Search results: glo

Sort order

Counting matching models…

P
PrintablesRetroMaker

Snowglobe Votive Ornament - Winter Cabin

This large ornament or tabletop decoration (~5" diameter) uses a standard tealight LED candle (38mm diameter) to light it from within. If you have a tealight of a different size, I would scale the model to adjust to it's diameter. Print…

Downloads
38,778
Likes
6,691
Rating
4.9
P
Printablesmilspecmoehring

Extensions for Glock magazines

+3 Magazine Extensions for 9 x 19 Glock 17 OEM Magazines. Additional Hardware Required: M3 Threaded Inserts DIN 912 M3 x 6mm Hex Socket Head Screw or equivalent Soldering iron or long M3 Screw + heat source Sharp knife or Dremel…

Downloads
3,124
Likes
349
Rating
4.75
P
PrintablesDaniel Ryan

Large Earth Globe Lamp

This is a large 205mm diameter globe lamp that uses NASA imagery to create an accurate depiction of the continents and oceans. The oceans have some added artwork including a compass rose and pirate ship for some added flair. There are two…

Downloads
2,014
Likes
257
Rating
5
P
Printables3DbyShaw

Glow in the Dark Stars and Moon

A simple and quick print to decorate any surface in glow in the dark stars! Use the provided G Code for an under two hour print that gives you 21 stars of different sizes and two moons. Or use the 4 different size star stls to make as…

Downloads
1,975
Likes
328
Rating
4.97
P
Printablesevax design

Cookie Cutters Glove

It's a pastry cutter. It's very simple. Height is 4.9 cm, width 6.0 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…

Downloads
1,949
Likes
600
Rating
5
P
Printablesthomers

Magazine Base Plate for Glock G17/19/34...

The magazine base plates will fit original Glock 2-row magazines in “normal size” calibers: 9x19mm, .40 S&W, .357 SIG etc. e.g. for the Glock 17/34/21… I recommend to print them standing upright with a brim and set the slicer to finish…

Downloads
1,850
Likes
130
Rating
5

Glowing Christmas Tree - Tealigh latern - Christmas Decoration

Printed on my Creality Ender 3 S1 with following settings: Mode: Vase mode Layer height: 0,16 mm Material: White PLA

Downloads
1,540
Likes
298
Rating
4.88
P
PrintablesJoaelso

Küken im Osterglockennest - Easteregg

Osteranhänger für den Osterstrauß weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen Osterhasen unterm Baum Osterei…

Downloads
1,469
Likes
130
Rating
5
P
PrintablesRCHeliGuy

Racing Glove Holder

Holds Kart Racing gloves on a profile rig. Fits 40 series 120mm uprights on a profile rig. Uses a single M8x16 bolt to attach Has a rib that fit in the 40 series slot.

Downloads
1,140
Likes
152
Rating
4.8
P
PrintablesDaniel Ryan

Small RGB Litho Earth Globe Lamp

This model is a lithophane globe model of the Earth. It uses NASA imagery to accurately depict the continents and oceans. I have added some elements to the oceans to make them more interesting since they take up a large portion of the…

Downloads
1,127
Likes
114
Rating
1
P
PrintablesValhalalala

Gloomhaven Character Board (Remix)

Update May5 2022 Added the XP and HP pin (heart) stl files from DocKuro 's post just in case people cant find them. Also fixed errors in the Character Board stl and the gcode files. I use Duramic PLA+ Filaments and they print very well…

Downloads
1,100
Likes
161
Rating
5
P
PrintablesMilanko

Rotating globe lamp stand with BBs-based bearing for smooth rotation ability

Globe stand is compatible with all lamp globes by @FritzPeppone published here: https://www.printables.com/model/1087513-solar-system-lithophane-planet-lamp-collection Compatible with E27 bulb socket adapter like this one found at OBI:…

Downloads
961
Likes
471
Rating
5
P
PrintablesDraczyn

Gloomhaven Player Dashboard

I have been constantly getting lost when playing Gloomhaven so i decided to create a dashboard for players that would save some space on the table and help to organize your stuff. It lets you manage basicly everything you need during…

