Search results: housing

Sort order

3,375 models

P
PrintablesDL2MAN

uSDX Sandwich Housing (Lunchbox) by DL2MAN

This is the housing for DL2MAN uSDX Sandwich , so users that already have an existing Sandwich can print an easy housing. It requires to remove the electrolytic capacitor below OLED, replace it with a small tantalum capacitor and solder…

Downloads
408
Likes
15
Rating
5
P
PrintablesPiJey

Takamine TK4NT Acoustic Guitar Preamp Replacement Housing

Motivation The frame of the housing of a Takamine TK4NT acoustic guitar preamp broke, so that the preamp was no longer fixed in the guitar. I designed a replacement housing. Printing I printed the design on a i3 MK3 using PETG, layer…

Downloads
380
Likes
10
Rating
5
P
Printableszuern

XT60 and XT60H blank housing

PET is flexible enough to insert the XT60H plug. Not yet tested with PLA (less flexible).

Downloads
341
Likes
29
Rating
0
P
Printablesmarcin212

Seed Studio XIAO ESP32S3 Sense Housing

This 3D enclosure is designed to securely house the Seed Studio XIAO ESP32S3 Sense, providing both protection and easy access to key components. The compact case ensures a snug fit while leaving essential ports and sensors exposed for…

Downloads
280
Likes
18
Rating
0
P
Printablesreiji

Prusa MINI Enclosure - External Display Housing

This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side. Required hardware: -3x M3x8 screws -1x M3 nut -Reuse the 4x M3 screws from…

Downloads
232
Likes
109
Rating
5
P
Printablessenatorpjt

Creality Ender filament runout sensor improved housing

I purchased the Creality-branded filament sensor for the Ender 3V2. It has several problems: It grinds up the filament at the inlet. The filament has to travel a way to the extruder, and is very difficult to get in. The filament usually…

Downloads
144
Likes
17
Rating
5
P
PrintablesHD_Creator

RaspberryPi 4 ultra performance housing

This strongly cooled housing is made for a multimedia center application and allows the RaspberryPi 4 to stay cool even at extensive load, like when playing 4k video. It is made to hold the RaspberryPi 4 itself, a 5V DC-DC buck converter…

Downloads
110
Likes
27
Rating
5
P
Printablesczrtst

Pool Water Filter Housing Wrench

Pool / Water filter wrench Print with 4 or more perimeter and about 20% infill. Innerdiameter 95,5mm Outerdiameter 99,4mm Step files included

Downloads
98
Likes
17
Rating
5
P
Printablesbassklampfe

Wall mountable housing for BME-280/SHT21 and similar sensors

This is a variation of https://www.printables.com/model/1202146-wall-mountable-housing-for-dht-22-sensor for smaller sensors without own housing. See attached pictures for assembling. Please remember to insert the cable into the housing…

Downloads
80
Likes
9
Rating
0
P
PrintablesTyger1

Gaggiuino - Nextion24 Front Mount Housing

This is an alternative housing and placement of the Nextion24 LCD screen used for Nextion based Gaggiuino. The housing has an an opening for the SD card slot at the bottom and attaches to the cup warmer plate by magnet. The two small…

Downloads
77
Likes
9
Rating
0
P
PrintablesTerje

Log housing for 35mm film canister intended for geocaching

Log housing for use with geocaching. See attached “Log housing for 35mm film canister how-to.pdf” for details.

Downloads
56
Likes
10
Rating
0
P
PrintablesPrint2Solve

ZHITING Sensor Hygrometer Thermometer Wall Mount - Minimalist Snap-Fit Housing

🇬🇧 Small round housing for a hygro-/thermometer sensor for the installation of a Chinese electroni- modul. mounting hole on the back large cutout for easily accessible control button without removing the module many ventilation openings…

Downloads
46
Likes
13
Rating
5
P
PrintablesAlex_P

Housing for electronics with ventilation grid / Elektronikgehäuse mit Lüftungsgitter 60 x 100

The grid is made in Prusa Slicer (no bottom and top layers) and can be omitted. The top part has a good fit to the bottom part due to a small rim. I printed in PETG. Only screws needed (4 x M3, 8x M4).

