360 models
MODEL DETAILS This is a print-in-place, torture test for your 3D Printer, that works as a fidget toy. If you liked this model, why not try out our other stress tests too? You can find out all about Revo Hemera XS here! RECOMMENDED PRINT…
Using these prints you can replace the stock extruder on the mini+ with an E3D Hemera Bowden kit . Replace the stock MINI-z-carriage-rear part with the MINI-z-carriage-rear version provided here. See [the MINI kit assembly…
Video guide: Text guide: https://e3d-online.dozuki.com/Guide/Convert+your+stock+Anet+A8+to+the+Hemera+toolhead/131#s1512 Get the ready-to-go firmware here: https://toms3d.org/wp-content/uploads/2019/11/Marlin2-source-A8-20191129.7z…
BOM (Book Of Materials): 2x M3 nuts (for the fan) 3x M3x25mm screw 1x M3x6mm screw 3x M3 Washers (for the M3x25 screws - optional) 1x 5015 Blower fan Instructions manual : https://www.thingiverse.com/download:7569024 If you dont know what…
Revo Hemera XS is 92g lighter and 11mm shorter than classic Hemera. A custom stepper motor means it can move faster on your 3D printer’s motion system with less inertia than classic Hemera, reducing print artefacts such as ghosting. Its…
This is not my design, this is a copy of https://www.thingiverse.com/thing:4091776 that I wanted to migrate to Printables, and I've also designed and included a Hemera XS mount to go along with it. Use a piece of filament to secure the…
Compact mount plate for mounting the Hemera Extruder to an Ender-3 carriage. I initially mounted my Hemera Extruder using Joe Cashas mount plate , but found it a bit to wobbly because the motor part was placed to the right of the Ender…
A HemeraXS Revo Cooler design. WINSINN 4010 blower fan is used. You need a 1mm plate of steel in between the Hemera motor and the fan as the motor magnets effect the fan. I just double sided sticky taped mine to the fan. Own design but…
Circular Part Cooling Shroud for Hemera. I wasn't happy with the cooling shrouds that were out there and was needing proper cooling on all sides of the a part that I am designing so I needed something that could handle that. Note I used…
I have added extensions to support the 5015 fan and to hold the duct with two screws. M3 inserts are used to secure the fan onto the duct.
I'd claim that this is the best and easiest Hemera Upgrade for your i3 MK3s out there if you're willing to leave the filament sensor away. Instructions Print the parts. (The bracket is meant to be printed with the flat side facing down)…
I made a new fan shroud for the E3D Hemera, which i use in my ToolChanger. I printed it with the Prusa SL1, but FFF will also work. Update V5.1: Added additional 0.5mm to the mounting points. Feel free to remix and improve it.
This is a mount for the E3D Hemera using an MGN12 linear rail on the Ender 3. I designed this with the belt attachment separately for ease of printing. Print instructions I recommend PETG or better with 3 perimeters and 30+ infill.
Combined and designed this setup from the best ideas and designs I could find (in my humble opinion of course) Features: Single piece backplate. No loss in build volume. Nozzle in original position. Cable routing thru backplate for nice…
Modified duct to use a 5015 blower fan instead of a 4010. I made two versions, one with 3mm holes to direct thread M4 and another with 4.9mm holes for M4 heat set inserts. Print with flat part of duct on bed, no supports needed.…
This is new a mount to attach an E3D Hemera extruder to a Prusa MK3S printer. The original interior geometry from the Prusa filament sensor has been incorporated into this design, sourced from Prusa's models. The mount is rotated 30…
This is a remix of the fan mount from Baphomet. It is meant for a 5015 radial blower fan. I have included 2 different mounts, depending on the type of sensor you have. I used a 12mm (diameter) inductive probe but found it was inconsistent…
MODEL DETAILS These are the printable parts for the Revo Hemera XS Tool for E3D's Toolchanger platform. A mirrored version is provided but be aware, you will lose some build volume in the Y direction (around 10mm) if you choose to use…
Mod to use the incredible Hemera Revo extrusion system on Elegoo Neptune 3 Pro/Plus/Max. using the probe heat inserts M3 for strong joints for all parts wire/cable cover, remember you need to adapt Revo components to Elegoo pcb
Hemera/Hermes adapter plate for the Anycubic Chiron. This adapter plate allows you to mount the Hemera unit without modifications to the baseplate of the Anycubic Chiron. You can also still use the included bed leveling probe, but I have…
I loved this shroud Hemera 5015 Fan Shroud - Simple by permanoob - Thingiverse . I remixed it to fit my new XS hemera motor.
