509 models
Instructions For assembly you first need to print all three parts and proceed with the following steps: Grab the rotary part, an soldering iron and your two M4 threaded inserts. Install both inserts at both sides as seen in this video.…
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
A minimal case for the Framework Mainboard. Prints in only two pieces, unlike most, and fits on a standard MK4 print bed (or equivalent size). In the name of minimalism and size, this case has no support for the USB modules, audio board,…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
Since all of the feet I could find were for the dGPU version I quickly modeled one for iGPU, because I couldn't get proper airflow when using on bed. Now it works perfect.
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
Design The M!N!MAL case series was crafted through experience with all Raspberry Pi generations, from Zero to Pi 5, so we thought it was time to scale up. Now, we’re introducing the M!N!MAL case for the Framework mainboard. The goal of a…
Print approx. €10.47–€12.80 excl. taxPreliminary estimate for PETGSource material: PET
Framework 16 with dGPU ONLY - It works great. I have been using this printed and so far - it's great!!! I recommend printing in PETG with at least four perimeters and 0.2mm layer height. It does need some supports. The holes should each…
Print approx. €15.31–€18.71 excl. taxPreliminary estimate for PETGSource material: PET
My inspiration for my FRAMEWORK Mainboard enclosure is based on one of my favourite Japanese anime. The enclosure is designed to safely house a FRAMEWORK 12 Mainboard, including space to install Power Board, Audio Board, and Expansion…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
This is an addon to the expansion card for the framework laptops, which can hold the stylus. This is especially useful for the laptop 12, as you will usually use a stylus with that one. The Clip: The clip is rather sturdy and relatively…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
This 3D-printed model showcases an intricate truss system inspired by traditional and modern architectural roof designs. The open, lattice-like structure elegantly reveals the complexity of the underlying framework, highlighting the…
Print approx. €3.99–€4.87 excl. taxPreliminary estimate for one variant
This is openGrid, a general use wall and desk mounting framework/ecosystem. openGrid uses an opinionated design, focusing on ease of use and a clear structure for all the base parts. Still it is mainly meant to be extended by everybody…
Documentation for the Mainboard in the Framework Laptop 13 (available at https://frame.work/marketplace/mainboards ). We designed the Framework Laptop 13 Mainboard from the start as a standalone module to make upgrades easy in the…
UPDATE: 1.51 -reduced amount wifi card sticks out (11/25/24) UPDATE: 1.5 Has been released! -The case has been reduced in size and enforced in key areas. -Added external screen controls. -New power button, still goes missing but it's new!…
Alternative shell model for the Framework Laptop expansion cards. I didn't like the official expansion card 3D model as it prints vertically, isn't fully enclosed, and didn't fit very securely in the expansion slots. So I made my own. Two…
Check out the new Framework x Cooler Master Mainboard case for US$39 BE CAREFUL the power button might get you into trouble. Currently only has the reference designs from Framework. Custom designs coming soon! Stay up to date on the…
This is designed to hold two regular expansion cards, plus the ethernet adapter and screwdriver. If you want the case to stay together you will need to install sixteen 5x2mm magnets. 2-part epoxy works the best for securing the magnets.…
A simple case to store all of your framework laptop expansion cards. It fits 4 “normal” expansion cards and the lan adapter. You also need 16 5x2mm magnets for the assembly. Any 2-component adhesive should work. 10% infill is more than…
This custom side panel for the Framework Desktop mini-PC can make it run 5-7dB(A) quieter combined with the custom fan duct. See this blog post for further info: https://noctua.at/en/how-to-make-the-framework-desktop-run-even-quieter
This custom fan duct has been designed for use with our custom side panel for the Framework Desktop mini-PC. In combination, both parts can make it run 5-7dB(A) quieter. See this blog post for further info:…
3D model of the touchpad spacer for the Framework Laptop 16 with improvements for tolerances. Recommendations: Print with supports (for the hooks) Leave the spacer on the build plate until it cools down to prevent warping Print with a…
Laptop stand for the Framework laptop . Has notches that align perfectly with the feet for extra retention and a cut-out ensuring that none of the fan vent area is blocked. Feels quite ridged and seems to help with cooling a bit. I…
More information: https://github.com/FrameworkComputer/Framework-Laptop-12/blob/main/Mainboard/2D/Framework_Laptop_12_MB_Generic.pdf L aptop 13 Mainboard Case for inspiration: On board Power Button location:
Here you can find the complete guide for lightweight, wearable articulated wings! (can be used as additional hands, or whatever you choose. Original designation is not a limit whatsoever) I'm bad at small talk, but if you need them, then…
There is a version designed for use of self-tapping M2 screws, and also a version that can accommodate M2 threaded inserts.