Downloads
830
Likes
154
Rating
5
P
PrintablesEnely

The tiny (spinning) World Globe

A tiny World Globe that can be assembled in parts or printed as one part. Also includes "just the globe". You can read about how the globe was created at: Enely's 3D - The World Globe Print each half and glue together to avoid support.…

Downloads
817
Likes
152
Rating
5
P
Printablesmilspecmoehring

Airsoft Glock Compensator for 14mm CCW

Airsoft Muzzle device for Glock Models with a Threaded Barrel. Attaches via M14x1 LH threads. This Print consists of two parts. A threaded insert which goes onto the threaded portion of the outer barrel and the comp itself which simply…

Downloads
758
Likes
113
Rating
0
P
PrintablesOrion3D Studios

Frosthaven/Gloomhaven/JotL Dashboard

The edges are beveled so it isn't harsh on your cards. It is designed to fit cards with or without card sleeves.

Downloads
756
Likes
90
Rating
5
P
PrintablesMichal Hlaváč

Tealight Snowglobe

Tealight Christmas globe Are you looking for a design Christmas decoration or ornament that is easy to print and yet will get everyone excited? Here you have it! Print this gorgeous M size ornament as a stand alone decoration or print the…

Downloads
744
Likes
243
Rating
5
P
Printablesbart

Diving glove drying stand

In the newest installment of “things that could've just been a stick and a piece of two-by-four”, here's my solution to drying out diving gloves. If you just lay them flat, they collapse and don't dry well. You could just hang them from a…

Downloads
438
Likes
85
Rating
5
P
Printablespatrickzell

Bicycle gloves hanger clamp / Fahrradhandschuhaufhänger

Simple clip with which e.g. cycling gloves or other light textiles can be easily hung up. I use it to store my cycling gloves, balaclavas, etc. with the rest of my cycling clothes and hang them up to dry. Einfache Klammer, mit der z.B.…

Downloads
392
Likes
74
Rating
4.8
P
PrintablesHedo3D

spotlights lampshade V2, GU10 or 12 V, led diffusor, glow in the dark, easyprint

You probably know all of these cheap lights that contain GU10 lamps. Most of these lights are kept very simple and can easily be converted to economical LED light sources. Compared to halogen spotlights, LED lamps not only have the…

Downloads
390
Likes
82
Rating
5
P
PrintablesBistromatic

Gloomhaven Dashboard

Here's my own spin on a character dashboard for Gloomhaven. My group uses app support to track health, conditions, etc. so they do not feature on the dashboard. This model was inspired by Hellfish's minimal dashboard but i started from…

Downloads
380
Likes
94
Rating
5
P
PrintablesRobC

Globe shade for ceiling lamp

The original glass globe broke and the Globe shade for floor lamp model by lehighluke was a close match. I reduced the size of the original model and added a flange to fit in the light socket. Printed in vase mode at 0.30mm layer height…

Downloads
373
Likes
58
Rating
5
P
PrintablesToolsToMars

Global 7500 Card kit desk model

I couldn't find a Bombardier Global card kit, so i made one. I have a Gulfstream G650 one in the works as well. Coming soon. This STL can be scaled smaller, you just may loose some of the thin lines around the cockpit windows. try using a…

Downloads
369
Likes
75
Rating
4
P
PrintablesObolski

Self glowing (luminescent) Exit-, First- and Medical-Aid Signs

A series of self-glowing exit and emergency signs i published on another platform a few years ago. 2 color print. Switch filament from green to self glowing for the final layers. The gcode files for Prusa i3 MK3S already have the color…

Downloads
366
Likes
119
Rating
5
P
Printablesrpgweb

Gloomhaven / Frosthaven stackable Monster deck holder

This is a monster attack deck holder for Gloomhaven and/or Frosthaven. Main features of the deck holder: The holders are stackable to take less space The fusion 360 model file is included, if you do a remix, please post your modified…