E3D Hemera is a dual-drive extrusion system complete with a fully hardened stainless steel drive train and optimised heatsink design. E3D Hemera offers extraordinary filament control and allows the end user to take flexible printing to…
This is a mount for the Hemera on an Artillery X1 (probably compatible with the Artillery Genius). HEMERA SCREWS: 2 - M3X8, 4 - M3 X12 + (4-8 WASHER M3, They will be to separate the screws that support the Hemera motor and prevent them…
This is my solution for a simple but yet lean Hemera adapter for my Sidewinder X1. The idea was to have one simple part for the whole Hemera extruder that: is one part that can be mounted / removed easily without loosening the screws…
This Hemera mount is compatible with the Prusa MK3s X-Carriage. A lot of mods require a "downgrade" to MK3. You will need to reverse two of the screws that connect the X-carriage and the Hemera mount. Use the modded fan shroud and PINDA…
Another mount to attach the BLTouch to the side of the Hemera. Offset to tip is X-33mm Y-0mm. No supports needed and should be printed in something with a higher heat tolerance like ABS. The top mount hole has a piece that can be broken…
Anycubic i3 Mega S mods This is a collection of mods of the Anycubic Mega S 3D printer. Feel free to experiment with them! Files are on GitHub! This collection contains 3D models and configuration files made by different people (all…
A modified duct for Hemera XS win 4010 fan. See photo for print setting and orientation.
Remix of Permanoobs Hemera 5015 Fan Shroud. Features: Usage of a BLTouch / 3DTouch / TLTouch Autobedleveling Sensor No Restriction for warm exhaust air of the Hemera-Fan You can use 40x40x10 as well as 40x40x20 fans to cool the Hemera (I…
The original https://www.prusaprinters.org/prints/35611-prusa-i3-mk3s-hemera-upgrade-30 is great. But I found few uncomfortable issues so I fixed it! Improvements: PINDA mount. Extruder mounting system is horizontal instead of vertical.…
Ender 3 compact mount for E3D Hemera The aio mount version(recommend) will keep the x offset of nozzle unchange and maximum the X build size is 235mm. This version only use 3 m3x7mm button head bolts to mount the Hemera to the plate. You…
This is a modified duct from a file i had from when the first Hemera came out….I added some height and length to fit the Revo. I use ac glue to bond it to my fan, it comes off without wrecking part if you want to change it..at least it…
For some reason I couldn't find a fan duct to work with the orginal hemera (everything is for the XS) with the revo upgrade so I made one. I'm far from a designer, I know enough to be dangerous. This works fairly well. Fairly silent and…
This is really just an extra arm to mount a BLTouch sensor added to Drax's excellent Hemera XS 5015 Fan duct, with minor modifications to adjust the duct outlets to match the older Hemera (the XS is shorter). I also added a small slot for…
New Version Avalible https://www.printables.com/model/976980-hemera-cooling-duct The new version takes lessons learned from this model and incorperates a better duct design and saves space while supporting BL-TOUCH and CR-TOUCH probes.…
This version has been tweaked so the belt insertion slots are 0.2mm tighter to hold GT2 timing belts.
I had a hard time finding a fan duct and BLTouch mount for my Hemera Volcano, so I created this generic mounting bracket and adjustable mounts for the fan duct, 5015 radial fan and BLTouch. I extended the fan shroud prongs a bit to get…
Simple ADXL345 mount that I designed for an e3d Hemera, for the purpose of running input shaper to remove resonance (ghosting) artifacts. Open SCAD file is included if you need to make adjustments (please remix if you do). Materials…
I wanted to be able to print all parts in the best orientation possible, so I made this. My current setup is the E3D Revo Hemera (original and XS), TH3D ezABL (mini and regular), and a lot of OCD. If you use the ezABL mini then the…
1/11/23: Fixed BLTouch mount offset on BLT bracket, it was too high. I designed these brackets to mount the E3D Revo Hemera XS to my Ender 3 V2. This will fit other Creality machines that use the same hot end carriage as the Ender 3 V2.…
Modified my original one piece design to reduce printing time. Full size Hemera and Volcano variants available and I will upload these soon.
