Z-Box, designed for the 4B, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…
Case for Noctua 5V 40x10mm 4 pin Fan... Snap together assembly, no screws required. CPU stays very Cool. 36C during stress test (100% Fan) Screwless! Frame4Fan-SimpleNoScrews-Assy Frame with posts, does not require screws for the case and…
I used Fusion 360 to design a Strawberry Pot, then 3D Printing to bring it to life. I'm going to grow some of my own food, and I LOVE strawberries! Learn how to make it yourself, just watch my tutorial! Print instructions This will fit a…
This is a minimalistic Raspberry Pi Case, designed to fit right behind the display of the Prusa Mini. It fits right on the aluminium extrusion and can be secured with a m3 screw and nut. (can be customised with the attached fusion file).…
This Case fits a Raspberry Pi 3B and also fits a SenseHat Board and has a second cover for GPIO, Camera and Toggle access... Top vents mirror display grid. Case is designed for Screw down and will accommodate the board without screws.…
This is a press-fit Pi 5 case, with customisable options for vents and ports, that also supports the optional active cooler. V1.1 has more tolerant clearances, less crush ribs and a slight taper to the longer pins. V1.2 has no specific…
Vented Case, SnapTop... This case is built for a cooler CPU when active cooling is used... derived from the need to cool the Pi 4B, The case requires a fan for significant cooling. This case will not cool the sbc by itself, but the…
🤨 Update 3/1: WE GOT THE GRAY TROPHY LET'S GOOOOOOO (seriously somehow I've had a lot more trouble getting one of the gray ones than the gold one) Update 2/16: v2 has been added! This one is a little more stable. Also, now I have a…
A simple bracket holding the case for a Raspberry Pi 3 B+ and SenseHat boards.... serving Octoprint etc. 2 M3 cap screws required. Print instructions ABS no supports.
A retro case that's simple and functional. Designed for use with pi's active cooler. I was aiming for a retro, Art Deco vibe, and also tried to capture the classic look of an RTX or Radeon reference GPU. Print Instructions: Settings: ~38g…
This is a simple model inspired by herringbone gears and designed to work as a flower pot cover. It fits standard plastic pots up to 11 cm in diameter. Print instructions I just used the standard profile for Prusament PETG, vase mode and…
This is a Desert themed house you can print for tabletop wargames such as Star Wars: Legion, 40k, etc. It prints all at once with no supports needed. If you are interested in other terrain files, check us out at imperialterrain.com Print…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Just a quick camera enclosure / stand I whipped up for my Raspberry Pi. Be aware: this enclosure does not fit the v1.3 camera! Print instructions Category: Camera Summary Just a quick camera enclosure / stand I whipped up for my Raspberry…
Designed for Prusa MINI/MINI+ Main features Easy to attach and detach from 30x30 aluminum extrusion of the MINI's z axis, no screws are necessary! Easy access to the Pi's SD card, no more disassembly required! In case you are also using a…
Printable insert for Terraforming Mars (Terraforming Mars / Hellas & Elysium / Prelude / Metal Cubes / Dual Layer Player Boards). It holds everything in place and the boxes can be placed next to the board. This insert was especially…
Parts required: 4x m2.5x12mm screws 4x m2.5 nuts While slicing, I used supports for the SD card slot and the screw holes but it's possible they may not all need supports. After printing, poke holes through the thin top layer that is…
A set of detailed stone pieces designed to support my Water Wheel model , and to be an easy addition to any tabletop terrain project! This is an easy set of pieces to print and put together, and it has enough detail for a simple…
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
This is hybrid between a tapered roller bearing, a herringbone gear set and a spiral bevel gear. it is ideal for use as a turntable roller bearing, taking mainly axial loads. It is self retaining/aligning with the parts kept in place…
Rasperry Pi 5 Case - Modular Snap Together This is a remix of the excellent "Modular Snap Together Raspberry Pi Case" by Sneaks , originally designed for the Raspberry Pi 3B+ and Raspberry Pi 4 . I've updated the design to make it fully…
The Top and the Logo can be printed together with a MMU. Added a rear fan grid intake. Added 2 screws on the bottom Added a square hole to allow the raspberry camera cable to go trough it without being damaged by the usb ports This model…
To support the strawberry plant and keep the strawberries of the ground. The support grid is cut in middle to be able to install the parts around the plant, the grid parts are snapped together using the tiny snap locks. The is also a…
Simple Circular keycap for Low Profile ZT04-Red Mechanical Switch, sold on Alixpress.