Downloads
40
Likes
1
Rating
0
P
Printablesbydand

IMOU IPCAM housing

Embedded/ Integrated Housing for IMOU IP Camera into ceiling. COQUE encastrée pour camera IP, marque IMOU (AMAZON)

Downloads
40
Likes
12
Rating
0
P
PrintablesTonyPTX

ESP32 Max v1.0 Garage Door Housing w/Relay

This is a basic box to mount an ESP32 Max v1.0 Development board (Arduino UNO Clone) with a single channel 5V relay and a BMP280 temperature sensor (should work w/BME280 as well) to interface with a garage door opener utilizing a…

Downloads
31
Likes
6
Rating
4
P
Printablescombobulator

Desk Housing for Anker MagGo Wireless Charging Station (3-in-1, Foldable Pad)

About Anker's MagGo Wireless Foldable Charging Station is a pretty cool product for traveling but I found it unpleasant and flimsy to use at home, so I made this housing that sticks to your desk using double sided tape, making the charger…

Downloads
28
Likes
5
Rating
0
P
PrintablesBlueThunder05

Paradise GL22627BK Light Housing

The injection molded plastic housing that comes with the Paradise GL22627BK Landscape Pathway Light typically cracks/falls apart after 1-2 years. I modeled a replacement with the main difference from the original is I used external fuzzy…

Downloads
25
Likes
3
Rating
0
P
PrintablesPilote NEXUS

Tarmo 4 Output bell housing upgrade

I designed this new version of the Output bell housing in the differential of Tarmo 4 RC car. I simply noticed that it would be better to use a M2 screw for the power transmission instead of a steel wire. So you can transmite more power…

Downloads
25
Likes
7
Rating
0
P
PrintablesHendl

EVE Shutter Switch (1.0) Housing

Eve Shutter Switch External Housing for Wallmount We had a very old electric control for our window shutters, which was not mounted inside the wall but had a small housing. I wanted to integrate the shutters to our smarthome (we use the…

Downloads
21
Likes
2
Rating
0
P
PrintablesPlainsPrepper

Key Ring Housing for 2008 Nissan Titan Key (Print 2 Halves)

The key hole on my 2008 Nissan Titan key broke, so I designed this custom housing to securely hold the key and get it back on a key ring. This model is split into two identical halves— be sure to print it twice . The design includes: A…

Downloads
20
Likes
1
Rating
0
P
PrintablesKuberman

housing bluetooth speaker

The casing of my Bluetooth speaker started to stick, and I couldn't remove it using conventional methods. So I constructed a new casing. I printed the speaker grille as an infill without a base or top layer. So everyone can use whatever…

Downloads
18
Likes
3
Rating
0
P
PrintablesPeterSCP

Read housing for smartmeter

Read the data from a smartmeter with the Hichi IR TTL reading head and a WEMOS D1 Mini and display it in the browser. You can also process the data further with ioBroker.

Downloads
12
Likes
0
Rating
0
P
Printablesrendy cheng

BCN3D Sigma R17 extruder lower bowden tube housing

A direct replacement of Sigma R17 extruder lower bowden tube housing

Downloads
10
Likes
0
Rating
0
P
PrintablesTMBG

Rittal filter housing latch repair

This part was designed to fit on the Rittal 3243200 outlet filter housing. Its purpose is to repair instead of purchasing a complete new filter housing. 2 perimeters, 40% infill It fits snug on the remaining ”lip”, this version needs to…

Downloads
8
Likes
1
Rating
0
P
PrintablesM

E-Switch RA1 Housing

Housing for an E-Switch RA1 panel mount toggle. Pictured with the RA17131123 but should work with any of them. It should be easy to adjust the mount hole dimensions for other switches in the source files. Provides strain relief, access to…

Downloads
7
Likes
2
Rating
0
P
Printablespipersw

Housing for XY-SA30-W thermostat

Print in asa or abs for heat resistance. Non brim (included with the stl file), with support

Downloads
7
Likes
0
Rating
0
P
PrintablesDollaTom

iStart Automatic Sailboat Race Starter Housing Sled

The Balboa Racing iStart is a common fixture in small boat racing. Having used one both coaching, and in community sailing programs, I've also had to service a few of them. Batteries are intended to be “replaceable” by the manufacturer,…

