Search results: fluid

Sort order

Counting matching models…

P
PrintablesDom Cis

FLUID VASE

FLUID vase. It is supposed to mimic the water currents bouncing around the boulders in a small stream still close to its source. Print instructions Top solid layers: 0 Bottom solid layers: 5 Spiral vase won't make it watertight. Top solid…

Downloads
5,310
Likes
710
Rating
4.96
P
Printablesk0rtax

Wischwasser Trichter / wiper fluid funel - seat/cupra

Trichter um das Wischwasser in einem Cupra/Set Leon und Formentor aufzufüllen. Mit Aussparung für den Haubenarm. Zudem habe ich noch eine Belüftung eingebaut. Passt sicherlich auch für andere Marken mit einem Durchmesser der Öffnung zum…

Downloads
133
Likes
14
Rating
5

Car / Windshield fluid funnel - 38mm tube

Windshield funnel made for my 2021 - model 3, wanted something way easier to pour into. the OD of the base of the shaft is 38mm and the funnel max diameter is 125mm I recommend printing in petg funnel down on the build plate with no…

Downloads
48
Likes
11
Rating
0
P
PrintablesJaKeU

Fluid Stripe Vase

This wavy striped vase is a great accessory for any flower Basic info: Print time: 6 hours Filament: Gembird Galaxy Blue PLA Size: 210 mm (maximum of MK3) Weight: 100 grams Model is solid, you have to set top layers and infill to zero.…

Downloads
43
Likes
7
Rating
0
P
PrintablesMitchelangelo

Fluid Distribution Cap - 1.5 (1-1/2) inch PVC

Fluid Distribution Cap for Hydroponic Agriculture applications or a Microgreen Machine. Distributes water to up to 8 ways. It is designed to work with 1.5" (1 ½") PVC pipe threads, and 0.25" (¼") standard rubber irrigation hoses.

Downloads
36
Likes
14
Rating
0
P

Fluid-Filled Vestibular Apparatus for Vertigo Education

Learn how positional vertigo works by watching the crystals (aka "otoconia" or "otolith") fall and move through the semicircular canals of your inner ear anatomy with this educational model. We developed this anatomical model to promote…

Downloads
1,954
Likes
97
Rating
5
P
PrintablesKalleKnall

OPEL Astra J washer fluid reservoir cap / Wischwasserbehälterdeckel 13227300

To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…

Downloads
1,607
Likes
144
Rating
4.88
P
PrintablesDJ

oil liquid fluid funnel with screw (thread) for cans - Trichter mit Verschraubung für Flaschen, Kanister Öl Flüssigkeiten

I created some funnels with different sizes of threads/screws that you will find on fluid cans for antifreeze fluids (car) windshield cleaning fluids (car) engine oil (car, motorbike) gear oil (car, motorbike fork oil (motorbike) … The…

Downloads
1,427
Likes
319
Rating
5
P
PrintablesH3dSprint

Peristaltic pump - nominal diameter Ø8mm - for fluids like cooling water, water, engine oil and other similar

All designed parts of the peristaltic pump are printed out of PETG. For the hose I have choosen silicon to avoid high forces by rotating the impeller. The hexagon shaft where the impeller is put-on have two interfaces, on one side an…

Downloads
998
Likes
236
Rating
4
P
PrintablesTm

Windshield Washer Fluid Funnel for Volkswagen Golf

A funnel that fits the windshield washer fluid reservoir for a 2016 Volkswagen Golf (and other VW/Audi models). Print settings Material: PETG Layer height: 0.20 mm No supports needed. Seam position: Random Perimeters: 8 (avoids top and…

Downloads
691
Likes
113
Rating
5
P
PrintablesChristian K

Windshield washer fluid funnel for VW / Audi / Skoda / Seat

Introduction Refilling windshield washer fluid can sometimes be a mess, but not anymore! This funnel is designed to be used when refilling windshield washer fluid with minimum waste of washer fluid. Features Handle: This funnel has a…