Here it is! If you seen my previous video you have probably been waiting for this. I will have to warn you guys though, this is not an easy project. I cannot provide technical support if you try to make this and have issues. This is a…
Changed features provided in images; Much better airflow - including larger ventilation holes, rounded airflow paths, and additional airflow paths Ethernet Port - I read reviews from the original model and added a larger adapter port for…
This is a device that will hold the expansion cards for you Framework Laptop. It is designed with the schematics and made to be the same dimensions as the laptop itself. It holds the USB-C port with friction and has lasted me several…
Overall dimensions: 300mm*130mm*187mm disclaimer: I do not own a framework mainboard, and i have been using technical drawings and templates to fit the mainboard. Dimensions should be correct, but please contact me if any issues are…
I wanted to have a simple one piece stand for the Framework Laptop to increase airflow and make it a little more ergonomic. The solutions I found online were all a little too complicated for my liking, so I created my own. Features: it…
Framework 13 Laptop Stand I wasn't pleased with the existing Notebook Stands, as the Framework 13 has the tendency to move around far too much on those stands. So I made my own design. The rubber feet on the bottom of the Framework 13…
This is a set of custom tiles that slot into the front panel of the Framework Desktop computer ( https://frame.work/desktop ). The design files at https://github.com/FrameworkComputer/Framework-Desktop were referenced for dimensions and…
They slide-on easy and don't fall off, even if you pick up the laptop/move it around. Be sure to de-burr the edges to reduce friction. Note: Only works on the Framework 16 w/Graphics Module
My first 3D model is of the Framework laptop and I thought I’d share it here in case it helped anyone. The dimensions should be accurate to +/- 0.5mm, better in smaller areas where I was able to measure with micrometers, say +/- 0.1 mm. I…
Ever wanted to have your FW13 battery be part of your printed desktop setup? Just me? Fine. I use my FW13 mainboard as a small home server and wanted it to have its original battery in case of a power outage, as you would have a UPS with…
I wanted something small to carry around my extra Framework expansion cards, but didn't find anything I liked. So I made my own. Inspired by this design: https://www.printables.com/social/455549-y758xg4awx/about but I don't need to carry…
This simple 1x1 Gridfinity block holds 4 Framework laptop expansion cards, handy for holding any spares you have. This can fit one of the ethernet cards , but it may be a little top-heavy so magnets/a weighted base are recommended in that…
A remix of BurgessG's remix of ChiMuFeng's laptop stand specifically to fit the Framework Laptop. Reduced the hook's width to match the thinness of the base and made a groove for the laptop's front feet to slide into so that there's…
I also add the freecad file in case anyone wants to make modifications or corrections. The model is designed with version 1.0 RC2. In the previous stable version (0.21) of freecad it may give some errors.