I remixed the Revo Hemera XS 4010 fan duct to fit a 4020 blower fan. I've printed it as a test fit and so far it looks pretty good. It's certainly not the best design out there, but it works better than a 4010 fan.
Update 22.01.2020 V2.0: Here is the new version with 3-side outlets https://www.prusaprinters.org/prints/19405-universal-e3d-hemera-part-cooling-duct-v20-for-501 Update 11.12.2019(V1.1.1): : I modified (-5.0mm) the width of the exhaust to…
2 different versions of the mount, unmirrored and mirrored. To save as much space as possible I moved the filament lever underneath the receiver, though it doesn't look like it, the filament lever is still quite easily accessible and if…
This is E3D hemera or matrix/matrix-lite from trianglelab mounting bracket for prusa I3 MK3S This is remixed from https://www.thingiverse.com/thing:4510337 Wedge-shaped fixing surface for better stability and more secure to hold the…
Shorten the distance by 11mm between stepper motor mounting holes for Hemera XS
This model includes everything you need to mount a Hemera Revo XS to a Sidewinder X1. It includes a custom-made fan shroud/duct that will work with the rest of the mounting hardware. The model is made so that the nozzle tip is in nearly…
Anycubic Chiron Matrix/E3D Hemera (original) extruder adapter
This mod combined with the dedicated Firmware mods allow you to fit an Hemera extruder from E3D on an MK3s using MMUv2 upgrade. The mount is rotated 30 degrees to allow the full x-axis carriage travel without the need to move the lead…
Use M3 heat inserts Ready to use chains Bltouch support offsets X -21 Y -40 5015 blower fan some supports for zip ties
This is a modification I came up with for my CoreBot V2 printer to convert the linear motion system from Rollers to MGN12H linear rails. I also added a (somewhat) quick-change system for the tool head as well as support for the E3D Hemera…
Some mods to the official E3D Hemera model to make it more printable. UPDATE: Added versions with space for 3mm heatserts. 4mm OD or 5mm OD style. Tverse is fsck'd right now, so having trouble uploading....someday. Sometimes it's easier…
Hello people, in this project I have installed the E3D Hemera Hotend on a Creality CR-20 Pro / Ender 3. In addition, the x-axis was upgraded with a Linear Rail System. Furthermore the BLTouch of the system was moved accordingly. As a…
This is a Hemera upgrade set of parts for an ender 3 X carriage with a cable chain mount. It is designed around my Anycubic Chiron where the X Carriage was not made correctly and therefore could not be tightened onto the extrusion. This…
Nuevo soporte para ducto y ventilador del extrusor Hemera de E3D. Primero se sujeta la pieza al cuerpo del hemera con 3 tornillos M3x5, el ventilador con 2 M3x20 y por último el ducto se introduce a presión en el ventilador 5015 y se…
VORON 2.4 R2 with a Hemera XS extruder The printing size is reduced of 5 mm on X axis with the bed moved a little on the left. No change on Y axis. The chain holder also allow to fix an accelerometer. For the screw lenghts please check…
Update (V2.2) I tested a bit around different smaller design changes and validated them ROUGHLY with CFD (I am not an Engineer or somebody who knows CFD very well). Picture of the rough CFD Simulation attached. I made small changes like…
This is a universal E3D Compatible Hemera and Hemara XS mount design for the Creality printers also included an Extraction duct. Designed to mount the Hemera and XS version to the existing Creality plate fixing are in the link below.…
This was designed to mount an e3d Hemera on my Vyper. I use ABS for all parts and Klipper for firmware adjustments. The holes for the Hemera screws are not completely end-to-end and have to be drilled through (3.0 - 3.5 mm). The extruder…
In my opinion, the best mount for adding linear rails and a Hemera to your 3D printer. I used this on a an Ender 3, but any printer with 2020 extrusion should work. Most mounts offset the Hemera from the linear rail block. But using flush…
Remix of Jacob's mounting plate to accommodate a 4020 fan. I rotated the BL Touch 90 degrees. Will need to use their belt mount. Update: added compatibility for XS Hemera. This was based off the E3D provided CAD model. Note - will need to…
EDIT 2023/8/5: Forgot to add my wire tie beam it keeps the cables up from the plate. EDIT 2023/4/7: Finally made my own clone of the effector from scratch out of FreeCAD. No Spacers required now. Much cleaner and got back 10mm of height…
Mount that attaches BL Touch directly to the Hemera. Offsets: x_offset: -23 y_offset: -37 z_offset = 1.810, but YMMV
I created this model for the following reasons: Most mounts available are not made for use with Volcano. This design has the BL touch mount height appropriate for the additional length of the Volcano. The mounts that use the roller bolts…
Please refer to our Toolchanger Github for more information.