Downloads
665
Likes
113
Rating
4.8
P
PrintablesJohnM

Paint & fluids holder for airbrush and modelling: Wall and ceiling mounted

I designed these paint holders to store my paints on the pitched ceiling of my shed, but they'll work on a vertical wall too. They could be stuck to a wall, but they have countersunk screw holes for easy fixing. Covering most sizes of…

Downloads
620
Likes
152
Rating
5
P
PrintablesRT3D

Ford Focus 2012 Windshield Washer Fluid Reservoir Cap v3

I have a Ford Focus 2012 (Hatchback) and after 9+ years of prolonged heat, the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Update…

Downloads
561
Likes
69
Rating
5
P
PrintablesGhostbird

Washer fluid cap 51mm / 2"

Though designed for a 2006 Toyota Aygo, it may just fit your washer tank opening, as long as it has a 51mm / 2 inch diameter snap-fit rim. Printing I printed this in ABS, but most thermoplastics will probably work fine. Washer fluid…

Downloads
558
Likes
114
Rating
5
P
PrintablesGuillaume Rico

FluidNC CYD pendant case - JC2432W328C (capacitive touch)

I generated the STLs that correspond to the different cases: Bottom : WIthout RJ12 port : CYD_Dial_JC2432W328C_bottom_without_RJ12.stl RJ12 on rounded side : CYD_Dial_JC2432W328C_bottom_RJ12_rounded_side.stl RJ12 on squared side :…

Downloads
539
Likes
36
Rating
5
P
PrintablesTim B

Ford Focus brake fluid funnel

This is a funnel I created for topping off the brake fluid level for my '15 Ford Focus. Like many cars made now, the brake fluid reservoir is actually recessed under a cowl. I wanted a simple way of topping off the brake fluid level while…

Downloads
527
Likes
117
Rating
4.5
P
PrintablesRT3D

Ford Focus 2012 Windshield Washer Fluid Reservoir Cap

I have a Ford Focus 2012 (Hatchback) and after 5 years of prolong heat the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Print…

Downloads
487
Likes
57
Rating
5
P
PrintablesJohan Løvold

BMW R1200GS brake-fluid funnel for servo

I required a tool to help flush the brake-fluid in my 2005 BMW R1200GS, without introducing air into the servo-assisted circuits. And I did not want to spend lots of money and time waiting for it to arrive. As far as I know, this funnel…

Downloads
482
Likes
33
Rating
5
P
Printablesrvsuper8

Brake fluid reservoir cap

Standard Euro E20 thread. Started with another cap but the others had issues. So I made one from scratch. Needed a vent cut out and center protrusion for factory gasket support. Need to be a bit beefier to prevent cracking of the cap.…

Downloads
458
Likes
12
Rating
5
P
PrintablesLEO941

Funnel (windshield washer fluid)

The funnel was designed to fill the wiper water. To avoid stringing during printing, I recommend printing the funnel only with wall lines (vertical shells 5 lines). Der Trichter wurde zum auffüllen von Wischwasser entworfe. Damit das…

Downloads
454
Likes
97
Rating
5
P
PrintablesWardex13

poop emoji (slime / twisty grid / fluid)

poop emoji (slime / twisty grid / fluid)

Downloads
448
Likes
91
Rating
0

Case for "Fluid Dial" CNC pendant for FluidNC based on M5 Stack Dial, with printable logos, button highlights, etc, v1.0

NOTE: New as of September 7, 2024 - I added a remix of this case that supports Bart Dring's FluidDial Starter Kit. Buy Bart's FluidDial Starter Kit: https://www.tindie.com/products/33366583/fluiddial-connection-starter-kit/ Access the new…

Downloads
400
Likes
39
Rating
5
P
PrintablesRumbledoc

Nissan Micra K13 Wiper Fluid Cap

Einfacher erstatz für den Originalen Kunstoffdeckel der ständig bricht. Dieser aus TPU wird defenetiv länger halten. ------------------------------------------------------------------- Simple replacement for the original plastic cover…

Downloads
383
Likes
20
Rating
4.86
P
PrintablesJohination

OPEL Wischwasser Trichter / OPEL wiperwasher fluid funnel

Printable without support! my print settings: Rafts - Brim: YES Supports: NO Nozzle: 0.4 Resolution: 0.28 Infill: 100% Material: PLA Brand: Extrudr Color: Black

Downloads
368
Likes
69
Rating
3
P
PrintablesTimATX

GMC Windshield Washer Fluid Reservoir Cap

Replacement cap for my reservoir on my 2014 Sierra. I printed mine in TPU for flexibility.