Do you plan on upgrading your Framework laptop? Do you need to fix a component? The Framework parts tray is designed and tailored specifically for use with the Framework laptop. With spots designed to fit both the audio and wifi board,…
Quick little framework expansion card holder. Includes 4 piece dock with a spare 1 piece that can be stacked to be as tall as you'd like
The Framework laptop comes with Expansion Cards. You'll probably find you need to carry some with you. I designed this box to carry four of them. The box holds them with a clip inside the USB hole. The features print-in-place lids kept…
Another web camera mount… I wanted a mount to clamp onto the framework of my tent enclosure and this one suits pipes with a diameter of 16 mm. The base ends up in a GoPro fitting to directly mount a webcamera, or extend it with more arms…
This is a vertical laptop stand for the Framework 13 laptop when the lid is closed. I designed this model based on the CAD files provided by Framework, so the laptop should fit snugly into the stand. According to Framework , it should be…
3D Printable Tablet Case for Framework Laptop The ethos for this project being is to make as few changes as possible to convert a Framework Laptop to a tablet form factor. In this case, I've used as many OEM Framework parts as possible.…
I've been using ThinkPad laptops for a couple decades now at work, and have been very spoiled with the availability of docking stations. Most docking stations require the user to lay the laptop flat on the device, line up edges and then…
This tile was designed from scratch by me in OpenSCAD in accordance to the specification provided by Framework but with 3D Printing in mind. Why this tile over others (including the official one)? 1. Designed specifically for the 3D…
When I got my Framework laptop, I did not just get enough extension cards to fill the 4 slots in the laptop. I got enough to handle several different use cases that I could imagine. When they arrived, I decided that the containers they…
The original has people complaining that the hooks are really easy to break; I changed a few things to address that: I filled in the hooks to be solid. The original was the same as the injection molded version, and the walls were very…
The unofficial Framework Desktop Tile Generator is an OpenSCAD file for generating blank Framework Desktop front panel tiles at all possible dimensions, from a single 1x1 tile to a 3x7 full-cover plate. There are two included variants for…
If your laptop folds open 180 degrees flat like the Framework 13 does, then you can significantly improve your workstation ergonomics by letting it stand vertically. This raises the screen closer to your eye level, reducing neck strain.…
Link to full description: https://community.frame.work/t/travel-expansion-card-holder-with-lid/49662 With outstanding support through Discord, here is v3 of my expansion card case! It is designed to "snap" closed and when open, the cards…
John Wick silhouette with framework
These are three designs for vibration dampening feet for 3D printers, incorporating standard 40mm squash balls. The models are designed for 3D printers that have 2020 or 2040 extruded aluminum frameworks (Ender 3, 5 10, etc.). The models…
Version: 1 Latch designs used from https://www.printables.com/model/804797-framework-laptop-16-trackpad-spacer
The Framework Ethernet Expansion Card has a thicker profile than the rest of the expansion cards and as a result protrudes from the bottom of the Framework Laptops and is incompatible with the standalone cases for the Framework Mainboard.…
LTT asked, I delivered. Revised model with better bridge and guards preventing cup/glass/can from falling onto laptop.
W.I.P. If you upgraded your display and have an extra sitting around, this model is for you This model consists of 4 sections. The front screen bezel meant to be 3d printed screen screws into this part mostly finished, would be improved…
Inspired by my very first server, which happened to be an old laptop, I bring to you the 19-inch rack mount adapter for the Framework Mainboard. Breathe some new life into your old board! It can also be used as a desktop case if you don't…
I wanted somewhere to securely backup my ever-growing pile of photos and documents, so I designed this small file/media server around the Framework 13 motherboard/battery. They're used in a pair for dual redundancy. Its main features are:…
This is a simple cover to protect the surface of the 13" Framework laptop. I designed this to be thin, easy to attach and remove, and printable on my MK4. Two version of the center piece are included. One solid and another with a hole to…
This project extends the Framework philosophy of making “fantastic devices that are easy to repair” to creating a high-performance cluster from Framework Mainboards. The model files include all components necessary to make a chassis to…
3D Printable Mounts to adapt Framework motherboard to Micro-ATX Motherboards and Cases Feel free to remix/mod to your needs. Uses standard sizing and mounting points. Any board smaller than Micro-ATX is too small for Framework Motherboard…
I printed the official framework 16 mainboard case and found that the design was lacking in support for the expansion cards, resulting in the cards sagging and stressing the USBC port. You will need to print 5 connector pins to join the…
Gridfinity 1x1 expansion card holder, now fits the Ethernet card. 1 slot is slightly larger to hold the Ethernet card, the other 3 are unchanged for other expansion cards.