Downloads
351
Likes
35
Rating
4.5
P
PrintablesBistromatic

Gloomhaven Character Box

These boxes are sized to hold a full set of sleeved cards, with a stack height of up to 40 cards, the maximum size of a modifier deck that I'm aware of. My own set is Printed in Das Filament matte black at a layer height of 0.1mm, using a…

Downloads
314
Likes
86
Rating
5
P
PrintablesCapspam3D

Springloaded Middlefinger Fidget Toy

This is the perfect toy to fidget with when you are bored, it makes a satisfying sound when you use it. It is also great if you want to prank your friends, just put the finger down, lock it, and unlock it infront of them. It is great…

Downloads
284
Likes
36
Rating
5
P
PrintablesMitchelDZ

Gloomhaven standee

3fm file attached with: 100% infill to match the weight of the original (not required for the model strength) iron all top surfaces (can be turned off to save time)

Downloads
272
Likes
34
Rating
4.5
P
PrintablesVeracon

Vaultek Lifepod 2.0 Glock 17 Gen5 Insert

🔒 Introducing Custom 3D Printed Inserts for the Lifepod 2.0 for the Glock 17 Gen 5 Insert by Veracon Engineering! Elevate the security and organization of your firearm storage with our custom-designed Glock 17 Gen 5 Insert for the LifePod…

Downloads
260
Likes
57
Rating
5
P
PrintablesJérémy Reeder

Louvered Dryer for Boxing Glove

This is an insert for a boxing glove, designed to make it stay open wider when not in use so that the sweat inside it can dry up. I use it for my Krav Maga gloves. Its dimensions are identical to Isaac Howard's dryer, but mine is…

Downloads
259
Likes
43
Rating
5
P
Printablesila

Mitten, glove drying stand

Mitten or glove dryer for overnight drying. Keeps gloves fresh, airy so they dry better. Good after winter sports, cycling etc. I printed in PETG, pretty max maximum size my Mini+ can do, so that was limiting factor. Goes to many sized…

Downloads
212
Likes
69
Rating
5
P
PrintablesDan Rogers

5 inch - 12 cm - Fishing plug with glow stick and adjustable action heads

April 17, 2024 _ Update - added a second .3mf containing head models intended to print and use stick-on eyes. This is a model in multiple parts for a fishing plug. I used to make these and sell them and they were quite popular, but the…

Downloads
202
Likes
28
Rating
5
P
PrintablesJustin

Glove Remover RC1

This is a glove remover designed to allow you to take off your glove instead of touching it with your clean hand. Use these devices with your clean hand to allow you to not touch the dirty glove.

Downloads
179
Likes
28
Rating
4.5
P
PrintablesToolsToMars

GloboGym Purple Cobras

Costume accessory for Halloween. Multi color print. Black, White, and Purple.

Downloads
157
Likes
3
Rating
0

Vintage Globe Gasoline Sign 3 Colors

Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order Start with White, then Yellow, then Blue. Quick Guide to changing filament~ Have some paper…

Downloads
142
Likes
44
Rating
5
P
Printablescode3

Sy's Peglock - LTT Screwdriver

Adapted Eltord's LTT Screwdriver Hanger to work with Sy's Peglock. Requires "Board Attachment (Universal)" from “Sy's Peglock - Locking Pegboard System.”

Downloads
138
Likes
17
Rating
4.67
P
PrintablesMark Makies

GlowBit 8x8 LED Matrix Cellular Diffuser

I printed at 0.2mm. The bottom when printed, which becomes the top, is done with two layers at 45 degrees. I used generic white PLA, but anything that is slightly transparent should do. More of my builds at makies.au

Downloads
126
Likes
8
Rating
0
P
PrintablesExpance

Element and Round tracker for Gloomhaven, Frosthaven and Jaws of the Lion

Element and Round tracker for Gloomhaven, Frosthaven and Jaws of the Lion. Skull round marker was remixed from sceptic-skull Board and tokens have 1x10 mm magnets embedded in them