I needed a way to stack my Argon One V2 cases for Raspberry Pi 4s. I didn't really find anything that fitted my needs so decided to design one. This is my model that I've designed and made available. You can print as many of the…
A case made for mounting your Raspberry Pi4 to your Prusa i3 MK3. Smallest form factor possible for a Pi4. All peripheral ports accessible (not the Pi headers). Break away window for Pi-cam. Windows for status lights. Easy to print: no…
Agent P aka -Perry the Platypus from Phineas and Ferb
One of the sample models for the Prusa CORE One+ INDX 4T/8T. This is the popular print-in-place herringbone gear mechanism in a 4/8-color version. It can be easily printed with the default settings at a layer height of 0.15 or 0.2mm.…
Youtube Fusion 360 tutorial follow along. Tutorial called for the snap lid that you can see broke off on my print. Honestly the channeled lid fits tightly enough I removed the snap components in my file prior to uploading.
A simple but beautiful wall mount for LEGO set Ferrari 488 GTE: https://www.lego.com/en-dk/product/ferrari-488-gte-af-corse-51-42125 Printed in PETG with 0.6 Nozzle 2 perimeters 20% infill gyroid. Hole though is 6mm while the counterbore…
https://www.buymeacoffee.com/maxt ---------------------- This model goes well with another way to decorate the napkins - Christmas Napkin Ring Set, 8 different pieces Usage: Place it on a maroon napkin for your festive Christmas table…
This is a open frame chassis for Raspberry Pi 4 with 2x 2.5" HDDs/SSDs. You can mount drives with a height of 15 mm. The holes in the Raspberry have a diameter of 2,7mm. Therefore i drilled them to 3mm. BOM: 4x 20mm M3 screw (pi mount) 4x…
Easy to make a cute Cherries keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Nozzle: 0.4mm Layer: 0.2 (Recommended) Scale it as you like :)
Parameterized lube station for your mechanical keyboard switches or a simple switch display plate if you choose the cutout size to exactly fit Cherry style switches (14x14mm). How to print Orientation: Face down (no supports) Perimeters:…
Simson Tuning Lüfterrad für alle Modelle mit einem zwangsgekühlten Motor. Mit einer neuen VAPE Zündanlage. Wichtig! Das Modell passt nur auf das Polrad der VAPE Zündung, nicht auf die Originale Unterbrecher Schwungscheibe! Die Druckdatei…
Thought it'd be fun to show arrow keys some love. In most games I use IJKL to move, but back in the day, most games used the arrow keys (besides WASD) for important controls. Printing - For the Standard Version, best with a resolution of…
First of all - Thanks to uwearzt! Also thanks for sharing the Fusion360-File. This helped a ton! I modified his nice, minimalistic Din-Mount for the Pi4 / Pi5 a bit to use my M3 rivet nuts to fix the Pi4 without any Spacers and other…
Another incredible SCI FY terrain piece! This tower is made to process the toxic choking atmosphere of the incredible dirty industries that rule within the endless city-state megalopolises of the White Desert. Even the retched standard…
A set of pieces to build a water wheel featuring wood texture and pass-through connections for detail. This is a great piece because it's easy to paint and detail (can throw some basic wood colors, drybrush, throw on a dark wash) and can…
Please click if you appreciate my work :) V12 power, 1980s soul, and unmatched style. This 3D printable wall-mounted model of the Ferrari Testarossa (512 TR) pays homage to the iconic supercar of the late '80s and early '90s. With its…
This best printed with SLA printers. Can be printed on FDM printers with 0.2 or 0.3 mm nozzle. 0.4 mm can do it with 0.12 or .0.16 details. I printed it on 0.4 nozzle and came out good. =============================== Hello.. I'm a…
A simple case for a Raspberry Pi and the Sonoff ZBdongle-E, not ZBdongle-P! Pay attention, they are almost the same dimensions and look the same. I think all -E models have the label “Zigbee 2.0 USB Dongle Plus ” on them while the -P…
Serre-tete renne Le père Noël a perdu ses rennes ? Voici de quoi reconstituer son équipage ! Le serre-tête peut être imprimé sans remplissage et sans support.(Oh Oh Oh). Si vous aimez ma création... cliquez sur j'aime ! Si vous voulez…
Very nice and detailed car wall art model of a ferrari sf-90 Stradale. Size can be adjusted as wanted.
This is a remix of the Rover . I made the model so it can fit a raspberry pi 3b+, a raspicam model 3, a servo HAT and a dc Motordriver. This Model Provides all files needed. There are two python files, which need to be loaded to the…
Layer Heights Body - 0.2mm or less Windows/Legs/Lights/Eyes - 0.15mm or less Supports Body - Yes. The screw holes, mouth, and portholes need supports Eyes - Printing screw hole down needs supports for the overhangs Print Quantity Body - 1…
A sweet articulated Strawberry Buddy ready to hang out on any table or shelf! 🍓 Height: ~65 mm 🦵 Fully print-in-place articulated legs for charming movement ✨ A fruity companion perfect for your kitchen, workspace, or berry-themed…
A sweet little strawberry — tiny, bright, and full of charm! 🍓 Height: ~16 mm ✨ Perfect for dioramas, playful décor, or tiny gift surprises 👌 Fits perfectly with other miniature fruits in the series A juicy pop of color to brighten any…
Diseño del enganche de la maleta de herramientas Mannesmann 215, la parte de la pinza.
