99 models
A simple Case for the NVIDIA Shield Remote. There are two versions, with access to the Netflix button and without: “With Netflix” to have the button NOT blocked “No Netflix” to have it blocked The back is flat so the remote can actually…
This honeycomb grid add-on fits the Aputure MC video lights . Due to it being friction mounted, there is no need for any modification whatsoever to the final print for it to stay attached. Just snap it onto the light and you're ready to…
A pre-made 3MF for Bambu Studio that has a swatch card and a modifier already set up.
I created these files for my Wood PLA Youtube video. After you open the file you can replace test wood plank with any STL file you like. Then resize, rotate and move the modifier to get the wood grain look that you want. I will add more…
UPDATED 2023-07-07 - version 1.1. Added new features and presets (for HueForge and a single-panel swatch aimed to use with colorimeter Nix Mini 2), plus a new set of STL (Nix Mini 2). The STLs for HueForge calibration can be found here at…
UPDATE: Added V2 with material removed for less filament use, raised wall height to keep from seeing the color of the last card, and put a slope in bottom of the vertical car holder to keep them tipped back. Inspired by Gloomhaven Battle…
Le support modifier est plus bas que celui d'origine pour avoir une meilleur vu de l'impression.
Motivation I finally got around to designing and installing my Honeycomb Storage Wall. Unfortunately, the first wall part I needed was on the bottom (border required) and I had a power outlet that started in this wall part and extended…
Main features Two-part (base and cover) parametric coaster. Fully customizable. Customizable modifiers for the parts. Several predefined grid types, that can be combined, and a do-it-yourself "infill" coaster cover using the modifiers.…
What I'm uploading is stl's but not ones you would usually choose to print! These are intended as negative modifiers to make it easy to place holes in your parts within a slicer. When I say slicer I'm focusing on Prusaslicer for obvious…
The main features Configurable size and rounding/chamfering (rounding inwards) of corners. 10 main areas for text Independent parameters for each text areas, including options for better printability and positioning, and full…
These models are simple to use, but the process is hard to explain with text. Please see a tutorial in this video:
This is entirely chuyskywalker 's work, I'm just sharing an optimized 3MF built in Bambu Studio 1.7.3.50. I love these containers and periodically use them to test new filaments on so wanted to share my optimizations. There are three…
Ever wanted the ability to hang that awesome print you found but realize the Designer didn't think of that? Yeah, me too! I was surprised that I couldn't find the kind of keyhole hanger modifiers I wanted “in the wild” already - lots of…
What I'm uploading is stl's but not ones you would usually choose to print! These are intended as negative modifiers to make it easy to place holes in your parts within a slicer. When I say slicer I'm focusing on Prusaslicer for obvious…
Scalable & Customizable Grid For Lights Modifiers (20x20 cm) You can easily scale this grid in your slicer to any dimensions. Scale it higher to create a tighter beam of light or lower for more spread. Mount with some quality duct tape or…
Modifier File to add fuzzy skin to the handles only. Not perfect but works quite well. The world coordinates for the modifier are X: 0, Y: 4.30 and Z: 8.39. Takes some time getting it into the right place so make sure it looks like the…
Ever since I started using my MMU3, I really loved the patterns on the purge blocks. It led me to start exploring with purge objects when printing fidget cubes and this only fueled my desire to control that pattern. I eventually created…
A grid or honeycomb can be fitted over a light source to help control the spill of the light it produces. They look like bees' honeycomb (hence being known as honeycomb grids) and are great for helping to make a beam of light that is soft…
This is the standard grip for the Hoffman Tactical Super lower 3.1 but with a modifier body to add fuzzy skin to the grip and not the upper parts that mate to the lower. The Prusa Slicer files have settings that I use already built into…
@ThorinOakenshield recently published a Medieval Cannon with realistic looking woodwork and on enquiry informed me that he used Onshape to achieve that. Frustrated I looked for ways to do that in fusion only to discover that it's only…
This is modified version of top standee part of counter . The changes are only on top counter part and enhance the original project with four slots for modifier tokens.
This model just contains additional height modifiers (and a scaled Z axis to height 60 mm) in 4 mm steps (15 steps total) to allow testing a lot of flow rates. To use, chose a layer width and layer height (I have a 0.6 mm nozzle, so I…
I wanted a sturdy modifier deck holder that lays the cards flat and i really like Reese Auxiliaries' Player Dashboard , so i remixed it removing everything but the deck holder itself.