Downloads
362
Likes
40
Rating
4.5
P
Printablesisaacramirezd

Citroen C4 Wiper Washer Fluid Cap

This is a threaded cap for the wiper washer fluid tank of a citroen C4, it consists of two pieces. The first piece fits by preasure and the second one screws to the first one acting as a cap. I'm not sure if it can fit other citroen…

Downloads
361
Likes
37
Rating
5
P
Printableszababa

Washer fluid funnel

Windshield washer fluid funnel for Skoda Octavia 2, Fabia 1/Octavia3

Downloads
359
Likes
54
Rating
5
P
Printablestaeraeyttaejae

Peugeot 308 windshield washer fluid tank cap (maybe other models/makes also)

Print with TPU or some other flex/semiflex material. Go slow with logo, or preferably print the nologo -version without the nitty gritty small details. Test fit showed a good tight,but not too tight fit. edit: 9.3.2018 - added a version…

Downloads
350
Likes
43
Rating
5
P
PrintablesQuinn

Microfluidic Gradient Generator

This is a macro version of the microfluidic gradient generator technique (and geometry) presented in Cabaleiro 2020, doi:10.1016/j.cej.2019.122742. Ref. the supplemental data (3d models are included there). This could be promising for…

Downloads
336
Likes
24
Rating
0
P
PrintablesHydrotatic

GuardCap - Windshield Wiper Fluid Cap Replacement

Five years ago, I faced a broken windshield washer cap in frigid Canadian weather. Frustrated with waiting for an OEM replacement, I designed my own. I've desinged a range of caps for various Ford vehicles. Tested on multiple models,…

Downloads
333
Likes
70
Rating
5
P
PrintablesMichael Schmitz

Wiper fluid funnel Smart 451 - Wischwassertrichter Smart 451

I was pretty upset the way Smart designed the intake for wiper fluid, made a funnel for it. Ich war ziemlich ‘bedient’ wie Smart den Wischwasserbehälter designte, hier mein Trichter dafür.

Downloads
333
Likes
49
Rating
5
P
PrintablesG3ox

Car windshield wiper fluid hose joiner

This model is meant to be printed on it's side with build plate supports at a 0.1 or similar layer height. After printing use a small drill bit to clean the inside hole and also sand the outside surfaces to make the hose fit better. I…

Downloads
307
Likes
32
Rating
5
P
Printables3DRK2

Fluidock

Diseño fluido, simple, elegante y funcional. Este soporte para móvil es un claro ejemplo de como un diseño simple puede ser robusto y funcional a la vez. Fluid, simple, elegant and functional design. This mobile holder is a clear example…

Downloads
305
Likes
20
Rating
5
P
Printableskoen

OPEL Astra J washer fluid reservoir cap 13227300

To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Printed in PETG The frame STL is identical to the original, only the lid has modifications.

Downloads
300
Likes
23
Rating
5
P
PrintablesJim

funnel for ford focus 2 (windshield washer fluid)

funnel for ford focus 2 (windshield washer fluid) or other with hole bigger than 32mm. Printed with PLA (use brim, no supports)

Downloads
298
Likes
46
Rating
5
P
PrintablesTomzi1234

Brake fluid cap for brake bleeder

Just a quick design of a brake fluid cap with attachment for a hose, for bleeding brakes. Print Settings Printer: Sapphire Plus Rafts: No Supports: Yes Resolution: 0.2 Infill: 10 Filament: 3d Jake PLA PLA Orange Notes: i printed it upside…

Downloads
290
Likes
29
Rating
0
P
PrintablesEdward D

Dacia / Renault Duster Mk2 Washer Fluid Filter Insert

My 2021 Duster was missing a washer fluid filter so I modelled and have test fitted this version. NB this will only block ~1.5mm objects like leaf litter. Will not block sand! Tips: Ensure you have retraction dialled in to prevent…

