The source marked this model as adult content.
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for one variant
- Downloads
- 49,247
- Likes
- 12,541
- Rating
- 4.75
38,150 models
The source marked this model as adult content.
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for one variant
See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this Gear Shift Fidget assembled stands on your own table…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
I also hopped on the 3D printed gravity knife craze, I just designed mine with a slightly different approach. The handle is slightly redesigned version of the beautiful Carrot Gravity Toy Knife remix made by Chris Klepel . Have you…
Print approx. €2.06–€2.51 excl. taxPreliminary estimate for one variant
A working replica of the Aztec Death Whistle from Ghostbusters: Afterlife Fixed errors from the original design . Printing Print with the eyes facing up, default orientation. Use support on the build plate only to avoid supports inside…
Print approx. €4.86–€5.93 excl. taxPreliminary estimate for one variant
3D Printed Diffusion Panels Before printing watch The Next Layer video, Jonathan's setup is amazing and it explains what you can expect way better than I could in this description. At 8.25" (209mm) this is the largest printable diffusion…
Print approx. €10.86–€13.28 excl. taxPreliminary estimate for one variant
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
I had problems with the original Blade not locking correctly, so i made the locking parts of the blade stronger.
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
BEST PRINTED WITH PETG I modelled this in Blender while making sure it can function when printed. All you need is glue to glue the two hinge parts together while inside the handle and blade. It should take around 4-5 hours for 100% infill…
Print approx. €3.59–€4.39 excl. taxPreliminary estimate for PETGSource material: PET
Please check your roll size before printing. My roll diameter is about 10.6 cm. If this is to small you can rescale the model in the slicer program I recommend to set supports just under the free arms (use support-blocker at other parts)…
Print approx. €6.66–€8.14 excl. taxPreliminary estimate for PETGSource material: PET
I designed this coin for games and as decoration for gifts. The coin has large details to be printed with most filaments. Also, they are placed so the coin can be easily printed without support. Use single coins as a gift wrap decoration,…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
This is a knife for Dummy 13. It is about 14x12mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :) If…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Description: Elevate your fidget game with a 3D printable Folding Karambit Knife Fidget Toy! This unique creation seamlessly combines a sleek design inspired by a CRKT style folding Knife with the satisfying functionality of a fidget toy.…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Instructions Install OpenSCAD (don't worry it's free and simple) Download NameTagGenerator.scad (below) and open it Edit name variable and then hit F5 followed by F6 (render), finally export the .STL file. Open NameTagGenerator.3mf…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Taylor Swift.
Print approx. €21.72–€26.54 excl. taxPreliminary estimate for one variant
Update #1: I updated the models to work better with the new method, and add new stand model. I tried to make the description and the solution in such a way that it could be done easily, without special program, and knowledge. Color…
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant
Simple stand originally designed for a Ubiquiti UniFi AP AC Pro Also confirmed to work with: UniFi Access Point WiFi 6 Pro U6-LR-US Possibly others? If it works on other models drop a comment and let me know! Snap fits into existing holes…
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for one variant
Tour eiffel d'environ 30cm en quatre pièces. Imprimé avec un pla gold de clorfabb en couche de 0.2mm Eiffel tower scaled to 30 cm and simply divided in four parts.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are stackable counters…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
QR-code fake WIFI password Links to Rick Astley - never gonna give you up
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for PETGSource material: PET
These are a portion of the files from https://blog.prusaprinters.org/mmu2s-printer-enclosure/ that have re-arranged/modified for printing on a Prusa Mini It doesn't include these parts because I assume you are enclosing a mini and don't…
Print approx. €2.07–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
This time it's a full redesign including the gears… And obviously in order to reduce the size, I had to make some compromises. So I no longer use ball bearings for the spider gears which are now directly on a tiny PLA axle. As the spider…
Print approx. €2.78–€3.39 excl. taxPreliminary estimate for one variant
Check out QR Code Stand → here ← Dimensions: Scan This to Try Out --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
With these holders, you can neatly store your Dyson accessories. Update: Added STL Files