A snoot is basically a tube that goes over the front of your light/flash unit and creates a hard, concentrated beam of light. A snoot allows you to light your main subject – without lighting the surrounding scene. And this can be great…
A set of magnetically mountable light shapers for Yongnuo YN685 flashes, consisting of a gel holder and a honeycomb/grid that reduces the light output angle to roughly 40°. The magnets used are widely-available 8x3mm neodymium ones (dia x…
What I'm uploading is stl's but not ones you would usually choose to print! These are intended as negative modifiers to make it easy to place holes in your parts within a slicer. When I say slicer I'm focusing on Prusaslicer for obvious…
In PrusaSlicer, for example, you can add it to your shape gallery. It can be used in a number of different ways: Add as a "part" to emboss the logo onto a flat surface. Add as a "negative volume" to deboss the logo. Add as a "modifier" to…
🐣 Easter Coloring Modifiers 🎨 This model set allows you to easily add Easter-themed decorations to your 3D prints! ✨ The pack includes eight different Easter egg decor patterns and a plain egg model to apply the modifiers on. You can also…
With these modifiers you can use your favourite infill-pattern for your Mini Filament Spool.
The STL locations should match up for easier editing! You only need about 2 layers of the artwork so scale the STLs to 0.4mm in height. The 3mf is for Bambu Studio or Orca Slicer. It has some 6x2 (6.25x2) negative cylinders and a pause…
Description mini Bowens mount speed ring for Godox light modifiers (soft box) Print instructions Printing info: Printed on Prusa MK4S, PC 0.20mm layers 50% cubic infill PC or other high strength filament needed to support weight of light…
This is a striped modifier mesh for the original 3DBenchy https://www.printables.com/model/2236-3dbenchy-the-jolly-3d-printing-torture-test-by-cre STEP file included for training purposes 😊
Never forget to add your +1s, -1, lethals, or target debuffs again. Double sided, a pattern around the outside indicates if the modifier applies to incoming or outgoing attacks. There are also tokens for marking units for things like Oath…
Honeycomb Grid for ULANZI VL49 – 3 Sizes This is a snap-on honeycomb grid for the ULANZI VL49 LED light . It helps control light spread and gives a more focused, softer beam – perfect for video, photography, or macro use. Features: ✅…
I needed a quick way to store assembled Profoto Modifiers like soft boxes & strips out of the way. So I used a tension rod, some bungee cords, and this adapter ring I designed. Uses minimal material to provide something to hook onto,…
1u modifier keycaps similar to F10 profile. Designed for use with an ortholinear split keyboard, caps feature a ISO symbol-esque labels inset to 0.6mm. Stems are MX compatible, but depending on your printer tolerances, you may need to…
To add heat inserts to your print, the print needs to have holes where these fit in. Either you add them in CAD or you could add them in the slicer. For the first step, Stefan from CNCKitchen offers STL and STEP Files on his website. Tips…
I did .2mm layer height and gyroid for my settings. I also just used PLA. if you would like to use a different pattern than “ THE BEST INFILL ” -gyroid, than you can just switch it in the settings after importing the 3mf file.
This is a remix of an adapter. The fit to attach to the Dremel Workstation is great, however, as I have a Modifier Pro heat tool that comes with a heat insert nut attachment it made sense to modify just part of the original design.…
This was made as an easy way to show increases to range/melee/tech/etc. Instead of adding it up each time you can put one of these on the main Vault Hunter card to keep an easy running total. If you have the ability, turn on ironing for…
Negative volume modifier to turn any model into a Maghex compatible model using 3x3 magnets. This modifier allows for easy insertion into any model. Steps for usage: NOTE: Steps given for PrusaSlicer. Add the model you wish to modify for…
Magnetic Diffuser Modifier for Godox V100 Flash This 3D-printed magnetic diffuser attachment is specifically designed for the Godox V100 flash light to soften and diffuse harsh light output. The diffuser provides professional-quality…
Honeycomb grid modifier for the Amaran Ace lights. The model uses magnets that snap to the magnets on the Amaran Ace. I'm including the full Fusion 360 file so you folks can make any modifications they want. The file has parameters for…
For large printers, this is one-piece and includes modifiers for using 100% infill where needed only using 40% filament!