Downloads
7
Likes
1
Rating
0
P
Printablesbollibe

Nunchuck Wii adapter for CNC motor driving housing REMIX of https://www.thingiverse.com/thing:951963

Nunchuck Wii adapter for CNC motor driving housing In order to pilot the 2 stepper motors of my OPENSCAN scanner, i use a wii nunchuck connected to the CNC shield of the arduino remix of https://www.thingiverse.com/thing:951963

Downloads
5
Likes
0
Rating
5
P
Printablespb-tec

Customizable parametric stable and waterproof electronics ip65 ip67 project box enclosure case housing

Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…

Downloads
13,597
Likes
1,533
Rating
4.94
P
PrintablesDL2MAN

Housing for (tr)uSDX QRP Transceiver

These are the housing files for the (tr)uSDX Radio. Print in PETG / 0,15mm Layer Height / 20-25% Infill Tap (cut M3 Threads) into upper/lower Wall before putting inScrews. UPDATE - 11 July 2022: Added new Bottom Cover for Slide On Battery…

Downloads
5,998
Likes
213
Rating
4.93
P
PrintablesLoogle

Gaggiuino - Gaggia Classic | Pro Touchscreen Housing and Funnel Plate Mount

Make sure to choose the correct plate version for your funnel (plate_GC_revised or plate_GCP_revised) Fasteners (to attach touchscreen housing): 2 M4x10 button-head screws 2 M4 nuts Loctite 242/243 or equivalent Recommended Print…

Downloads
5,650
Likes
251
Rating
4.95
P
PrintablesLoogle

Gaggiuino S3 Screen Housing (Gen 3)

There is one main screen housing design, multiple mounting options. The Front mount is compact and needs fewer parts but is at a fixed angle and can be low for taller people. The Rear mount takes up more space and uses more parts, but the…

Downloads
5,029
Likes
209
Rating
5
P
Printablespb-tec

Easy customizable / parametric electronics project box case enclosure housing by pbtec

Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…

Downloads
4,396
Likes
457
Rating
5

v3 - Google Home Mini Speaker Housing - Retro Modern - with Swappable Face Plates

v3 UPDATE NOTES: This will likely be the final iteration of this project. The biggest change with v3 is that I have optimized the files to allow for the use of threaded heat inserts. Everywhere that screws previously threaded into…

Downloads
4,305
Likes
2,714
Rating
4.84
P
PrintablesLoogle

Gaggiuino Component Housing

Notes: If you want to use this with an Arduino Nano build in a Gaggia Classic, please also print the Gaggiuino Optocoupler Case There are now two accessory parts: A stripboard mount and cable strain relief (see changelog). The stripboard…

Downloads
4,257
Likes
165
Rating
4.91

Creality Ender 3 V2 - Hotend Fan Cover / Housing / Duct

Update V2 +V3! You can get the new version with alot of improvements on Cults. https://cults3d.com/en/3d-model/various/creality-ender-3-v2-fan-cover-duct cheers! THE FREE MODEL YOU CAN DOWNLOAD HERE MIGHT NOT FIT SINCE IT WAS A FIRST TEST…

Downloads
3,605
Likes
161
Rating
4.4
P
PrintablesLoogle

GaggiaBoard PCBv3.1/v4 Housing (Gaggiuino)

Status: Released! Compatibility Warning! PCBv3.1 and PCBv4 (with onboard STM32 chip) are the only compatible PCBs. PCBv3 (which uses the WeAct BlackPill) is not compatible and should use the Protective Housing . Description This housing…

Downloads
3,432
Likes
137
Rating
5
P
PrintablesLoogle

GaggiaBoard V3 Housing (Protective)

This housing holds the GaggiaBoard V3 (PCBv3, PCBv3.1, or PCBv4) from the Gaggiuino project, with maximum coverage to protect from a potential water leak. Design intent is for the board/housing to go in the corner vertically behind the…

Downloads
3,136
Likes
172
Rating
5
P
PrintablesJeff Chen

PS5 USB Cable Housing In Various PlayStation Controller Connector Styles

Introduction I'm sure everybody has seen the beautiful 30th anniversary PS5 Pro release . The USB-C cable housing they included for the cable was a very cool design, so I thought maybe us existing PS5 owners can also share some of that…