A quick tile design using the file provided for the Desktop Framework system, featuring the same pattern as LEGO.
3D Printable Mounts to adapt Framework motherboard to ATX Motherboards and Cases Feel free to remix/mod to your needs. Uses standard sizing and mounting points. Any board smaller than Micro-ATX is too small for Framework Motherboard to fit.
Assembly Video - Parts List: Keyboard PCB (61 Key) PCB (64 Key) ADT-Link T3B-T1C 25cm WiFi Antenna Mainboard Screw Kit Keyboard PCB Screws Threaded Inserts 3mm Magnets Power Button(Optional) Power Shim (Seller On Break)
If you're sitting with the laptop on a comfy frizzy blanket you might be worried that it will inhale some of the fibers or that its air intake gets blocked. Likewise, when you have the laptop directly on your lap, you might feel your legs…
Remix of the Framework Industrial Mainboard Case by @Magmabow. It removes the expansion card slots so that it's easier to plug directly into the USB ports on the main board. It also makes it so that it can be printed in two pieces on a…
Requires M3x12 SHCS and nut to assemble Print with .4mm nozzle and .5mm line width .2mm layer height No supports necessary Print with at least 3 walls Tested with PLA, but will probably work with PETG
This is a case for the Framework mainboard. This is based on the original design (very rigid) but slimmed down to work in one print and removed the unnecessary ports I was not going to use. If you want to use the framework as a blade…
This is a remix of Szymon's excellent model. All I did was make it one piece, since it will take the USB plug diagonally and you can just push it in then. No screws necessary. Print settings (PLA, 0.2 mm layers, Bambu Studio…
Made an accessories container for the extra ports and 10-key/macro pad. I made parts 1 and 2 available as separate models as well as removing the screw holes and handle in case you don't want the handle in the design. Printed lid is…
What do bandit camps, archeological dig sites, war camps, traveling troupes, and forest camps all have in common? Work tents! I love tents as scatter terrain for rpgs, but I find the most tedious part of crafting them is getting the core…
Give your Framework Laptop 12 motherboard a classic 90s makeover! This 3D printable enclosure transforms your Framework 12 mainboard and battery into a fully functional standalone desktop computer inspired by the iconic beige desktop PCs…
This is a carrying case for Framework Laptop expansion cards. It can hold two standard expansion cards, one larger Ethernet module, the original service tool, and extra pockets (not pictured) for e.g. screws. It is inspired by the…
Build Instructions To help organize parts for this project, feel free to check out my Framework parts tray For assembly, you will need the following: 14 - M3 heat inserts (short) 10 - M3 x 4mm screws 4 - M3 x 8mm screws 1 - M2 x 6mm Self…
Customize or simply replace your Framework logo. Removing the original logo is easy with some heat (heatgun, airdryer, ifixit style heat pouch, etc.) and a plastic (don't scratch the cover) prying tool. The original logo is some kind of…
I wanted a nice way to store the expansion bay shell of my Framework 16 as I use the GPU module most of the time. I noticed that there were no solutions available so I created my own. The model uses 8 5mm x 2mm magnets (3/16" x 1/16") to…
Adapter to mount a Framework 13" laptop's mainboard and battery in a generic PC mATX/ATX case. Requires 5x M2 screws of at least 5mm length. Use the washer STL if your screws don't have wide enough heads. See photo: No supports required,…
For the framework 16 laptop, the expansion bay is swappable. Either the empty bay for iGPU usage , or a dGPU. If you've got both and are traveling, you need a way to transport the uninstalled one while protecting it's internals. This is a…
Mouse dongle cover, designed for use with UGreen USB to USB C adapter .