Downloads
286
Likes
35
Rating
5
P
PrintablesRadu20

Ford Fiesta MK6 Windshield Fluid Reservoir Cap

My 2006 Fiesta windshield water reservoir cap just crumbled in my hand. So I decided to design and print my own. This is my third attempt: in the first one, I messed up the dimensioning a bit, second one went better and actually mounted…

Downloads
267
Likes
19
Rating
5
P
PrintablesKirk.D

Windshield Washer Fluid Cap

This is a replacement windshield washer fluid cap for a 2010 Land Rover LR2 (I haven't tested others but I expect it may fit other models). While filling up the windshield washer fluid one day, the cap popped off and was lost. No problem,…

Downloads
262
Likes
22
Rating
4.67
P
PrintablesDedoper

Peugeot 3008 Washer fluid tank cap

Windshield washer fluid tank cap for Peugeot 3008 (1) year 2009/2016. Diameter tank neck 57mm TPU print. Filament TPU Flex Nozzle 0.4 Layer thickness 0.20mm In-fill 15% Printing upside down with support on the edge and axis of the…

Downloads
257
Likes
33
Rating
0
P
PrintablesOtto Rasmussen

SAAB 9-3 Washer Fluid Reservoir Cap Dual extrusion

I did a remix to be able to either replace the logo with whatever or print it with extruder 2 using another color. It worked out nicely. Also it is possible to print the cap itself with the flat top now facing the print bed. That way, it…

Downloads
256
Likes
23
Rating
0
P
PrintablesShay

Windshield washer fluid reservoir cap for Suzuki Splash

Print with TPU, 3 or more walls, 0.2mm layer

Downloads
244
Likes
22
Rating
4.67
P
Printablescuchty

Windshield washer fluid funnel - Skoda

can be left next to car battery for everyday use. it fits in my octavia 3 Brim is nessesary!

Downloads
239
Likes
38
Rating
5
P
PrintablesC B

Phone Holder Fluidock_Mod22

Fluidock Mobile Holder Mod22 With this modification , you can use the screen to the bottom ! Printer : Artillery Sidewinder X2 layer height : 0,1 line width : 0,6 no support ; infill 0% ; print time ~ 5 h 40min Sunlu PLA Silk Gold…

Downloads
234
Likes
25
Rating
5
P
PrintablesKarl

BMW K1200 Brake Fluid Funnel

A simple tool designed for a friend, to help bleed your brakes on BMW servo bikes. BMW charges an unbelievable amount for these funnels so this will save you significantly. Replaces the OEM part number #341580 Should work with R1150R,…

Downloads
218
Likes
10
Rating
5
P
PrintablesJani Sivonen

Saab 9-5 Washer fluid reservoir cap

Washer fluid reservoir cap with griffing logo for saab 9-5 Tested on 1998 9-5, reservoir changes atleast on 2006 so this might not fit. There is two versions of this cap, one has a tighter fit and other looser. Print with supports logo…

Downloads
217
Likes
14
Rating
5

Case for FluidDial CNC pendant for FluidNC, w/ M5 Stack Dial, v2.0 - new w/ support for FluidDial Starter Kit sold by Bart Dring

UPDATE: Newly posted as of Oct 12, 2024: FluidDial CRADLE v2.0 - for LowRider v4 (attaches to YZ plate on X-min side) - https://www.printables.com/model/1037601-fluiddial-cradle-v20-for-lowrider-v4-attaches-to-y …now back to your…

Downloads
216
Likes
34
Rating
5
P
PrintablesTroyjones

Windshield Washer Fluid Cap

Windshield Washer Fluid Cap - With and without print-in-place hinged lanyard. Example in photo was printed using PETG 100% infill without support or brim to fit 1998 Nissan Frontier. (2.25 inch)

Downloads
213
Likes
19
Rating
0
P
PrintablesSebastian3

Washer fluid cap for rear tank // BMW e46

Since my cap was broken i remodelled the original part. There are two versions as the original part has a lash to secure the cap. I printed the version without the lash in TPU without support. Print settings: Material: TPU (recommended)…