Downloads
2,761
Likes
833
Rating
4.71
P
PrintablesLoogle

ToFnLED Housing (Gaggiuino)

This housing is designed to hold the Time of Flight and LED (ToFnLED) board for Gaggiuino over the water tank using magnets. The board slides in from the end, clipping in with the flex arm clip. If the board needs to be removed it can be…

Downloads
2,643
Likes
81
Rating
5
P
PrintablesLaisch

ESP32 Cam housing

Housing for ESP32 Cam modul (Tinker board) Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0,2 Infill: 100% Notes: After printing you can use female breadboard connectors with the plastic…

Downloads
2,509
Likes
279
Rating
4.19
P
PrintablesSchemen

OpenFormicaria - A Modular ant housing platform

OpenFormicaria A Open Source modular ant formicarium and home with simple space saving connectors. Updates/Changelog 2020.11.02 Added 6xGateway More space or broader attachement to other modules! 2020.11.01 Small fixes Added Connector…

Downloads
2,376
Likes
419
Rating
4.88
P
PrintablesILAN SABAR

Creality Ender 3 V3 KE Extruder Housing

I got tired of waiting for a warranty replacement extruder housing for the Creality Ender 3 V3 KE after it melted after a big blob of death on my friend's printer. So I reproduced the design on my own (in SolidWorks). I changed a few…

Downloads
2,275
Likes
333
Rating
4.5
P
PrintablesZzoyozZ

Bambu Lab X1 Housing Gap Cover

There are 2 gaps at the bottom of the printer housing (see picture). Filament particles may fall into these gaps and cannot easily be removed. This cover remedies the situation.

Downloads
2,150
Likes
391
Rating
4.92
P
Printablesdadul96

16x2 LCD Housing

Housing for 16x2 LCDs with an I2C controller on the back. The front panel is universal and fits all versions of the back-part (45° or 90°). Select the correct hole diameter for your LCD screen (M2 or M3) and the display cutout (big or…

Downloads
2,066
Likes
129
Rating
5
P
PrintablesDr. Failov

XT60 Plug Housing | Gen2

XT60 is often used as general purpose connector for low power devices and sometimes needed to connect XT60 to regular PVC 2pin 1.5 mm^2 cable. This adapter allows esthetically connect XT60 on the same way as it done in regular AC socket…

Downloads
2,038
Likes
824
Rating
4.73
P
PrintablesKen226

Voron 2.4 Touch Screen Housing for BTT Pi TFT50 V2.0

The screen is held into the housing using 4 m2.5x8mm socket head cap screws. The housing attaches to the Voron 2020 rail using the default m3x8mm socket head cap screws. This screens screw pattern is too wide to accommodate the default…

Downloads
1,960
Likes
326
Rating
4.91
P
PrintablesLMaker

Creality K1 - Hepa + Active Carbon filter housing

Creality K1 - Hepa filter housing This design has been created to place a hepa filter on our Creality K1 printer using Xiaomi washable hepa filters Other mods for Creality K1 You can buy me a coffee with a donation. Me puedes invitar a un…

Downloads
1,924
Likes
313
Rating
5
P
PrintablesJuzz Wuzz

Shelly Mini Housing

A compact housing that will fit the Shelly Mini Gen 3 series. Two options for the base, one with 6mm holes and another with 8mm holes for thicker power cables. The lid works for either base. Allow you to mount the unit and two WAGO…

Downloads
1,791
Likes
333
Rating
4.94
P
PrintablesThe Stock Pot

Aqara T1 Recessed Housing

Designed to fit inside a 20 mm hole drilled into a wooden door, with a matching recessed magnet in the door frame. Once installed, the sensor is completely hidden while retaining the reliability, battery life, and Zigbee support of the…

Downloads
1,767
Likes
383
Rating
5
P
Printablestimkrins

XT60 Plug Housings

A set of covers for a straight-through XT60 connection (mainly so I can avoid shrink tubing). Has 2 separate 4mm diameter wire holes. The fit is a bit loose but suits my requirements. I printed on a raft - without one, you may need to cut…