This is my design for a fan duct for the HEMERA with REVO Nozzle system. The coordinates for the BLTouch are: X=0.38mm; Y=-42mm You need support for the BLTouch version. Screws needed: For mounting the plate : 3x M3x8mm; For mounting the…
The original Drax design is truly satisfactory, but it has a number of issues that have been detected through continuous use of the heatsink. The first problem I encountered is that due to the weight of the Hemera and any configuration…
This is a set of mounts I designed for mounting the E3D Hemera to my HyperCube build. The blower fan and probe mounts should be compatible with any other printer if you'd like to mix it with another carriage design. Included parts: 12mm…
YAHME3 -Yet Another Hemera Mount for Ender 3pro But its based on the existing metal x carriage mount so you do not have to dissasemble the whole printer Uses stock backplate leaving access to all attaching screws bl touch mount endoscope…
This is a plate for ender 3 with bltouch for hemera xs the plate was remixed from: https://www.printables.com/prints/21817-ender-3-compact-hemera-mount-plate-with-bltouch the fan duct was remixed from:…
* This is the Volcano version of my Hemera Part Cooler * I made this after several requests after publishing my standard Hemera Part Cooler. I don't have a Volcano so if you do make and test this cooler please leave me some feedback My…
Due to all existing mounting solutions for Hemera to Ender 3 having compromises I don’t want, I decided to design my own. My aim: As little build volume loss as possible All 4 mounting tabs used Hemera mounted to metal Cr Touch and Bl…
I saw several designs for the Hemera XS that fitted the ender 3 (and other creatility printers) but they always have the same problem: you lose X gantry, or if you didn't they didn't accommodate for a Noctua 4020 Fan. Features Works in an…
Mounting instructions can be found in the PDF in the file section: <------ If you like this mount please use the "TIP DESIGNER" button and leave a tip for a hot or cold beverage. you can also use the link:…
After upgrading to the Hemera on my Ender 3, I noticed that the head was wobbly, and noticed ghosting in the print as a result. So I found a 4 wheel mount to replace the default 3 wheels, and set to work adjusting to fit it. This will…
Update 15.05.2022: Provided upgraded version of the Plate (1.1). better alignment of the belts holes added additional mounting holes for different (shorter) Tronxy leveling sensors slightly better alignment of the FS above the Hemera…
Purpose E3D launched an improved Hemera a few months back, with different motor mounting points. Thus the BearMera was not compatible with the Hemera XS. I wanted to put the E3D Hemera XS Revo on my Prusa, so I modified the original…
To my surprice I could still not find a cool PTFE to Palette2 connector. So I did. It's quite simple: you need a pneumatic connector, whose M6 thread is screwed onto the Pallete2 piece. And the rubber 'washer' given by mosaic. I cutted…
A New Version Is Avalible Check my printables page for the latest version print with high temperature plastic to prevent damage, anything with a glass transition temperature of 80°C or higher. lower clearance allows for more efficient…
Really like the design. Unfortunately it doesn't fit my nozzle hight, need to lower the fan duct some mm. Redesigned it to make it adjustable for 10 mm.