Great for outdoors or where you can't bounce flash off the ceiling. Aim flash upward in bounce mode and it effectively enlarges your flash. Use white TPU for best results, if you print with a rigid filament, it will not slip over the…
This Snoot is a simple clip on (easy fit) model - prints wihtout supports, so suit Ulanzi VL49 series and Neewer 61 series light cubes. The opening size is 22 mm to give a soft spot effect. I printed in PLA as there is little heat from…
My personal project, where I store stl files for modificate another stl at Prusa Slicer! Enjoy it
This is a set of modifier files that can be used as stencils (quite like a cookie cutter) to turn models into puzzles. The set contains six different sizes at four degrees of (puzzling) difficulty. Additionally, the modifiers feature a…
I really wanted to add some covers to the top of our IKEA Vidja lamp because bugs can be a real pain, expecially in summer, expecially with two cats around. So I found the great top cover design by Jaapp , which fits perfectly and looks…
This 3D print is a coarse ‘egg crate grid’ style light modifier for the Aputure MC LED light, which friction fits over the silicone diffusor. Primarily, this limits the light spill to around 120 degrees, so it can be useful for…
Aeon Trespass is amazing and many of us like deluxifying it to no end! These 19 tokens are made to replace the game's original tokens used during combat. One advantage is how they feel more solid and hefty, and they will not wear down…
I remixed this from the Gloomhaven Play Dashboard found on Thingiverse. It is just the modifier deck section but has 2 slots on the back to hold blessing and curse cards as well. To print like I did to have the text a different color, it…
The original print didn't contain the source F360 file, so to make the print faster (by removing half of the inside height) I used F360 to make a modifier for PrusaSlicer to use as a negative volume. If you wanted to you could use this to…
Allows fitment of Bose headphone ear pads to Sennheiser headphones. (Tested with Sennheider HD206 and Bose QC15 headphones only - YMMV.) I bought some basic Sennheiser headphones (HD206) and found the ear pads thin and uncomfortable. As I…
I bought a couple of cheap Plastic Parasol Base from Argos to use with my garden parasols. https://www.argos.co.uk/product/8671637 However when I came to use them I discovered neither of the parasols I had (with pole widths 32mm & 37.5mm)…
In case you need screws instead of hooks
Beyond making your surfaces look nicer, this can serve a functional purpose too, by breaking up tension in the lower layers to reduce warping on long thin parts. To add this in Prusa Slicer, right click your model and select "Add negative…
I created these 40mm wide Tokens for the Traveller RPG game to help players keep track of their modifier penalty due to damage to their character. The tokens are double sided ; -1 on one side and -3 on the other side. The tokens are made…
Designed for use with mech miniatures from Catalyst Game Labs Battletech line. Base show the target movement modifier and the movement taken by the unit. Examples were printed on a Voron V0.1 in ABS at .15mm layer heights and 0.4mm…
I wanted something for Frosthaven (and all other 'haven games) that would hold: my Hand, Discard, Lost, used and unused Modifier cards. I was inspired by Gloomhaven / Frosthaven Ability Card Holder & Modifier Deck Holder for Gloomhaven…
A 10mm and 25mm “mouse ear” add these to your gallery of modifiers to use less materials on some of those fussy corners on prints. You can modify them for size or thickness easily, they started as .4mm tall.
These are tokens and a token holder I made for Warhammer Age of Sigmar. This page includes the insert with the slots for the carrying chest - however the chest is a remix of a cool model I found here on printables - the remix is available…
Turn your IKEA Tertial into a photography light This simple 3D-printed attachment turns the IKEA Tertial desk lamp into a more controlled directional light source for tabletop, product and close-up photography. The grid helps control…
This remix uses one 8x4 magnet on each of the legs. Magnets should be a tight press fit, no glue required. Used to mount on the top of a Spool Tank by Printer-box. Printed with PLA, but anything should work. Print as shown, no supports or…
A custom-designed honeycomb grid for the Ulanzi DG01 Cube Light – perfect for photographers who want more beam control from this tiny, powerful (cheap) light. The stock DG01 spreads light very widely. This 3D printed micro honeycomb grid…
This is a set of spacers to be printed out of Nylon to take up the over-travel in Cherry switch (blue) clicky keyboards. This makes the keys very fast! I believe this is what the blue clicky keys should have been from the beginning. More…
This model is for use as a negative modifier in a slicer. It works something like reinforcement in concrete. You can try and print it, but it most likely will not work. It is an 200 x 200 x 200mm array of 0,2mm diameter cylinders. When…
loads to make any 1/29 scale flatcar into something else
A small organizer to keep those slippery cards from sliding all over the place. Base: 73mm x 49mm x 11mm Top: 75mm x 51mm 11mm Loot lid is a 2 color print. Print the text then print the lid with 0.5 mm Z lift for the first 2 layers Print…
I first modeled and designed this flash modifier set for my Nikon SB800 Speedlight. The mount fits on the flash and the modifers attach magnetically to the mount for easy changing. The added benefit of using the magnets is that you can…
Description A remix of a remix of the Desiccant Spool holder, this 3mf file uses modifiers and process settings to close off the ends of the models while still allowing for full control over the mesh settings for the parts you do want…