Downloads
1,723
Likes
283
Rating
4.95
P
PrintablesShakky4711

DC-5521 Connector Housing

Connector housing for DC-5521 / DC5521 low voltage connectors. I did not like that there is no strain relief when attaching cables to the typical DC-5521 connectors you get on eBay or Amazon, so I designed these housings. I left the area…

Downloads
1,557
Likes
806
Rating
5
P
PrintablesAstroStock

Anderson style (SB50) 50 amp connector housing

I created these parts to mount an Anderson Power style (SB50) 50 amp connector on the side of a battery box build. It is comprised of two components, the base plate and the top cover to house the SB50 plug. The components feature a small…

Downloads
1,495
Likes
111
Rating
5
P
PrintablesLordOgreCorsair

Adjustable Mold Housing for Silicone Molds Making

They can be assembled with binder clips to form different sizes of rectangle and different sizes of squares by different combinations for different size molds. Can be stacked to make taller mold.

Downloads
1,467
Likes
214
Rating
5
P
PrintablesReismann

Shelly Plus - Power Cord Housing

Within this box fits a Shelly Plus (1, 1PM, 2PM) and two WAGO 221 connection clamps for easy cable connection. Cables are secured by two printed cable clamps. I used threaded inserts from ruthex in size M3 for the screws. (For Shelly Plus…

Downloads
1,353
Likes
236
Rating
5
P
PrintablesSirNut

Ender 3V2 X Axis Tension Housing

Somehow my factory tension housing cracked and I wanted to just print a replacement vs buy something GalvanicGlaze on Thingiverse posted a basic external shell which I modified to have the appropriate internal components for the…

Downloads
1,293
Likes
75
Rating
5
P
PrintablesK2DP2K Ja

JK Inverter BMS Board Housing

Housing for Interfaceboard

Downloads
1,227
Likes
33
Rating
4
P
PrintablesBowieinc

Project Access Panel Battery Door Cover and Outer Housing

Here are both pieces required to integrate into your project that needs access after making for battery replacement, on/off switches or storage. The cover or door itself was heavily influenced by https://www.thingiverse.com/nimaid 's…

Downloads
1,221
Likes
658
Rating
5
P
PrintablesScootworks

Wago 221 inline for 2020 extrusion housing

This simple housing lets you mount your Wago 221-2411 nicely on a 2020 (or 3030) extrusion. No special printer settings are required, but I recommend ABS/ASA material, especially when you are working with a heated chamber. BoM: 1x housing…

Downloads
1,141
Likes
446
Rating
5
P
PrintablesAndroxilogin

ESP32-CAM with ESP32-CAM-MB Housing

So I bought a few ESP32-CAM & ESP32-CAM-MB boards with those cheapo 3MP OV2640 lenses for simple uses, such as seeing when the mailman comes. If you'd like other options than the simple example code offers from the Arduino IDE and SD card…

Downloads
1,020
Likes
66
Rating
4.5
P
PrintablesDokrull

Acetech / Xortech Airsoft Tracer Housing

This is a replica of a real steel suppressor, that could house the Acetech or Xortech Mini Airsoft-Tracerunit. There is a long an short version with a crown or flat end. Keep in mind, the crown version is better to be printed on a resin…

Downloads
987
Likes
112
Rating
5
P
PrintablesNightHawk

XT60 Plug Housing for Power Supply Cable

I designed this plug cover to use an old 20V HP 140W laptop power supply for my tiny e-lab and for my testbench. No shrinking tube needed. Superglue required to glue the plug into the housing. Printing Instructions Prusament PETG Urbay…

Downloads
971
Likes
206
Rating
5
P
Printablesnerdyhobby

MC4 solar panel cable housing

I have portable solar panels in my VW camper. I have designed this housing to fit MC4 connectors for incoming power from the solar panel. This is used for indoor mounting. You can fit O-rings on the MC4 connectors but this does not have a…

Downloads
943
Likes
160
Rating
5
P
PrintablesBernd

MSPA filter housing for filterballs/Filtergehäuse für Filterballs

The filter is for the new paper filters with combined filter and return, please print the version with open lid. The filter can also be used for the older whirlpool types with separate filter and water inlet, but you will need the adapter…