Downloads
113
Likes
24
Rating
5
P
Printablesrobosocks

Igloo 5 Gallon Drinking Water Cooler Cup Holder for Solo Cups with marker holder

Igloo 5 Gallon Drinking Water Cooler Cup Holder for Solo Cups with marker holder I wanted to use larger solo cups with my cooler when at outdoor events. I think the stock tube comes is smaller, for the paper disposables. With this…

Downloads
110
Likes
16
Rating
0
P
PrintablesMichal Stříž

PERFECT Gloomhaven/Frosthaven Standee Set with MAGNETS

This model is the first version. See improved version here: https://www.printables.com/model/421859-magnetic-frosthavengloomhaven-standees-second-edit Second edition features HP counter from both sides and other improvements - see the…

Downloads
103
Likes
12
Rating
5
P
Printableshaqnmaq

Glowforge 6" Vent Adapter

This is a Glowforge exhaust vent adapter for a 6" hose. I used it when attaching my AC Infinity S6 inline fan to my Glowforge. The printed piece should press fit nicely onto the Glowforge exhaust outlet, and there is also a recessed area…

Downloads
100
Likes
10
Rating
0
P
PrintablesFritzPeppone

Glowing Orb Lamp

Introduction This model is a simple spin-off of my Solar System Lithophane Lamp Series . Instead of a planetary lithophane, this lamp is a simple sphere with uniform thickness. Fusion 360 Files are provided and the license is chosen such…

Downloads
98
Likes
21
Rating
5
P
Printablesidgmo

Storage Bag / Glove Dispenser

This is a solid dispenser for standard sized storage bags. Gloves should work too! This can also be mounted on the wall. Enjoy! Note: The Gallon size will need to be printed on its sides and pieced together with a bit of scrap filament…

Downloads
90
Likes
13
Rating
0
P
Printablestonybruce

Gloomhaven Flying Monster Standee Riser

In my infinite desire to print ALL the things for my Gloomhaven campaign, I came across this amazing standee for monsters . I also found this riser for flying monsters , but I didn't like the separate component layout of the original…

Downloads
90
Likes
9
Rating
5
P
PrintablesKat

Glowing dinos

You need this filament to make the dinos https://www.dasfilament.de/filament-spulen/pla-1-75-mm/122/pla-filament-1-75-mm-glow-gruen-v2-800-g?c=11

Downloads
90
Likes
7
Rating
0
P
PrintablesAxioN

Gloomhaven Tokens

One-sided tokens to replace the double-sided tokens in game. Uses the Gloomhaven font (Pirata One Regular) and uppercase to make some characters easier to differentiate. These are designed to allow you to change filaments as you print to…

Downloads
85
Likes
14
Rating
0
P
PrintablesRyan Middleton

Axis and Allies 1940 global unit tray organizers

printed with Prusa mk3s+ 15% cubic infill no supports I don't know CAD so modifications were made in prusaslicer

Downloads
82
Likes
8
Rating
0
P
PrintablesCan ÇOLAK

Globber Baby Bike hook

Hook for Globber Baby Bike Important Note: You need to press the model horizontally. I have experienced that the state in which it appears in the photograph is unstable. ____ User update: Contrary to what it looks like in the photo, if…

Downloads
81
Likes
5
Rating
5
P

Nistkasten für Meisen, 28mm Einflugloch

Nistkasten für Meisen mit abnehmbaren Deckel, Belüftungslöcher im Boden, Befestigung mit Draht oder Band am Baum, einfach um die Nippel außen wickeln, um den Baum, Pfosten etc. legen und an der anderen Seite befestigen. Deckel wird…

Downloads
80
Likes
7
Rating
0
P
Printablestremmlinger

Airsoft: Simple magazine holder for glock style magazine with molle support

A simple magazine holder for glock magazines with Molle support. Can be used for a plate carrier or simply in the pocket if equipped with Molle. Printed with PETG... as seen in the model a reinforcement in the area of the Molle clips on…