Turns your extra Framework 13 display into a working portable monitor I tested on the matte display, it will probably work on the original, but I am not sure if the board works on the 2.5k. - Please let me know if you know that it works.…
This is a modification of the “ bottom_cover_l_cut.stl ” and “ bottom_cover_r_cut.stl ” models from the official version . Adds the ability to mount the official battery in a minimalist manner. You should visit the official version to…
Inspired by @BrianZak ( model ) & @y758xg4Awx_455549 ( model ) expansion cases but using a simpler design for just 2 small expansion cards and smaller magnets. The model was rebuilt completely in Fusion 360 to accommodate 4x2mm neodymium…
This SNACK (Sd cards, Notes, Appetizers, Cash, & Keepsakes) drawer is the perfect free option for those that want to either carry small items along inside their framework laptops or those that just want to fill an expansion port. The…
Storage box for my Framework 16 parts, stores 7 regular I/O cards, 1 Ethernet card, and an interposer, as well as two small input modules or one medium input module The magnets I used: https://a.co/d/gkEAkSu But any similarly sized…
This is a shell cover for the Framework 16 expansion bay module. Tested and works for the GPU + Fan module. Requires a print bed of 350 x 350 or larger No extra tools required Edit the spreadsheet in the FreeCAD file to change tolerances…
A conversion to turn the Framework 12 laptop mainboard into a FrameVault home server such as a NAS or Home Assistant system. Whether you have a spare mainboard from a Framework laptop upgrade or you just want to build your own home server…
Polydron Frameworks is an open-frame version of the marvellous Original Polydron educational toy, and the types are compatible. After succeeding in creating printable versions of the original , the next logical step was to tackle Polydron…
Framework 13 case based on Magmabow's remix which uses pins to connect the top and bottom cover. Combined the pieces into one for printers with a build plate of 300mm or larger.
to combat the nostalgia of my past as a little sailor I created this beautiful optimist to hang on the wall. the model is very simple and can be printed in a short time. if it is not balanced, add another nail inside the hull!
Customize your Framework Laptop Expansion Cards without losing their functionality. These models provide half of the Expansion Card that you can modify. These models do not add any functionality (except color - but please buy the colored…
This is a cooling pad to have your laptop on your lap and still get plenty of air. It's large, so you need to print it vertically, and at an angle. I'm not sure if it will fit on a Prusa MK3. Parts: 2 x 92x14mm Noctua case fans:…
check out my custom 3d printable framework bezel! here is the guide to put the thing together. You will need some nickel strip (the ones used in LiIon battery soldering) like this and some glue. Thats it. edit 07.03.2025: added fusion and…
This is 3D printable one piece solution to the three piece Framework 16 Touchpad and spacer solution. Fits on the Original Prusa XL. The best orientation to print this is with the flat side (where the palms would rest) on the bottom…
This was created as a way to use a single expansion port of a framework laptop to have a portable screwdriver using the framework screwdriver bit. It can use a 4mm x 2mm magnet to ensure the bit stays in place. The will use a bit of CA…
Takes 2 60x25mm PC Fans, Noctua sells 5v ones that can be plugged in with a simple USB to 3pin adapter cable. Fans: https://amzn.to/3ySHhk9 USB Adapter: https://amzn.to/4c6WZGs No special settings to print, should be fine with normal 0.2…
The Framework 16 is an awesome laptop, but you can clearly see that the creators are still new to the Laptop Design Business. For some inexplicable reason, the laptop has a very hard and sharp edge underneath the bottom that makes it very…
A simple, tiny box for an Ethernet expansion card and three (3!!) regular expansion cards in the smallest possible footprint. Printed in Overture PETG on a Creality Ender 3 v2, 240°C, 20% infill, 60mm/s, no supports. The hinge axis is a…
An air-inlet spacer for the Framework Laptop 13 (AMD Ryzen 7040) which fits on Prusa i3 mk3 print-beds. Based on Choumarin's bottom spacer for framework laptops . For a quick summary, see Differences of the remix compared to the original…
![[Compact] Framework Industrial Mainboard Case](https://media.printables.com/media/prints/6cd80c56-b03f-4332-a792-97700c120b5e/images/10655890_16338e5a-1fab-4623-8bf4-d74735e77fbb_ec5db624-2b2f-46c2-adff-4f47f07da8ff/compact-industrial-case.png)