Downloads
935
Likes
47
Rating
5

Google Nest/Home Mini Housing

A 3D-printable housing for your Google Home Mini smart speaker. Gives it some extra character and a modern look. UPDATE 3/13/2024 Added 6x3mm magnets to attach the pieces, and increased the size of the hole for the cable. New files are…

Downloads
931
Likes
325
Rating
4.22
P
Printables⠀

dualsense ps5 back shell/housing 3d scan

it's just a scan, not optimized for printing

Downloads
899
Likes
112
Rating
0
P
PrintablesCritterNinja

Elegoo Centauri Carbon Improved Filament Runout Sensor Housing

This is an improved runout sensor housing for the Elegoo Centauri Carbon that uses 2 PC4-M6 pneumatic fittings on either end so you can directly connect a Boden tube to it. You can benefit from this if you use an external dry box, or…

Downloads
894
Likes
168
Rating
4.78
P
Printablesderebbe

Mini 12864 LCD Display Housing for 2020 V-Slot

Housing for the fysetc mini12864 LCD Display that can be mounted to 2020 vslot extrusion. To make the reset button work you have to replace the tactile switch button by a lower profile version. This requires some experience with…

Downloads
889
Likes
89
Rating
4.83
P
PrintablesKen226

BTT TFT35 SPI V2.1 Touch Screen housing Voron 0.2 Version 2.0

User Smuk3d asked me if i could create a version of the TFT35 Voron 0.2 housing that moved the viewable area of the screen to center, and allowed for a more symmetrical bezel. It was alot of work and required a 90ish percent redesign of…

Downloads
887
Likes
135
Rating
5
P
PrintablesFREDICVSMAXIMVS

Raspberry Pi camera housing

This is a housing for the Arducam OV5647 camera for the Raspberry Pi. It also fits the Raspberry Pi camera V2.1, and other cameras with a similar format. The camera should easily fit into the back part and the front attaches with a…

Downloads
874
Likes
83
Rating
5

RGBtoHDMI adapter housing for Amiga 500

This is a non destructive way of fitting a HDMI output to the Amiga 500. Adding the RGBtoHDMI adapter to the original Amiga 500, gives it the ability to deliver a perfect digital HDMI output. When the small board is fitted inside the…

Downloads
830
Likes
36
Rating
5
P
PrintablesKampflafer

Airsoft Tracer Housing

I did not like the look of commercial available Tracers so i designed my own. Housing for the Begadi Tracer Unit (00821110SET). 14 mm CCW Thread. For the best fit and look print with Resin, FDM works as well. If you need other mounting…

Downloads
814
Likes
153
Rating
4
P
PrintablesTim Angus

DB9, DB15, DB25, DSUB Connector Low Profile Housing Shell Backshell

Low profile housings for old school DB style connectors, with a variety of holes for cable sizes. They snap together and don't need any nuts or screws. The numbers in the variations are the intended cable diameters, in millimetres.…

Downloads
809
Likes
36
Rating
5
P
PrintablesFISHINGCAT

Cr touch replacement housing

Model of the cr touch housing that is frequently broken when a print fails and hits it. I printed this on a resin printer with a 50-50 mix of anycubic tough ultra and siraya fast grey. This model might be a good starting point to build a…

Downloads
808
Likes
60
Rating
5
P
PrintablesAndrás Sümegi

AMASS XT30 Strain-Relief Housing – Slim, for Ø3.4 mm Cable (20 AWG)

Most XT30 housings on Printables are designed for bulky RC/drone battery leads, typically using 14–16 AWG silicone wire for relatively high-current RC/drone applications. I needed a connector housing for a much thinner cable — an aquarium…

Downloads
743
Likes
437
Rating
5
P
PrintablesMerasil

DIN Rail Housing (stackable)

I needed a custom housing for my DIN rail to hide my own boards or switchable actuators. This is my first design and I hope it helps someone. The basic idea is to print several core elements (stackable) and one cover each for top and…

Downloads
739
Likes
72
Rating
5
P
PrintablesAcoustic Lemur

XT30 Plug Housings

Remix of XT60 Plug Housings resized to fit TX30. I printed it in TPU and the fit was really snug, non-flex materials might need ~1% upscalling.