I remodeled the chassis of the Ferrari 575 GTC LM04 Evolution to fit the digital decoder (26732). Update 1: Improved model printability, removed Magnet tray between Motor and Decoder. requiered parts: Ferrari 575 GTC LM04 Carrera digital…
Case for a Raspberry Pi 4 B running Home Assistant OS with two modules : Zigbee 3.0 USB Dongle RTL-SDR Dongle for 433 Mhz devices Other components used : 30mm fan (from my previous RPi 4 case) 4x m3 insert (CNCKitchen M3 standard insert)…
change the colors to the right layers
MATERIAL Raspberry Pi 4b Raspberry HQ Camera C-mount lens. In my case a 100mm telephoto lens . Cooling housing for RPi 4b (total height below 24mm) Anker 2000PD or Anker 325 Powerbank USB-A to -C cable Threaded inserts for tripod mount. I…
A raspberry pi + screen mount on the Ender 3. It attaches to the front of the 4040 extrusion using existing fasteners. Required fasteners: 2x M5x8 - attaches mount to extrusion 4x M2.5x4 - attaches pi to mount The example shown is using…
The Air Handler System - Expansion Chamber - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these…
If the door needs do be adjusted, the handles break before the screws damage the frame of the door, so sometimes you need them new. This part does not fit to the original base, because I needed to make the groove bigger then the original,…
Ferrari 499P Hypercar #50 (2022)
The Air Handler System - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these have become the much…
The Air Handler System - Fans and Grills - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these have…
very nice wall art of one of 3 the cars that belong to the holy trinity. Size can be changed. I accept more suggestions
NB : Ce serre-livres est conçu pour les livres au format manga au vu de ses dimensions ! Conseils : Imprimez-le à plat avec un remplissage de 100 % et de préférence en ABS, mais il convient également en PLA.
Heatbed cam mount especially for Prusa i3 MK3S. It uses less filament than other solutions and needs at least possible space. You have the possibility to fasten the mount with 3 cable ties. 2 work fine too. It's Compatible with this cam…
In addition to this print, you'll need to eat a couple of boxes of Ferrero Roche. Print supports are required for the Tray! For the Pot Inserts, I printed mine in Spiral/Vase mode using a 0.4mm nozzle with the extrusion width set to 1.0mm…
1976 EXOTO TIPO 312T2 Fourth, 1976 Grand Prix of Italy, driven by Niki Lauda Nobody expected 1975 World Champion Niki Lauda to return to the cockpit after his tragic accident at the Nurburgring on August 1, 1976. In the days after the…
Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…
Very nice and classic wall art of a Ferrari F40. size can be edited as prefered
this is an original design, just reuploaded to printables https://www.thingiverse.com/thing:4783829 DISCLAIMER: I've only tested this on a gametime buddies guitar, however it does closely resemble a wii les paul, down to screw hole…
Case for 2x Pis that run pi hole and homebridge with mounts for OLED displays that contain stats and device information. Printed in 2 parts with 3mm bolts to secure parts together with 0.2mm interferance. Limitations: currently the pis…
Small 12mm spike to keep Rabbits and cat or other pets out of the garden or shed. I used 4 inch wire to hold them down. I printed with no skirt, 0.3mm layer height PLA. They are 150mm X 246mm X 12.5mm, only 25.28 g used.
This is the Pi Camera Hat - A simple hat to add a Raspberry Pi Camera to your projects. The face has plenty of room for additional LEDs or accessories, and the base of the hat includes a sturdy mounting block with standard 1/4"-20…
Stand for this model: https://www.printables.com/pl/model/190328-terraforming-mars-player-astronaut-track-token/files
I bought a Gardena berry picker but didn't have a Gardena telescopic pole. I did, however, have a paint roller extension pole. So, instead of the adapter for the Gardena system, I printed a different adapter. This one attaches with the…
Raspberry Pi 5 holder A few weeks ago I have updated my Magic Mirror central smart home display from an Raspberry Pi 4 to an Raspberry Pi 5 and needed a new holder to mount it to, because the new RP5 uses an M.2 NVMe SSD drive now and…
The Air Handler System - Tower - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these have become…
Thought it would be cool to adjust the focus on my pi cam by turning a gear. Finally got around to designing it. Printing Instructions: Resolution: 0.15 Supports: No Rafts: No Assembly Instructions: (Best to assemble on a flat surface.)…
This is a way to hold the SnapTop Cases in a small clip that can hold 4 magnets, or use Velcro or Tape. There is a pocket inside the wall that holds 4 1/2" x 1/16" D81 Magnet (K&J Magnets). There is a small frame for the magnets that can…
Introducing the 3D-printable Berry and Fruit Washer with Drainer , a two-part kitchen essential designed to simplify your fruit washing routine . The innovative design includes a base where water collects and an upper compartment with…