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for PETGSource material: PET
This is a very Tiny Gift Box. It is sized perfectly to fit a pair of Prusa Nozzles. It can also be used as tree decorations or earrings. I added every type of file if you want to play with dimensions. I used a .4 nozzle and .2 layer…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
This is the new field box that is shipped with OF-M4.4 but in a 3D printer friendly version. This version takes advantage of the included magnets to hold the base securely as a lid. The box also includes slots that could be used to secure…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for PETGSource material: PET
Modern Telescopic Phone Amplifier: Stylish Sound Enhancement Product Description: Introducing the modern telescopic phone amplifier, a stylish solution for enhancing your phone’s audio experience. This innovative design features a…
Print approx. €7.38–€9.02 excl. taxPreliminary estimate for one variant
Based on the extraordinarily accurate model created by Thingiverse user kimgooni . I did some small invisible simplifications on the model to save a couple of hours of printing support structures. It results in 16 hours of printing with…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
Quick and easy to print. Print with 0,2mm layer and change colours at 3,2mm. Owl & baby owl keychain: link here
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
When I got my first 3D printer last year I wanted to learn to model in Fusion 360 and print useful stuff while also learning the capabilities and limits of FFF printing. So, in this design I was intentionally playing with overhangs and…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for one variant
I designed this water diffuser to avoid the holes created in the ground when watering, it allows to use higher flows. Its designed to be connected to a water quick connect. I printed it standing up with quick release connector facing…
Print approx. €3.89–€4.76 excl. taxPreliminary estimate for PETGSource material: PET
knife for throwning i think that slim look better
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
Just a simple desk stand for the Spotify car thing. Great for use with Desk Thing as well. Prints in just over an hour with the PrusaSlicer “Draft” profile. Made this quickly as I found Spotify car thing to be a useful device to have on…
Print approx. €1.85–€2.27 excl. taxPreliminary estimate for one variant
UPDATE 20.1.2024 - added versions - AP: LR / Pro / Nano / Lite Complete stand + mounting bracket for Ubiquiti Unifi AP. The model is All in one, so it can be printed as one piece without need for screws. You just click it on. In the 3mf…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
Wanted to make something more personal for candy giveaway. The clearence between the parts is made for PLA. Printed in GST PLA+ 2 perimeter and 0,2mm layer. The last Esun Silk Gold 2 perimeter and 0,2 layer. I painted the seem in the…
Print approx. €23.58–€28.82 excl. taxPreliminary estimate for one variant
Mounting bracket. Recommended to print with a 0.4 nozzle with a layer height of 0.2 or less! For material, something that's more resistant to heat than PLA is advised. Commenter @jornthree_2921709 recommends PETG or ASA. I've used a PLA…
Print approx. €0.81–€1.00 excl. taxPreliminary estimate for one variant
So my dad asked me to design something to bring the hot air from the bottom heating exhaust of his California Ocean to the pop-top roof bed more efficiently. While I found several heating adapters for the bottom exhaust where you can…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
English : Printed with the readable side laying on the print bed, in order to benefit from the good looking textured PEI sheet. Deutsch : Gedruckt mit der lesbaren Seite auf dem Druckbett liegend, um von dem gut aussehenden, texturierten…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
Hyper-K Micro Machine The Kei Drift Truck. Inspired by Japanese Kei cars. This is my own desing created from scratch. This model has steering wheels for drift action. Consists of 20 parts , Designed for easy printing without supports. I…
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant
This is a Hot Wheels / Matchbox 1:43 scale model of a 4-post car lift for displaying different size diecast cars. These snap together so you don't have to worry about extra hardware or glue. I've added added a wheel chock near the front…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
Changes It's markedly longer + Helps the guide establish a firmer footing + Helps so your hand is less likely to catch on the cardboard; cardboard cuts are no fun It's also taller (more space between the cardboard guide and the grip top)…
Print approx. €5.14–€6.29 excl. taxPreliminary estimate for one variant
I wanted the original to hold my knife, but it just looked too innocent. So I remixed it and made it look angry! Can be used to hold knives, pens, or use as a halloween decoration. You will want to print with supports for highest quality.…
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant
See attached .3mf project for information how to print particular parts or print them all in one.