I remixed the fan duct provided by E3D on their GitHub repository for a volcano-equipped Hemera to fit a Duet Tool Board. Can be used as-is without a tool board as well. STL and STP included More Info: E3D's Github for the original file:…
07.10.21 uploaded V2 of the ebm-past duct and updated .step file 5015 ebm-papst 2 options, V6 and volcano. 5015 2 options, V6 and Volcano. .step file included Not tested on a Hemera-volcano yet but should have enough adjustment. Happy to…
E3d Hemera Revo Bltouch/ADXL345 mount, designed for the Zerog Mercury1/Eva 2.4 Carriage Ender 5 core xy conversion. but will work with any Hemera revo as long as the front 4 square nuts arent in use. Probe offsets x_offset: -30 y_offset:…
Really loved the design and the rigidity of the mount from Psych101, but ran into the issue of awkward cable management with my BLTouch and Hemera fan. Therefore I cut out a channel to guide those wires securely behind the hemera to the…
I loved the Cooling fan the original modeller created, but after I printed in PETG and attached, I noticed that after a 2 hour print, the small thin wall warped and started to scrap the printed part. I ended up doing the following…
Allows mounting of BLTouch to the front left of the extruder via the fan when using a more compact back plate for the ender3 along with a wrap around duct for the part cooling fan. (Mounting on the back of the motor is too far right and…
OUTDATED: This model was kinda bad so I made a new one which seems to be much better and easier to install. You can find it under my profile or here Hello! I wanted to buy and mount a Hemera Revo XS on my sidewinder X1. I found that there…
This is a remix of the model by Chip with the following changes: Redesigned mounting points Redesigned BLTouch holder for better cooling performance Increased rigidity STEP file included so you can adjust the height of the mounting points…
Hemera Adapter Plate for Ender3 Pro and likely the CR10 Pro. Inspired by: 3DMNs - Ender 3 E3D Hemera Mount https://www.myminifactory.com/object/3d-print-ender-3-e3d-hemera-mount-105802 3DMNs - CR10s Mount…
Print in abs, asa or any material that can withstand the heat, 40% infil, 4 outside walls, 5 bottoom and top layers, layer high at .16 mm. Assembly requires 4 m3x8, 2 m3x10 and 2 m3x50. Step file its included in case you need to do…
This is a remix of several parts to mount a Hemera on a Voron Switchwire. I have abandonded this project and preset it as is. There will be no further changes. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament:…
Español: Actualización 5/30/2020: Añadí varias fotos de como colocar los cables en el ensamblado. También actualice el ducto del ventilador para mejor flujo de aire a la impresión. Actualización 4/30/2020: •Actualice la pieza…
I edited the original part to remove the bottom surface fillet so that the part can print without supports
This is a fan duct supporting a 5015 fan and BLTouch for the E3D Hemera and Revo. It's installed on a ShadowMega RadZ_K (a heavily modified M3D Promega running Klipper). I've also included a mount for the ADXL345 accelerometer that goes…
Make sure you have good bridging settings, no support needed. This uses a 5015 fan and M3 hardware. Here are the Fusion360 CAD files, https://a360.co/3AAP0yA
Easy to print and the fan duct fit Revo
YAHME3 -Left Flipped Hemera Mount for Ender 3pro The hemera on this is reversed - i forget why - But its based on the existing metal x carriage mount so you do not have to dissasemble the whole printer Uses stock backplate leaving access…
Description: Filament sensor for “address change” Hemera upgrade for Prusa mk3s . This mod reuses the original parts from the Prusa mk3s filament sensor. Part list, Instructions/assembly guide can be found in the link below:…
Update v2: Check v2 folder for latest designs. Instructions: asap This is a remix of many cool designs. Hemera mount plate remixed from ryedesign one. Added guides and holes for M3 nuts for securing additional stuff on top of this plate.…
An effector and fan shroud mount for the E3D Hemera for delta printers. This direct drive effector works quite well with well designed delta printers like the Ultibots D300VS or the various SeeMeCNC printers that use the SeeMeCNC machined…
![[v2 update draft] Ender 3 Hemera mount / fan / touch](https://media.printables.com/media/prints/186416/images/2077795_1c5f8550-92f2-49e1-bdb5-6e20293838be/assm-1.png)