Downloads
75
Likes
13
Rating
0
P
PrintablesDominik S 195

Teelichthalter für Snowglobe Votive Ornament

Ich wollte ein Teelicht mit 38mm Durchmesser in das Modell “Snowglobe Votive Ornament - Winter Cabin” (https://www.printables.com/model/325716-snowglobe-votive-ornament-winter-cabin) einsetzen und habe dafür diesen Halter gedruckt, der…

Downloads
74
Likes
5
Rating
4
P
Printablesgmmc

Gravity globe of the Earth

This is a high resolution physical model of the shape of the earth where the surface is distorted to show the strength of gravity at each location. The further out the surface is, the stronger the gravity at that location. I made this for…

Downloads
67
Likes
14
Rating
5
P
PrintablesSimone Rossetto

Home Assistant Glow box for esp-01s board

With this box you can install Home Assistant Glow on an esp-01s board powering everything directly from main power of your house. From original setup of the Glow I removed the status led because I don't need it, but it can be readded…

Downloads
62
Likes
7
Rating
0
P
PrintablesTimeOut@Home

Glove or Tissue Box Hanger

This two-piece mount is designed to be attached with magnets or screws. I created this box mount for larger glove boxes with end dimensions about 95x120mm. It also happens to perfectly fit a standard big Kleenex tissue box (in the USA at…

Downloads
59
Likes
12
Rating
0
P
PrintablesBeckTuning

Ridge Wallet Plate (Glock Theme)

After downloading several ridge plates and finding that the screws dont lineup or the finger hole is not the right shape I decided to take a crack at making my own. This one is Glock themed printed in PETG with the MMU3 make sure to put…

Downloads
58
Likes
21
Rating
0
P
Printableswarmist

Simple Gloomhaven Standee Base

A simple standee, similar to original included in the game. However, there is not enough yellow ones included in the base game. Especially if you play with 4 players. Holder is wedge shaped to better grip the standee. I recommend printing…

Downloads
54
Likes
2
Rating
0
P
PrintablesExpance

Condition Tokens for Gloomhaven, Frosthaven, Jaws of the Lion

separate into parts for easy mmu coloring 1x3mm magnets press in. use a little glue if magnets are a little loose. My container for these tokens can be found here . these work with my miniature base and HP dial system will be adding…

Downloads
51
Likes
4
Rating
5
P
PrintablesJoergH

Bluetti Halter Netzteil 500W T500 Ladeverstärker Charge Enhancer D050s - Werkzeugloser Aus/Einbau

Bluetti Halter für das 500W Netzteil T500 oder den Ladeverstärker Charge Enhancer D050s zum Solargenerator AC200(P/MAX), B230, B300, AC300, EP500 Das Netzteil kann ohne Schrauben zu lösen, entnommen bzw. eingeschoben werden. Am hinteren…

Downloads
48
Likes
4
Rating
0
P
Printablesslothmo

Flying Hex Stand - Gloomhaven/Frosthaven

A hex stand for flying units in Gloomhaven / Frosthaven. Made so they can fly above printed terrain pieces. You can stretch out the feet if you want a taller stand. There is a straight stand so the feet fix in a hex, and an angled stand…

Downloads
48
Likes
2
Rating
0
P
PrintablesValentin Turco

RENGLON DE LECTURA

renglon de lectura para ayudar a personas con TDAH

Downloads
45
Likes
1
Rating
0
P
PrintablesRemoteFox

Keyboard feet for Glorious GMMK TKL

They feet for the Glorious GMMK TKL keyboard broke, so I made a replacement. Measurements if you are interested: The FreeCAD model is partially parametrized. isize → inset size, width of the walls Rod Diameter → diameter of the rods…

Downloads
44
Likes
1
Rating
0
P
PrintablesDalicekMucq

Gloomhaven monster standee

A standee for Gloomhaven monster tokens. Designed for easy insertion without any risk of damage while still providing enough grip so that the tokens can be easily manipulated on the board. It should teoretically also work with any other…

Downloads
41
Likes
5
Rating
4
P
Printables3uDo

Dosierer für Globuli | doser for globules

Einsatz um die Globuli-Kugeln besser dosieren zu können. Use to better dose the globules.