Downloads
213
Likes
32
Rating
0
P
PrintablesKs8hdf7

US Gallon - Milk Jug / Washer Fluid Container Cap with Connected Turbo Funnel for Disposing Fluids

Works with US Gallon milk jugs and US Gallon windshield washer fluid containers. Push down and twist, some effort is likely necessary. Printed with the gallon cap side on the plate at 0.16 layer height due to the overhangs. Recommend…

Downloads
211
Likes
28
Rating
5
P
PrintablesFilip

Triumph Brake Fluid Cap

Cap for brake fluid reservoir of Triumph motorcycle.

Downloads
202
Likes
19
Rating
0
P
PrintablesCheesewizz

Zippo lighter fluid saver mods

Updated 17-10-23 Bottom gasket flint screw hole clearance increased, incorporated a fillet to the sleeve logo to lessen the effect of the overhang and give a cleaner look. Small quality of life improvements to lessen fuel evaporation for…

Downloads
195
Likes
30
Rating
5
P
PrintablesRichiH

Lighter fluid flame race tracks - fun with fire

ATTENTION This is a super fun teaching toy, but you are literally playing with fire. My first print burned to a sludge because I had too much gasoline in it. But I did it on a large non-flammable surface and had water and fire…

Downloads
188
Likes
46
Rating
5
P
PrintablesChrischris

Tesla Model 3 and Model Y Windshield Wiper Fluid Cap

Are you as stupid as me, breaking your windshield fluid cap on your precious model 3? And you don't want to spend big bucks on a piece of plastic that costs less than a euro/dollar to produce? I broke mine, and I was quoted 100 euro for a…

Downloads
187
Likes
35
Rating
0
P
Printablesaroo

AR Ford Fiesta MK6 Windshield Fluid Cap

Remixed from https://www.thingiverse.com/thing:3769718/comments Modyfield construction, and working good ;) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: you choice…

Downloads
184
Likes
22
Rating
5
P
PrintablesJunckerLab

3D-printed functional, ready-to-use microfluidic chip

Karamzadeh, V., Sohrabi-Kashani, A., Shen, M. & Juncker, D. Digital Manufacturing of Functional Ready-to-Use Microfluidic Systems. Advanced Materials 35, 2303867 (2023). https://doi.org/10.1002/adma.202303867

Downloads
181
Likes
4
Rating
0
P
Printablescwennet

2011 Volvo S40 Windshield Washer Fluid Reservoir Cap

Windshield washer fluid reservoir cap for a 2011 Volvo S40. Includes a very small vent hole in one of the portions of the icon. It fits very well on my S40. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…

Downloads
166
Likes
17
Rating
0
P
PrintablesLIBRE hub

Microfluidic test channels

How small of a channel can you print? Try with this test model.

Downloads
165
Likes
13
Rating
0
P
Printableslayer.works

Paint/Fluid Stirring Stick

Needed a stick to stir some spar varnish with, but didn't have anything handy: made one. For use with a quart sized container (approx 1L). Scale as you please… Print instructions Download. Slice. Print. Summary Print. Stir. How I Designed…

Downloads
160
Likes
31
Rating
5
P
Printablesz4h0n

Ford washer fluid reservoir cap

Clicks in, stays on. Print with supports Recommended materials - ABS, ASA, PETG or similar- PLA not suitable for engine bay use. Suitable substitute for 1250896 , 3M51 17632 AB etc. Tested on a Ford Galaxy Mk.II 2007

Downloads
157
Likes
12
Rating
0

Fluidic Planter

This started as a well designed option for a very popular 3d printed self watering planter, you'll be able to print this right off of here, This prints with supports and to make it completely waterproof you might have use wood filler or…

Downloads
155
Likes
57
Rating
0
P
PrintablesJW

Washer fluid lid

Washer fluid lid for cars, 55mm diameter, Peugeot Partner, Citroen Berlingo and other models. The lid keeps the washer fluid safe for dirt if you are missing the original lid. Designed to fit direct on filler-neck. Fits well, a bit hard…