Horizontal brick layers modifier Updates: 2026.09.25: I added "This Way Up" icons to the top of all of the modifier STLs because it can get very confusing very fast if you rotate a model. It is important that the modifier be correctly…
A modifier for prints to add a teardrop overhang relief in slicer. Useful for removing the need for supports from holes. The design is a 5mm diameter with a 90deg (two 45s) angle added to the top. This can be resized as needed when…
I wanted to try out the fuzzy skin modifier - it worked + happy with the results. I used Orca YMMV - the steps vary by slicer. Info for common slicers are readily searchable. Got the idea from here:…
A simple honeycomb flash modifier for 97mm diameter studio lights, although you can re-scale to suit and it'll likely fit anything within reason! I've found that my print slid nicely onto the light and didn't need an elastic band to help…
Want to add beautiful geometric textures to your 3D prints without changing the original model? These universal pattern modifiers are engineered to be stamped directly into your first layer! They work perfectly with my Foldable Storage…
Convenience die for action roll in Daggerheart. Roll this d12 along with your hope and fear die when performing roll and simply add up all the results without the need to go back and forth between your character sheet. All sides of this…
I took the drawings of the GoBidla adapater turning the 5203 312 rpm motor into a 6000 rpm motor by replaceing the 19.2:1 gearing down to a 1:1. I have successful tests with this motor and an Artifact shooting it 12 ft across the room at…
I adjusted the embossed text so it works with Orcas Slicer and other slicers. Should be fully editable and customizable. It is editable in Orca, Bambu slicer has the modifier as separate objects so you can assign a color. Prusa slicer…
Customizable Mailbox Sign – 80 × 30 mm This is a small 3D-printable mailbox sign designed to clearly indicate that you do not want advertising, flyers, junk mail, or similar deliveries. The original version uses the German text: “Bitte…
Convenience die for action roll in Daggerheart. Roll this d12 along with your hope and fear die when performing roll and simply add up all the results without the need to go back and forth between your character sheet. All sides of this…
modification pour mettre une bague de roulement en laiton
Convenience die for action roll in Daggerheart. Roll this d12 along with your hope and fear die when performing roll and simply add up all the results without the need to go back and forth between your character sheet. All sides of this…
Convenience die for action roll in Daggerheart. Roll this d12 along with your hope and fear die when performing roll and simply add up all the results without the need to go back and forth between your character sheet. All sides of this…
Convenience die for action roll in Daggerheart. Roll this d12 along with your hope and fear die when performing roll and simply add up all the results without the need to go back and forth between your character sheet. All sides of this…
Un tout nouveu disigne avecle logo de Cooler Master et un tout nouveau look !
I had to add a number of modifiers to allow this to be colored properly with the amount of layers required to not let the black bleed through. This is just a dump of the files I worked with, so I'm sorry if it's a mess. Please don't…
Convenience die for action roll in Daggerheart. Roll this d12 along with your hope and fear die when performing roll and simply add up all the results without the need to go back and forth between your character sheet. All sides of this…
Replacement base for the DF64E Coffee Mill. Intended to reduce fines, holdover, and overall messiness of the grind.
Few different attack modifier deck holders. A has space for the whole card deck at front, two shelfs for the lifted cards and a space for used card in the back. B has a space for the whole deck in the slanted part and a space for the deck…
I have provided a few different sizes (listed in "downloads") that can be scaled in your slicer to use as a modifier for debossing or embossing the V1 logo in your slicer. Please use it wisely in places that will make Ryan @V1Engineering…
Convenience die for action roll in Daggerheart. Roll this d12 along with your hope and fear die when performing roll and simply add up all the results without the need to go back and forth between your character sheet. All sides of this…
Convenience die for action roll in Daggerheart. Roll this d12 along with your hope and fear die when performing roll and simply add up all the results without the need to go back and forth between your character sheet. All sides of this…
The Problem Executing keyboard shortcuts (like Ctrl+C , Alt+Tab , or Shift+Click ) requires pressing multiple keys simultaneously. For users who type with one hand or have limited fine motor skills, this simultaneous action is often a…
Physical latches that hold Shift and the three modifier keys left of the space bar down, so you can type shortcuts with one hand. No software, works on every device you pair. Who it helps People who type with one hand (amputation, stroke,…
🇬🇧 EN (English) This is a 3D-printed acoustic horn designed to modify the frequency response (FR) of in-ear (IEM) and TWS earbuds. It adds depth, enhances bass, and changes the soundstage. ⚠ NOT designed for over-ear (full-size)…
Disclaimer : Since I don't own this Keyboard and originally wanted to partake the contest I designed it, but with AI assitance. I printed a small fitting part to check knobs functionality, but I do not know the fit on the original. Left…