Downloads
39
Likes
6
Rating
0
P
PrintablesExpance

Condition Token Box for Gloomhaven, Jaws of the Lion

Condition Token Box for Gloomhaven, Jaws of the Lion with magnetic Lid. Made for my Condition Tokens for Jaws of the Lion , but will work with any 15x15mm square tokens. Holds 7 of each with a slot for extras. (One of each token is also…

Downloads
37
Likes
8
Rating
5
P
PrintablesEmmEff

Ersatzrad für Radlaufglocke [Tire Bell] [Wheel Bell] [Bike Tire Bell]

The tire bell is operated with the remote trigger on your handle bar. The bell itself is mounted near the tire. When operated it will use the tire to contuesly sound the bell. Unfortunately, the bell wheel broke during a fall. Using the…

Downloads
35
Likes
0
Rating
0
P
PrintablesLirion

Gloomhaven - Monster standee for dice

This is my take on a standee for monsters in Gloomhaven. There are two models, one with slots for 2 dies and one for four dies. Both also have room for two condition tokens. The dice I'm using is 8,3mm. so the slots are adjusted to fit…

Downloads
33
Likes
3
Rating
0
P
PrintablesDarkBruce

Noctua motorcycle gloves dryer

When driving on the reace track, gloves get pretty damp and putting them back after a break is always a struggle. The goal of this contraption is to allow to have a good flow of air on your gloves, allowing them to dry before your next…

Downloads
31
Likes
15
Rating
5
P
PrintablesRyan Roehnelt

Spiral glove dryer

Another glove dryer, trying to make it more open and airy. The bottom is not the strongest - significant vibration from the plate movement on the Prusa Mk4 when printing the upper layers. This is more of a “can I do it” model than a…

Downloads
27
Likes
6
Rating
5
P
Printableszuberio

Pen Spring Kitchen Sink Gloves Clamp

A, 2 part, spring clamp for my kitchen sink gloves that uses a 4mm dia. by 25mm long pen spring for tension. Designed to work with 15mm of travel. This clamp is specifically designed for the dimensions of my kitchen sink counter, but I am…

Downloads
27
Likes
7
Rating
0
P
PrintablesRapideau 3D

Globe Earth

English : Not all the pieces are printed with the same material because I don't have certain colours in certain materials. Français : Toutes les pièces ne sont pas imprimées avec la même matière car je n'ai pas certaines couleurs dans…

Downloads
21
Likes
3
Rating
0
P
PrintablesHedo3D

spotlight diffusors, GU10 or 12 V, led diffusor, glow in the dark, easyprint

new diffusors for christmas https://www.printables.com/de/model/64058-spotlights-lampshade-v2-gu10-or-12-v-led-diffusor- You probably know all of these cheap lights that contain GU10 lamps. Most of these lights are kept very simple and…

Downloads
21
Likes
9
Rating
0
P
PrintablesDhubado

Small Glove Dryer with Desiccant Inside

CAUTION! Broken desiccant beads can fit through the slots. Be aware. Material: PLA Infill: 15% Layer settings: -Tube, set to 0.3 w/ variable layer height, adaptive only (see image) -Base, 0.3 Supports: -Tube and cap, only the locking tabs…

Downloads
21
Likes
4
Rating
0
P
PrintablesRusty

sl-insert-glock-40-9mm-v6_Modified_1mm_Shim

Imported the Glock insert to Fusion360 and made 1mm shims inside to take up slack on Glock19 mag.