Downloads
154
Likes
14
Rating
5
P
Printablesmttcx

DIN mount for 6x CNC Controller for FluidNC

This model has 2 parts, a Backplane which uses M3 heated threaded inserts to fasten the 6x CNC Controller for FluidNC, and a latch which slides into the bottom of the Backplane, locking the Backplane to the DIN Rail. Optional ‘spacers’…

Downloads
154
Likes
15
Rating
5
P
PrintablesHarms3D

Vase #5 - circle Fluid Pattern

A small plant pot that I created in 4 different designs. If you want to scale the plant pot correctly, simply insert a cylinder with the necessary dimensions in Prusaslicer and then scale the plant pot in such a way that the cylinder fits…

Downloads
151
Likes
62
Rating
0
P
PrintablesKiwi Tinkerer

Paint Blow Straw Attachment Fluid Art Flexible

These straws have a 6.4mm hole in the base that fits a 5.8mm metal straw tight. Let me know if you want a Specific size hole. I use Flexfill 98A to print these for best looking results I make sure the seams are printed aligned on the…

Downloads
149
Likes
15
Rating
5

Vented Funnel cap for Washer Fluid Bottle V1 & V2

easily reuse empty bottles -washer fluid -antifreeze / coolant, -used oil, etc...

Downloads
147
Likes
32
Rating
5

FluidDial Pendant CRADLE v2.2 - for LowRider v4 (attaches to YZ plate on X-min side)

Heads-up: There's a new version of this: v2.3 — The only change in that remix was to make a bidirectional version of the cradle. Works no matter which side of the gantry you attach it. — Get it here:…

Downloads
145
Likes
32
Rating
0
P
PrintablesJJ Hontebeyrie

DIY FluidNC Controler Deluxe

FR Toutes les pièces imprimées en 3D pour vous construire un contrôleur paramétrable et disposant de très nombreuses fonctions. Des fichiers VCarve et graphiques sont aussi proposés pour réaliser la découpe des façades de ce contrôleur…

Downloads
140
Likes
12
Rating
0
P
Printablesntruchsess

BMW i3 washer fluid funnel

Can be printed ‘as is’ (large side facing upwards) with no supports, brim enabled. Diameter (smaller end) is 48mm.

Downloads
139
Likes
21
Rating
5
P
PrintablesJunckerLab

Microfluidic ELISA chip

Microfluidic ELISA chip Scan the QR Code to view the video of the chip in operation. Shafique, H. et al. High-resolution low-cost LCD 3D printing for microfluidics and organ-on-a-chip devices. Lab on a Chip (2024).…

Downloads
139
Likes
8
Rating
0
P
PrintablesBeaver

Mazda 3 Windshield Wiper Fluid Reservoir Cap

This is a replacement cap for your windshield wiper fluid reservoir. Fits the 2015 Mazda3, and probably many other models of cars.

Downloads
138
Likes
11
Rating
5
P
PrintablesAtomique13

Windshield washer fluid funnel - Skoda with hole

For better strength and watertightness, use the following settings: Walls: 3 Layer height: 0.3mm Line width: 1mm (0.8mm should work for most hotends if 1mm is too much) Wall generator: Classic (Arachne doesn’t work well with this model)…

Downloads
134
Likes
17
Rating
5
P
PrintablesHarnik3d

Tesla Windshield fluid reservoir full cap

I reverse engineered the original cap which was broken at the joint. I tested with PTFE and TPU. - PTFE has a better fit and look , but fatigue is untested. TPU fits well and will last longer. Print with 3 walls - 15% infill Supports…

Downloads
134
Likes
8
Rating
5
P
PrintablesPracticalPrints

Brake fluid temporary cap

Known to fit both a 2005 Hyundai Elantra and a 1996 Ford Mustang 4 (will likely fit several other models). I lost my brake fluid cap somehow while working on my brakes (likely in some blackhole in the engine bay). So I created this as a…

Downloads
134
Likes
6
Rating
5
P
PrintablesSliced Cheese

Large Fluid Pencil Stand

The Large Fluid Minimalist Pencil Stand, a sleek and elegant accessory designed to bring a touch of softness and sophistication to your workspace. With its smooth, rounded edges and fluid design, this stand holds up to 10 pencils or pens,…