Downloads
735
Likes
99
Rating
5
P
Printablesfrdmn

SKR Mini E3 v3 + Raspberry Pi front housing for Ender-3 (v1)

While searching for a clean front housing that fits my SKR Mini E3 v3.0 as well as my Raspberry Pi, I stumbled upon tony.tubb's incredible and well-designed case that however only fits the Ender Pro (that comes with the 4040 Y-axis…

Downloads
725
Likes
92
Rating
5
P
PrintablesKen226

Voron Switchwire BTT TFT35 SPI V2.1 Housing

This is a screen case for the BTT TFT35 SPI V2.1 that BigtreeTech introduced for their CB1, Raspberry Pi alternative. The CB1 has the drivers for this display built-in. The Screen sits a couple millimeters below the level of the housing…

Downloads
723
Likes
103
Rating
5
P
PrintablesBigby

D-SUB Connector Housing

This is a simple housing for 9 and 25 pin D-SUB connectors. Other sizes might follow. I needed such a housing for a current project and I couldn't find any I liked. Currently, the housing is strictly symmetrical. So you just need two…

Downloads
711
Likes
48
Rating
4.6
P
Printableslukeslabonline

USB Camera Housing

Simple case for Luke's Laboratory Camera. Comes with “go pro” style mounting for 2020 frame, but also blank step to create whatever mount you'd like. Get the Camera here: https://lukeslabonline.com/products/usb-camera-1080p Needs at least…

Downloads
689
Likes
78
Rating
4.83

Honda Civic Key Fob Housing Replacement

This key has been tested on the following models and years: 2007 Civic 2009 Civic 2nd gen Honda Fit 2014 Odyssey It will likely work on all 8th generation Civics which run from 2006-2011. If you have success for a year not listed, please…

Downloads
680
Likes
54
Rating
5
P
PrintablesKen226

Voron 0.2 TFT35 SPI V2.1 touch screen housing

Disclaimer: I used BTT's CAD model and the Voron 0.2 CAD models for dimensions. I don't own a Voron 0.2 or a TFT35, but Printables member Eric Ebert, who assisted with many of the features of this design Printed and test fitted a couple…

Downloads
676
Likes
133
Rating
5
P
PrintablesHondanickx

Air Compressor Filter housings

I've made these air compressor filter housings to replace the cheap original ones with one that flows more air and makes less noise.I've found out that the cheap ones have lots of flow obstructions and could be improved on significantly.…

Downloads
643
Likes
68
Rating
5
P
PrintablesSerhan KIYMAZ

Waveshare ESP32-S3 Touch LCD Housing & Magnetic Stand

Waveshare recently released a new ESP32-S3 screen. Model name: ESP32-S3-Touch-LCD-4.3 . I'm using this screen for my openHASP installation. You can find .ini file here . I didn't have courage to do the soldering job for backlight as…

Downloads
640
Likes
40
Rating
5
P
PrintablesRickayLee

2003 to 2005 fits Honda Key Fob Remote Housing

This part prints with PETG better than PLA but both will work. PETG seems to stick to the build plate better. You will need 5ea 2-56 Socket Head Cap Screw 3/8" long. It also reuses the screw from the old case but it will not hold the case…

Downloads
636
Likes
51
Rating
5
P
PrintablesSulya

Dyson Mini Turbo 967479-01 96747901 belt housing T112750

Dyson Mini Turbo 967479-01 96747901 belt housing part T112750 supports needed This part was broken when the mini turbo brush of my Dyson V9 started to rattle I printed it in PLA and after a year it is still going strong Category:…

Downloads
633
Likes
24
Rating
4.5
P
PrintablesSten

ESP32 Audio Kit V2.2 Housing

The housing was made for the AI-Thinker ESP32 Audio Kit V2.2 A405 (but should fit for the other variants of the V2.2 kit too). SD slot, USB connectors, audio jacks, both MICs, the LEDs and all pushbuttons are accessible. The RESET and…