Downloads
19
Likes
1
Rating
0
P
PrintablesDefozo

LumiClip: The Versatile Glow Attachment

🌟 Introducing LumiClip The ingenious glow-in-the-dark attachment 🌙 that brings a combination of safety, style, and versatility to everyday items. LumiClip shines brightly in the dark, ensuring you stay visible and your items are easy to…

Downloads
18
Likes
3
Rating
0
P
PrintablesToolsToMars

Global 5500/6500 Flaps Warning

The Global 5500/6500 Airplanes have no clearance between the Flaps and the Lav Service door when open. If the flaps are lowered while the Lav service door is open the flap and door will be damaged. This is why i made this warning that…

Downloads
16
Likes
8
Rating
0
P
Printables3DHippo

Glove drying stand

Just set them onto a radiator and put gloves on them. There are two different stands, one a bit bigger than the other. If you print one of each, you are able to stack them into each other, for better transport and storage. If you love…

Downloads
15
Likes
4
Rating
5
P
PrintablesFokieH

GLO Aufbewahrung

Stylisches Modell um den Heater Glo Hyper Pro, die Reinigungsbürste sowie 5 Schachteln der Sticks unterzubringen. So ist immer alles Greifbar. Gedruckt habe ich das Modell aus matt schwarzem PETG. A stylish case to hold the Glo Hyper Pro…

Downloads
13
Likes
3
Rating
0
P
PrintablesMichael Lynn

EDM drill workholding for Ceramic glowplug hotends

This is the 3D printed PLA 4 perimeters, 20% infill, workholder we used with the nomad carbide milling vice. as seen in this video by yours truly:

Downloads
13
Likes
2
Rating
0
P
PrintablesKikeMaker

Soporte modular para globos.

Soporte para globos “modular” que permite generar diferentes ángulos para exhibición y muy práctico para su almacenamiento. Pueden imprimirse uno o varios módulos y unirse entre ellos. Cada uno tiene capacidad de siete (7) globos. El…

Downloads
5
Likes
0
Rating
0
P
PrintablesZdeněk

360° Glow Disc UV Charger Puck for Disc Golf

Description This battery-powered UV light keeps your glow-in-the-dark disc golf discs bright and ready for night play. Shaped and sized like a hockey puck, it fits neatly into your disc golf bag. When powered on, 18 UV LEDs around the…

Downloads
3
Likes
1
Rating
0
Downloads
1
Likes
3
Rating
0
P
PrintablesEndK7

Glorious Baby Dragon - Articulated - Print in Place - No Supports - Flexible - Fantasy

I'm really glad to present you the Glorious Baby Dragon For these Models I've used High Gloss PLA ColorMorph Filament made by Formfutura . That was the first time I used this Filament and the results are marvelous, I love it! Use the Code…

Downloads
19,968
Likes
2,698
Rating
4.97
P
PrintablesHank

Snowman Tea-Light Ornament – 3D Printed Holiday Glow

Copyright Notice ⚠ WARNING This design is an original work by the creator and is protected under the Creative Commons 4.0 International License. Unauthorized reposting, claiming authorship, or distributing this model or its images—whether…

Downloads
19,729
Likes
3,115
Rating
4.97
P
PrintablesEndK7

Glorious Baby Dragon - Extra Long version

I'm very excited to introduce you to the new and extra long Glorious Baby Dragon! Longer Dragon = more Fun! It has so many articulated parts, so amazing! Length: 93cm / 36,6Inch Luckily, I arranged the parts to use as little printing area…

Downloads
12,352
Likes
1,522
Rating
4.96
P
PrintablesSatellietje

Glowing WLED or LED all alphabet letters and all numbers 8.5 cm high

👍 Do me a big favor and hit the Like button! ✨ 🛒 Shopping List WS2812B RGB LEDs (AliExpress) Wemos D1 Mini V3.0.0 (AliExpress) Thin wire 30AWG (AliExpress) Black filament – Sunlu Black Warm white filament – eSUN White‑B Solder tin Cable…

Downloads
9,113
Likes
1,776
Rating
5
P
PrintablesKrazy_Kid59
18+

The source marked this model as adult content.

Downloads
7,421
Likes
574
Rating
5
P
PrintablesDaniel Wenger

World Globe

The contour data for the largest 60 land masses and 6 of the largest lakes were plotted on two spheres, 100mm and 102mm radius.. Arcs were made between contour points to generate closed paths. Lofts were then made between the two spheres.…

Downloads
7,043
Likes
408
Rating
4.9
P
PrintablesAurele_05
18+

The source marked this model as adult content.