Downloads
132
Likes
31
Rating
0
P
PrintablesMakangry

The VAG windshield washer fluid reservoir funnel

-- EN version -- VAG windshield washer fluid reservoir funnel (Volkswagen, Seat, Skoda, Audi...), 40 mm diameter. Printing instructions: Print with 100% infill. No need to use support if printed upside down. If you like this item, you can…

Downloads
128
Likes
19
Rating
5
P
PrintablesJunckerLab

Embedded microfluidic mixer

Embedded microfluidic mixer Shafique, H. et al. High-resolution low-cost LCD 3D printing for microfluidics and organ-on-a-chip devices. Lab on a Chip (2024). https://doi.org/10.1039/D3LC01125A Category: Engineering

Downloads
128
Likes
4
Rating
0
P
PrintablesRemiRafael

Syringe "squeezer" to filter viscous fluids

This tool is a squeezer i use to force a viscous fluid through a syringe filter. In the off chance that like me, you need to filter a syrup like fluid through a syringe filter, you will find it much easier to do with this than by hand...…

Downloads
125
Likes
50
Rating
0
P
PrintablesDissendat

Zippo Fluid Holder Gridfinity

Zippo fluid can holder that is compatible with the Gridfinity system.

Downloads
123
Likes
18
Rating
5
P
PrintablesKusado

Tesla Model 3 and Model Y Windshield Wiper Fluid Cap with flap

Cap for tesla model3 windshield fluid tank.

Downloads
122
Likes
9
Rating
5
P
Printableshumming

Isuzu Washer Fluid Cap

washer fluid cap. Snaps on and stays tighter than the OEM one. Print it in ABS with the design down. Print without supports and with 4-5 perimeters. If you'd like to make a donation to say thanks for providing this model, there's a link…

Downloads
121
Likes
6
Rating
0
P
PrintablesSorin B

Ford Puma 2020 windshield fluid funnel

The funnel can stay on its own and prevent the spillage of the windshield washing fluid over the electrical equipment. I printed it on ABS, at 0.28mm resolution and 25% infill

Downloads
115
Likes
21
Rating
5
P
PrintablesTinkerTiger

Ford Focus (2011) Windscreen Wiper Fluid Reservoir Cap

I lost the cap for the windscreen wiper fluid reservoir of my Ford Focus 2011 Stationwagon, so I whipped up a new one to replace it. Probably best to print in PETG which is more resistant than PLA. Could potentially fit other reservoirs…

Downloads
114
Likes
17
Rating
0
P
PrintablesJustin Setchell

Trabant 601 Windshield Washer Fluid Pump Nozzle

The nozzle at the end of the windshield washer fluid pump broke on my Trabant. This is were the hose connects to the pump to send the fluid to the sprayers and spray the windshield. The pump still works just fine, but with no hose…

Downloads
112
Likes
14
Rating
0
P
Printableschrbau

Flow control/valve (fluid and air) (IV style)

No more knots in tubes :-)! This quick print easily regulates water and air flow with fine adjustments possible from free flow to a veery slow dribble on to a complete stop. My tubes have an outer diam. of about 5-6 mm but it will work…

Downloads
109
Likes
15
Rating
5
P
PrintablesFluidity

Fluidity Foilsurfing wing.

Design wingspan is approx 980mm, longest section front to back is approx 220mm and chord at fuselage position is approx 30mm , Profile scales smaller toward wingtip while keeping generally same shape apart from some modification by the…

Downloads
108
Likes
6
Rating
0
P
PrintablesAfruzu

Spout pouring olive oil (or other fluids)

To transfer the oil from the 5 and 10 liter cans it is always a great effort, especially when the can is almost full. I therefore designed a pouring spout, suitably equipped with the necessary air intake, which is screwed onto standard…

Downloads
107
Likes
22
Rating
5
P
PrintablesJürgen_B

Parametric Funnel for Fluids (FreeCAD)