Print approx. €6.53–€7.98 excl. taxPreliminary estimate for PETGSource material: PET
This is a knife holder on stand suitable to hold up to 5 knifes. It needs a bit of support touching build plate for successful print. It is made as single object to avoid adhesion issues or need for any additional material like magnets,…
Print approx. €17.84–€21.80 excl. taxPreliminary estimate for one variant
A clip to hold 5mm brake housing and 4mm shift housing together on your bike to keep things nice and tidy and rattle-free. Flat front design solves the problem where cables may pull away from each other ( see this design ). Also, its a…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Minimalistic design – light box for your gifts. Minimum of material – just two 0.2mm bottom layers and vase mode surface around made with standard 0.4mm nozzle. Fragile, but also translucent and quite attractive. The original design has…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Update: New Updated Model with a closing clasp, and a compliant mechanism ring holder insert! https://www.printables.com/model/769333-improved-gift-ring-box This print-in-place box with an insert for a ring is the perfect container for…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
Handy box cutter or decorative karambit knives - available in 2 sizes - 10 gram prints
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
I made a wall mount for Tapo C210 WiFi camera. It should work with other Tapo cameras because I think they have the same mount. Made it in 4 parts for easy printing. Easy to put together, glue recommended. There are holes for screws on…
Print approx. €7.46–€9.12 excl. taxPreliminary estimate for one variant
Llaveros del mundial de la Copa Mundial de la FIFA México/Estados Unidos/Canadá 2026 Creo que es un llavero que será muy comercial en los próximos meses, lo bueno que se puede combinar con una infinidad de colores. Son dos tipos de…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
Introducing the Flipper Zero WiFi Developer Case, meticulously crafted for seamless assembly with just a click and snap mechanism—no screws needed. The design ensures an astonishingly precise fit, marrying functionality with elegance in a…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
This is a hanging drift clip for 1/10 RC drift tracks. Prints in 4 parts. 1 upright - prints flat on the back with the feet pointing up. No supports needed. 1 crossbeam - prints on the side. Supports required under each interlocking…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Credits to manabun on Thingiverse for the great original design! Original: https://www.thingiverse.com/thing:2769344 I modded the design to be printable in a better position without support. The slot is slightly modified for an easier fit…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Summary Every year, my father would hide a gift for my mother in a small stocking-shaped ornament on the tree. (And every year she would forget to check the ornament.) I thought I'd create something that would allow others to join in this…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…
Print approx. €5.14–€6.28 excl. taxPreliminary estimate for one variant
IT WORKS! :) After dreaming this up for awhile, I finally got it to work! This is a swinging drift clip. The base and top come together in a 45 degree angle that allows the top to swing back to the straight position after hit. The holes…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
I adjusted the size of the knife a little so that it fits the goose better. printed with PLA 0.1 layer and some support I would be happy if you leave a feedback if you like the print :) and if you have special requests, suggestions for…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Mondoshawan : The Fifth Element.
Print approx. €14.05–€17.18 excl. taxPreliminary estimate for one variant
Can be printed without support
Print approx. €9.26–€11.31 excl. taxPreliminary estimate for one variant
A unique printable giftbox. You will need: 3 x M3*8mm socket screws 3D Printed Main Box 3D Printed Lid (there is a blank version and one with a heart) 3D Printed Heart Flag Directions: Print the parts Use screws to attach the flag and lid…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
use ❗PETG❗ or some flexible material (do not use PLA) Info: carabiner modification of my previous model this variation is more stiff (harder to open, harder to insert key ring through the gap) Dimensions: its height is 7,5 cm (bigger by…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated. Nozzle 0.4mm Layer Height 0.12-0.24mm (Recommended) No supports needed Scale it as you like :)
Print approx. €3.42–€4.17 excl. taxPreliminary estimate for one variant
Cette figurine représente Calcifer , le démon du feu lié par contrat à Howl dans Le Château ambulant . Avec son apparence de flamme vivante aux yeux expressifs et à la bouche souriante, ce modèle capture l'essence du personnage tel qu'il…
Print approx. €1.63–€2.00 excl. taxPreliminary estimate for one variant
This is a remix of Light Switch Lock by Yllonnoce on Thingiverse. I've removed the “no” symbol and removed the plastic behind the symbol to simplify it as much as possible. This design prevents flipping a light switch off, which is useful…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
New Thrustmaster TH8S gear lever Variations: TH8Sss1 v1 - no screw needed, just fold and push TH8Sss1 v2 - push, use screw, put part 3 on and then part 2 No supports. Perimeter: 5 Material: PET-G Layer: 0.1mm TH8Sss3 - thread printing,…
Print approx. €2.98–€3.65 excl. taxPreliminary estimate for PETGSource material: PET
I couldn't find a “key” that had both parts on it, so I sketched this one up
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
(ENG) Hi, I present to you a simple 18mm blade paper kinfe designed for 3D printing. All parts are designed to be as simple as possible for 3D printing. The cutter also includes a blade locking mechanism, preventing accidental hiding or…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Union Pacific toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy trains below). You…
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
RC Car V2: Updated 08/02/23 This is the differential I use in my RC car V2 design. It's a major modification of this design https://www.printables.com/model/246505-updated-rc-car-differential-gearbox Key things to know: I am now using 3…
Print approx. €7.73–€9.44 excl. taxPreliminary estimate for one variant
I've tried various filament clips and didn't feel fully content with any of them, so I decided to create my own. I noticed that the spools with the tiny hole on the rim can be used to insert the filament end and it works so well. Only…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Butterfly knife blade (Butterfly Comb / Balisong Comb)
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
zwei Akkus von Einhell in einer Hand tragen die Akkus können auch einfacher getragen werden, wenn sie nicht im Gerät sind ideal für 36V Geräte von Einhell, bei denen zwei Akkus benötigt werden die Kontakte der Akkus bleiben geschützt -…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
These dividers takes advantage of the slots in the design of the new Omnifixo M4.4 field box, feel free to make variations that suits your needs.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Within the cultural tapestry of the Red Sith, the ceremonial flint knife holds a pivotal role as a revered artifact in the intricate rites of passage known as "Vein Racing." or in some family lines as “Sithlume Ascension” This ceremonial…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
A basic model for quick and repeated printing. Key attribute is the blade which has been blunted so kids can play safely. Printed on a MK3S+ at 0.2mm quality, PLA, no supports, and 15% infill.