Downloads
6,382
Likes
1,684
Rating
4.61
P
PrintablesStellasFun

Sy's Peglock - Locking Pegboard System

This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board Attachment” parts are universal to all models. Print with 3 perimeters and…

Downloads
6,275
Likes
1,106
Rating
4.9
P
PrintablesRetroMaker

Snowglobe Votive Ornament - Xmas Town

This classic holiday 3D model can be used as a large ornament for your Christmas tree or as a tabletop decoration. The charming glowing Christmas tree in the town square is surrounded by shops. This updated design prints better and has an…

Downloads
5,294
Likes
1,038
Rating
4.92
P
PrintablesPeter Davis

Another Nitrile Glove Box Dispenser

While this is nothing new, I designed this to have the glove sizes indicated on the holder. For my purposes I am printing each one from a different color PLA. I was looking for one that was a direct wall mounted option, one-piece…

Downloads
5,281
Likes
1,851
Rating
4.92
P
PrintablesSconnie Makes

Customizable Snow Globe

Looking for the ornament version? Check that out here! Create your own snow globe by picking which panes to print and slotting them into the base! The base can support up to 3 panes, and there are 9 options (+1 blank pane) to choose from.…

Downloads
5,220
Likes
2,209
Rating
4.91
P
PrintablesSatellietje

Glowing LED all alphabet letters and all numbers 6 cm high

*** You are doing me a big favor by clicking the Like button :-) *** ** Let me see what you have made. Upload a photo in Add make ** Print the letter in black or other non-translucent color. Cover plates "adfekkapje.stl" and diffuser warm…

Downloads
5,047
Likes
754
Rating
4.9
P
PrintablesSebastian

"Snow" Globe Christmas Lithophane

This is a remix from Taylor Herrin . For more info how it is created see at the original model. The sculpture were so nice but I wasn't able to print it due to net errors. So I repaired it with Blender. In addition for faster processing…

Downloads
4,963
Likes
1,036
Rating
4.82
P
PrintablesSamK3D

9mm Dummy Training Magazines (fits Glock)

Dummy magazines for safely practicing dry-drills etc. They lock in normally on the mag catch and don't activate the slide release/hold-open. G17, G19 and extended versions. Should fit all generations. 05.08.2025 Update: Taken down due to…

Downloads
4,595
Likes
343
Rating
4.94
P
PrintablesTaylor Herrin

"Snow" Globe Christmas Lithophane

"Snow" Globe Christmas Lithophane - A Christmas themed lithophane globe of a winter landscape. The STL file was created using Lithophane Maker Desktop , and the part was printed with American Filament Classic Lithophane White PLA . When…

Downloads
4,177
Likes
641
Rating
4.9

Glow-in-the-dark dog paw shape

Nothing special. Just a dog paw shape that has been extruded in blender for the purpose of use with glow-in-the-dark filament.

Downloads
4,124
Likes
48
Rating
5
P
PrintablesRobagon3D

Tree for Gloomhaven

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. It means a lot, and us designers really appreciate it. Overlay tile replacement for the board…

Downloads
4,004
Likes
618
Rating
4.94
P
Printablesfns720

Glove clip

Hang any soft stuff to anywhere using these clips! Printing I have exported two sizes but the design is parametric so you can make your own version ( d_clip is the only parameter you have to adjust) to achieve maximum stiffness print the…

Downloads
3,917
Likes
472
Rating
4.83
P
PrintablesQuadView

The Perfection of Magazine Holders Rack for the Wall or Safe Designed for Glock 17 19 43x

READ INSTRUCTIONS: I see a lot of the prints and you guys area printing it in the wrong orientation. It's much stronger if you print it with the Holder orientated how it would be when you use it. UPDATE: Added Glock 43x Needed a place to…

Downloads
3,855
Likes
599
Rating
5