I needed some funnel to change some fluids from one bottle to another bottle. Or the Rest of fluids from the old into a new bottle or simular. But the most bottleneck have a different diameter. So I made a parametric funnel in FreeCAD.…

Downloads
107
Likes
9
Rating
0
P
PrintablesRico

Honda Africa Twin 1000 CRF Rear brake fluid reservoir guard (3d Printer and Laser cut)

You can buy these guard from the UK (34€ + delivery), but it´s very expensive. So I made my own ^^ . The 3d model was only the prototyp (after two paper modells), that it fits propertly. I make it a bit stronger, so you can use it instead…

Downloads
106
Likes
9
Rating
0
P
PrintablesRick269

BMW E92 washer fluid reservoir cap

Just a replacement washer fluid reservoir cap for a BMW E92. Insert included if you would like to print in a contrasting colour. Recommend printing upside-down, flat on the print surface. I know these are cheap to buy but “I can 3D print…

Downloads
102
Likes
18
Rating
5
P
PrintablesSpudd78

Funny Sign - Coffee the starter fluid for the morning impaired

Funny Sign - Coffee the starter fluid for the morning impaired Model is a multi-object file to make it easy to colour the text. (Select “Xray” view in the 3d viewer to see the text on the multi-object file) Smoothest results come from…

Downloads
98
Likes
31
Rating
0
P
PrintablesBXCWorks

Starting Fluid Can Holder (works for beer too)

I needed a place to store starting fluid that was readily accessible, yet not on a shelf with the rest of the stuff in my shed so I modeled this up. This fits a standard can of Lucas Oil starting fluid and fastens to whatever you'd like…

Downloads
96
Likes
17
Rating
5
P
PrintablesJJ Hontebeyrie

Controleur FluidNC V2

On a réalisé sur la chaine un controleur FluidNC compatible avec des CNC type Genmitsu PROVerXL 4030, les steppers étant internes. Cette version propose la même chose mais sur une CNC avec les steppers intégrés sur les moteurs. Nous…

Downloads
92
Likes
3
Rating
0

Cradle for FluidNC Dial Pendant on YZ plate of LowRider v3 CNC (v1.6)

NOTE: There are now 3 editions of this (two with magnets, and a third without magnets): 1st edition - GET IT HERE - magnets on outsides, with opposing magnets touching 2nd edition - GET IT HERE - magnets on insides, with opposing magnets…

Downloads
91
Likes
13
Rating
0
P
PrintablesClément Léger

Pibot FluidNC enclosure

Enclosure similar to the acrylic one available on the pibot website. Added more openings for high power connector. No fan.

Downloads
89
Likes
4
Rating
5
P
PrintablesEugene

Honda Civic Ferio 1998 washer fluid lid

Honda Civic Ferio 1998 washer fluid lid Print Settings Printer Brand: Anycubic Printer: All-metal Mega Supports: No Infill: 100 Category: Replacement Parts

Downloads
89
Likes
12
Rating
0
P
Printablescraiglink

DIN Mountable case for FluidNC 6x CNC Controller

Attach 2 PCB DIN clips with 2.4mm self tapping screws to the printed base.

Downloads
89
Likes
3
Rating
0
P

Washer fluid cap for 200sx S13

If you have S13 and the measured diameter what is shown on the picture is 57-57,4mm, this cap fits for you. I am printed it with ABS and heated the link between the cap and holder ring, to fold it together, but PETG works also I think.…

Downloads
88
Likes
9
Rating
0
P
PrintablesCecu Pauta

Mitsubishi Pajero/Montero/Shogun brake fluid reservoir cap

This is a temporary replacement cap for the brake fluid reservoir on a Mitsubishi Pajero 4th generation (Montero/Shogun). I suspect this would work for other Mitsubishi cars. I have made this out of ASA, however I believe that brake fluid…

Downloads
87
Likes
5
Rating
0
P
PrintablesAndreDesigns

Smart For Two washerfluid cap

A friend of mine broke their Fluid Cap because it got brittle and there were no spare parts on the internet and not even the dealer could provider her one. so i did what everyone would do, open up Fusion design a new Cap and print away.…

Downloads
87
Likes
17
Rating
0