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
Printed with PETG but PLA should work aswell.
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
Printed in PLA with organic supports. Bracket attached with 3M double-sided adhesive.
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Custom flash diffuser for pop-up flash of Nikon D7200. Since version 2.2 it will fit other cameras as well due to the sliding slot: you only need one M3 nut and one M3x8mm screw. I used this fantastic design for the flash mount, many…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
Update 04.01.2024: I noticed a few mistakes, most importantly the screw size for the front tunnel, which is M3x12mm and not M3x10. I did some changes to the model because I noticed I was measuring the height at the wrong place. While I…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Folding hood to direct the outflow of air from your Xiaomi Air Purifier to be able to use it as a fan. The hood allows directing the air flow from parallel to the ground at about 60º upwards. A small key allows to fix the position of the…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Nest wifi pro wall mount I printed with Revo 0.8 nozzle for a quick draft it needs a bit of tweaking/adjustments. https://cad.onshape.com/documents/beec0a0fe06fb8f3ae976c52/w/4139866d5b9d0281fc830b03/e/5b17679e74c87ccdcb00e7b5 Update…
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
Just print with project settings. The knobs must be glued in the bottom part.
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Cable Clip for the Multifunction (Small) Arm mounting system Features Fits on the “ arm-small-hex-honeycomb-wall-compatible ” Fits 4.50mm diameter cables
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
this model is the dino from the no wifi game from google i original made it i suggest to print it in slower speed for the links it is a fun toy to play with or to give to sombody as a gift or for fun
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
I'm a bit lazy sometimes and I don't like having to look up the wifi password every time I have visitors. So I designed this “case” in Fusion 360. It was also my first time pausing the print to put something in and also doing a color…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Inspired in the new Ortofon Concorde MK2 model. Use the model with guide if you can, depends on if the broken finger lift has left a hole.
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Shifter magnet add-on for your Logitech racing wheel. I tested this on a G27, but it should fit any of the newer Logitech wheels. Files: Logitech Shifter Magnets: Standard version that fits a thin M3 square nut with 1.8mm thickness.…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
A perfect Valentine's Day gift for any couple. If you quarrel with your partner, there is no other solution than to a Sacrifice to the Old Gods. Material: Prusament - Pearl Mouse PLA / Mystic Brown PLA / Spectrum - Copper Pla Nozzle:…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
With my kids playing around the workshop, the risk of an impact on the workbench is very high. This simple stand prevents the differential of 6S Arrma vehicle from tipping over while doing maintenance, when you fill it and let it rest for…
Print approx. €2.71–€3.31 excl. taxPreliminary estimate for one variant
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The throwing knife has…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
A simple pipe, printable without support structures. Feel free to try out different sizes. 150% works best so far. At 100% you can only blow into it, the lips should not touch the pipe. Eine einfache Pfeife, druckbar ohne…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Update 2024: Download my new "SMG MK2" design here: https://cults3d.com/en/creations/fast-smg-mk2-vr-gunstock-quest2-quest1 UPDATE 2022: Finally compatible with Quest2. You just need to reprint the bottom body…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
https://youtube.com/playlist?list=PLcrufmroGYFnFEDnIxH_HovsyGvH1X6Ub Please make part number 1 “Traks" first because it is the most challenging assembly. https://www.prusaprinters.org/prints/99893-rc-tank-t-34-ps-231-1-tracks This section…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
This Mid-Century Modern Acoustic Phone Amplifiers uses a cone shape to naturally enhance the existing speakers on your phone. No hardware required, all dovetail slip-joint connections. The only component that requires any kind of support…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This gear should work on numerous 9x20 lathes available from Grizzly, Central machinery (Harbor Freight), Jet, and many others. This is an 80 tooth "sacrifical" gear - so called because the idea is that in the event of a head crash or…
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant
I'm posting the latest version of my design, as file update on an existing model seems broken… So disregard the other design as it is now missing some files… This new version has a simpler sun gear output axle (no screws, one single part…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Eyeballing the keycap profile is really annoying. Therefore, I went and did this tool to help you identify the correct row. This is meant for Cherry profile keycaps . Feel free to reference https://www.keycaps.info/ for the profiles. If…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Handy unboxing knife for your keychain with optional snap on cover
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
Unifi G4 Doorbell Pro Habe hier ein Halter für die G4 Doorbell Pro erstellt um die alten Schraublöcher zu verstecken. Am besten mit PETG/ABS/ASA drucken um die Haltbarkeit zu gewährleisten Viel Spaß damit
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for PETGSource material: PET