Downloads
630
Likes
32
Rating
0
P
PrintablesLMaker

Anycubic Kobra S1 / S1C - Hepa + Active Carbon filter housing

To make our printing a little safer, I designed this small box to house a HEPA filter + activated carbon, fully integrated into our printer, easy to make and economical. The following materials are needed: 1 unit - Active Carbon filter 1…

Downloads
627
Likes
165
Rating
5
P
PrintablesMake'n'Modify

1.3'' OLED EC11 Display with Encoder and Buttons Housing

A housing for the cheap 1.3'' OLED Display (SH1106) with Encoder EC11 like you find them on Aliexpress: https://s.click.aliexpress.com/e/_c37Z1MCx The housing is designed to take up the least amount of space. It is designed to work with…

Downloads
618
Likes
53
Rating
5
P

Arduino Pro Micro USB-C housing

A housing for an Arduino Pro Micro USB-C clone. If you purchased your Pro Micro recently, please use the updated files. You can tell by the way way the USB-C port is positioned -- if it's centered on the board, use updated files, if it's…

Downloads
618
Likes
54
Rating
4.83
P
Printablespedrolamas

Ender-3 V2 Front Electronics Housing

Based on the awesome work of Synyster1911 here: https://www.thingiverse.com/thing:4812842 UPDATED 03/09/2021: The "_v49" have the box lowered 2mm so that the covers are aligned with the extrusions, the rest is identical to the original…

Downloads
611
Likes
180
Rating
4.6
P
PrintablesHD_Creator

Meshtastic Heltec V3 housing with space for GPS and battery

Usecase Meshtastic is a open source community project that aims to provide a off-grid, decentralized, mesh network that runs on affordable, low-power devices. https://meshtastic.org/ This design offers a snap-housing for one of the…

Downloads
607
Likes
82
Rating
5
P
Printablestr8

Raspberry Pi Camera Housing (Pi Cam Case)

A snap fit housing for the Raspberry V1.3, V2.1 and V3 cameras. 2018-10-09: Made minor changes so that the v2.1 camera fits better. 2023-12-25: Enlarged hole in the housing for the V3 camera module. Added a housing with 90° rotated camera…

Downloads
606
Likes
48
Rating
4.67
P
Printablesataylor

Logitech Bearing Housing for G25/G27/G29

The internal bearing housing on my G27 broke, all the bosses that hold it to to the metal motor plate had snapped, so designed a replacement based off the original Logitech part. Due to the design of the part, its uses a lot of supports,…

Downloads
603
Likes
72
Rating
5
P
PrintablesReedy

Shelly 1 PM mini housing

Hello, I created a housing for Shelly 1pm Mini. You need 4 x m3 screws and 4 x threaded insert. You can simply clamp it between a cable. have fun with it! :) Print Settings Printer brand: Bambulabs Printer: Bambu P1P Rafts: Doesn't Matter…

Downloads
601
Likes
75
Rating
4.88
P
PrintablesAnverx

Housing for esp32 cam

Updated 27.03.2024 Pitch of the camera is now indexed in 8° steps. New files are marked with “27032024” Updated 18.06.2022 Added wall bracket variant to use with micro usb breakout PCB. Prinitng Case front and wall bracket have to be…

Downloads
597
Likes
94
Rating
5
P
Printablescalipsoii

TP-Link 1U rackmount housing for ER7206 router

Update 2023-07-03: I'm updating this model slightly after testing it in the real-world for a while: Added higher rails to each side to better support the back-end Switched to PETG as the heat from my rack caused the PLA to sag over time.…

Downloads
592
Likes
54
Rating
5
P
PrintablesA_R_B

IKEA Lack Housing Trash Bin Container :)

Klicks easy on my IKEA Lack printer housing to keep filament parts, paper and any other waste. Pull away and plug in in seconds as often you need it. Believe me: after a full year of usage you would never be without it. All these little…

Downloads
591
Likes
149
Rating
5
P
Printablesmodsmthng

different housings for GaggiMate LilyGo S3 AMOLED 1.75 inch, smthng housing 4

All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 Support my work: https://ko-fi.com/modsmthng Latest update (12 June 2026): Reduced the screw hole diameters, increased the wall thickness…

Downloads
584
Likes
25
Rating
0